AIX to Linux migration path

Similar Questions

• Linux migration

  Hi Experts,

  could you please share your experiences/problems encountered in AIX to Linux migration (oracle 11 g 2).  I would be very grateful if you provide the necessary measures for migration...

  Thanks in advance,

  Richard

  MOS Doc 1156586.1 magazine for the kernel, settings and other parameters.

  deprecated/obsolete init.ora parameters are documented - behavior changes after the Oracle database upgrade

  If you do not use the latter in your current instance, you should be good from the point of view init.ora.

  It is best to perform a test migration/upgrade using a copy of the production database and hardware to determine what issues you may encounter, before actually attempt this in production. What is your database and how much downtime can afford you?

  HTH
  Srini

• EBS R12 hp ux to linux migration

  Hello
  Can anyone suggest me all the documents for EBS R12.0.6 DB 10.2.0.3 HP ux to Linux migration
  
  Thanks in advance
  Phani

  Salvation;

  Please see:
  DB from AIX to Linux migration

  See also:
  Migrating applications platform with Oracle E-Business Suite Release 12 [438086.1 ID]
  Export/import process for Oracle E-Business Suite Release 12 using 10gr 2 [454616.1 ID]
  General notes on the E-Business Suite Release 12 [986673.1 ID]

  Oracle E-Business Suite Upgrade Center - Plan [ID 461709.1]

  Respect of
  HELIOS

• migration by expdp/impdp db to AIX and Linux. Impdp errors, help.

  Hi, I did complete expdp (11 GR 1 material) and complete impdp (11 GR 2) migrate db from aix to linux.
  
  I have the following questions in mind:
  (1) I checked the imp papers and found a lot of mistakes. I think that most can be ignored, but I just want to be double sure before that I release the new db migrated for use. Is there a better way to avoid these mistakes?
  
  
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" MVIEW$ _ADVSEQ_GENERIC ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" MVIEW$ _ADVSEQ_ID ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" REPCAT$ _EXCEPTIONS_S ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" REPCAT$ _FLAVORS_S ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" REPCAT$ _FLAVOR_NAME_S ' already exists
  ORA-31684: SEQUENCE object type: 'SYSTEM '. "" REPCAT$ _REFRESH_TEMPLATES_S ' already exists
  ......
  Table 'SYSTEM '. "" REPCAT$ _AUDIT_COLUMN "exists. Data will be added to the existing
  table but all dependent metadata will be ignored because the table_exists_action a
  ppend
  Table 'SYSTEM '. "" REPCAT$ _FLAVOR_OBJECTS "exists. Data will be added to the existin
  Table g but all dependent metadata will be ignored due to table_exists_action of
  Add
  Table 'SYSTEM '. "" REPCAT$ _TEMPLATE_STATUS "exists. Data will be added to existi
  ng table but all dependent metadata will be ignored due to table_exists_action o
  f add
  .......
  Treatment of type of object DATABASE_EXPORT/SCHEMA/VIEW/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRAN
  T
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_WORKLOAD ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_FILTER ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_LOG ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_FILTERINSTANCE ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_RECOMMENDATIONS ' already exists
  ORA-39111: Object Type dependent OBJECT_GRANT: 'SYSTEM' ignored, base object type
  VIEW: 'SYSTEM '. "' MVIEW_EVALUATIONS ' already exists
  ...............
  
  . . imported 'SYSTEM '. "" REPCAT$ _TEMPLATE_REFGROUPS ' 5,015 KB 0 rows
  . . imported 'SYSTEM '. "" REPCAT$ _TEMPLATE_SITES ' 5,359 KB 0 rows
  ORA-31693: Data Table object 'SYSTEM '. "" REPCAT$ _TEMPLATE_STATUS ' failed to load/u
  nLoad and being ignored because of the error:
  ORA-00001: unique constraint (SYSTEM. REPCAT$ _TEMPLATE_STATUS_PK) violated
  . . imported 'SYSTEM '. "" REPCAT$ _TEMPLATE_TARGETS ' 4,937 KB 0 rows
  ORA-31693: Data Table object 'SYSTEM '. "" REPCAT$ _TEMPLATE_TYPES ' failed to load/United Nations
  load and being ignored because of the error:
  ORA-00001: unique constraint (SYSTEM. REPCAT$ _TEMPLATE_TYPES_PK) violated
  . . imported 'SYSTEM '. "" REPCAT$ _USER_AUTHORIZATIONS ' 4,773 KB 0 rows
  . . imported 'SYSTEM '. "' SQLPLUS_PRODUCT_PROFILE ' 5,140 KB 0 rows
  . . imported 'SYSTEM '. "' TOAD_PLAN_SQL ' 4,859 KB 0 rows
  
  
  (2) in addition, I've seen a few new users 11 GR 2 is not in 11R1, I should not worry update these users, right?
  
  Thank you in advance.

  You receive the ORA-31684: SEQUENCE object type: 'SYSTEM '. "" MVIEW$ _ADVSEQ_GENERIC "already exists, because the SYSTEM object already exists. You can ignore this error.

  You can also view links below

  Cross platform Transportable Tablespace with RMAN
  http://www.oracleracexpert.com/2009/08/transportable-tablespace-export-import.html

  Import/export transportable tablespace on the same endian platforms
  http://www.oracleracexpert.com/2009/10/cross-platform-transportable-tablespace.html

  Hope this helps,

  Concerning
  http://www.oracleracexpert.com
  Block of Corruption and recovery
  http://www.oracleracexpert.com/2009/08/block-corruption-and-recovery.html]
  Redo log corruption and recovery
  http://www.oracleracexpert.com/2009/08/redo-log-corruption-and-recovery.html]

• Travel power (AIX) to Linux (PureApp) questions Documaker

  Hello

  I was wondering if there are documents with respect to the facilities of Documaker migration from one server to another.

  We are looking to move our DM SE 11.3 and 12.x moved from AIX to Linux.

  Is the recommendation to make a new installation on the new server for each version or can we simply move from one to the other?

  Thank you!
  
  

  The binaries on these platforms are different, so a single copy will not work. You should be able to copy your settings and MRLS, adjust these do match if directory names change and then tap a Documaker installed Linux system. Assuming that you are talking about standard edition and not business.

• 3.5 to 5.0 migration path

  We have two hosts running esx 3.5 with vCenter 3.5 and wish us migrate 5.0 ESX host to vCenter 5.0 with two of the nine.

  What is the correct migration path to make it work?

  Is it possible to have host ESX 3.5 and ESX 5 hosts two same LUN access if they are on install it / data center totally different?

  Thank you

  Jimmy

  Yes - the new ESXi hosts should be able to detect on ESX 3.5 data warehouses as much as they are presented on the news using the same ID LUN... also if you want version VMFS VMFS-5 - 3.5 ESX host will be a problem to access data warehouses

  Useful KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005325

  ~ Stephanie Sai

• Migration path from 32-bit vCenter Server 4.0 to 64 - bit vCenter Server 4.1?

  I'm having a hard time coming up with a migration path that will get me to my existing vCenter Server 4.0 (Windows 2003 32-bit), to vCenter Server 4.1, what I understand is 64-bit only.

  My current vCenter runs in a guest on a 64-bit hardware, so from a point of view of "hardware", I have no problem.   But I can't get Windows 2003 32 - but to 2008 R2 64 bit in place.  I could build a new server, but I am at a loss on how to migrate from my old server vCenter function to the new.  Several instructions simply said to import and export the sql database - which I am not convinced that I can do without explicit instruction (no mssql expers here).

  I hope that there is a simpler way.  Maybe if I could set up a new 64-bit server, bind them, leave it to move data across and decomission one 32-bit?  (I don't know if the vCenter Server linking works this way).

  Any suggestions, or paths of existing documented migration that could help me?  I'm a little confused as to how to address the issue.

  Thank you

  -Ken

  The important question is where you vCenter data stored? Using SQL Express, a local SQL Server or a remote SQL Server? All information related to your vCenter environment is stored in the database - so if you build a new vCenter server all you need to do is the Connector ODBC to point to the existing database and when you install vCenter 4.1 the data base will be get upgraded.

  See section 5 of this document http://www.vmware.com/pdf/vsphere4/r41/vsp_41_upgrade_guide.pdf

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• RMAN restore from AIX to Linux

  Can Hello I restore a backup RMAN D'AIX to LINUX?
  
  Thank you

  airmax012 wrote:
  Can Hello I restore a backup RMAN D'AIX to LINUX?

  Thank you

  I give up.
  You can.

  after Oracle version to 4 decimal places

• Migrate the EMP planning 11.1.2.2 Essbase AIX for Linux

  Hello

  I have a deployed EPM Planning 11.1.2.2 environment on Windows, with the exception of Essbase, which runs on AIX.  I would like to migrate to Linux Essbase.

  Is it possible (except set up a new EPM and LCM/import environment)?  I have difficulties to find information about it.

  I hope I can do something like:

  1.) install the new Essbase server on linux and configure shared services

  (2.) the source change to point to the new essbase Server planning data

  3.) deploy application planning

  4.) import data to new Essbase

  5.) set up the old Essbase

  If anyone has the resources or advice they can direct me to, it would be very appreciated.

  Thank you!

  Keith K

  The process you described sounds very good.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• GoldenGate to migration our production on AIX for linux database

  We have a production migration soon in the coming months. We are looking for optional GoldenGate for no interruption of service.
  
  But except for an oracle Lab, I attended, I really did not have any goldengate in real databases.
  
  Can someone me links of steps how to implement? Is it possible to install this goldengate Prod database performance?
  
  All advice will be highly appreciated.
  
  Published by: user9876 on May 10, 2012 06:24

  Is it possible to install this goldengate Prod database performance?

  Yes, its possible.

  Can someone me links of steps how to implement?

  Good tutorial on Goldengate, a quick glance, you can also be implemented with the help of this.

  http://gavinsoorma.com/2010/03/Oracle-GoldenGate-tutorials-now-available/

  Thank you
  Christian Christmas Pal Singh

• Oracle cross-platform Windows to Linux migration

  Hi all!

  Have a problem to need advice.

  I have a WIndows server 2003 R2 (32-bit) with Oracle 11.2.0.1 and I migrate to Linux with Oracle 11.2.0.4

  I've been reading on and try to use on windows expdp and impdp on Linux.

  I have the sequence right to make this migration?

  Export to create 1) file form Windows (expdp) I need I create full dump?

  (2) then import them using impdp on Linux. Little bit confused becuse windows and linux by using other fails the path to data files and how Max easy to do this?

  Thank you very much!

  This happens because you have a different character in the source to the target database database.

  For example, if you export a character defined single-byte and import into the multibyte character set it is likely that you will encounter this problem because a single character who now uses a single byte in the source database can use 2 bytes (or more) in the target database.

  See: MOS DOC ID 1297961.1

• Oracle EBS Solaris to Linux migration.

  Clone the context of Applications on the target system file as follows,

  a. create a pairsfile (text file) with the following values:

  s_systemname = [SID]

  s_dbSid = [SID]

  s_jdktop = [JDK_HOME]

  s_jretop = [JDK_HOME]

  (b) generate the context of system target file:

  CD [COMMON_TOP] / clone/bin

  Migrating Perl adclonectx.pl.

  Java = [JDK_HOME].

  pairsfile = [pairsfile].

  contextfile = [context file Source Applications]

  But the context on the system file target contains an invalid as path below.

  < oa_var path = "s_tools_path" osd 'LINUX_X86-64' = >/tmp//bin:/usr/bin:/usr/sbin:/WALTON_CLONE/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:$PATH < / PATH >

  < oa_var JAVA_HOME = "s_tools_java" > /WALTON_CLONE/apps/tech_st/10.1.3/appsutil/jdk/jre < / JAVA_HOME >

  "< oa_var LD_LIBRARY_PATH = osd"s_tools_ldlib"=" LINUX_X86-64 ">/tmp / / lib32:/tmp//lib:/usr/X11R6/lib:/usr/openwin/lib:/tmp//jdk/jre/lib/i386:/tmp//jdk/jre/lib/i386/server:/tmp//jdk/jre/lib/i386/native_threads:/WALTON_CLONE/apps/apps_st/appl/sht/12.0.0/lib < / LD_LIBRARY_PATH >"

  < ORA_NLS oa_var = "s_tools_oranls" = "unix" osd >/tmp / /nls/data/9idata < / ORA_NLS >

  /tmp / / instead of /Test/apps/tech_st/10.1.3 or /Test/apps/tech_st/10.1.2

  Hi, Sumon,

  See the TechNote MOS:

  AutoConfig is a failure during migration to Linux (Doc ID 565591.1)

  Thank you

  A H E E R X

• EBS 11i of NT to Linux migration

  Hi friends,
  
  We want to migrate our EBS 11i of windows NT to IBM rs-6000 AIX 5.2.
  I found these Metalink Notes related to this activity (but under linux):
  
  Doc ID: Note: 238276.1 (Migration of level apps)
  Doc ID: Note: 230627.1 (Level Db migration)
  
  Can I use this documentation? since they are two unix flavors? Is it specific to AIX?
  This note is updated? or am I on the right track to follow this note?
  I there other (additional) procedure I need to check?
  
  
  Thank you very much

  Thank you very much my hero :)

  You are welcome.

  How can I give excellent points for you?

  If the above is useful, you can mark it as good/useful.

• Database Oracle from Windows to Linux migration

  Hey guys,.

  I'm database oracle 11g R2 in Windows 7 migration to Red hat 5 (64-bit) Linux using RMAN by transport.sql file. I installed Oracle 11 g R2 on the two system.

  But the problem is that my data files are scattered in different locations (I mean that all are not in the same directory) and I did not have enough space to all copy in the same directory. Can someone tell me how I'm supposed to write several locations as value the NAME of FILE DB CONVERT parameter when creating transport using RMAN script, I know the command for a directory only.

  RMAN > Convert the new database database linuxdb

  script of transport for "C:\test\transport.sql."

  db_file_name_convert 'C:\oracle\oradata\orcl\' "C:\test".

  the platform "Linux IA < 32 bit >";

  This command allows to convert all the files in the database that resides in the orcl directory and place them in the test directory. But in my case, all the files are not in the directory orcl

  and I can't copy other files in there because I don't have enough space on the entire system.

  I can't create transport script several times because it is incorrect.

  I appreciate your thoughts and suggestions.

  You can specify as many pairs of directories as needed

  db_file_name_convert = ('/ u01/ora/files ' ' / u02/ora/files ' ' / u01/ora/file9 ' ' / u02/ora/file9 ')

• 11.5.9 to 12.1.1 solaris linux migration and upgradation

  Hi friends,
  
  I have question about migration and high-grading the existing application and the database.
  
  our existing configuration
  SOLARIS 10
  EBS 11.5.9 ACTIVE NLS
  DB 9.2.0.8
  
  proposed configuration
  RHEL 5.5 64-bit
  EBS 12.1.1
  DB 11.2.0.2
  
  As in oracle support, they said, EBS 11.5.9 is not certified with RHEL 5.5, then we must first upgrade to 11.5.10.2.
  
  I want to know one thing
  Can I migrate EBS 11.5.9 to 11.5.10 solaris linux directly or I must first upgrade to 11.5.10.2 on solaris only then to RHEL5?
  
  11.5.9 (solaris) - > 11.5.10.2 (linux). is this possible?
  
  or 11.5.9 (solaris) - > 11.5.10.2 (solaris) - > 11.5.10.2 (linux)?
  
  Thank you

  I want to know one thing
  Can I migrate EBS 11.5.9 to 11.5.10 solaris linux directly or I must first upgrade to 11.5.10.2 on solaris only then to RHEL5?

  Upgrade to 11.5.10.2 migrate then.

  11.5.9 (solaris)-> 11.5.10.2 (linux). is this possible?

  It is not possible that you can not have 11.5.9 on OEL5/RHEL5

  or 11.5.9 (solaris)-> 11.5.10.2 (solaris)-> 11.5.10.2 (linux)?

  This is possible.

  Since you plan to upgrade to 12.1.1, why upgrade to 11.5.10.2 first (you can skip from 11.5.9 to R12). What I would say, you or the other upgrade your 11.5.9 existing instance on Solaris 10 for R12 and then migrate to Linux. Or, install RHEL 4 on the new server, migrate the 11.5.9 to the new server, and then upgrade to R12 and finally upgrade the operating system to RHEL5.

  If none of these approaches work for you, please let us know so we can provide you with all the documents (in case you need it).

  Thank you
  Hussein