Alienware 15 battery permanent fails and must be replaced.

Similar Questions

• I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

  I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

  It is not usually necessary to create an exception for the certificates.
  
  Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.

• Hard drive failure is imminent and must be replaced

  HP TouchSmart 610-1020 has

  i5 6 GB RAM 64 bit

  Windows 7 Home Edition Premium--> Windows 8

  Hi there, since a terrible week for me I started to receive the error message:

  Hard drive failure is imminent and must be replaced

  only when am re - / from my PC.

  I made a backup already a few days ago (space available was already 85% - did not much), run all those disk cleanup, defragmentation, analyze and verify programs and there was nothing wrong. I ran all possible controls and it had nothing recorded. I've updated / installed Windows 8 which works perfectly without any problems, no computer crash or that it is, but only sometimes receive a message saying that I need to run/shedule a back, etc.

  As I already mentioned, there was no disk error, no other problems known but still get the message "hard drive failure is imminent and should be replaced" and crazy!

  My questions are:

  (1) what on Earth is happening, there is always a problem with touch smart PC; should he stay away all in a desktop PC and just buy older versions - separate screen and tour, etc.?

  (2) I have no problem and continue to use my PC but wonder what will happen; It will be down, it's just a false error message, what should I do?

  (3) if I have to take it to a service, what should I take care of?

  Thank you for taking your time and wil appreciate for your posts about.

  Alp

  Hello

  What has happened is that the CHIP system reports told you that your hard drive will fail little time. It is good that you have saved.  The fault lies not in all of your PC, but in a single component, namely the hard disk. You own your PC like one year standard warranty is longer.

  You need to buy a hard drive with the following specifications. It of time to find your recovery disc as you need to recover your PC in its delivered State and then apply the upgrade 8 to win again. You can install it yourself or have done by a qualified PC store or from an HP Service Technician. The HP service center is the most expensive option.

  You can avoid having to use the recovery disk and upgrade by a clone of your hard drive on a 1.5 TB external drive. You will be able to migrate the clone on the new diskette with a product commercially available as Paragon Hard Disk Manager 12.

  • Size: 1.5 to

• 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. Is this easier to do than to to replace a HDD with a SSD? I hope I can do it myself.

  My 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. The SSD originally came with the computer and not a subsequent update. I understand that a SSD replacing a HARD drive is quite complex, but would be more simple replacement of a dead with a new SSD SSD? I hope I could make myself.

  Even as the replacement of a HARD drive. However, go to OWC buy the connector of the special drive that has the necessary temperature control that is not part of the SSD, because it is for the stock of HARD drive.

• Crashed hard drive and must be replaced

  I have a Compaq Presario CQ60-204NR, which is not quite 2 years old. The hard drive broke down. I would first like to know if you can tell me if this laptop is 32-bit or 64-bit, and which drive hard ability then I replace the damaged with? I don't know what is needed to replace the hard drive. This laptop came with Windows Vista Home Basic Service Pack 1. Thank you. Linda

  Normally, I would ask you if you are running 32 or 64 bit, but according to your specifications you are running 2 GB of RAM, which would indicate that it is 32-bit. It takes at least 3 GB of RAM to run 64-bit.

  You can use almost all SATA 2.5-inch drive in it. The largest capacity as 1 terabyte or more are too thick and doesn't work.

  I'd go for at least 500 GB drive at 7200 RPM / min. Seagate is a nice hybrid drive that is fast enough and is still affordable.

  http://www.Seagate.com/www/en-us/products/laptops/laptop-HDD/

  Install the new drive and use your HP recovery DVD to reinstall your operating system.

  Do you know how to replace a hard drive?

• XP Pro gives me error message < root windows > \system32\ntoskrnl.exe is damaged and must be replaced. How to replace or fix this problem?

  I tried to reinstall XP Pro, but then I get another error message the file for web printer windows cannot find so it won't let me not finished reinstalling XP.  How can I solve this problem or solve the problem with the ntoskrnl.exe that need to be replaced?

  Susan77,
  Try the items listed in this article: http://support.microsoft.com/kb/314477 
  It covers the error you see and can be useful. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

• Laptop 15-R205TU: broken hinges and must be replaced

  Hello

  I bought this laptop only 4 months ago and its left hinges broke because he has not escaped or hit anywhere. I called the customer service and told them that when I opened the lid on normal use it is broken, which is quite shocking to me. They said they will send to the engineer to fix the problem and next day engineer came. He concluded that it is the first case to him that without shots or hinges broke. And HP are covered in warranty and you have to pay for it if you want to resolve. Yet once again, I called the customer service and said of the case, then the customer to transfer the call to the elderly person to solve the problem. After experiencing my problem the old person refused to fix my problem in warranty and asked me to pay for it.

  After thinking too much I decided to reimburse the costs that I am unable to do my job. Next day, I asked them to send the quote after a few hours later I got the quote and surprised. They are charging me Rs 20 000 which includes raw view, back cover and bezel WBC.

  Please help me on this.

  @ranjit2

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.

  Thank you for visiting the Forum from HP Support.

• My officejet pro L7680 says my NEW black ink cartridge is empty and must be replaced.

  Shake the cartridge and put back, but the printer still says: I'm running out of ink. It is a nearly full cartridge, not that I'm trying to get the last dredges of ink to.     C8189A

  Help

  Hi hope you are doing well and I'm sorry to hear that you are

  Reset printer reset;

  Follow these steps to perform a reset of the product.

• Power failed and now iMac trying to reboot several times

  Continuous power failed and computer try to restart Gets the part of the journey through the bar on the screen, then restarts.

  -iMac 27 "equipped with the latest system and all software are uptodate.

  -All the devices are disconnected.

  -Tried to hold down option, also I tried shift key and no change in the attempts to restart.

  -Unplug the power cord for a few minutes, but no help.

  Any other suggestions?

  Try to do a reset of the PRAM, if this does not work try starting on the (command-R) recovery Partition at startup and run disk utility - repair disk. If errors appear on your hard drive is damaged and must be replaced.

  Resets of LANDAU and SMC Intel iMac

• PERC H700 RAID 5, 3 disks, 1 Reporting failed and 1 predictive failure

  Hello:

  I have a PowerEdge T410 with a PERC H700, RAID 5 with 3 disks.  The controller reported a failed drive so I replaced the week last with a drive of new/refurbished.  Now only 1 week later it reported another drive has failed and the drive replaced as predictive failure.  Looks suspicious, i.e. I am doubting the controller card.

  I think updating the firmware of the controller first, but not sure if I should replace the faulty drive first, i.e. If updating the firmware could cause table failure.

  Also, if I install OpenManage on a virtual machine (host is ESXi 4.1), OM sees the controller?

  Thank you!

  Start on our live image and export logs of the OMSA facility there. http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=CWF92&FILEID=3550743303&osCode=WS8R2&ProductCode=PowerEdge-T410&LanguageCode=en&CategoryID=di

• Alienware M17X battery knows a permanent failure

  September 30, 2016.

  I am the owner of an Alienware M17X R3 model I purchased in November of 2015.

  I had noticed that my machine seems to experience performance several questions when the battery shows it was plugged in, but do not load. Naturally, when the computer is disconnected and reconnected to power, this issue seems to be fixed. However, I remember that on September 9, I had unplugged the power, and my computer had armored black before my eyes.

  As I began once more my computer, I received the message that my battery has known a permanent failure and had to be replaced. In the hope of a solution, I began to ask one of my colleagues on my problem, their response was that my battery was included and was therefore irreplaceable. However, I had contacted an expert who offered their services to install the battery they need the correct model.

  I started looking for some common types of battery online, but none of them have good customer customer, some stating that the battery didn't fit with their computer, or declared not satisfactory on condition of their model. I decided to reject buying stacks of marketing unreliable or non-official.

  My question is where to find the correct battery type who fixed my computer and how? I prowled around which I guess is the stock of Dell, but I can't find the battery I want.

  I'm still currently a college student, and I can't be away from my computer for more than seven days. This should explain why I can't send my machine to the manufacturer for repair.

  My family and I are traveling in cross-country skiing for the wedding of my sister in November, so I'll need a working computer at work of our arrival. Is there a possible solution to this?

  Wait patiently for a response. Thank you very much for your time!

  The 2015 Alienware 17 - R3 comes with one of these two batteries =
  YKWXX (8 c, Lithium, 92WHR, Sanyo)
  5046J (8 c, Lithium, 92WHR, Simplo)

  Call 1-800-357-3355 Dell spare parts and ask for prices and availability of the Dell reference.

• Alienware 17 battery failure

  I own a laptop Alienware 17.  By turning on my computer, I get an error code indicating the battery failure permanent.  This happened a year ago and the battery was under warranty so it was replaced.

  The woman to technical support, I spoke today, said that the battery should only last a year previously, it must be replaced. She continued by saying that there are no batteries for this calculation in stock.  Is this true?  The batteries should only last a year?

  The computer has two years and its second battery just died.

  No need to disconnect the battery.

  In fact, Dell provides a tool to extend the battery life, but it is disabled by default (at least, it was on my 17R3).

  Right click on the battery icon, select "desktop mode battery charge" and go from there.

• Alienware M17X battery issue

  Hi, I bought an Alienware Laptop M17X 3 years and I've charged the battery 3 times and have used this laptop for 5 hours at most because I have other computers in use and it is in my closet for the past two years. When I plugged the battery defiler shows an X red and says that the battery is not detected, so I've updated the Bios and all the materials and programs and everything is updated and then I tried the FN/F2 and nothing happens and I tried to unplug and take out the battery and hold the power button for 1 minute until 4 minutes and still nothing I read an article that the battery may be completely dead and must be 'preloaded' and I don't know how to do or that I need to do to fix my problem of battery and I tried all the troubleshooting and nothing works. If anyone can help please do so and thank you inadvance

  Hiya, you may need to perform a complete emptying of power to reset everything.

  1 turn off the power

  2 disconnect the battery

  3. turn the laptop and sit on a towel for the rear cover is exposed

  4. remove the two screws that fix the rear cover in position

  5. remove the rear cover

  6. next to the Center CPU fan you will find a call stack small coin with a wire to a connection on the motherboard, unplug wire to this.

  7. turn laptop computer sense, press on and hold POWER SWITCH for a slow count to 20

  8. let all disconnected for 10-15 minutes (to be sure, to be sure)

  9. reconnect all in reverse order.

  10 insert adapter Plug and let it charge for a few minutes before starting the system.

  This may not work in this case, but it has worked well for me in the past

• Hard drive failed and I lost my product key?

  Hi guys,.
  
  So my friends hard drive failed and unfortunetly he lost everything.
  
  I replaced the broken hard drive for him and reinstalled Windows 10. However when I went to check if the OS has been activated, it showed as not been activated? I thought the machines after that Windows 8 had their licance saved in the BIOS, so we do not have this problem?
  
  Also there is no sticker on the back or under the battery that contains the product key for Windows.
  
  I also talked to Microsoft, but they were uable to help.
  
  Any help is appreciated!
  
  Thank you.

  KiddG wrote:
  

  It's a HP Pavilion 15-p264na. It came with Windows preinstalled as an OEM licance Home 8.1. It was then upgraded to Windows 10 at a later date using the free update successfully.

  Then the second option mentioned above. Didn't it actually triggered successfully after 10 win upgraded?

  If so, you should be able to activate just fine without problems, IF you use the same edition of Windows. You write it housed 8.1 - you now install Win 10 Home? You mentioned 10 Pro down...

  So I guess I'll with your third option and using the recovery media?
  
  I have 2 HP drives here for Windows 10 Pro for two different HP devices. I think these are the recovery CD, it says that they cotain the client software, if that is correct? Can I use these discs Pro on a BONE at home? Or that I'd be better by following the links you provided?

  Laughing out loud. I'm sorry. I am afraid that you cannot mix just DVD / CD / etc - they are for a specific model for the specific version of Win / edition. You cannot use a recovery media for HP computer to another - it will simply not work 99% of the time. You cannot mix editions of Windows (the House is for Home, Pro goes to Pro).  You want the recovery media for this unit, you need to follow the links.

  However, IF you have enabled the upgrade of Windows 10 post fine, you can simply download Win 10 ISO from here:

  > > https://www.microsoft.com/en-us/software-download/windows10/

  Download the tool, it will download an ISO and burn it to a DVD or write on a USB key. Follow the on-screen instructions, skip entered the key and move on. After installation, Windows 10 HOME should activate fine using digital entitlement if 8.1 Home Win allowed initially.

  I would like to know how this goes for you.

• Upgrade to 3.0.19, failed and delete the .exe. Downloaded 3.6.3, can I ask on an old, keep old profiles?

  I have received messages that my version was not taken in charge, to upgrade to 3.0.19. The upgrade has failed and the old Firefox.exe deleteda; now no browser. I downloaded the 3.6.3, can I install on the old version, corrupted and use my old profiles?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0 .NET CLR 1.1.4322 .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  Yes, just install it. He must find and use your current profile.