Alignment of the button problem

Similar Questions

• Alignment of the buttons in the form of

  Hello world
  I'm new to flex and a basic doubt. I create a form of simple login with username, password entries and submit button. I then added another button to clear the fields in the text entry boxes... and I need these two buttons I have a line. Unfortunately, I get the button Delete in the next line. I would like to know how I can take him as well as the Send button of the form.
  Here is the MXML code I have worte:
  < mx:Form >
  < mx:FormHeading label = "Login HonTop" / >
  
  < mx:FormItem label = "Name of user" >
  < mx:TextInput id = "unameText" / >
  < / mx:FormItem >
  
  < mx:FormItem label = "Password" >
  < mx:TextInput id = "passText" / >
  < / mx:FormItem >
  
  < mx:FormItem >
  < mx:Button label = "Login" click = "submitLogin ()" / >
  < / mx:FormItem >
  
  < mx:FormItem >
  < mx:Button label = 'Cancel' / >
  < / mx:FormItem >
  
  < / mx:Form >
  
  Thanks in advance,
  -Abdel Olakara Ali.
  http://olakara.googlepages.com http://olakara.googlepages.com"> http://olakara.googlepages.com".

  OMG I am so happy that I am able to help, I just learn cela 5mins there is, you need to create a Hbox inside your form. that will align them in 1 line

• Hover over the buttons problem

  Hi, sorry I'm new to all this... my problem is that I created a page with 8 color option different roll buttons of this change, the image of the appropriate color when you hover over each button... currently it is that everything on a single layer with the color change diapers confined to each button... My problem is when I test the image of my buttons show a roll more, but the image field never changes... that I have to have every button as a layer or am, I'm just off track...

  Thank you for your help...

  The first error indicates that you have two functions with the same name... which is not allowed.

  The other can mean you try to use a variable any which is already a word of Flash code, so he sees that you are trying to change the ending of this code (I'm only guessing which is which could be bad for this error message)

  I just noticed something that can cause a problem:

  navigateToURL (WWbutn, "_blank");

  should be

  navigateToURL (WWbutn_req, "_blank");

  fix? (check because I am doing this from memory)

• Clickable area of the button problem

  Hello

  I use flash 8.  I am tiring to create a button consisting only of text, so when you test the movie the clickable area is that the body of the text, as I create in the top, most or the lower part of the State. So I draw a rectangle in the Hit State, but when you test the sound button always in the same quality.

  What can cause this?

  Thank you

  S

  You are probably using a selectable textfield.  In the properties panel, make sure that you have designated the textfield as not being is not selectable.

• How to set the alignment of the right button on the toolbar

  Hello

  I place a text button and exit on the toolbar

  

  I want to set the alignment of the button (Logout) right and output text (welcome weblogic) remain the same as it original position (Left). I have this rhythm on the toolbar of the control panel.

  How can do this?

  Hello

  Use this option instead of the toolbar.

  Layout = "vertical" >

  inlineStyle = "float: right;" / >

• Lightroom 6.6 Menu is not in line with the buttons

  After the upgrade to Lightroom 6.6 part of the menu do not align with the buttons.  For example, when you use the crop and straighten tool, next to the "Aspect" If you click on 'Original', a menu will appear with different options.  Before the menu seems very close to where I clicked, but since this last update it shows up in the lower left corner (essentially the opposite side of the screen).  See the screen capture below attached.

  Note that this happens with everything except menu for windows menu bar items (IE IE file, modify the work correctly, but others such as the Balance of whites, lenses, ect. correction show this problem).

  I don't know if that's a bug or an intervention of the strange apparatus that causes this problem.  I work on a Lenovo Yoga 2 Pro, so the screen resolution is 1800 x 3200.  It is also a touchscreen and 10 Windows running.    Note: I've also uninstalled and reinstalled lightroom, without modification.  Any help with this annoying problem would be appreciated.  Thank you.

  

  A known issue also noted in this thread-

  Some menus pop up in the wrong place

• Red highlight on the buttons

  Can someone explain to me what is happening here with the Red nail.

  

  If you are referring to the slight truncation, which appears in the subpicture highlight of the upper part of the button, it probably was pushed with the tool move in PS. The alignment of the buttons layer sets can be positioned with the move tool.

  If it's something else, can you elaborate a bit more?

  Good luck

  Hunt

• How can I get my guides to align the work plan using my align palette? Whenever I hit the button Align, the guide turns completely off the drawing surface.

  I'm not crazy, he used to work. I could use the palette line up to put my guides centered, right-aligned, left-aligned, etc. I started having this problem in CS5 when I hit the button Align and the guide would go completely out of the drawing surface. I thought it was just a bug and would leave with upgrade to CC. But I'm getting the same problem! So boring.

  It's an old bug that sting when you line up with the palette alignment guides while using an extract of the limits is selected.

  You can disable it in the General preferences or in the drop of the alignment pallet.

• GRIMBOT webmail I lost functions like delete button and light the contents of the Inbox. It is a computer problem, all three of my browsers have the same problem

  Web mail indicates it has mail in my Inbox... but it does not show in the display. I pour the contents in the trash to read the mail.

  I lost the function of the button Delete... I have to use the button remove on my keyboard

  This problem occurred after I installed several plugins to download youtube videos. I disabled the plugins... I deleted Firefox and reinstalled... no change.

  This problem also occurs with IE and Chrome. I guess that's a computer problem.
  I confirmed that I have the latest flash installed and running on my computer

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

• Remove button in the button menu star in the address bar has a problem, there is no legend...

  When I click Sta Button, a small menu opens, it has a button with "Remove" captioned on.
  It's been several months the legend disappeared, it's empty instead of 'delete '.
  He was there since version 15, I update my Firefox immediately when come updates and that doesn't change.
  How to bring and solve the appearance problem?

  Hello Hasin, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, probably an addon intrudes here...

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• By clicking on the button options to add ons causes the addition on the window to hang on the 3.6.3 version but without problem on 3.5

  Add on the window crashes whenever I select the button options

  This has happened

  Each time Firefox opened

  == I upgraded to firefox 3.5 to 3.6.3

  What is happening to me with all the Add-ons, but only since the Update June 24 my Firefox 3.6.4. When I opened Firefox after the update, all traces of my Add ons were gone (Zotero, StumbleUpon, ForecastFox, Delicious Bookmarks), although he said they were located in the window modules. Neither uninstalling and reinstalling modules individual, not more than all of Firefox, or uninstall Firefox and re - install Firefox 3.5 has worked to solve the problem and when I enter the window click options on any of the Add-ons and modules that window freezes, and despite the main window of Firefox is still functional, you must restart Firefox to release the window modules. I'm afraid that all evidence of my modules disappeared.

  This, but described a part of my problem, but it seems not get quite the show or provide a solution.

  Any thoughts?

  • • UPDATE *.

  How that response could possibly solve the problem? I just rephrased the question! If I have an answer, help me help me please!

• Problem with the buttons 'Internet' and ' CD/DVD"on the Satellite X 200 - 22U

  Hello

  I use a laptop Toshiba Satellite X 200 - 22U with Windows Vista Home Premium.
  My problem is: I want to create an application to start with multimedia keys ('Internet', 'Disc'). I registered it with TOSHIBA, but the buttons ' CD/DVD' and 'Internet' do not work. In the TOSHIBA Assist Button Manager software, I see "¥" (yen mark) instead of the "------" (backslash) in the path field. I checked it in REGEDIT, where everything is OK, I see the path correctly. But these two buttons do not work. ' Play/Pause', 'Stop', 'Previous' buttons 'Next' work with Windows Media Player.

  Please, help to solve my problem!

  Thank you
  McLawrence

  Have you installed the latest version of Toshiba Assist?
  To do this, look on the Toshiba site and also check if there is a new BIOS.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Satellite A300 - replacement for the keyboard button problem

  Satellite A300 broken my number key 3.
  Easy to fix but still Toshiba have charged me £43 to replace it with a new full keyboard.
  It is less than 6 months old and still under warranty.

  What an absolute joke, I wouldn't have another toshiba again.

  > What an absolute joke, I wouldn't have another Toshiba again.
  Well, it is your personal opinion but I agree.

  However, if you understand something about laptops so you'd know that the single button can not be replaced.
  Only the CAP can be replaced but not the button on the keyboard, and thus the entire keyboard needs to be replaced!

  In addition, the guarantee only covers hardware problems that are not caused by laptop user I n don't know why the button on your keyboard is broken (maybe you was your fault) but I think that you have contacted the ASP in your country and talked to the technician then why you didn't explain that it wasn't your fault?

  In any case, the case should be clear now

• Satellite P300 - problems with the buttons of enlightenment

  First of all, I would like to apologize for my bad English, I'm French actually.

  Hi, I bought a laptop Satellite P300, a couple of days, and already I have a problem with tactile keys (one on top of the keyboard).

  Actually, the only one of the left, which is supposed to turn off the sound used to keep away the keys lights and Satellite logo. One day (and I don't know why), when I pressed her, she actually cut the sound. And now, the first two keys (mute and shortcut of windows media) do not work, but the other four (Media Player control).
  I tried Toshiba Assist, and the tool for the configuration of the pushbuttons (I don't know the English name of this tool) but I couldn't set the keys, they were not on the list "button name".

  So, does anyone have an idea how to solve this problem?

  I apologize again for my English.

  Hello

  I assume you are using Windows Vista because you bought the laptop a couple of days and so I think that you should try to reinstall the Toshiba value added Package. This package determines the buttons of the lighting that you mean and others (for example the FN keys too).

  The latest version, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  1. download the latest PPV on the Toshiba site
  2. go in Control Panel > Add/Remove programs. Find the Toshiba value added package and remove it
  3. restart the laptop
  4. download and install CCleaner. This cool cleans up the registry of Windows and system files. He should find some registry keys of Toshiba you should remove with CCleaner.
  5 reboot the laptop
  6. install the PPV that you already downloaded
  7 restart once again

• Problems with the button "INSERT."

  Hello

  I have a problem in my homework. I need to do the following:

  "original numbers" table contains zeros. Let LabVIEW fill a table 'original numbers' by random integers from 10 to 90 at a rate 1 number/0.5 seconds by replacing each zero both from top down. (FACT)

  the user fills out 10numbers in a 'numbers inserted without doubt' table. The user then decides if it needs to change a generated number that he dislikes changing table "insert."

  Then he presses the button INSERT and a resulting table appears containing the items that the user has changed...

  This video could clarify:

  http://www.YouTube.com/watch?v=dDXo2ABqNM4

  The problem I face is the button INSERT. In the video, at the moment he is passed the program will continue until the last part.

  I enclose the vi. I think that there is no logical errors in the program except the INSERT box structure.

  Thank you.
  PS version is LabView2010; I get error when trying to save in the desolate previous versions.

  A.A.A. wrote:

  1. What does it mean to turn off automatic indexing?
  2. I did not understand why we used the palette table to remodel. What are the dimensions of the entry and exit? Very nice way how you did a length of 10 zero array. (I'll use when I guess that the solution to the problem of dimension.)
  3. Have you used the expectation of 100 ms to do not affect the performance of the computer or for another reason?
  4. How where you can link the table Palette not equal 'changed' numbers?
  5. Where did you get the button "replace"? I think that my button "insert" is the oppositeof he needs to do.

  Your code still has major flaws. Your questions are very basic, and I recommend doing a few tutorials.

  1. If wire you an array through a loop limit, the tunnel can have two modes (plain (solid square) or autoindexing (contains a small set of brackets)). In your case, you are autoidenxing the table 1 d, creating a 2D (two lines) table at the end of the first loop. You generate 10 x too much data! (create a KPI 10 x 10 on the 2D table to see what you actually do!). You can right click on a tunnel to switch between the modes of indexation. A simple tunnel carries the unchanged data in the table. A tunnel exit autoindexing, creates an array to a higher dimension, in your case a table 2D of a table 1 d with a new line by iteration. If you autoiindex one scalar value, you get an array of 1 d with a single element by iteration. A tunnel entrance of autoidexing does the opposite. If wire you a table 1 d to a loop FOR using autoindexing, you get a scalar by iteration and the loop FOR stops once the table runs out of elements. Is equavalent (with some differences) for wiring without autoidenxing, then using "index Board" with the index wired to [i] as you currently do. In your case, you should get the table 1 d since the shift of the first loop register, it has all the information (!) and autoidexing on the edge of the second loop off, and the result would be the same, except that you use only 10% of the memory.
  2. Once you are autoidexing to a loop limit, a number of loop iterations FOR will be determined by the size of the smallest table autoindexing. It would be a problem if you later want to modify the code to work on for example of 20 elements, because the other two tables in my code would force the loop to stop after 10 iterations. 'Resize the table' can be used for upholstery/trimming tables and in this case we are accommodating to the length on the main Board to ensure that the loop FOR does not stop prematurely. In your case, the berries to replace and switch are empty by default, if the loop would not turn at all unless you enter values. "resize the table" brings them up to the waist.
  3. Yes, you need a small wait inside the other case, or elsewhere in the while loop. Without delay, the essentially empty loop will turn millions of times per second, consuming all CPU in the process while doing nothing. No human can click a button with this kind of temporal resolution, so a wait 100 ms is not noticeable, but will fall CPU utilization to a negligible level. Your computer has dozens of processes running at any given time. Imagine how it would work if all programs would consume all CPU, they can possibly get?
  4. I compare two tables, and the result will be an array of Boolean. You are comparing only two scalars and you won't get a table. Also, you do not have the 'AND', because if the values are different, it must be true anyway. In your case, you will need to wear a similar table of Boolean in the table number, replacement of the elements as you go.
  5. A button is a button a button. There should be no difference. You can change the label text Boolean, default value, and mechanical action to match your needs.

  A.A.A. wrote:

  
  I had to initialize the tables full of zeroes but the way you did much simpler.  How to initialize them to zero? (where did you get the pallets? I've attached a picture clarifing my question.

  Here are the local variables. You don't need to find them in the palettes. Simply right click on a terminal and 'create the local variable '. Voila!

  (Local variables can serve as an indicator of reading or writing to a control. However, because they break the flow of data, you can generate dangerous racing conditions. They also force copies of additional data in the memory. Do not use them as "variables" in the text according to the code. Except for the interface initialization interactions and the user, they should be used sparingly and are rarely needed. In principle, my code has a theoretical condition because the order of operations is not determined between three sections of the code are independent. For example if the initializion would happen after the execution of the second loop, you will get an unexpected result. This will never happen in this particular case, but in other scenarios, it could be a problem.)