My officejet pro L7680 says my NEW black ink cartridge is empty and must be replaced.

Similar Questions

• HP Officejet Pro 8500 has problem with black ink printing

  I have an Officejet Pro 8500 a printer. When I print documents, it will not print anything in black ink. The colors work very well, but just black will not print. The printer says that the black ink cartridge has plenty of ink, and when I shake it, I can say that there is something in there. So, I don't think it's a question of black ink out. Is there a chance that something is blocking the ink out? Any patches for this in addition to the purchase of a new ink cartridge?

  Document here can help solve the black is not printing on your HP Officejet Pro 8500 has.

• I put a new black ink cartridge and it says protected HP and won't do anything

  How can I get this new black ink cartridge to work my 5514 photosmart hp printer. It's a HP cartridge but it says HP protcted. I bought it at Staples.

  I'm guessing it's a recharged HP cartridge? I take it back to Staples and ask another. If possible, a genuine new HP cartridge

• After the installation of the new black ink cartridge, my pictures are distorted

  After installing a new black ink cartridge, my pictures are distorted

  Hello

  I suggest you to contact HP for further assistance regarding this issue.
  http://WWW8.HP.com/us/en/support-drivers.html

• New 564 black ink cartridge printing gray and Spotty - as if almost out of ink

  I have a PhotoSmart all-in - One C309A

  I have Windows 7 64 bit

  It's a wireless connection

  I replaced the black ink cartridge 564 today and it does not work

  I don't get the error messages

  Can I change the font of document to another color (red for example) and it prints well

  If I try to print in black, the letters are gray and spotted - as if I was almost out of ink.

  The ink level indicates the black cartridge is full.

  Thank you-

  I suggest you start the troubleshooting steps described in this document.  If this does not resolve the issue post here can help.

• Re: HP Officejet Pro 8500 problem has with black ink printing

  I have an Officejet Pro 8500 a. I've done a clean print head.  I have a lot of HP black ink cartridges.  Print head State says black is good.  I get hardly any black printing.  All the colors are fine.  Help!

  Hi @di43

  I appreciate the troubleshooting you have already completed to solve the problem. I understand that the black ink not print as expected. Even if you already have some of the steps in the following document, I suggest you fill all the solutions advocated in the order they are presented, even if it means something you already tried; Printer prints a blank Page is not printing black or color of ink for the printer series e-all-in-one-HP Officejet Pro 8500.

  I hope this helps.

• HP Officejet 4500 - new black ink cartridge will not print

  I just replaced a depleted with a new cartridge, HP 901 black ink cartridge and the black has completely ceased to print.  I installed a new color cartridge and it seems ok.  I cleaned the printheads several times to nothing does not.  Can someone help me?  My OS is Windows 7.

  Well, I don't know why, but the printer started working normally again.  I had turned if off for about one day and decided to try one last time before junking it and don't be, you know, it worked!  After turning on the printer, I printed a 'State' of the control panel of the printer page and - no problem.  Then I tried to print documents from my laptop and still - no problem.  I guess only time will tell if the problem is actually solved, so I'm keeping my fingers crossed.  Lisa, I hope that the demon decides to leave your printer as well.  Good luck!

• Photosmart 6520 does not print the new black ink cartridge

  My new black ink no longer works on the printer.  This seems to be a problem throughout all of the printers HP no matter what model.  Did someone with similar problems had success getting their black to print despite all recommendations of manufacturing without success?  I have my printer just over a year.  I think it's ridiculous that a product falls down that quickly for money which is devoted to this topic.  I called HP for technical support and after doing all the things, he recommended that he told me that my printer is broken... is no longer under warranty... but he will sell me gladly one handed to nine for more than the cost I would pay if I bought it new from Amazon.  I trust is no longer the product... Why would I want one handed to nine?  Just looking for more tips out there who may have worked for others, before going out and buying an Epson.

  Had same problem, went out and bought new cartridges ink and all but worked black, what to do, throw it in the trash? or have a go at fixing, because I had just spent more than $90 on new cartridges, I thought I'd be there is attachment.

  To cut a long story short, that I managed to detach, scratching the dining room in the process, wife not impressed! puledl the ink outside, white liquor dispenser put spray gave him a good squirt, put back together, it now works like a new! Yay! Geez I'm so smart.

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

• DeskJet 5550 does not print after I installed new black ink cartridge.

  I recently got a new Dell with Windows Vista 64 - bit OS.  Printer was working fine until I replaced the black ink cartridge.  Print the control page as usual after you install the cartridge, it will not print anything else now.  Not even a test page.  I tried taking the cartridge out and put it back in.  Tried to pull the plug on the back of the printer and plug it back.  Tried turning the printer off and on again.  Also tried to restart the computer.  I downloaded the HP Print Diagnostic report and could not find any problems.  Could there be a problem with the ink cartridge itself?

  Well first of all, I went and bought a different black ink cartridge to remove the cartridge in the problem.  This was not it.  Then I unplugged the printer and cleaned thoroughly and connected plug.  Still did not work.  Then I went into the properties on my printer and started to play with the settings.  FINALLY I FIXED IT!  I clicked on the tab advanced and then click Print Processor.  I then changed to WinPrint and retried the Test Page printing under the general tab and it worked!  Woo Hoo!

• HP Photosmart Premium Fax all-in-One Printer-C309a-new black ink cartridge will not print

  I just installed a new black cartridge (made by HP) what print quality became poor in the middle of a job.  He completed the job just fine, but when I tried to print later, the parts of the document that are in color/black and white will be printed.  Black is simply absent from the document.  the level of supply shows as thin and all the diagnostics indicate that there is no probem.  I have not received the error messages.  I tried to turn the printer power switch.  I tried to clean the print heads.  I tried to uninstall & reinstall the cartridge.  I do not have the black cartridges extra to try to see if that does not solve the problem, but as stated above, it worked at first.  I have just printed on ordinary regular white printer paper.  I tried all the relevant measures in the troubleshooting document of poor mailed print quality HP elsewhere on this page.  nothing worked!  another post mentioned someone resetting the printer, but did not say how it was done.  any ideas on a solution? Thank you!

  To reset the printer, follow these steps:

  While the unit is turned on, remove the power cord at the back of the printer. Wait at least 30 seconds, then plug the power cord to the back of the printer, then turn on the device. That will complement a power reset.

  Now, lack of black printing can be the result of a number of things. If it's only missing say when printing from Word, then print settings in Word are set to grayscale only (or something similar) which would exclude the black cartridge. If all programs, so it's either the main print in grayscale settings only the value or the cartridge/print head is blocked to the top/Sales. If this isn't the print settings, then create a report of print quality and follow the steps described in this document:

  http://support.HP.com/us-en/document/c01624986

• Photosmart 5514: Photosmart 5514 - new black ink cartridge will not print

  I just replaced all 4 ink cartridges (new cartridges of HP).  Each color prints fine except the black.  Not a spot of ink is crossing.  I removed, checked and reinsert the cartridge several times.  I check the contacts, clean them by following the instructions in the troubleshooting guide.  I've run the cleanup tool and quality report several times each.  Still nothing.  The printer is only a couple of years, out of warranty, but I don't have any problems with it so far.  Is there anything else I can try before I have to throw this printer?

  For anyone who is having the same problem: I continued to try to understand this problem because I didn't have to buy a new printer.  I finally found a solution after trying everything that previously mentioned.  HP never really gave me any solution.

  On the touch screen of the printer, go to Setup, then Preferences.  Do scroll to the chip in cartridge information and change it to Off.  Now my black ink prints!

  I don't know if it will work on other printer models, but it worked on mine.

• Photosmart B010 black ink cartridge not working not not after replacing

  I print color but not black after the replacement of the cartridge. What can I do?

  Hi glennbelgium,

  I have linked a document with good to take troubleshooting steps.  Click here  The name of this document is not exactly on the point, but the steps are on point.  I could start by checking that you do not have low ink cartridges and replace those who are weak.  When you get to the step to clean the printhead , I'd do this process 2 or 3 times if necessary.

  Let me know how it goes.

  Good luck!

• My MX870 prints, because the large black ink cartridge is empty but the little black is full

  How can I get the printer to print using available in the smallest cartridge black ink when the cartridge is empty?

  Hi sbparks12,

  Highlighting the text in your document and change while another color other than black will use the smallest black ink tank and other reservoirs of color ink in the printer to print the text on the page.  In addition, if you receive warnings of low ink in the printer, you can disable the printer ink level detection function, so you can continue printing until you are able to replace the ink tank which is empty.  To do this, press on and press and hold STOP/RESET or RESUME/CANCEL button on the printer for at least 7 seconds, then release.  Once the ink tank is replaced with a genuine Canon ink tank, printer ink level detection function is reactivated.

  I hope this helps!

• HP Officejet Pro 8500 A910: Print in black ink only

  I'm running out of color ink, but printer will not let me just print in black. I can't afford to replace the colors, but the black cartridge is full.  I can't write much more, so I use it to print my letters to my 84 year old mother.  She can't read my writing, so it's really causing me harm.  Help, please!  I set it up to print just in black, but it still does not print until the colors are replaced.

  The Officejet 8500 has separated from the inks and printheads, with "plumbing" to connect.  Printing without one of the present inks ingests between air in the pipes and may damage the print head.

  You need to replace the depleted cartridges.