All my shortcuts go to the same program and they all have the extension .lnk.

When I look at the table of file extensions, I see a prticular program indicated, and this program is the program that starts when I click any shortcut.  I see no way to change this so that when I click on Internet Explorer, for example, Internet Explorer sometimes instead of the wrong program.

Hi Mensard1,

I had the same problem. I solved it by downloading http://www.creativelement.com/powertools/ and then running the program (from the directory, because none of my shortcuts working) "file Type doctor." When I chose ".lnk" in the list of extensions, he said in the Actions in the right click Menu:
"(ignorer le choix utilisateur) ' in red and"
"Open".
I then removed the "(utilisateur choix override) ' and that's it." All shortcuts worked once again, just as they did.
Good luck
Maikel

Tags: Windows

Similar Questions

  • All programs have an extension .lnk instead of the extension which actually would allow me to open the program itself.

    Original title: Start Menu, all programs

    I don't know how but my Start menu, all programs have an extension .lnk instead of the extension which actually would allow me to open the program itself.  Don't know how it happened but I have been looking for a solution for more than a year now, and I'm not about to find an answer.  Don't know what to short to bring it to Best Buy and watch it with a geek.  Can someone point me in the right direction and tell me how to get the menu start original, all programs back to the way they should be?  Thank you

    The start menu (including all the components of the menu in all programs) are generally shortened. LNK files. It is hard to tell from your description, but you can experience a bad file association with the. LNK shortcuts. Take a look at the following article of the local and my solution to see if it fits your situation.

    Can someone tell me please how to fix programs icon who turned into VLC player?

  • If I have 64-bit and 32-bit on the same computer, do I have access to the same programs and data?

    Currently, my system is Windows 7 64 bit with 8 GB of RAM. I know that the 32-bit version can use only 2 GB but it runs on a computer that has more, right? Assuming I'm right about that, if I install both, should I rate the same programs and data?

    You can install the two operating systems on a player, but you must create a separate partition for one of them.
    You can share data, but not the programs that each application must be installed in each version.
    That said, I see no benefit in the same version of Windows, but with different pieces of dual-boot. Why would you do?

  • What is the difference in verses apps for each of the programs to purchase and download it?  They are the same thing and they are simply called "apps"?  Are the applications of complete programs?

    What is the difference in verses apps for each of the programs to purchase and download it?  They are the same thing and they are simply called "apps"?  Are the applications of complete programs?

    Yes.

    Adobe uses confusion of terminology in their efforts to explain things.

    Cloud desktop applications are the same as the purchase of the software on disk in the days avant-nuage. for example, the Photoshop Cloud desktop application is the full version of Photoshop CC 2015.

  • sony bravia kdl 40ex725 TV, I see double image in the screen of the same program and image

    sony bravia kdl 40ex725 TV, I see double image on the screen of the same program and that the distortion of the image

    Looks like a 3d picture? Side by side?

  • I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

    I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

    For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

    As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

    The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

    Get them here: download Acrobat 7 and CS2 products

  • cancel the file association for the extension .lnk to original setting

    all the hits (shortcuts) now have the extension .lnk wasw here before I have had a crash.

    If you want to attach the file to the original associations, look here:

    'Windows XP file Association problems'
      <>http://www.dougknox.com/XP/file_assoc.htm >

    HTH,
    JW

  • How to recover programs and files that have been written too by a full system restore?

    Original title: data recovery

    Is there a program that will allow me to recover programs and files that have been written too by a full system restore?  I had to do a complete system restore, because the computer has been locked up in a start of the closed loop cycle.

    Hi Apmech9,

    1. don't you restore the computer to factory settings?
    2. do you just restore the computer to an earlier time by using the system restore feature in Windows XP?

    If you restore the computer to its factory settings, you will then get in touch with the manufacturer of the system for more support options.

    If you had just restored the computer to an earlier time using System Restore, you can undo the system restore to revert back the changes.
    See the article "How to undo a restoration of the system after performing a system restore" in this article of the

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • All the icons and files with the extension .lnk and error message: "Windows cannot open these files.

    Original title: STUCK IN. LNK ??????????????????????????????????????????????????????????????

    all my icons turned into extensions of file and state that "windows is unable to open these files. I can't search the Web for a fix, because it downloads as a .lnk I can't open as well?

    Hi MarcSatz,
     
    -Did you change on your computer before this problem?
     
    This problem occurs when one or more of the following conditions are met:
    • The registry values that are associated with the file name extension are corrupted or missing values.
    • The computer is infected with a virus.

    Here is an article that will guide you in the process of fixing the issue:

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

     

    Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

  • I paid fo the program and he said have been downloaded, but I don't see it on my desktop.  Where would it be?

    Does anyone know of a question like that?  Don't know how to fix

    For downloads, check with the download folder.

    Windows: Press Ctrl + J the two together, it will open the list of downloads.

    Mac: Finder > GO > downloads.

    Installation locations:

    Windows:

    C: > Program Files > Adobe

    C: > Program (x 86) > Adobe.

    Mac:

    Applications folder.

  • Oops - I uninstalled a few programs and now I have no sound

    OK - I feel really stupid, and after several hours of trying to fix it myself I feel even more stupid.

    A couple of days, I decided to remove some programs on my computer that it seemed that I didn't need. I deleted 2 or 3 - everything the computer I said "rarely used". I thought I might as well get rid of a few things that might slow me down. And no, I don't remember the names of those that I deleted.

    Now - a few days later I noticed I have no sound - not the startup music, no itunes, no sound with video. Nothing. All my strings are tight and my speakers are on. I tried to reset my computer to a week ago, but he said that there are no changes. I went a month ago and he said the same. In the meantime, the message of itunes is "Itunes has detected a problem in your audio configuration, playback audio/visual does not work correctly.  In Control Panel, I went to 'Sounds, speech and audio devices - the volume' and it shows just "no audio device." I went through the troubleshooting steps and he told me to go to-control panel, printers, and other devices and then add material - but it don't tell me what to add. Frustrated!

    I know I messed up something good enough, but it seems that I should be able to reinstall what I uninstalled. I don't know what it is!

    A few directions step by step on how to get back my sound would be very appreciated!

    Simply go to the site of the manufacturer of your PC/computer laptop, find the support page for your machine, then download and install the latest audio drivers XP.

    See you soon,.
    Jerry
  • I installed microsoft visual C ++ 2005 service package redistributable pack 1 (kb2538242) 16 times, each time as this same kb2538242 and now I have just again now, it wants to install this update

    This is the problem that I have been, so it's my title...

    You're not alone:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/kb2538242-Visual-c-Redistributable-Update-on-June/ba0b6202-c775-4D64-9fd2-21adc49f6e73

  • Windows in Windows 7 easy transfer is transferred programs and files and folders

    I want to get a new motherboard and processor, but because my Win 7 license is OEM, I have to get another Win 7 disk to replace the operating system on the hard drive, I watched the Windows Easy Transfer tool, but I'm not sure if I will lose programs, if that's the case then I'll upgrade not as some programs are very valuable for me and too expensive to replace I don't want to format the drive only to find out that the programs are sunk, I'll put up with the monitor sometimes not detected at startup upward.

    See you soon.
    Wilf

    To repeat, the drivers are obtained from your PC to the support site, in the case of a brand PC, or the manufacturer of the motherboard in the case of a generic desktop computer.

    Using the Device Manager will update the drivers from windows update, which is not the same thing, and they may have the functionality of the drivers of real equipment manufacturers

    MSE of MS is free

    http://Windows.Microsoft.com/en-GB/Windows/Security-Essentials-download

  • It cannot open any programs they all have the same icon on the desktop and start programs... why?

    All of the icons on the desktop and on the start menu have the same icon and will not open... I have new sony computer with windows 7... I tried to move music to a file to burn a cd, he asked what program I should use to open them have all records have the same program and open the habit... I don't run a virus, malware, none of the infected files.

    Hello

    You did changes to the computer before the show?

    Method 1
    I suggest you try the steps from the following link:

    When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
    http://support.Microsoft.com/kb/950505

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

    Method 2
    The issue could be due to the virus on the computer. I suggest you run virus scanner online by using the Microsoft safety scanner.

    Microsoft safety scanner
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  • How can I MOVE buttons on taskbar to a new location without having to close all programs and resume in the order I want?

    I like to keep the buttons in my taskbar has organized with the browser and messaging on the left, followed by Windows Explorer and other items. If they get out of order or programs are loaded into a different order, how can I MOVE the buttons to a new location without having to close all programs and resume in the order I want? In addition, sometimes, one of program buttons seems in itself to migrate out of place and I need to get back to where it should be: same problem.

    Hi shohareZohre

    Thank you for using the Microsoft Answers Forums!

    The task bar is the horizontal bar at the bottom of your screen time. In contrast to the office, which can get obscured by the windows on top of it, the taskbar are visible nearly all the time. It includes four main sections:

    ·         The Start button, which opens the start menu.

    ·         The Quick Launch bar, which allows you to start programs with a single click.

    ·         The middle section, which shows you what programs and documents you have open and allows you to quickly switch between them.

    ·         The notification area, which includes a clock and icons (small pictures) that communicate the status of certain programs and computer settings.

    Add or remove programs on the Quick Launch toolbar

    The Quick Launch toolbar is located on the task bar and is a convenient way to open programs. You can add or remove program icons in the Quick Launch toolbar so that you have easy access to the programs that you use frequently.

    To add a program icon to the Quick Launch toolbar

    Click the icon for the program to add (you can find most icons of programs on the start menu or the desktop) and then drag it to the Quick Launch toolbar.

    Note: If you don't see the toolbar tools quick launch, right-click on an empty area of the taskbar, click Toolbars, and then click quick launch.

     

    To remove a program to the Quick Launch toolbar icon

    Right-click on the icon of the program and then click Remove.

    Notes: ·         Delete an icon from the taskbar does not remove its corresponding computer program.

    ·         If you want to stop showing a toolbar on the taskbar, right-click an empty area of the taskbar, point to toolbars, and then click the item that you want to stop broadcasting.

    NOTE: The ability to move the programs in the taskbar is not possible in windows Vista but the same functionality is available in Windows 7. Please see the link below.

    http://www.Microsoft.com/Windows/Windows-7/features/Windows-taskbar.aspxand

    Check out these links for more information:

    http://support.Microsoft.com/default.aspx/KB/253679

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-programs-on-the-Quick-Launch-toolbar

    http://Windows.Microsoft.com/en-us/Windows-Vista/show-or-hide-icons-in-the-taskbar

    Hope this information was useful.

    Let me know if it worked.

    All the best!

    Thank you and best regards,

    R uma - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • How to access the channel values?

    I'm new to scripting language DIAdem.  I TDMS has a group and several channels with String type all.   How to read the first 4 characters of each string values and store into the new channel?  Example of data file attached. I tried for the statement

  • Using a MSP430 to control a H-bridge

    Hello I was assigned to a project to use a MSP430 microcontroller to program a PWM ranging from 0.2 to 0.9 to drive an H-bridge and use LabView to change the code. What I'm wanting to do, is create a VI that allows the user to control the range of nu

  • Aspire S7 - 391 problems Wifi

    I have nothing else problems with wifi on my S7-391. I installed the latest drivers on the site. My problem is Wifi works fine, once connected - but every time the laptop sleeps and wakes up - it may or may not reconnect. Help - this is really unacce

  • Pre 3 WebOS bugs

    I'm lucky enough to be the owner of a smartphone Pre 3 and, while I generally enjoy the experience, I've already fallen on what appears to be 2 bugs within a week or so to own the handset. 1. it is not possible to change the order of your contacts in

  • ADF security problem

    Scenario is,Im trying to implement safety WLS in ADF.I have prepared Data Source and security field everything is right, but still my app past but keep the page loading. I received below errororacle.adf.share.security.ADFSecurityRuntimeException: une