All files on Win10 could not install

Similar Questions

• When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  When I insert a compatible game must be installed and the alert arrives to allow another comes in and says "the file 'Localization.xml' could not be loaded."

  Hi Scarface0721,

  Welcome to Microsoft Answers Forums.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) game in which you try to read?

  (b) have you been able to install and play the game before?

  (c) you are trying to install the game to your computer from the disk or directly trying to play from the disc?

  Method 1:
  Try to install and play the game in a different computer.

  Method 2:
  Try another disc and verify if you are able to install the game.

  Method 3:
  You can also post your request in the following forums site.

  http://forums.gamesforwindows.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• Code error 0x7E - the file 'autorun.dll' could not be loaded or is damaged. Setup cannot continue. Windows 7 Upgrade installation problem

  I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).

  I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].

  The file 'autorun.dll' is present on the disk.

  I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.

  My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?

  Thank you.

  
  

  
  

  OK, so, this response is a little late to come, but if you never solved...

  I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.
  I hope this helps...

• "The file 'autorun.dll' could not be loaded or is corrupt.

  Original title: autorun.dll could not be found

  I'm trying to install Windows starter on my system (net accountant) currently using Windows 7 Ultimate edition.  It will not even start the process, which gives me the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Moreover, I found the file autorun.dll 'source' folder  However, the installation program is not see it.  It is a download, it's a Windows starter.iso file, I try to install the 32-bit version, I had antivirus in my system M.S Essentials, im trying to install from USB key no help?

  Hi Praveen,

   

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

   

  1. you are trying to install Windows 7 Starter on another partition?

  2. which type of installation you are trying to run?

  If you try to install Windows 7 Starter on the same drive where Windows 7 Ultimate is installed, then you must perform a clean installation.

  Follow the link for the reference below:

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Warning : Before installation, you must be prepared for the worst scenarios that led to your existing data on your computer being removed. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other storage devices before performing a clean install.

   

  I hope that the information above helps you.

   

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• The file... could not be opened. 10.11.4

  Hello

  just upgraded to 10.11.4. Everything works fine, but I discovered that I can't open any of my PDF files more. The file ' and if ' could not be opened. I can open these files with any other PDF reader, but...

  I really really want to like iBooks but this app is such a huge disappointment, and this version is no different. Why did they not hire someone who likes with it don't. iBooks is just pathetic!

  Thomas

  BTW, when I edited the post, I had to reselect the community. Why? Apple Software Quality feels more and more Microsoftish.

  A brief update here. After a few days the problem corrected itself. I opened iBooks and have downloaded all of the PDF files.

  Why wouldn't he download Collections created on the iPad to Mac?

• Vista - Error Code: 0X80070B7 (could not install Service Pack 2)

  Cannot install SP2. 0x80070b7 error code. Also can't install the system tool, but no error code.

  Automatic update of Windows attempted to load 4 updates recently, but an error message came up saying that it could not install SP2. The code was 0x80070b7. I tried to install SP1, in the case who had not worked for a long time, but the message is that the 'SP1 Setup is already running. I tried to install the tool of analysis, but all I get is a message saying KB947821 could not be installed. My computer still works until all this happened, and now it crashes after a few minutes of walking. It will be release after 20-30 minutes for a minute or two and then lock up again. Obviously, something happened in automatic installation and now the laptop is somewhere between facilities. I'm away for two weeks and are in desperate need of my computer. What can I do?

  Thank you

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 0x8007054F code: could not install SP3 for Windows XP

  original title: error 0x8007054F code: could not install SP3 for Windows XP because of the Filec:\windows\system32\drivers\acpi.sys being open or being used by another application. "Internal error."

  I tried to install Windows Service Pack 3 for Internet Explorer8. When you try to install this "priority" update, it begins the installation process, and then returns could not install Windows Service Pack 3 due c:\windows\system32\drivers\acpi.sys file is open or in use by another application. Internal error 0x8007054F. The only thing I have running in this case is the Internet (where I go to get the update) and the windows installation progress. What should I do to get past this problem? Please help me...

  Your loyal customer

  Hello

  
  To work on the issue, refer these methods
  
  Method 1:
  
  Read the following article.
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  
  Method 2:
  
  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384
  
  Registry warning:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
   
  See also,
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
   
  Hope the information is useful.

• Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

  Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

  I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

  Hi ameerlakhani,
   
  Try to save the scanned in a different file format and check if it helps fix the problem.
  Follow the steps in this article and check if it helps.
  Using the HP scan Diagnostic Utility
   
  If this is not enough, post your request in the support forum HP for assistance.
  Visit the following link to do the same thing:
  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/BD-p/scan

• Error code 0 x 80070002 Security Essentials could not install definition updates.

  I recently had to do a complete reinstall of Vista Ultimate and all programs, including Microsoft Security Essentials.  I now have frequent problems with not being able to update MS Security Essentials, receive the error Code 0 x 80070002:

  "Security Essentials could not install the definition update"

  I was not successful in finding a valid explanation, seeking only those that relate to the backup or restore issues, does not update of virus definitions.  Suggestions?  I followed the instructions for restart Windows Update, etc., nothing helped.

  Hi RGKoelling,

  Sorry to hear about the issue. Given that the advice given you did help, I suggest you to ask your question in the forums of Microsoft Security Essentials.

  Thank you!

• Windows Live Essentials 2011 programs could not install error: 0 x 80096010

  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  SOLVED.
  I was right. The wlsetup - web.exe 1 MB file has been corrupted (or disliked my 3 pc at least). I downloaded the full stand-alone 210 mb file from this link and installed without problem. Now works.
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++

  Hello

  Live Mesh Beta is gone, I downloaded Windows Live Essentials. I got this error.

  Windows Live Essentials 2011 could not install programs.
  An unknown error has occurred. Error: 0 x 80096010
  Help items that are suggested here did not help
  http://screencast.com/t/gFNdolVBeik.

  It happens on my PC and laptop. I uninstalled both Live Mesh, but no change. I removed the other Windows Live from the PC programs. Laptop doesn't have these. Still no change.
  Both running Vista Home 32-bit.

  SOLVED.
  I was right. The wlsetup - web.exe 1 MB file has been corrupted (or disliked my 3 pc at least). I downloaded the full stand-alone 210 mb file from this link and installed without problem. Work now after a lost day. Your time also.

  Thanks for your efforts.

  Sidenote: MS should really give a possibility to download the full file rather than download 210 mb on each computer.

• Could not install Jdeveloper 11.1.1.7 in a middleware House where Standalone WLS 10.3.6 is installed

  Hello world

  I faced a scenario where - I could not install Jdeveloper 11.1.1.7 (I mean 11.1.1.7 JDeveloper and ADF 11.1.1.7 lasting not) in a House of middleware in which Standalone WLS 10.3.6 has already been installed. It says ' the maintenance level produces the current Installer (Weblogic Server: 10.3.5.0) is not compatible with the level of maintenance of the product on your system (Weblogic Server: 10.3.6.0).» Pleae get a compatible installer or perform maintenance on your system to achieve the desired level". The reason why I need JDeveloper to be installed under the roof of middleware is because I have a build file that calls ojdeploy which generates the .ear file.

  Someone can let me know if one confronts this scenario or is there any stage of work around this scenario

  Concerning

  V. Praveen

  Hi kdario,

  I am able to solve it in a slightly different way. Not sure if this is common sense since oracle has certified the JDeveloper with WLS 10.3.6 11.1.1.7 combinaisondes.

  What I did is I created an another home for JDeveloper 11.1.1.7 middleware. Creates a path environment variable in the physical server to point to the/jdeveloper/jdev/bin of

  Now, I am able to create and deploy on the same physical server with Jenkins.

  A special thanks to kdario for pointing the finger a different direction.

  Kind regards

  V. Praveen

• «The video add-on drive could not install: impossible to validate the license online.» How can it help me? I tried the Extension handles CC too. But no success.

  «The video add-on drive could not install: impossible to validate the license online.» How can it help me? I tried the Extension handles CC too. But no success.

  This error indicates usually that one of the following problems:

  • You are not connected to Creative CC Cloud Desktop App and/or Adobe site with the same Adobe ID modules.
  • More than one user is logged in your Adobe software on your computer using an Adobe ID different from yourself, or indeed you have more than one Adobe ID that you used to connect to and the license file is damaged.
  • You are behind a firewall that blocks our license server calls.

  Please first make sure that you are connected to the Adobe website modules (top-right) and the desktop application CC (high button on the page of good settings, preferences, account) with the correct ID. If you are, then next steps are please uninstall and reinstall the extensions, reset between Manager.

• Developer SQL won't start could not install some modules

  I just installed the Java JDK and JRE 7u51 7u51. After that I extracted SQL Developer to a fresh directory. When I open SQL Developer, I get the following error message:

  Warning - could not install some modules:

  JDeveloper/NetBeans bridge - module named oracle.ide was needed and not found.

  Cache - module named oracle.javaxide extensions was needed and not found.

  Cache - module named oracle.ide extensions was needed and not found.

  Actions - the module named oracle.javatools bridge was needed and not found.

  Actions - the module named oracle.ide bridge was needed and not found.

  No idea why I get this message? I installed it on my laptop without a problem.

  Yes, I was going to suggest trying to hook the zip files - directory fees/empty of course.