Airport Utility iPad 2

Similar Questions

• iPad can't connect to Airport utility

  iPad has lost its connection to the Airport utility, but other devices (Macbook Pro, iPhone) maintain their links with Airport utility.  Any suggestions?

  Hi bazzagi,

  I'm not sure I follow your question. I read that you be unable to connect to Wi - Fi or you can't really monitor your Wi - Fi network that is located on an Airport base station. Whatever it is, I have some information that will help out you.

  Start with connection Wi - Fi in general, take a look at the article below. Must you make sure Wi - Fi is enabled, reboot your device and you may even need to reset the network settings on your iPad.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  Now, if you are referring to the connection to the Airport utility application, then take a look at the article below. Must you either restart your iPad or you may need to set up the configuration of the airport again so it will be recognized.

  AirPort base station does not appear in the airport 1.3 utility for iOS
  https://support.Apple.com/en-us/HT203759

  Nice day

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• The airport utility reports incorrect

  Hello

  My Macbook Pro OS is El Captain worm 10.11.6

  Airport utility is worm 6.3.6

  2 x last Airport extreme firmware ver 7,7,7 connected by ethernet, one in bridged mode, another DHCP server.

  When I wake up my macbook and logon, then open Airport utility, both extremes have an exclamation point and the light orange, the message that opens essentially said along the lines of the device not found or not connected and there is a button to Forget. BUT the network works fine. This does not happen on my iPad. It looks like a bug to me, or is there a solution?

  We have seen the problems of this kind in recent weeks, but I think that it has been corrected by Apple. However, by chance you have one or both of your base station configured to use your Apple for Back to My Mac ID? If so, disable it to see if that fixes the problem.

  If this isn't the case, we can try other things.

• Time capsule works bur airport utility cannot find it

  Hello world

  I have a weird problem with my Time Capsule (2 TB) 2015

  I have the TC connected by ethernet to a modem, and it is plugged into my mac mini (cable as well)

  The TC works very well, it is accessible from the Finder, Time Machine works fine and all my devices can browse the internet via the TC wifi network.

  Airport utility, that the TC is shown as connected with a green dot, however when I try to access the settings of TC, that the system requires a password and when I entered it nothing happens. If I click on the TC once again, I get a requirement pw again. Once I do this once or twice, the TC greys out on airport utility and I get the message "device not found" with the yellow triangle.

  Despite this, the TC is always accessible from the Finder, the wifi works and Time machine is ok.

  Tries to access the site of the iPad or the iPhone displays the same behavior, the utility will continue to ask for a password and it won't let me.

  I did a reset of the TC by pressing the reset button and it worked fine for 24 hours, after which the above problem happened again.

  So I did another reset and even once, he worked for a while, but now I'm at square one.

  Is that what is anyone able to help?

  Thank you

  ALE

  AirPort Utility is based on both the mDNS (aka, Hello) and IPv6 IP protocols to find an AirPort base station.

  When access to the airport through the AirPort Utility, try the following, in order, accessibility with the utility check after each step:

  • Check the local connection. If you try to access the airport wireless, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
  • Make sure that the base station and your computer are configured for IPv6 link-local only.
    • For a Mac: System preferences > network > Wi - Fi or Ethernet > advanced > TCP/IP tab > configure IPv6: link-local only
    • For the AirPort Base Station:
      • From a Mac: AirPort Utility > select the base station > change > Internet tab > Internet Options... > configure IPv6: link-local only
      • Since an iOS device: AirPort Utility > tap the base station > press Edit > tap Advanced > tap on IPv6 > change configure IPv6 to: link-local only > Tap actually
  • The base station power cycle. Remove the power branch of the socket adapter and then wait 15 seconds before plugging back in.
  • Perform a ' default ' reset on the base station.

• Select the print with AirPort Utility

  When I launch the AirPort Utility on my Mac, I can choose to have the keychain remember my password, I would like to have a similar function on my iPad. I already use 1Password, is not a problem of memory, just more convenience. It seems that the fingerprint is the natural way to do it (I can open with a fingerprint 1Password), is it possible to configure the AirPort Utility - or maybe an airport specific - to accept a fingerprint authentication? Is there another solution of type "keychain" to do this on the iPad and iOS?

  -Thank you

  No, Airport utility does not support TouchID or it stores credentials.

• Why is it not my Airport Express recognized by Airport utility

  I recently bought a second hand Airport Express (2nd generation).  I gave him a second 10 reset, turned and opened the last Airport utility.  The airport reported no signs of an Airport Express, light orange just kept flashing slowly.

  In the end, I tried an Ethernet between my PC and the Airport Express and the device was picked up by the utility, I set to wireless, WPA, password, country, and anything else relevant.  After a power cycle with cable Ethernet has deleted the device worked perfectly, wireless streaming audio for my Hi Fi.

  If I had not had access to a PC with Ethernet I would not not have been able to establish the airport.  My old Airport Express (2nd generation) who bought new is recognized by Airport utility after a complete reset.

  Anyone know what may be missing in the implementation of the recent addition or what might happen here?

  When you say you have tried the 'later' AirPort Utility, it was for a Mac or an iPhone, iPod, iPad, etc.?

  If it's a Mac, after resetting the AirPort Express Terminal, you can get the running "Wizard" configuration by clicking the WiFi menu at the top of the screen of the Mac and then by clicking on the AirPort Express to the title of the announcement of the new AirPort base station.

  

  If you were using an iOS device, iPhone, iPod, iPad, etc... then you would press to go to the home screen, tap Settings (gear icon), tap on WiFi and tap AirPort Express under the title of the new Station of configuration database

  

  Did you use one of the methods above to get the configuration "Wizard" running?

  If you simply open AirPort Utility, after that the Express has been reset, it does not appear in the main AirPort Utility... unless you clicked the button other peripheral WiFi and then clicked on the AirPort Express to get the "Wizard" configuration running.  In other words, if the Terminal AirPort Express had already been settled until... it seems utilitarian AirPort. But, you would not have seen it in the main window of AirPort Utility since will appear here only devices that have been implemented.

• Is it possible to use the AirPort Utility software to configure the newest Airport Extreme on Windows 10?

  I ask because it seems to be warnings on the download page, saying that it is for Windows 7 and does not work with all the extremes of the airport.

  Airport utility is obsolete... Apple is more support the AU for windows, it seems...

  The old utility can still install in win10, but it is not until the the version specification AC TC that require an airport of v6 or extreme utility... That is to say a Mac with Lion or later... or the utility version iOS ipad or iphone.

  With your "pen name" iOSJake... I don't know that you have a suitable ipad... Simply load the free utility for the apple store and config airport away.

• Save the settings of AirPort Utility in the cloud

  I'm looking in the purchase of some Airport extreme or time Capsules. Can I configure the settings for them on a Mac and then these parameters record to the App on my iPhone or the AirPort Utility program on another Mac?

  No, but you can "Export" on your Mac configuration file, and then save the file on your Mac. Then you can "import" the file if you need to set up the airport in the future.

  like the iPhone and iPad iOS devices do not have this capacity.

• Airport utility requires "device password"?

  While trying to install on my iPad airport utility I wonder the "peripheral" password (' which may be different from the network password"). I tried the network password, but it wasn't the right one? What is the password for the device?

  You previously installed a router Apple AirPort using your Mac?

  If so, you establish a Base Station, or the password for the device for the router in the airport as well as a wireless network password.

  Do you still have the Mac?

• My AirPort Utility is not configure my Time Capsule

  Hello

  I just bought a Time Capsule and trying to set up, but it seems that my AirPort Utility is not set up. He continues to display an error message.

  Anyone have a similar experience and know the solution to this?

  What is the error?

  It can sometimes be a bit difficult.

  If you have an ipad or iphone... iPad is bigger is easier to work on...

  Download and use the version of iOS utility, because it is much more reliable than the Mac one.

  If you still have questions... Tell us available to the entire network.

• Time Capsule will not respond to Airport utility

  Here's my situation.

  I have a Time Capsule as my single wireless AP.  The led is green.  All my devices are able to access it without problem.  I can all the Time Machine backups on the internal drive.

  However...

  When I try to access the TC via the Airport on my MacBook Pro (10.10.5) utility I get the next series of notifications:

  (1) when the first attempts to access it, I get the message 'read settings on the Time Capsule XXXXX'

  (2) after a few minutes of this status, I get a yellow triangle with "Device Not Found.  XXXXX Time Capsule was previously part of your network.  Check that it is still within range of your network and it is plugged into a power outlet.  Forget this device removes this network (button) [FORGET]

  When I try to access to utility Airport on my iPad Air (9.2), I am able to access the information about the hardware, but no matter how many times I enter the password, I have no answer.

  The device is not in a convenient place for a direct ethernet access, but it is possible.  Can anyone think of a reason why I can't access via Airport utility?

  Thanks in advance for any help.

  If you did not do a complete network feeding cycle in a while, now would be a good time to do this.

  Turn off all devices on your network..., modem, router, computers, accessories, etc... in any order you want

  Wait a minute

  Start the modem first and let run for 2-3 minutes

  Then begin the next device connected to the modem and let it run for a minute

  Keep a minute out one at a time until the entire network is back of boot devices

  Recheck the network and AirPort on your Mac utility

  Report on the results

• Airport utility can't find my TC

  When I try to configure my new TC of T3, he appears as a router (not a base station) in the WiFi menu in the main menu as "GPS Wi-Fi-netvaerk" requiring a WPA2-password. Airport utility does not. It's as if it was only one recycled already configured TC. What should I do?

  I don't think I understand your question very well.

  But the way around the problem is the complete reset of the TC and start again... Here are my basics of installation.

  There are some things that are important. IPv6 is always an important issue so make sure you use a link-local only in my point 6 below.

  Also using iOS version airport utility is often more effective than a Mac. Just download airport utility from the app store for ipad or iphone...

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

• I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility? The Express flashes an orange light.

  I have an AirPort Express 802.11n (I just got 1st generation) who does not appear in Airport utility?

  The Express flashes an orange light.

  I tried to reset to factory by using a paperclip for a little more than 10 seconds (green LED flashes).

  The Express flashes a light - orange after the reboot - that seems normal to me.

  I use an iPad or MacBook Pro (without port cat 5) set up.

  I would like to extend my WiFi network and stream of music with it.

  Read the manual and did some research but I'm stuck.

  Thank you for taking the time to help...

  NOTE: I also have a second generation version which works very well.

  Let us first make sure that you really have a 1st Gen AirPort Express. To do this, look for the model number on the side of the Express. It is difficult to see, with grey lettering on a white background, but the number starts model with an 'A' followed by four digits.

  You do not want to see A1264... not A1084 and A1088.

  Share your findings.

• Download Airport utility

  Tried to download the Airport 6.3.1 utility for mac, but get this: "Airport utility cannot be installed to this disk. Th version of Mac OS X on this volume is not supported. "I have MAC OS X 10.11.6

  You already have a newer version 6.3.6 of AirPort Utility installed on your Mac... Since the AirPort Utility is part of the Mac operating system.

  Open Finder > Applications > utilities > utility AirPort to confirm.

  6.3.1 airPort utility could only be installed if you are using a much longer operating system on your Mac.