All-in - One C7180 scan problems

Similar Questions

• B1110 HP all in one printer sc: PROBLEMS SCANNING ON MY HP B1110 ALL in ONE PRINTER AS SETUP NEW PC WINDOWS 8.1

  Since the installation of my new pc windows 8 my hp b110 all-in-one printer not scan and when the bottom lines of the text of my printing pages are cut and do not print

  Hi year54,

  Welcome to the HP Forums.

  I see that you are having some printing problems.

  I wasn't able to find the model of the printer you are using.  If I can better help you, please respond with your printer model number:
  How can I find my model number?

  Thanks for your time.

  See you soon,.

• HP5643: HP 5643 All in One - how scan you multiple pages

  I can scan my wireless printer unique pages, but for the life of me I can't understand how to scan multiple pages.   I read the other posts on other threads on by clicking on the sign (+) sign to the left of the display after scanning one page, but I don't have a (+) sign to click on.  Someone has this model of printer, that can help me?    Thanks in advance for your help.

  In addition, any way to speed up the scanning process?     My old printer could easily scan a 10 page document in time, that it takes to scan a single page.

  @TXXpress

  Assuming for now your printer to provide the "Document Scan" and the little "+" feature, you don't have to have the "Preview Scan" selected.

  See:

  Scan_Multiple_Documents-combined

  If all else fails, you can try to use a different program to scan multiple pages into a single document.

  Options of the digitization program

  I don't have the same printer model - I can't comment properly on scan "slow".

  • In general, the printers to "do a bit of everything" cheaper still not 'all' as well as more expensive printers, a full service.

  Other things that could cause a "slower than ideal: sweep

  • Wireless, if they are available and used to connect the printer, may cause slow response - which can be attributed to anything between a bad router and a bad signal for a slow wireless card in the printer or the computer.  The answer "slower than snail" may be caused by the network is too busy with other wireless / network diagram.

  Finally, the "so slow I want to die" may be caused by the printing software - programs sometimes even 'good' can develop problems just hanging out on the computer for awhile.  You can remove the program from the printer and then replace it with a new copy of the software service Support full page for the Web site of your printer.

  Printer: printer e-all-in-one HP ENVY 5643

  Full software features:

  File name: EN5640_117.exe

• HP Envy 4500 e-all-in-one Seri: scanning multipe pages in a document file

  I'm trying to scan multiple pages in a document file. I am currently using Windows 10. What are the steps to do this successfully.

  Hello

  Thank you for using the forum.

  To use the Scan software on your printer, you will need to download and install the printer driver.

  We recommend that you download the full features and it can be found here:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have installed the software, you can click the icon for the printer on the desktop and it will bring up the HP Printer Wizard and you can use the Scan software.

  You will first need to scan more than one page, select "Save as PDF".

  Once you've scanned the first page, in order to scan several pages, you will need to click on 'Add page' (as shown)

  

  When you are finished, you can save the document.

  Here are several videos giving you good advice on digitization (printers in the videos are using the same software to Scan as your HP Envy 4500)

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• 6520 HP all-in-one: PRINT SCAN to PC

  New PC (HP Pavilion); print wireless without problem, but cannot scan the docs from the printer to the PC. Can someone help me? The printer is a HP photosmart 6520. Thank you!

  Hi MaryW,

  Try following the steps described in this document.  http://support.HP.com/us-en/product/HP-Photosmart-6520-e-all-in-one-printer-series/5169038/model/5169040/document/c03478505/

  It offers several different methods of scanning.

  If you are still having trouble post back with the details and I'll try to help!
  Jean

• HP all-in-one d110a: scanning

  I've never been able to scan to computer on my HP d110a all-in-one printer.  I went through the instructions on your page to support many times - including uninstalling and reinstalling the software on your Web site.  I used the normally and scan doctor - it keeps telling me that it cannot determine the problem.  Any ideas?

  Hello there @gmom68!

  Thanks for posting on the HP Forums!

  I should be able to lend a hand with the scan of the computer.  How your printer is connected to the computer?  Is the printer connected wireless or USB.  If the printer is connected wireless, try plugging the USB just to see if it can be interpreted in this way.  You can also test scan using Microsoft Paint.  Just open the Paint on the computer, press the file icon in the upper left corner of the window and press "of the scanner or digital camera.  Select your scanner and see if it works.

  If the printer is connected wireless then the analysis part could be blocked by a firewall in the Windows operating system.  I recommend to download HP Print and Scan Doctor again.  With printing and scanning doctor, you can temporarily disable the firewall that may block the printer from the computer. If the printer is found, you need to turn your firewall on back to make sure that your computer is blocked.

  To download the print and the doctor Scan click here: print and Scan Doctor

  To temporarily turn off the firewall:

  1. Download and open the Print and Scan Doctor
  2. Click on 'Network' at the top of the window
  3. Click on 'firewall troubleshooting. "
  4. Select the firewall and disable

  Launch the software HP again to see if the printer is located.  If the printer is not found, then you want to communicate with your provider of firewall while allowing access to the printer to the computer.

  

  To turn on the firewall:

  1. Open the print and Scan Doctor
  2. Click on 'Network' at the top of the window
  3. Click on 'firewall troubleshooting. "
  4. Select the firewall and select

  If please, after back and let me know how it goes!

• HP 5610 all-in-one printer: printing problems from the internet

  my printer Hp 5610 all in one printer don't print properly on the internet, bold text is readable, any type is barely legible, and in some cases, unreadable. I have downloaded and run the hp print and scan doctor and followed touble shooting recommended changing usb ports and a different cable that has not solved the problem. The drivers have been updated and installed. The printer works well when you print files. I also changed ethernet cable which had no effect. I deleted and reinstalled the printer several times and still no results. I noticed this problem in the forums with different printers and systems, but I have seen no resolution for any of them. I'm open to suggestions to solve this problem.

  Hi @mikiev,

  Welcome to the HP Forums!

  I see that you experience printing problems when you print from the Internet, with your HP Officejet 5610 on Windows Vista. I'm happy to help you with this printing problem!

  A few questions for you, if you don't mind:

  • What is the name of the web browser that you use to print from?
  • What happens when you print from Notepad? You get the same quality print or better?

  In the meantime, I suggest go through this guide, Faded or dull in print colors. Also, I would suggest trying to print from another web browser. Such as: Firefoxor Google Chrome, etc.

  Thank you for posting!

• HP Envy 4500 All in one printe: copy problems HP Envy 4500

  The printer works well, but I can't do on my envy of 4500 copies.  When I press the 'Start copy black' or 'Start copy color' nothing happens.  I just replaced two cartridges with HP ink cartridges.  The scanner doesn't work well anymore.

  Hello

  Such a most likely occurs as a result of a problem with the scanning hardware.

  Follow these steps to solve this:

  http://support.HP.com/us-en/document/c00587971

  If the product of the repairs are needed to fill this form to contact HP support, be sure to select your region by clicking on the country of change:

  https://support.HP.com/us-en/contact-HP/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876

  Shlomi

• HP Deskjet 3070 (All-in-one/Wireless) install problem Win 7 64

  Hello world

  I wonder if others have had similar problems or ideas on the underside, surely I can't be the only one to use this installation/suffering with this problem.

  Printers: HP Deskjet 3070 All in One (USB/Wifi)

  Operating systems: Windows 7 64-bit (installed absolutely fine on Win 7 32 bit laptop computer connected via wifi).

  Setup: - a Homehub BT, providing WiFi for laptop (Win7 32 bit), a desktop computer (WinXP SP3), the printer has an IP address, which is visible on the home network map - it has a MAC address also. My PC: connected by Ethernet to the homehub which is currently running wifi for all of the foregoing.

  Drivers using downloaded: -.

  + Computer laptop Win 7 32 bits connected via WiFi to the Homehub - installed fine, found printer - this is the stage where the printer receives a configuration intial IP address / completed.

  + WinXP SP3 connected through WiFi to Homhub - as above, correct, opportunity driver found the printer (which, at this time already, there).

  If the printer exists within the network, other computers can see / use it.

  ++ My PC: Win 7 64 bit connected by ETHERNET to Homehub (she does not and will not have a wireless option).

  Downloaded the drivers to install HP. (later tried "Run as Administrator"), select the software components (i.e. Remove feedback/coupons etc), installs OK applications, next step is the configuration of the printer. Add a new printer. "Check network" window appears with the message "Checking network environment" bar and the State. The status bar springs upward but stops dead at the filled Stadium. No possibility to choose whatever it, pressing Cancel has no effect. End of task here generates an error of 'work '. 'devicesetup.exe' stopped The installer never ends, applications are installed, but at no time, it shows the printer/selection.

  I tried many things: complete uninstall "engines", which in this case seem to be the only applications, ensure that all non-essential startup items are disabled, make sure that the firewall is DISABLED (just to be sure), ensure that the anti-virus is disabled there is, in fact, no other printer installed (this computer never had a printer attached to it) make sure file sharing and printing are powered, ensure that there is no TCP/IP/ports printers mapped etc... Still the same error, old or new drivers, always the same - installation does not complete.

  All the doctor diagnostic tools/printing tell me I have to install the driver software (I agree) but direct me to the HP site to download the ones I already have.

  I can't enter the Server Web integrated (the PC where I can't install the drivers, or one of the 2 PC's who have installed correctly). One of them if I click on networking or wireless or advanced it warns a HTTPS connection and then fails with "internal server error".

  My questions to someone kind enough to read this wall of text: -.

  + Anyone has any ideas please? I would prefer not to return the printer as defective because it seems to be a good all-rounder and it works for 2 other PCs in the House, its just mine which does not connect! Sad...

  I'll try the USB installation and then removing the USB-> wireless to see if that can help. I had previously seen articles where people offer to buy a router to 3rd party like that is basically a wifi pass through broadcaster. It is not for me thanks

  Thank you all for reading at least, it's now corrected with slightly reduced functionality.

  Install the USB printer, then DO NOT convert into wireless via HP drivers/installation.

  Change the USB to a TCP/IP port port newly created under the control panel of the printer (windows 7), enter the IP manually to the printer - you want an IP address that will change not in order to make this work - forcing the Home Hub to never provide that the same IP unique to this particular device was the easiest way for me. This connected but showed as offline printer constantly, others may have different experiences.

  To fix that (for me): -.

  Installing the printer in Control Panel Goto, force reinstall drivers HP ("via the drive"). Make sure that all the old files are overwritten. Turn the printer and then turn on (power button - twice if in mode "standby" to disable). Wait until the wireless light will stop flashing and become solid blue. Check in Control Panel if the status is online, if so you are good to go

  As a result of this sabotage, you lose the feature advanced scan for PC etc etc, but the real impression seems to be absolutely perfect. The printer is always available to everyone on the network, etc.

  Good luck to all.

  Alex

• Photosmart C6188 all-in-one not scan on the mac with OS 10.6.1

  I just bought a new mac with snow leopard and incapable of having the C6188 HP photosmart all in one analysis images on mac.

  I made the mistake of installing the original software which is come with the printer, and then discovered that it does not get. So I uninstalled the software and performed an update to the Apple software.

  I tried according to your publications/announcement about the leopard snow, preferably using system preferences and applications of image capture.  I can print all right, but unable to scan images on mac.  I get the error message is ' year error occurred while communicating with the scanner.  It's the same message that I get from all three applications (preferably, preferences system and capture image).

  A big thank you to all who can help...

  I'm glad it's working for you now.  Multiple page in one file is a driver problem.  Sorry, you will need to wait for an update.

  In the meantime, it is very easy to combine pages in a file (pdf) with preview.

• Photosmart 5510 all-in-one: chromebook, scanning, multiple pages

  Several pages on a chromebook scanning is not possible, it seems. I use webscan but installation that only allows you to save a page at a time. I then use PDF love to combine the files, and although it works well there must be an easier way. Is there another brand or model All In ONE that will make a go?

  Hello Automec,
  
  Welcome to the Forums of HP Support!

  I see that you are looking for a more easy why scan multiple page. PDF with the 5510 and a Chromebook. The way you do it is the best, because the Chromebook isn't any software which can be installed for the printer. Here I had a way, but if you find one, let me know.

• ENVY5530 e-all-in-one: still some problems with my printer ENVY5530

  My ENVY5530 at the age of one month all the in a has problems.  Firstly, it has not feed paper, then a HP Tec, I help and then it worked fine for a few weeks.   Later, same problem returned, paper does not feed, and now, I still have a new problem.  The document is printed, but the top is folded and torn.   However, from time to time, once a page prints perfectly and I am hopeful, but then the mistakes to come immediately.  I reinstalled, but the book looks always up before it feeds through. It is as if it is to be caught by something while it passes through.  Now of course the store (Best Buy) not exchange it because I went over the allocated period of 15 days.  Of course, I thought it was working fine up until 15 days have expired.  The most irritating thing is well, I can't count on it, what problem there at that time?  Maybe tomorrow it will work perfectly again.  Y at - it something I am doing wrong?  Has anyone else encountered this problem with the top of the paper coming out mutilated?  If I can't understand this point I'll have to return under warranty, HP will repair or send me a replacement.  But I would rather by this argument.  Thank you

  Hi Laylac,

  Thank you for your answer!

  I am pleased that the solution is an easy solution for you!

  Please consider tagging 2 Message like "Accept as Solution" so that someone else in the community who may encounter this problem can more easily find the solution.

  Best regards!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Photosmart C4280 all-in-one no scan

  Although my printer works fine for printing and copying, I get error messages when I try to scan by pressing the button or by using the HP software

  I use the HP Photosmart C4280 all-in-one with a MacBook OSX 10.5.7 running

  I connect to the printer with a USB cable and have used the two USB ports to make sure that this isn't a wobbly port.

  When I push the scan from the printer button, HPScan starts, then an error message is displayed: The HP Communications Application does not run.
  When I run ScanPro the following error message: Sorry, scanner could not be initialized.

  I already downloaded and installed the latest printer driver.

  Any help would be greatly appreciated. My latest project continues upward while I try to scan to run.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP ENVY 5530 All in One: what "Scan by means of the computer?"

  I use Windows 10, 64-bit and I have a wireless hp envy 5530 all in one printer on my network.

  I do not understand what "Scan to Computer" means... does that mean I can scan a web page and send it to my computer, it means scan a document and send it to my computer or that mean both?

  Thank you

  Dino

  Hello

  Thank you for using the HP Forums.

  Scan of the computer means "scan a document and send it to my computer.

  You will need to install the FULL features software and activate it before you can use.

  How to scan to computer

  Once you have installed the software:

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3 make sure you have "Enable" Scan of the computer. Also, make sure that the tab "automatically start Scan of the computer when I connect Windows" is checked if you want to perpetuate this feature. (the following video will show you how)

  Scan to computer

  Hope that helps!

• How can 7520 all-in-one, I scan to a pdf file?

  I just got a 7520 all-in-one and want to scan documents to pdf format, but the only choices I'm given are all images. I'm doing something wrong?

  hstn9,

  Welcome to the Forum of discussion Forum HP printer.

  Install the Photosmart software 7520 full functionality on your computer to the printer.

  General instructions to install the printer software

  • Open drivers HP & downloads
  • Enter your printer model information
  • Select your printer in the list of the 'results '.
  • Enter your operating system from the menu drop-down
  • Click NEXT and scroll down
  • Find the category driver - software product installation
  • Select the base driver, e-print, or a full features software
  • Save the *.exe installation package (s) on your computer

  The files will probably save in the "folder"downloads. "

  Next:

  • If it is available, you can download print and scan doctor and / or other programs of the category-utilities

  TIP:

  Install the utilities / tools first. bit installation packages are smaller in size

  ·

  • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

  NOTES:

  ·  On the bottom half of the main Web page for your printer, you can find useful to help with the installation videos.

  ·  Scroll through the list of videos back until you find the video that best fits your situation.

  ·         If you use a USB connection: download and install the driver software before connecting a USB cable.

  ·         Ethernet: If the printer supports Ethernet, you can connect the printer to the network (and assign the printer an IP address for the router, if you wish).  Once the printer is connected to the network, make sure that the printer is turned on, and then install the printer software.

  • Once the initial installation is complete and functional, don't forget to check and install the relevant updates - check the category - updated

  There is valuable information about the Web site, including manuals, how-to pages and alerts for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Start the wizard printer (program for the centre of alternatives):

  Windows key + R (open the command run) >

  Paste this line:

  'C:\Program HP HP Photosmart 7520 7520 Photosmart series.exe series\Bin\HP' - UDCDevicePage to start

  Opens the Printer Wizard > select "scan a Photo Document or ' > select 'Scan to File."

  The chart in the example:

  

  At the bottom of the "HP Scan" menu, you'd like to put in place a shortcut customized for your scan options - the shortcut contains the parameters for the analysis you select and then appear at the bottom of the list of available scan options.

  Create Shortcut Wizard for the printer on your desktop:

  • Right click on a clear view of your desktop > new > shortcut
  • Select the location (command) for your new shortcut:

  'C:\Program HP HP Photosmart 7520 7520 Photosmart series.exe series\Bin\HP' - UDCDevicePage to start

  • Type a name for the shortcut, for example, 7520 Assistant

  NOTES:

  -Argument from the beginning at the end of the command line keeps the wizard from the ePrint on your browser Web page.

  Once the new shortcut is created, you can right click on it > properties > change icon

  When you select "Change icon" you might see an error message indicating there is no icon for the shortcut - continue on and select from your personal collection or choose an icon from those provided by the system.

  ==========================================================================================

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.