AJAX WebService is sometimes called default randomly.

Similar Questions

• Calling people randomly while im my Pocket

  After the 5.1.1 update u changed something in the dialer for when you press any number or contact call immediately. Have the option to remove it please bcz sometimes when the phon is in my pocket it randomly calls people. Please solve this

  @Ahmadbiko

  There is nothing to be fixed, is just a slightly different way, the phone app works, I am personally it but I can see how it can be annoying for the others, the only way around this is to use a third party phone application.

• Satellite A100 - PSAA5U SP2022 sometimes turns off randomly

  Hello

  I have a toshiba Satellite A100-SP2022 PSAA5U-02G00G portable satellite and sometimes turns off the coast at random.
  The battery and charger are OK.

  I saw a bulletin saying a word on an update of the BIOS for A100 series for that matter.

  The problem is: I can't find my model or my BIOS to the toshiba support site.

  Thank you

  Hello

  I put t think that this could be linked to the BIOS
  In my opinion the reason for this problem could be a high temperature.

  You said that the laptop stops automatically?
  Usually, this occurs if the temperature reaches a critical threshold and the laptop stops to prevent the equipment from damage

  In most cases, the vents are clogged and air cannot circulate properly.

  Therefore, it would be desirable to check and clean the ventilation openings with a professional air spray.
  This could help them to get rid of dust and debris.

  Check it out

• How to cancel favorite strung call default behavior?

  I prefer to use ContactWidget by Mr. Ahn for contacts widgets on my home screens. I put one to "remember this setting" to the text a particular phone number. So do also set the default calling behavior, which does not want to do. I did some research online and each recommended solution does not work on our phone model. Some have suggested "clear defaults" in manage applications. This option is grayed out for all the applications that you would think that you should try. Others mention that there is a setting for each particular contact... not on our phone. The ContactWidget App behavior seems to follow the setting that is configured for a contact on the Favorites screen. If you click on a favorite that has more than one phone number, when you touch the phone icon, he invites you to select the number you want to call. At the bottom is an option, "Remember this setting." How a cancel, 'remember this setting?

  Thanks in advance for your help,

  Russ

  I fixed it by removing the contact from my exchange account and add them. I've accomplished by dragging to the desktop on my PC and drag to my contacts in Outlook so you don't lose any info. Now the favorite and contact on the home screen widget asking what number to call. I put only the default for two contacts, so it wasn't a big deal of difficulty with this method. However if more it would have put a pain.

  It is fixed, but there must be a better way!

• My iphone is 5s called people randomly while im on call and seeds much. Help!

  I just bought a brand new iphone 5 s and it glitches so im trying to scroll pages, or if I choose a certain application it will be completely random. The worst is when im on call with someone he calls someone at random on my address book. I have ios 9.2 have to I do?

  Hi Breezyboo56,

  Welcome to the communities of Apple Support!

  As I understand it, there is a problem with the touch screen of your iPhone 5s does not as intended when the scrollbar, launch apps or make calls. Try to take a glance at article below and running through the tactile General troubleshooting tips he provides.

  If the screen of your iPhone, iPad or iPod touch does not respond to the touch - Apple Support

  See you soon.

• Best way to a jQuery AJAX with JSON format called in CFM file

  Instead of using cfhttp in my CFM file, I like to use jQuery AJAX in JSON to do the query. Should I simply put the JS script on the CFM page? Or, do all the work in a .js file and call this .js file in the CFM page for display and setting in the form? Or should I just use the .js file to make JSON calls and also targeting the IDS in the CFM file for display purposes?

  Thank you.

  The standard way to include a .js file.

  HTH,

  ^_^

• Nested exception on the SOAP webservice in Orchestrator calls - org.xml.sax.SAXException: element not valid in ch.dunes.vso.webservice.WorkflowToken - businessState?

  I created a java client program to call Orchestrator webservice for the execution of a workflow.

  When executing my code, the workflow is executed in Orchestrator with new token generated workflow.

  But my client side receives SAX exception. All trace is as below:

  WARNING: Could not find the required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.

  20 sep 2013 13:02:23 org.apache.axis.client.Call invoke

  SEVERE: Exception:

  • org.xml.sax.SAXException: element not valid in ch.dunes.vso.webservice.WorkflowToken - businessState

  at org.apache.axis.encoding.ser.BeanDeserializer.onStartChild(BeanDeserializer.java:258)

  at org.apache.axis.encoding.DeserializationContext.startElement(DeserializationContext.java:1035)

  at org.apache.axis.message.SAX2EventRecorder.replay(SAX2EventRecorder.java:165)

  at org.apache.axis.message.MessageElement.publishToHandler(MessageElement.java:1141)

  at org.apache.axis.message.RPCElement.deserialize(RPCElement.java:236)

  at org.apache.axis.message.RPCElement.getParams(RPCElement.java:384)

  at org.apache.axis.client.Call.invoke(Call.java:2467)

  at org.apache.axis.client.Call.invoke(Call.java:2366)

  at org.apache.axis.client.Call.invoke(Call.java:1812)

  at ch.dunes.vso.webservice.WebserviceSoapBindingStub.executeWorkflow(WebserviceSoapBindingStub.java:744)

  at ch.dunes.vso.webservice.VSOWebControlProxy.executeWorkflow(VSOWebControlProxy.java:95)

  at com.vmware.client.LaunchWorkflow.main (unknown Source)

  ; nested exception is:

  org.xml.sax.SAXException: invalid element in ch.dunes.vso.webservice.WorkflowToken - businessState [Ljava.lang.StackTraceElement;@793d7a

  Any suggestions?

  You can check the version of the WSDL file that you use in your java application? Looks like it's outdated, perhaps to an old version 4.1

• The VC management Webservices is installed by default?

  I didn't install the VMware file - WebClient.exe that comes with installing vCenter 5.  But a service called 'VMware VirtualCenter Management Webservices' has been installed as part of installing vCenter, that starts Tomcat and listening on port 8443.  I can connect on port 8443 with a web browser and it juice shows some "garbage" characters  I guess I can just turn off the service, but I would have preferred a more clean install (IE do not install any of these components unless I specified to install the management web client).

  Yet once again, the management of Web services provide: functional areas in the vSphere Client, such as the tables of performance, State of the material, vCenter Service status.

  This article describes what happens when it does not work correctly: http://kb.vmware.com/kb/2013082

  -KjB

• Adobe LiveCycle webservice does not call webservice

  Hi all

  I use Adobe Livecycle ES2. I tried to call a Web service in my company for purposes of development. I imported the wsdl file into the layout as a new connection. I dragged and dropped the button and the fields of application for the layout. But in the preview and in the saved pdf file I am not able to invoke the Web service when I click the button. I tried the different Web services both to the wsdl file and also the location of some online Web services http. It used to work fine for me in version 8 of adobe livecycle. Now, I'm unable to call Web services at all the .the Please tell me if all the settings must be enabled in the new version so this button will call a webservice call.

  

  

  Thank you and best regards,

  JF Meyer

  Hi JF, you use Acrobat to display a preview of the form?  If you use Reader then it won't work.  I have not hurt to call webservices otherwise.  Bruce

• Call to random society claiming to be under contract with Microsoft.

  I just had a call from emergency PC that says that my computer has been severely compromised.  A technician told that they are under contract with Microsoft to call and correct critical errors.  Someone had a call like this before?  I just ran a scan and it said that there is no virus.  I stopped the call because it seemed fishy to me.

  It's a SCAM! Not to follow their instructions or advice and not to provide ANY information to them. Do not install the software on your computer and if you have done so, begin to cancel your credit cards immediately.

  Because they use the internet lines and/or phone to complete their fraud, there may be federal agencies in your country who are interested in discovering their calls. Their report directly to the appropriate agency if you feel you can contribute to their arrest and the charges.

  Microsoft do NOT pick up the phone and start dialing customers and never phones/e-mails asking for personal information or asking them to visit a web site! Please do not take into account these calls and hang up immediately.

  Avoid scams that use the Microsoft name fraudulently

  On another note, if you have problems with your computer, please do not hesitate to post a description of the situation and the error messages you received in those forums. We would be happy to help you. (information staff unnecessary or requested !)

• Synchronous asynchronous Webservice Web service call error

  Hello. I have the following scenario.

  I created an asynchronous Web Service (WS_1) to SOA that takes a string as input and waits 10 seconds then returns a reminder. I call this Web Service asynchronous to another web service (WS_2) (that I also created in SOA). In the BPEL I use "invoke activity" to call the Web Service asynchronously and below, I use "activity to receive" a reminder of the Service.When Web I test this Web (WS_2) Service in WeblogicEM, I'm not getting any reminder of asynchronous Web Service (WS_1). On the trail of the flow, 'receive activity' is highlighted and said "Receive1 (in progress)".

  -Does anyone know what is happening here?

  -Thank you

  It is not a good practice to call services async to sync processes.

  For your scenario, have the property of the value requiresNew transaction. This property is listed under your synchronization bpel component in composite.xml

• Satellite Pro C850 - WLAN call default after installing Win 7

  Hello

  I own a C850-1 gr (PSCBXE), which comes with Win8.
  I bought Win 7 32 bit Home Premium and reinstalled from scratch.
  Later I installed the drivers from toshiba support page in the following order:

  Chipset SW installation utility
  Intel Management Engine Interface
  Display driver
  Intel Rapid Storage Technology driver
  Realtek Audio Driver
  ATI HDMI Audio Driver
  HD SRS Premium Sound Technology
  Synaptics Touch Pad Driver
  Realtek LAN Driver
  Realtek driver LAN wireless
  Intel Wireless Display
  Filter driver package Realtek Bluetooth
  Bluetooth monitor
  Intel USB3.0 driver
  Realtek card reader
  TOSHIBA Value Added Package
  Sleep TOSHIBA utility
  TOSHIBA resolution + plug-in for Windows Media Player
  TOSHIBA Media Controller
  TOSHIBA Media Controller plugin
  TOSHIBA Network Device ID registry tool
  TOSHIBA Web Camera Application
  PatchFiles PCIIDEREG - 1.2
  PatchFiles

  When installation is complete, WLAN fails after reboot, alternating.
  This means:

  * First boot: WIFI OK *.
  * Second startup: WLAN failed *.
  * Third start-up (= first boot): WIFI OK *.
  * Fourth Starter (= second boot): WLAN failed *.
  *...*
  * and Yes guess

  Lack of resources, the WLAN icon is displayed for a few seconds, then "no network" icon.

  Any help is greatly appreciated.

  Hello

  Your order of installation of drivers contains the Intel WLan driver.
  But the laptop Satellite Pro C850-1 GR was equipped with the Realtek RTL8723AE WLan/BT combo card.

  I think that you need to uninstall the Realtek WLan driver and WLan Intel driver.
  In addition, you must pay attention to the functionality of BT.

  The card is compatible with the BT and you need to install the driver Package Realtek Bluetooth filter before installing the battery Toshiba BT.

  In addition, do not forget that this WLan adapter is enabled by using the FN + F12 (or just the F12)

  Finally and above all do not forget WHAT BIOS the dafault value

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WebService WCF call jQuery ajax

  Using jquery ajax I try to call the WCF Web service and I get the answer in IE but not in FF and Chrome.

  At the end of the service account that we have configured peace belov of the code

  The WCF Service Web.config

  
   
   
   
   
   
   
   
  

  My client Code:

  
      
        
        
         
  
  
     

  
  Calling Web Services with jQuery/AJAX
     

  
     
     
  
  
  

  I think I have it hunted. Given your current code, you specify:

  contentType: "application/json, charset = utf - 8"

   

  
  When the network is requested, we can see the following in Chrome Web Inspector (only including major lines):

  Request URL:http://sampleservice.azurewebsites.net/Service1.svc/GetData
  Request Method:OPTIONS
  Status Code:405 Method Not Allowed
  
  Request Headers
  Access-Control-Request-Method:GET
  
  Response Headers
  Access-Control-Allow-Methods:GET, POST
  Allow:GET
  

  So even though we are specifying a GET in the AJAX request, the request method (for some reason I'm not sure) is failing to OPTIONS, which is not a method allowed by the side server. Based on this KB here this seems to be related to MIME types:

  http://support.Microsoft.com/kb/216493

  So, I advanced and ran a test to make a change to contentType as follows:

  contentType: "text/plain charset = utf-8"

  With that, I saw the success of Chrome, and as in comparison to the network demand, we can see:

  Request URL:http://sampleservice.azurewebsites.net/Service1.svc/GetData
  Request Method:GET
  Status Code:200 OK
  
  Request Headers
  Accept:application/json, text/javascript, */*; q=0.01
  
  Response Headers
  Access-Control-Allow-Methods:GET, POST
  

  This time:

  • Access-Control - request method was not present in the request headers.
  • Allow: GET was not present in the response headers.

  However, our method of application is duly appearing as GET.

  What I think that it comes, it's a configuration server as to how certain MIME types are treated; However, I don't have the expertise to guide you on the application/json MIME type configuration to achieve the same success.

  That being said, with the type MIME text/plain , the success has been called and console.log (result) gave:

  MMAD APPS India Pvt. Ltd.
  

  For reference, my final index.html is as follows.

  
  
      
          
      
      
          
  Calling Web Services with jQuery/AJAX
          
  
          
          
      
  
  

  Would you be able to it give it a try in your browser and confirm the output of each Web Inspector tool?

• BlackBerry Smartphones phone call random contacts

  My phone sometimes called random numbers in my contacts list.  Phone is turned on but not keys, phone calls just a number... Usually, it's my dad and MOM... come on has understand... but is that sometimes when I go in and out of coverage areas, my phone will just my number of parents.  I know that I have great parents... even my phone love em.  This happen to anyone else?

  Welcme to Frums

  If I keep my phone in my front pocket (I wear rub) my phone call my son. I'll suddenly hear "Hello, help, I'm in your pocket, let me out."  And I look, and of course, I called my eldest son!  My keys are apparently sensitive, so I try to remember to press the button on the top that will put the phone in sleep mode. By allowing for the call and coming messages but prevents me to call my son in my Pocket!