Alarm definition icon question

Similar Questions

• icon question mark which shows on the screen of the HP 8620

  Today, I see the icon question mark (help?) lights up on the front of my new all-in-one screen.

  First time for this weeks since the first installation and implementation.

  I'm not having any problems with the device.

  What can he say?

  Thank you

  Hey @dennistaphorn ,

  Welcome to the HP Forums!

  I understand that you have questions about the? icon on the front panel of your printer.

  The? appears on the left side of the control panel when you are on the home screen of the printer. It allows to access the Help menu that give information about the printer you and useful guides related to the printer. This button is normal and does not indicate an error on the printer.

  Hope this information helps.

• Desktop icon question - great, WLAN icon on the desktop

  original title: the desktop icon question

  Last night my laptop automatically downloaded updates for Microsoft Windows 7. This morning he said updates installed and starts normally. However, I now have an 'icon' large, transparent, non-interactive in the form a tower with the title "WLAN" stuck to a place on the left side of my desk. I didn't notice at first but after my internet started, realized quickly that it was there. This "icon" does not disappear any application, I opened. After searching the Web for what it might be, I scanned my computer with an analysis of the software and programs malware/dracovenii (suggestion) I am free with happiness at the same time my antivirus favorite. I checked to see if it was a widget/gadget and it isn't. I continued to control internet, microsoft.com, and asus technical forums to see no answers to my dilemma. If anyone has an idea of what it is and whether it can be removed, I would be grateful for the help.

  After some research, I went to my control panel > programs > seen the installed updates and check my recent updates, since I am very sure that they were the cause of my problem.

  After looking for Microsoft. com with codes of 3 security update that has been installed recently, I came to the conclusion that the update of KB2552343 was the update that has the problem of the "ghost WLAN icon.

  So I uninstalled this update, and I turned off my automatic installation of the feature updates in my windows update program. I now put to download updates and install them manually.

  I hope that everything that has the problem in the first place is fixed with a future update, because I prefer to have all updates automatically downloaded and installed security. More information on my computer that is its a K61 series laptop Asus K61IC.

  Thanks again for all your time and I am very happy that I could solve this problem myself and others provide assistance to its subject.

• Stuck pre alarm Notification icon

  I set a daily alarm and rejected it as I would when I wake; However, the Bell on the bottom right icon will not disappear.  I clicked it and it warns me of the alarm that I rejected.  I even went in the application of clocks and turned off all the alarms.  It's annoying because I don't want to continue to see an alarm notification telling me to wake up!  Thank God he is not really alarming all the time!  Please help this notification with compensation.

  Can you tap the icon, and then tap - drag the notification to the left and outside?

  Message edited by DrSuSE on 09/06/2009 12:02

• 10.2.3 FCPX film canister icon question?

  I'm working on FCPX 10.2.3 and my project schedule does not appear the film canister icon to switch between the projects as it shows in the video tutorials. How it to appear?

  Hey Darren,.

  To go back in your open project timelines, click the left arrow (and vice versa).

  

  Russ

• ICON Question Help!

  Hello! I'm serious need help to understand what it is. An icon suddenly showed today that I turned on my computer. I was about to open a Photoshop file and I saw in my pictures folder, all the files I got this icon above them.

  

  I can't find any info on what it is exactly. The files would be open and act normal and all, but just curious what happened or what it means, if someone knows? After that I open a folder and noticed that it has always worked well, my whole desktop computer started showing this icon on every file I have. To be clear, that it shows that on the files (pictures/videos/documents) no program shortcuts or folders more. I also have an external drive that I store all my extra files and these files do NOT have this icon on them.  If anyone can help it's much appreciated!

  You will find Norton on your Start menu.

  Look in the help within Norton to give you a good explanation of the meaning of these icons.

  Norton settings contains a section on these icons, so you can disable them here [they refer to them as Backup state overlays].  However, if you have configured Norton to be your backup utility then you might be better to let the icons to display.  It is up to you.

• The desktop icon question

  Good afternoon

  Somehow, I don't know how, but all desktop icons have been modified in Adobe PDF format, when I click on it I get the following message: cold Adobe Reader not open 'iexplore.exe' because it is not a supported file type or because the file has been damaged (for example, if sent as an attachment to e-mail and has not been correctly decoded).

  Either way is correct without reloading Windows 7?

  Any help would be appreciated,

  rcbinnorva

  E-mail address is removed from the privacy *.

  Hello

  This should help you.

  'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

  "When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

  Run the Mr.Fixit here or you can use the manual method it y to correct yourself

  http://support.Microsoft.com/kb/950505/en-us

  And also, read information please.

  'Change the programs that Windows uses by default'

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  See you soon.

• BlackBerry Curve 8310 email smartphone icon question

  The e-mail icon will not disappear on the screen.  It shows that I have a single message.  Well, I went and deleted all of the messages on my phone, but it still appears.  Next to the messages on the screen it says (1 unread).  Anyone have any ideas.

  Tips to clear the message unread... try them in the order.

  If you have a new icon rogue Message on your home screen, or a negative number (-1), one of these solutions could erase or reset:

  Try these options:
  * Hard Reset BlackBerry by holding ALT CAP (right Shift key) and DEL (or removing and reinserting the battery)
  Messages > saved Messages
  Messages > view folders, check each folder (calls, SMS and MMS, and boxes, saved missed boxes, browser, phone logs etc.)
  * Scroll at the top of the folder, on the title menu, click or tap to MARK PRIOR OPEN date
  Change your theme and see if it persists and return to your desired theme. (Options > theme > select.)
  * Clean and reload your OS.

  Good luck.

• BlackBerry Smartphones ICON question

  I just noticed a new icon on my BOLD 9650, it looks like a circle with a cross through it and 3 curved lines to the right. This ICON appears in the upper right of the screen, just below the "3 G" ICON. Since I noticed this ICON, it seems that my battery goes down much faster than normal.

  Thank you

  Thanks, I'll check out them

• BlackBerry Smartphones alarm icon disappeared

  I went to move my alarm/app icon and it disappeared from my home screen. It is not hidden, just disappeared.

  Help

  I have to wake up on the road!

  Welcome to the forums

  From the home screen, go to the screen of the application and check to see if the icon is hidden by pressing menu > show all. Also check your application screen records in case you accidentally swipes in one of them (for example, documents to go file).

• Automate the definition of alarm - triggers

  I want to update an alarm definition - Triggers - Trigger Type condition values using powercli. Is this possible with powercli?

  OK, this one is a bit special because there is no Action defined.

  But with the API, it is possible that

  $alarmName = 'use of the Datastore disk.

  $yellowPercent = 85

  $redPercent = 90

  $alarmMgr = get-view AlarmManager

  $alarm = get-view-id ($alarmMgr.GetAlarm ($null)). where {$_.Info.Name - eq $alarmName}

  $spec = $alarm. Info

  $spec. Expression.Expression [0]. Yellow = $yellowPercent * 100

  $spec. Expression.Expression [0]. Red = $redPercent * 100

  $alarm. ReconfigureAlarm ($spec)

• How to restore the default definitions alarm?

  How to restore the default alarm definitions in Vcenter 4.1.0?

  Thank you

  tjcooper

  Your solution is here:

  http://KB.VMware.com/kb/1010399

  Troy is correct. I went through this problem myself.

  Best regards

  TrooperX

• Configure the question vSphere "alarms".

  Hello

  We have set up our environment vSphere and yesterday I have configured the alarms with email alerts. However I'm not sure its something wrong with our vSphere installation or configuration of alerts.

  I get this alert:

  Alarm definition: * (expression alarm event: isolated HA host OR an expression of alarm event: HA all guests isolated OR expression alarm event: HA host has no) < / stro < br / >event Details: *the possible host failure has been detected by HA on hostname.domain.com cluster OurCoClusterName

  In our vSphere, networking, with that we have 2 guests and I Console of Service installation for "pulse" with 2NICs assets and intelligence that is using the heart rate, I believe.

  Anyone can give any suggestions on what the cause.

  Soon thanks for help

  It's weird. What happens if "reconfigure you for HA" for each host?

  Duncan

  VMware communities user moderator | VCP | VCDX

  -

• iOS 10 - alarm has stopped working

  I upgraded my iPhone 6 to iOS 10.0.1 and since the update, when I woke up no longer works. Can I set an alarm, the alarm clock icon appears in the upper display HR, but when it's time to get attention, nothing happens.  The phone does not light, it does not all sounds.  I tried everything I could think and suggestions online, but no luck.

  Another weird behavior is that, even after an alarm has passed (without any reaction in the phone) icon in the upper part remains HR.  I can remove all the alarms, the alarm icon is still present on the screen.

  I tried the new feature of sleep thinking that it my by a part of the problem, but it does not work.  However, it doesn't have an impact; If I activate the function of the hour of sunset, the icon of awakening on the upper screen HR will disappear and any alarm (on the alarm screen) which was armed gets off.  It is as if the two are mutually exclusive, which means that you can use sunset or traditional alarms, but not both.  Anyone know if this is the case?

  I really doubt I'll use the function of the hour of sunset, it's a little strange and not terribly useful for a busy life that is not too predictable to go to bed each night.  However, the loss of the traditional wake total feature is a huge disappointment.

  I tried to restart the phone; the only thing that does is make the alarm clock icon to disappear (if he was stuck from a prior alarm). It does not restore the real vibration / sound set alarm function.

  I also deleted my way of thinking iHome alarm clock app that alarms this app can somehow compete with the alarm feature native iOS, even if they have all two has worked well in the iOS 9.

  Have you deleted all your alarms and added them?

• When I refresh my desktop or restart my computer, all the icons on my desktop are moving to the left.

  The desktop icon question

  When I refresh my desktop or restart my computer, all the icons on my desktop are moving to the left.  I drag them back where I want to, and the next time that I reboot, they are to the left.  Running MS XP on this computer.

  How can I fix them in place?

  Hello
   
  I suggest you to change the Auto settings fix the registry.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
   
  322756 how to back up and restore the registry in Windows
   
  a. click on Start and then run.
   
  b. type regedit and press to enter.
   
  c. navigate to the following key.
   
  HKEY_USERS\. DEFAULT\Software\Microsoft\Windows NT\CurrentVersion\Program Manager\Settings
   
  d. change the REG_DWORD value 0.