All custom settings does not work

Similar Questions

• Apps disappeared and the laptop settings does not work

  All my applications disappeared from Windows 8.1 in my user account, even if they are still there in the guest user account. I checked this forum and tried a lot of things that have been proposed by other users, but nothing has worked. I can't create a new account with administrator privileges, or refresh my laptop because the "change PC settings" does not work either. I already tried this: http://www.thewindowsclub.com/broken-change-pc-settings-link-windows-8-1

  And I just get the message «Deployment failed [...]» the system cannot find the file specified. "

  I think that this problem was caused by a virus, because it happened right after that my anti-virus kept warning repeatedly "threat detected". I followed the guidelines to remove malware etc.

  Hello

  Please consult the complete steps and after trying them, try the steps mentioned in the article in your query:

  http://www.kapilarya.com/fix-modern-apps-not-working-after-upgrading-to-Windows-8-1

  Moreover, if that fails, you can try to create a new user account from the control panel and see if the laptop settings works on it.

  Hope this helps, good luck :)

• my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why

  my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?

  You must download and install the appropriate drivers for your version of Win7 from this link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us

  I hope this helps.

• Drawing a custom profile does not work for me. It works for you?

  Drawing a custom profile does not work for me. It works for you?

  I can only apply on an existing line, but cannot make a new one with the selected profile. In fact if I change the profile other than the default uniform I also can't draw a new stroke with any other width than the default 1 point. This does not seem normal.

  Use the SC5 on a PC.

  You have "Art has basic appearance nine" checked in the appearance Panel Menu? If Yes... Clear the check box, and then try again.

• Crush the account for new host settings does not work.

  I would be grateful if someone could help me, my email hosting company a supplier has changed, but my two addresses remain the same. Crushing my two POP3 accounts with the new settings of the server does not work. I checked with the new owner that the settings are correct, but they suggest that this problem is probably down to Thunderbird and profiles in a way works and is outside their mission of support. My provider is puzzled, but to be honest I only have a small amount of ability here. I need to keep all of my old emails and their structure files and to get the connection to the new servers host works. Anyone who wants to help?

  Thank you, Simon

  I had the help of my provider to fix this.

  Basically, you cannot overwrite an existing account with new parameters. The answer is to create a new account and edit the old one so it does not carry the same settings of server and user name. Now, I spend all my archives of old emails to the new account, but which is described elsewhere, I think.

• UCM, RIDC sorting using custom metadata does not work

  I'm doing a search using GET_SEARCH_RESULTS and I am trying to sort the results, but unfortunately it does not work. I get this exception:

  Unable to retrieve search results. Error occurred while retrying the search query. Error occurred while processing. Unable to return results.
oracle.stellent.ridc.protocol.ServiceException: Unable to retrieve search results. Error occurred while retrying the search query. Error occurred while processing. Unable to return results.

  at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:142)

  at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)

  to the sample. Connection.main (Connection.Java:661)

  The binder is like:

  binder.putLocal ("IdcService", "GET_SEARCH_RESULTS");

  binder.putLocal ('ResultCount', '10');

  binder.putLocal ("QueryText', 'xDocAudvTitle < contains >"togados"');

  binder.putLocal ('SortField', 'xDocAudvTitle');

  binder.putLocal ("SortOrder", "Asc");

  
  

  If I do not use the sortField and SortOrder parameter, the query retrieves the correct results.

  
  

  Any idea on this exception?

  
  

  Kind regards

  Juan Carlos.
  

  Thank you all,.

  The problem is that the custom metadata field is of type Memo, both because of its size is not optimizable, so I can't sort by using xDocAudvTitle.

  I'm done with the help of another field to sort.

  Once again, thank you to you two.

  Kind regards

  Juan Carlos.

• "import settings" does not work photos & videos.

  "import settings" text link does not work when you import photos & videos form the camera when I want to change the location of the destination import folder.  He previously worked!

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Method:

  I suggest you to see the links and check.

  Change the settings for importing pictures and videos

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  See also:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computer

• (All the choices) does not work online dashboard

  Hello
  
  I created a line of dashboard with drop-down control using SQL result. Now, when I run it, I noticed that when (all choices) is selected in the drop-down list, this does not work, but if an item is selected, it works fine...
  
  Help please...
  
  Thanks in advance :)

  Hello

  check once this post... [http://108obiee.blogspot.com/2009/04/detecting-all-choices-from-dashboard.html]

  Thinks he can help you.

  KR,
  A

• Regional settings does not work with WordNum()

  I have this form with a field that must be filled in with text corresponding to a value field, automatically.

  So I got this:

  Form1. #subform [0]. extenso::calculate - (FormCalc, client)

  textNumber = WordNum (total,,0 "pt_BR");

  .. .and nothing happens, the values are converted to text in English, not Portuguese.

  Where is the trap?

  I also changed the locale by default PDF in Brazilian Portuguese Designer. Still does not work.

  Help, please!

  Marcos

  Looks like it is in English only - just noticed a note in the docs that says "starting from this version, it is not possible to specify a locale identifier other than English for this function."

  The version of the doc that I have is for 8.1 then it can always be true depending on the version you are using.

  So it looks like you can be better with JavaScript, you can probably find a sample on the web that is already in Portuguese instead of trying to map English-> Portuguese.

• Custom settings does not? Black screen!

  After doing windows updates and reboot my laptop, it allows me to connect, but instead to load my desktop screen, it turns just black. A small box will appear that says "custom settings (not answer) ' I'm lost. What is the problem and how to fix it?

  A small box will appear that says "custom settings (not answer).

  Interesting.   The part 'black screen' of your symptom could mean that explorer.exe has crashed and not able to restart.   I don't know why you might then see this second symptom, except that it sounds like something that could be a part of the explorer.exe recovery procedure, for example it reminds me of a procedure that automatically never came to be reviewed when W8 was first installed.

  In any case, even if you have a black screen, you can try to start the Task Manager and use it to start other things.   First of all, it would be useful to make a difference on the issue of whether you have a 'black' screen or a 'screen '.   For example if there is a fringe of light around the edges and it's just quite dark, but not as dark as it would be if turned off, screen "in white" could be a more accurate description.   Then you might be able to see things if they were added, which would be less likely, if she was black.   For example, you can move your mouse and see a pointer moves on the dark?   So I think this would be an example of a screen "empty."

  And then, to start the Task Manager press Ctrl + Alt + Del and the use of the Task Manager item in the menu hotkey to rise.   You can then use its Prcesses tab to see if the Windows Explorer appeared there.   If you can use the TM file, do not run... command to start typing here: explorer.exe

  However, another possibility that some people have been able to see is their primary screen inexplicably switched to a second monitor ghost.   Then pressing Win - P, CursorUp and Enter to try to change the setting of the Second screen can be a procedure simpler and more effective to try to get something on the monitor that you are watching.

  FYI

  Robert Aldwinckle
  ---

• Binding settings does not work properly

  Hello
  I installed the ODT with ODA (ODTwithODAC1110720) in my Windows developer environment.
  
  I have a .NET 2008, using the Oracle.DataAccess library project, v2.0.50727.
  
  I need to call a PL/SQL function developed in Oracle 11.1.0.6.
  
  This is the c# function I wrote to insert a record (through the PL/SQL function):
  
  Public Shared Function InsertContact (OracleConnection conn, string in_id_user, string in_i_type_contact, string in_priority, string iv_contact, string iv_note)
  {
  StringBuilder sbSQL = new StringBuilder();
  sbSQL.Append ("declare");
  sbSQL.Append ('id_contact number ;");
  sbSQL.Append ('start');
  sbSQL.Append (": id_contact: = pk_contact.insert_record (" ");")
  sbSQL.Append (": in_id_user");
  sbSQL.Append (",: in_i_type_contact" "");
  sbSQL.Append (",: in_priority" "");
  sbSQL.Append (",: iv_contact" "");
  sbSQL.Append (",: iv_note" "");
  sbSQL.Append (""); ");
  sbSQL.Append ("end");
  
  Oracle.DataAccess.Client.OracleCommand cmd is conn. CreateCommand();
  cmd.CommandText = sbSQL.ToString ();
  
  cmd. Parameters.Add ("in_id_user", OracleDbType.Int32). Value = "265";
  cmd. Parameters.Add ("in_i_type_contact", OracleDbType.Int32). Value = "1";
  cmd. Parameters.Add ("in_priority", OracleDbType.Int32). Value = Convert.DBNull;
  cmd. Parameters.Add ("iv_contact", OracleDbType.Int32). Value = "348".
  cmd. Parameters.Add ("iv_note", OracleDbType.Varchar2). Value = Convert.DBNull;
  Parameters.Add ("id_contact", OracleDbType.Int32, ParameterDirection.ReturnValue) cmd;
  
  cmd. ExecuteScalar();
  
  Return the new id_user
  back to cmd. Parameters ["id_contact"]. Celsius.ToString;
  }
  
  It was working fine when I used the System.Data.OracleClient library (I used instead of OracleDbType DbType and number instead of Int32 and Varchar instead of Varchar2).
  However, it seems that the settings are not related, the PL/SQL functionreceives all NULL.
  
  What I am doing wrong?
  
  Thanks in advance,
  Samuel

  Hello

  You did not provide the interface of the PLSQL procedure, but it looks like you have a problem, because the ReturnValue parameter is currently added last and must come first. Default ODP link by Position, so ned settings to add in the order declared in the statement. There is also a cmd. BindByName property, you can set to true if you want to change the default behavior.

  Also, not that it's illegal or anyting, but you don't really need to go through the trouble to create your own anonymous block to call the proc. You can assign to just

  cmd.CommandText = "pk_contact.insert_record"
  cmd.CommandType = CommandType.StoredProcedure
  

  and then the parameters in the correct order (again, returnvalue is added first).

  It will be useful,
  Greg

  Published by: gdarling on July 7, 2010 09:16
  Also note that the ODP forum would be more appropriate for future questions ODP and is located at ODP.NET

• The scanner on my Lexmark X 2480 all-in-one does not work, is it a driver problem?

  Scanner on my all in one system will not work, all in a single system is a Lexmark X 2480 printer does not scan.

  Original title: driver problem

  Search for the latest drivers from the manufacturer's website.

  Support and downloads Lexmark
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480#1

  Is this the same driver problem also posted you on here ?

• I can't go on the internet, and all my software does not work

  I was trying to install the Norton Internet Security 2011 and it took about three hours to remove the old one and it never installed a new. And after that, I tried to go on the internet and he claims that the msn.exec shortcut is not available and I had to go to search for, but I had no luck. My MSN, Internet Explorer, Safari, Google Chrome, and many other software (ie iTunes, Zune) who all worked before putting the disk of Norton, is no longer work. My daughter portable computer works very well, and the internet connection is still strong. I called Microsoft and they said that it has something to do with the IP address, it is a mistake. Someone knows how to fix this? Greatly appreciated, thanks!

  Hello

  ·         What version of Internet Explorer you are using?

  ·         This error message you receive when you try to access programs?

   

  You try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  For Internet Explorer, you can follow this link & check if the problem persists.

  Internet Explorer does not start or stops responding

  To remove the old version of the Norton antivirus, you can download & run the Norton removal tool to remove Norton completely from your machine. Then try to install Norton Internet Security 2011.

  Download and run the Norton removal tool to uninstall your Norton product

  You can also contact Norton support for assistance.

  Hope the helps of information.

  Please post back and we do know.

• Custom scripts does not work in Illustrator CC (2014)

  Some custom scripts that are part of my workflow do not work in the new CC; MultiExporter.jsx and Sprite CSS Generator.jsx.

  When I try to run is titled a modal window rises as if the script is running, but the actual window is only a few pixels maximum and cannot be resized.

  

  They have both worked very well in CC. My scope of javascript is pretty basic, but is there code that needs to be changed to update these to work with the current version?

  Thank you!

  Bob

  It seems that this could be a system issue or a conflict; I uninstalled CC2013 AI and AI CC2014 so clearing out all the prefs, artifact files and folders. Then did a fresh install of CC2014 it has been able to use all my scripts inherited without problem.

• HI how can I define clear history for a week or a month? All or nothing does not work for me. Thank you

  Advanced settings in the Privacy Options does not define how long I want my story to stay. Is this possible. ?
  History must be removed manually if I want to keep anything longer than when I close firefox, otherwise it crashes on everything until I do the manual delete. Any suggestions gratefully accepted.
  Thanks in advance

  Try this one instead and then: http://getsatisfaction.com/mozilla_messaging/