Alienware Aurora R4 MIO dashboard light flashing?

Similar Questions

• Alienware Aurora R4 MIO ALX Board question

  Hello everyone, I know that this subject and I am about to talk about problem has been discussed over and over again, but I have no where else to turn and do not know how to solve a problem, I have so I'll simplify as much as possible. So basically, I had a case of Aurora ALX of R4 and modified with the motherboard and custom components. I have done all the research before hand and found that particular mother that I would work with the alienware command center and mio Board. I ordered the case and motherboard off ebay I got someone who did the case and all the wires for a living it all for me. I got the case and after a few months rose money to put everything. I finished installing all the operating system (Windows 7 Home premium) all the drivers for the motherboard, my graphics card and set to update everything, including windows. The only problem I encounter is that fans are running high, I can't control the lights, or install Command Center, and the MIO Board is not displayed in my device manager its listed as an unknown device.  Here are the things that I've done so far to resolve the MIO Board.

  1 turn off the computer and removed the power cord then the power button which took place a minute with the power cord removed and plugged the power cord and back on my PC, then checked the Device Manager it says its installed driver software but its still listed as unknown.

  2. installed and reinstalled the command center twice, but doesn't not work or do anything, since the jury is not recognized, the software can't find it.

  3 opportunity Alienware software 32 bit Diagnostics to run the hardware test to see if the Board of Directors in the list it does not work.

  4. install a driver for Asus thermal control that I thought would fix a thermal error that appears in the command center, but did not.

  5. Finally, tried to change the usb cable that connects to the motherboard MIO Board via a header different usb then made power dissapation thing as described above and still no luck.

  So I'm a bit of ideas right now, I can't say if Miss me just one type of software/driver or if I need more recent or not. The Council is still fresh and is not bricked I know, due to the fact that the two lights on the MIO card are still on a bright blue LED one and LED light orange so. Also, when I unplugged the usb cable of the MIO card to the motherboard, fans are silent and all lights work but when I plug it in again and then fans are on max and the lights are out. Any advice/Input would be greatly appreciated.

  Specifications of the computer:

  CPU Intel I7 to 4.0 Ghz

  Motherboard Asus Maximus VII gene

  ASUS Nvidia Geforce GtX 950

  16 GB Corsair Ram revenge

  you posted in lastnight here 22:00, but I have not my notify til today. Bravo, you seem to have picked a winner & get your lights.

  When you have purchased your case & decided to install Windows on a hard disk, this 1st time you booted up, your lights should have at the same time you see your Bios screen & ejected from your dvd tray. Note There are no windows or drivers, just a simple interaction between your gross motherboard bios & mio Board. If I was to eject all my hard drives & turn on my pc, my lights will be lit, my mio Board 'works' without a hard drive. It is hard to say why your last Board was not, however the new works, let's get some software installed for it.

  When you started in 7, you might have kept an eye out in your bar to look for the driver past to install, possibly got a desktop "device driver installation" dialog box or similar, as your way of knowing. Since there is no clear indication in your device manager, you can select USB (& peripheral next HID), Action > search the hardware changes, see what he does.

  Whatever it is, it was me, I would then try to install CC 2.8.9; If the installation fails (error platform), copy / save your temporary files in the temp folder, it created, that you did the last time. When a CC install fails, Council MIO get flashed with the firmware, so spend 2.7 CC, see what happens.

  How should OK, I put it.

  Steps back one, pretend that I did not install 2.8.9. If your curiosity is not satisfied on the windows driver, you can disconnect mio usb, power up / power off, reconnect it shows your systray icon & driver dialog box to see if windows install this driver mio; It will take place without connection, next time he "sees", it it will reinstall the driver, which is the raison d'etre. From there, try installing 2.8.9. Consider this an optional step, if when, earlier you scanned for changes on the usb/hid equipment & 'nothing. '

  What I will say is just me speaking aloud. I noticed that you do not want to move to a CC under 2.6. However, if a version 2.5 recommended by Justin is what you end up with, but you do not want to go back so far (I suppose that you fear a brick flashing firmware), you can try this:

  • put power off, disconnect mio usb, turn on
  • install CC 2.5 hard disk, do not restart, shut down.
  • Reconnect mio usb, power up.
  • Look at your systray icon / installation of the Office driver mio dialog box.
  • launch CmndCntr 2.5, see if it 'works', lights change color, fans have cruise control manual etc.

  It is a workaround, you have installed CmndCntr without the IMU with the firmware flashing & you will be relying on the firmware, it has been flashed with advance by the last owner. If all goes well it is harmony & it all works. If you are satisfied, let it be. You are finished. If for any reason you are not satisfied that, later, you want to try to flash the jury, 2.5 CC to uninstall / reinstall, cross your fingers as we all do, simple as that.

  Note: turn off automatic updates of CC
  

  the tips here are to not allow an automatic update, for fear of a brick, do not allow

• Alienware Aurora ALX lights does not work master of e/s part #.

  I tried to get the lights on my Alienware Aurora ALX job. The only lights that works are the head alien and the flange. Work, I mean that they are white. When I Command Center, it doesn't even show fan/readings of temperature or light speeds. I think that my I/o card is bad.

  I can not get something to change in Comand Center.

  I tried all the solutions on the forums and nothing seems to work.

  I reinstalled windows 3 times. Nothing.

  I reinstalled Alienware Command Center 6 times (correct version and the different)

  I tried shutting down the computer, unplug the power cord and hold the power button for 1-2 minutes thing, didn't work.

  I went to reset the map using the Green rider, did not work.

  I ran a diagnosis and everything seems fine, don't know if it's testing the Master Control I/O Board.

  I'll order an Alienware Aurora ALX Alien FX / Master Control I/O Board, because I am sure that my i/o board is bad.

  The reference is 02JXP2 and version 1.1 mine said A02

  The white mark on my map of IO said A02, but it has the same part number 02JXP2 and version 1.1.

  My question is can I use a Board with the same part number but it says A04?

  Here is a picture of the map of IO with the A02, I want to buy a economy part number 02JXP2 and at the bottom says A04 instead, but is a version 1.1.

  

  If anyone as any advice before ordering the card / advice to see if I can get the lights work on my computer?

  ThatOne_Gamer

  I don't have the cable that connects the motherboard to the MIO card.

  I'm sure that's why my ect lights do not work.

  Right... If it is not connected, it cannot work.

• Council MIO for Alienware Aurora R4

  I have an Alienware Aurora R4 with a case ALX end of 2011 that I need to replace the motherboard.

  Will be the motherboard MSI Micro-ATX with a work of processor I7 - 4790K to replace a motherboard case Alienware aurora ALX and maintain my light and fans

  Dale Hey, I'm on a lunch break, only have a minute. Some CmndCntr old versions can go on a non-Aurora mthrbrd, other more recent versions cannot. Not easy though.

  There are two options because your old mthrbrd cannot be used:

  • Just start in the new mthrbrd with the hard drive, you now who has CmndCntr on this
  • then, uninstall the old software/drivers & install new drivers Z97 etc.
  • That's what we know that re-use of your hard drive / windows install in order to keep CC

  Another option: install an older version of CmndCntr as 2.08.09 that installs on any mthrbrd, but could get glitch with W8 and W10. Ok?

  If your Aurora mthrbrd have always worked? you wanted to give your new mthrbrd a clean installation of Windows & a newer version of CmndCntr? Well, you install a new mthrbrd, pure install windows etc, then a 3rd option, a last resort is then reinstall your old mthrbrd (work) in your case just long enough to install CmndCntr, take that back, install new MB again and that passing your new MB has a newer version of CC on the hard drive, it could then use :

  • old MB is used to pass the software block that prevents installation on a non-Aurora

  All old versions of CmndCntr without a stop block to the 2.08.09 version

  All newer versions which have a block: 2.08.11 / 3.5.x / 3.6.x

  If you now 2.08.11 or 3.5 or 3.6 installed hard disk, I guess a last way to keep this most recent version of the CC on your hard drive - still make a clean windows install for your new mthrbrd - is to do the type of installation where windows keeps your latest files and folders and programs etc., this way CC can remain on the disk. I only did this, but it might work.

  For someone who had a mthrbrd of work, while he was still in the case, they could install the latest / last / latest versions 1, then remove what he & mthrbrd new install, do the overlay install 7/8, CC to keep the disk hard drive etc... all this makes sense? I'm in a bit of a rush here...

  • 2.08.09 & 3.5/3.6 are on Dell.com Aurora pages, listed on R1 R2 R3 or R4 drivers
  • 2.08.11: http://www.dell.com/support/home/ed/en/eddhs1/Drivers/DriversDetails?driverId=442CY&fileId=2990314836&osCode=W764

• Aurora - Council MIO in brick?

  Recently did a BIOS update to A11, and DELL-Chris M could talk me through a few problems of memory, stick, thanks.  Shortly after my only installed HARD drive died.  Upgrading to an SSD and an additional memory while I was home.  Fresh installation of Windows 7, following an order of drivers I found out Alienware Arena forum I think.  Hadn't gotten deep into Tesla1856 positions again, stupid me.

  Problem - at one point that my MIO card seems to have stopped working.  After reading many, many jobs Tesla1856 (very useful, thanks for all the efforts you have put in) I think I might have bricked it by installing the command center off my disk resource (to February 2010) and then upgrade to the current CC 2.8.9.  Probably should have shocked the MIO before the new installation of W7, but had not yet seen the advice of Tesla.

  Current state of computer - well boots, fan works very hard all the time.  CC opens but all time and fan speed see the zero.  I tried the power resets and the withdrawal and replacement of the MIO USB connector.  MIO has an orange light, but he died immediately after stopping, I remember holding the light for a while when I was doing all the memory, bios troubleshooting.   BIOS seems to be unable to locate the MIO card.

  Tried using the 32-bit diagnostics Alienware my resource drive, but he does not see MIO or lights or anything either.

  1 - use the 32 bit my correct resource drive diagnostics?  I don't think that I have a partition more since I did a clean install on new hard drive.

  2 - the only 'unknown' device in my device manager is a USB of something.  I only have my monitor, keyboard, and mouse connected, I suspect that the unknown is the jury MIO on USB1.  its okay?  And only CC provides drivers so if uninstalling/reinstalling CC does not do the trick, no luck?

  3 - I tried the troubleshooting that I could find in favorites of Tesla185h, at least what I understood and could have access to all.   removal and replacement of the USB of the MIO card are "reset"?

  4 - my main question is, making another fees would install Windows 7 and this time having the unplugged MIO and goes directly to the last CC rather than to install one off my original disc of resources likely to help?  or I'm probably looking for a jury of bricks MIO?

  5 - Finally, resembles a MIO Board is ~ $100 new dell or $30 used from various online sources, anyone have experience?

  After almost bricking my motherboard do the update of the bios, find 2 bad slots for memory cards (using 4 now vice 6), with a matrix of hard drive completely, all within ten days; I'm a little wary to enter for yet another party, there again, not sure I want to go through the hassle of reinstalling the MIO card to have an opportunity an of again soon.

  And frankly, I think I'm ready to spend $30 or 100 just to avoid having to do a fresh install of Windows.  I think that there are 250 or so various updates between W7, office, etc.

  At least my computer works now starts, Bios A11 works; but with fans all running all the time, is not a long-term solution, of course.

  I'm really trying to understand if there is no operation troubleshooting more to do before ordering a replacement MIO card.

  Thank you for advice or assistance.

  firstthird

  0 - tried to use the 32-bit diagnostics Alienware my resource drive, but he does not see MIO or lights or anything either.

  1 - use the 32 bit my correct resource drive diagnostics?  I don't think that I have a partition more since I did a clean install on new hard drive.

  2 - the only 'unknown' device in my device manager is a USB of something.  I only have my monitor, keyboard, and mouse connected, I suspect that the unknown is the jury MIO on USB1.  its okay?  And only CC provides drivers so if uninstalling/reinstalling CC does not do the trick, no luck?

  3 - I tried the troubleshooting that I could find in favorites of Tesla185h, at least what I understood and could have access to all.   removal and replacement of the USB of the MIO card are "reset"?

  4 - my main question is, making another fees would install Windows 7 and this time having the unplugged MIO and goes directly to the last CC rather than to install one off my original disc of resources likely to help?  or I'm probably looking for a jury of bricks MIO?

  5 - Finally, resembles a MIO Board is ~ $100 new dell or $30 used from various online sources, anyone have experience?

  6. after almost bricking my motherboard do the update of the bios, find 2 bad slots for memory cards (using 4 now vice 6), with a matrix of hard drive completely, all within ten days; I'm a little wary to enter for yet another party, there again, not sure I want to go through the hassle of reinstalling the MIO card to have an opportunity an of again soon.

  You have an Aurora aka Aurora R1 (x 58 chipset)

  0 - this is bad. It should work.

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19454040.aspx

  1 - Yes, but the download-able version may be newer

  2. it's bad (I think the MIOs bricks look this way)

  3. No, do not reset. It prevents Windows to do it's hardware initial detection on this subject.

  4 - if detected in diagnostic (outside of Windows) equipment, sometimes the second Clean-Install work correctly. Weird, but true.

  5 - parts are always a gamble. Vendors claim that everything works fine. Sometimes Yes, sometimes no.

  6 - another bet on this system. I would have stayed on the A09.

• Alienware Aurora r4 does not start with new graphics card.

  Hey,.

  I have an alienware aurora end of 2012 I believe.

  I currently have a series of 6800 AMD raedon graphics card, processor 3930 r9 k i7 and 8 GB of ram.

  I recently bought a MSI gtx 970 game to replace my old graphics card. I plug this card and it even lights up when I turn on the computer, but however my pc only happens to the start screen where I get the choice after pressing F2 and F12 and then freezes and I can't do anything. I then hear 3 beeps of inside my pc and then it proceeds to a blackscreen where my only choice is to turn it off manually.

  I tried to uppgrade my BIOS without much success (dident make it work), uninstall all graphics drivers from AMD, but nothing has changed.

  So I'm clueless I'm kinda a noob of the pc and have no idea what could cause this and would love help to explain what happens if all goes well if anyone knows a fix.

  THX in advance :)

  You you connected all power cables required PCIe 970? They are probably different config as AMD-6800. You should have 875w PS, but you might need to check that.

  Probably should have uninstalled AMD Driver Suite (catalyst) before removing the card from AMD.

  If card MSI BIOS a double switch, you can try another position.

  Try Mode Windows safe.

  What operating system do you use? Are you running the UEFI BIOS or legacy Mode?

• New Alienware Aurora R4 freezes every time in 50 minutes

  I just got my new Alienware Aurora and oh joy, my first time owning this beautiful Monster - looking for a machine.  I have owned it now for five 5 days; but the experience so far has been frustration, to put it lightly.

  The machine never stays more than 60 minutes at a time.  It crashes.  When it crashes, I hear the fans always roll the led still under the display theme AlienFX I put and it seems that everything is fine, but:

  1. the SCREEN turns off

  2. the keyboard does not work, systems is not responding to strikes again... as the keyboard is dead.

  3 mouse works now.

  4. nothing works, except the DVD tray that always comes out and in.

  5 only the resolution is to force close it down and then turning it back on, via the power button.

  I just installed MS Office, my keyboard and my mouse.  Nothing complicated.  I've now adjusted the power management to ensure that the disc hard system, display, etc. NEVER goes to SLEEP.  Yet, the machine still crashes as usual.  I'm not even games.  Simply creating a document, or watching a training video.  I even decided to just share my training on the Alienware video file and watch the video from another computer; accidents still Alienware and my video stops.  I decided to disable Windows Update, still problem persists.

  I checked EventViewer for clues, NOTHING.  No log entry for when the system unresponsive.  What kind of a computer is what the hell?  I thought that with Alienware, I won't have any hassles, but this has been an exercise in troubleshooting non-stop for me since I got this computer; It became a distraction, as whenever I sit down to work, I find myself troubleshoot the computer each time.  I'm now trying to force me to forget everything and just use my old laptop; that I supposedly replaced when I upgraded to this Alienware machine.

  It's Sunday today, I intend to call technical support for Dell tomorrow to start the support process.  But to give up some lines here just to get feedback / if there are similar experiences that can shed some light on this problem.

  Please any response that can point me in the right direction will be appreciated.

  Hello

  Yes.  A quick update from my post.  I called Dell technical support on Monday 20 October 2014 and the guys were fantastic.  I spoke with a guy named Bogdan; He spent almost 3 hours working with me on the problem over the phone.

  I'll give you a detailed below:

  At the time that I called him, the computer was no longer able to boot the system.  This is because the previous night, I have run AlienRespawn default factory reset, but the shutdown of PC in the process and then was not start over; and instead showed the blue screen.

  So on the phone with Technical Support, we used AlienRespawn USB backup I had created the first day to reset the computer back to factory default.  And then I connected and put things up so that he can have the remote connection to the computer.  As soon as he connected, the computer decided to die just so :).  So we decided to do the Reboot usual cold.  And once again, as soon as it is connected and looking to run some test, the computer exploded again.

  On the third attempt, the computer remained.

  Bogdan then via a remote connection session, several controls and ran several stress-tests on virtually everything (RAM, CPU, graphics, etc.).  All tests came out, as adopted.  And then we installed software to monitor temperature and other stats like stress tests were running; all readings were really good.  Source of the problem was not yet clear.  We have been jointly shrink on two possible culprits, the graphics card or motherboard (or both in the worst case).

  As we are still brainstorming and then try the AlienFX theme colors, the computer decided that it was time to STOP, once again.  And this time it faced a 6 six sound beeps sound sequence several times.  He did this once before, the previous week.

  The machine had a mind of your own.  It was very random behaviors all the time.  He gave beeps when he wanted to.  He has changed the settings of the BIOS on its own; change the default settings, mode strives / EUFI, etc at random :).

  So we turned and technical support preserved in tests.  He also uninstalled and reinstalled the updated version of the Alienware Command Center.  Even after that, all the readings and the results were perfect, but then Switched OFF the machine once again.

  Makes technical support a call to change the four main components: motherboard, graphics card, MasterBoard and Water-Cooling system for the next day.   So I was expecting an engineer for the next day.  That evening, I decided to install all my software and turn on the computer to a State that is useful for my work and play.

  The morning next day (Tuesday), I decided to continue to use the computer and just keep restarting it out every time.  And then, at some point given around 10:00, he remained THERE for nearly two hours (first time he stayed on this long), I was pretty sure that the problem had gone for an unknown reason.  And to share the joy with my Mrs, the machine went OFF :).

  And this time it's completely DEAD.  It was not turn on anymore.  The LEDs and fan are turning on, but not to life on the screen, the keyboard or the mouse.  It remained so until the Dell technician came.

  To my delight, a Dell technician was at my door at about 14:00, with all the necessary parts.  He was also very friendly and empathetic.  He quickly set to work and replaced all suspect parts.  We went ON and, oh joy :).  The machine came back running.

  He made all necessary BIOS settings and my machine was fully operational.

  I used it for almost 2 days now and no problems at all so far.  It's been great, even if sometimes it's like the trauma remains... I still fear that he might simply turn off on me anytime.  But so far so good.

  So I can say at this moment, the issue is resolved and my device is fully operational.  Thanks for the support.  I hope that my very long story somehow help others who have a similar experience with their machine.

• Alienware Aurora R4 attends BIOS blinking cursor

  My brother turns on its Alienware Aurora R4, Windows 7 (64 bit) / and BIOS version A06 BIOS splash screen comes up as usual, the loading bar gets about 25% of the full path, then it will beep once and the screen goes black with a flashing cursor (line underscore) in the left corner high and there it is.

  Without these changes have been made to the machine (hardware or software), and he has not had problems before; However, he managed to disconnect the machine as he ran the previous night, and the blinking cursor boot was apparently the first boot from.

  I have really no idea where to go from here in terms of diagnosis of the problem, but I have a vague feeling that it is an easy solution...

  Any help is appreciated, I have not found many similar problems through google...

  We thought finally it more filled its hard disk to the point windows could not start. I hope this information helps someone else.

• I want a new Alienware Aurora ALX to have double EVGA NVIDIA GeForce GTX TITAN graphics cards in SLI config. Is this possible with the latest ALX Aurora motherboard has?

  I buy my fiance an Alienware Aurora with these stats:

  Base: Alienware Aurora ALX 875W matte black frame w / AlienFx ColourPre
  Processor: Intel Core i7-4960 X processor Extreme Edition (6 cores, 15 MB of cache, up to 4.3 GHz overclocked)
  ASETEK liquid cooling CPU
  OS: Windows 7 Ultimate SP1 64-bit
  Graphics card: Double 6GB GDDR5 NVIDIA GeForce GTX 780 SLI
  Memory: 32768 (4X8Go) MB 1600 MHz DDR3 Quad Channel
  Hard drive: 4 TB RAID 1 + 0 (4 x 2 TB SATA 6 GB/s, 7200 RPM, 32 MB of Cache)
  Optical devices: 8 X RW Blu - Ray (Blu - Ray, DVD, CD read & write) & 24 x DVD +/-RW
  Sound card: Integrated HDA 7.1 Dolby Digital capability
  Speaker system: Logitech Z506 5.1 Surround pregnant 75W Total
  Game keyboard: UK (QWERTY) Alienware TactX keyboard
  Gaming mouse: Razor Naga Molten
  Two monitors: 2 x Dell UltraSharp U2713HM 69 cm(27") LED monitor DVI, VGA, HDMI (2560 x 1440), DP black UK

  I went to very difficult to leave my boyfriend to buy this pc.  First of all, that we now live in different countries.  I live in the United States and he lives in England.  We met on a PS3 game online called DUST 514 and played a lot of pc games together as well.  It is difficult to have to steal it back, but we're getting married soon and I'll come to England.  He needs a new PC for years and was jealous of my Alienware Aurora R4. So I decided to buy one that is still better than mine since it's even greater player I am . This will also allow us to play more games together .

  Then I he wired the money and thought that everything would be ok, but you wouldn't believe the amount of screw - rises, that Dell threw on him!  They had even cancel a bunch of commands of the peoples, b/c, trying to control his spec-ed on Alienware has revealed a major screw-up affecting many clients... (Sorry, it made me delete/modify-this until his order passes through.  Dell representatives were concerned about what happened past.  I don't know if they told people that they had to cancel the real reason why orders and the possible impact on customers with currently Alienware Aurora...  I'll tell you what they have done after that his order is finally through.  Just a hint... inside your Alienware Aurora, check if you own to make sure that everything you ordered is actually there...)  He tried to do this for a week now...  I thought Dell was a little better than that... I knew they had bad grades, but really?...  In any case, it is a complete system stressed mess of it all back and on phone calls and e-mails with different people of Dell.  So I thought that, if it still manages to get the Alienware, maybe I can do even better!

  He really should have an SSD, so I'll get a. He was talking and drool on the maps of Titan, so I'll give him two EVGA NVIDIA GeForce GTX TITAN Superclocked 6 GB GDDR5 2DVI/HDMI/DisplayPort PCI - Express cards in SLI config! : http://pcpartpicker.com/part/evga-video-card-06gp42791kr

  I've never built a pc or tinkered with all hardware.  I want to make this even more impressive pc by adding an SSD.  I think I can install an SSD without any problem (I want the Samsung 849 EVO Mz-7TE1T0BW 2.5 "1 TB SSD)... Oops... I just thought of something... 4 TB SATA is actually 4 2 TB SATAs, put in place with 2 as the mirror...  I think that there are only 4 connectors for extension for SSD/HDD... Is this correct?  I have to replace one of the SATAs 2 TB with the 1 TB SSD?  What configuration I would define then the three SATAs 2 TB?  Would it be to say that he would have only 1 TB SATA? Could I set up so that it has SATA 1.5 TB (with SATAs split with half active and part of the half of the mirror for a RAID configuration)?  Furthermore, I have really no idea what RAID is or fact, just that you only half of total storage really active and the second half is as a backup in case of failure of a disk or something to avoid any data loss total... It is also the thing that I'm confused about that I don't know if it is also possible to install two graphics cards of Titan in SLI configuration on the micro ATX motherboard, I guess its Alienware Aurora will be, and still less 1 Titan.  Yes I know it is exaggeration lol, but the game is very important for us, especially since this is how we met.

  Sorry for the long post... Finally, the MAIN POINT & QUESTION:

  I have to install a different motherboard like the Asus Rampage Black Edition IV: http://pcpartpicker.com/part/asus-motherboard-rampageivblackedition in order to install two Titan GPU in SLI configuration?  If so, how this O_o...?  Also, I heard that there is a 'girl' Council that controls the Alien FX LED lighting and ventilation Active... How to connect to the new motherboard (if I need to get a new one)?  Also if I get the other motherboard (if this motherboard work with everything) this motherboard would have space for 4 x 2 TB RAID 1 + 0 and the 1 TB SSD SATAs?

  Please answer.  Thanks, ~ value

  Setsuka

  to install two Titan GPU in SLI configuration?

  Don't know why you config-ed with two years 780 in SLI if you want two Titan-SLI but this guy did:

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19512935/20402844.aspx#20402844

  Personally, I'd keep just 780 - SLI, since the two configs end up being very similar to the performance. Either they're going run hot (in the game of max.).

• (Redirected) Power Alienware Aurora R4 problem

  My Alienware Aurora R4 light not after a black out home. I took it will be checked and technology, said that the power supply does not work. I decided to look for a power supply, but as I'm in Toronto, the Canada, it is difficult to find dell parts unless you buy online.

  I managed to find a PSU in my town that seems identical to that on my system, but I don't know if it will work on my system.

  Original Power Supply Model # H875EF-00 (that's the one that was inside the alienware aurora r4)

  I found - power supply model # H875E-00

  Two of these blocks of output 875W power but there is a difference on the sticker by reading the tensions here is the difference between the two models:

  Model # H875EF-00

  INPUT AC (50-60 Hz): 100-240V ~ / 12.5 A

  + 5V AND + 3.3V SHOULD NOT EXCEED 225W

  ---

  H875E-00 model says no.

  INPUT AC (50-60 Hz): 100-240V ~ / 14A

  + 5V AND + 3.3V SHOULD NOT EXCEED 150 W

  I would like to know if it is possible to replace the power supply with the model #H875E-00 in my Alienware Aurora R4. This power supply would cause computer damage or make one of the components do not work properly.

  Thanks for help you.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Graphics card problems: Alienware Aurora R4

  Hello

  Today, I tried to install a new 770 GTX graphics card in my system, replacing the 1 GB GDDR5 NVIDIA GeForce GTX 555 I had initially installed in the system, the graphics card by default. Having no experience with computers, I talked to my friend who gave me the correct warnings to recognize with respect to electrostatics.

  I followed this official video on YouTube and came out of my old graphics card and replaced it with my new. When I started the computer, Alienware logo appeared (with messages you can press F2 or F12) before turning into a black screen with a flashing icon of cursor/underscore (_) in the upper left corner. No key worked.

  Then I tried to replace it with the original graphics card, that had the same issue - but I noticed the blinking cursor was slightly further away from the upper-left corner of the other graphics card. Even if there is a difference, however, neither worked.

  Given that the system has two PCI Express slots, I pulled the screws for metal which has blocked the second and tried to move the GPU. Yet, I was getting the same error.

  After having looked up, some said they had the same problem (on the YouTube comments for linked above video), as well as vary the technical support forums. An answer to this is that the motherboard had blown perhaps. To test this logic, I took the charger for my mobile phone and plugged into a USB port on the computer... the phone has started to load.

  The BIOS does not seem to load, I tried the keys so many times. I contacted ASUS, who did the graphics card, but they do not seem to know, either. This is literally my last resort.

  Thank you.

  --

  Precision on the plan before that:

  Intel Core i7-3820 (four main, 10 MB of cache) 3.60 GHz
  Alienware Aurora: 875W matte black chassis
  Memory: 8192 MB (4x2Go) 1600 MHz DDR3 Quad Channel
  Hard drive: 1 TB SATA 6 Gb/s (7200 RPM) 32 MB Cache
  Graphics card: 1 GB GDDR5 NVIDIA GeForce GTX 555
  Operating system: Windows 7 SP1 Home Premium (64-BIT) English

  camlem

  Hello. I have what I believe, it's a very simple question, I want to just make sure before I invest the money.

  Can I use any card Nvidia GTX 780 on my Alienware Aurora R4? In my opinion, there are different brands (Asus, EVGA, Gainward, Gigabyte) and I wonder if this would work ok. Are there significant differences between those marks and, if so, which do you recommend?

  My current characteristics are exactly the same as the original poster:

  Intel Core i7-3820 (four main, 10 MB of cache) 3.60 GHz
  Alienware Aurora: 875W matte black chassis
  Memory: 8192 MB (4x2Go) 1600 MHz DDR3 Quad Channel
  Hard drive: 1 TB SATA 6 Gb/s (7200 RPM) 32 MB Cache
  Graphics card: 1 GB GDDR5 NVIDIA GeForce GTX 555

  Thank you!

   
  With 875 watt PS, it should work.
   
  Most of the eVGA cards have lifetime warranty (exact model of watch no./SKU you buy actually). I would buy eVGA.
   

• Indicator light flashes yellow.

  The light - usually green and steady - hand flashes yellow. A Wi - fi connection is always connected.

  The yellow light flashes when the airport router has a message for you.

  Find out why the yellow light flashes when opening the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the AirPort Extreme

  You see a button update?  If so, click on it

  

  Otherwise, find the status setting and click on the little orange dot it for more information

• Is fallen from MacBook Pro, light flashes three times, won't start

  HHello, fell of my MacBook Pro 2011, about two feet on the ground, there is no external damage.  Front light flashes three times and will not start.  Tried holding button, smc, pram.   Have been reading about the RAM.  Maybe it's in bulk, hope that's it, that is.  Don't have the tools (unibody).  Any ideas, help?  Thank you

  CCan really turn on and off with power button flashing light / stop.  And can hear the click (assuming it's the disc) turn off.

• 32D1334B LCD TV - not light power light flashes red & Green

  I have a Toshiba 32D1334B LCD TV, it used to work perfectly well and then all of a sudden, it will not activate.
  When I plug in the TV, the power automatically light flashes red and green permanently. There is no way to turn on the TV; the screen remains black.

  I had to take off the back, watched and deleted all the parts, but can not see the obvious problems. I also a multimeter and power to the various sections of the TV is, but that's as far as my electrical knowledge goes!

  I don't really know what else to try, but I am very reluctant to throw away the TV that I know it's probably a unique piece that needs to be replaced to fix it. I searched online and others have reported the same problem exactly, but it had not resolved there always. Unfortunately, TV is more under warranty... If anyone has any suggestions or can provide any help, then it would be greatly appreciated!

  Thanks in advance.

  If you find out how to fix it please let me know because my tv is the same.chris

• charge light flashing problem with hp probook 4530 s [redacted]

  I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.

  more information:

  Windows 7 ultimate 64-bit

  BIOS version: F.25

  [number removed for privacy]

  Finally, I think it worked.

  bios for update

  Version: F.40 (March 12, 2013)

  its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.

  No problem flashing light up now.

  hope I never face again the blinking light problem. God willing.

  Here is the download link for the latest version of the bios:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5060880 & prodNameId = 5060882 & swEnvOID = 4053 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116443-1

  Note: the BIOS update is sometimes risky, so be careful and follow each instruction.