All of a sudden I'm having trouble getting a bank statement to come

Similar Questions

• Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless

  Bluetooth

  Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.

  Can not find the necessary drivers

  Hello

  1 have you tried matching the laptop and the wireless audio link?

  2. What is the number of the model of the laptop?

  Method 1:

  Follow the link below and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)

  I also suggest you to contact the manufacturer to get the required drivers for the device and install it.

  http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html

  http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/VI-VN/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps!

• Having trouble getting phone Motorola Razomax HD & Windows 7 PC to communicate via USB and DLNA

  Having trouble getting telephone & Windows 7 pc to communicate via USB and DLNA

  Original title: motorola razomax hd

  Hi Bill,

  You can read these articles and check if that helps.

  How can I use DLNA on my DROID RAZR MAXX HD HD? : https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/91160/p/30, 6720,8579/session/L3RpbWUvMTM2NjAzNjU0My9zaWQvV1NvZ2hObmw%3D

  Install a USB device: http://windows.microsoft.com/en-in/windows7/install-a-usb-device

  Stream your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-in/windows7/stream-your-media-to-devices-and-computers-using-windows-media-player

  For more help.

  https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/30, 6720, 8579/p_country_code/US

  Additional information.

  Play: frequently asked questions: http://windows.microsoft.com/en-in/windows7/play-to-frequently-asked-questions

  Response with the State of the question and we will be happy to offer you our help.

• Have a new Mac computer.  Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. Tried to download the CreativeCloud Installer, but still now working. How to make creative work Cloud

  Have a new Mac computer.  Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. I tried to download the installer of CreativeCloud but still does not work.

  How can I get Creative Cloud works on 2nd new computer please?

  Hello

  Please use the link below to completely remove the creative Cloud Desktop Application.

  Using creative cloud | Uninstall the creative cloud desktop application

  Hope this will help you.

  Kind regards

  Hervé Khare

• Having trouble getting on the internet

  Why is - this all of a sudden my computer can't go on the internet? I have to connect manually to the "network access 4 Local and Internet" whereas before I didn't have to? It took me a while to understand why I could not just first in the internet. I have Mozilla FireFox.

  Thank you

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  Method 1:

  Step 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Wi - Fi and in Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=tab04

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

• Having trouble getting first pro clips cut into compositions

  I'm working on a mashup of TV intro in the style of happy days to see the tv with another Publisher.  I'm a complete noob with sequelae.  I have never used before for anything.  The other editor has created the model in the after effects of the turntable with the player intros compositions in the center of the disk and sent the project.  He created a composition for every character intro and I'm trying to get in and replace the clips which he used as place holders with clips that I cut in first pro.

  As a first step, I managed by dragging the first pro sequence in the after effects project.  Then when I looked at the composition of the sequence, I could see the trimmed clips and could copy paste clips I wanted in their compositions respective intro.  I noticed the first time, I imported the sequence in AfterEffects and make the changes in first pro it updated in real-time.  Now all of a sudden the changes I made to the first pro sequence is more updated of sequels.  What's weird, it's update to the extent if I watch the sequence in after effects viewer I can see the changes, but on the scenario where the clips are arranged the changes are not reflected and it shows me a previous version of the sequence.

  So my two main questions are

  (1) how is the line time in legacy is no longer updated is the changes I make to the sequence in first pro?

  (2) what is the best way to get trimmed first pro clips in after effects compositions?

  Question 1:

  Since you're so new to AE, it is quite possible that a number of things that happened without realizing you it. This and you have given a lot of information for troubleshooting I mean, we don't know yet the raw versions you use, much less minor version numbers. (For example, we do not know if you use CC 2014, much less if you run the update 13.2 for AE or not.) Here is some info that we need to help: http://forums.adobe.com/thread/961743

  http://forums.Adobe.com/thread/961743

  Question 2:

  You can choose file > Import Premiere Pro Project and he'll bring the clips. It does not update, but it will give you the items you need in a way that is easier to deal with EI.

  Alternatively, you can choose to dynamically bind a first project (which resembles what you initially). In most cases, I prefer the first way.

  Since you have never used before AE, there will be a lot of things that frustrate you if you try to plow ahead without knowing the basics. I highly recommend you to go through the resources linked here: granted starting After Effects , there is a wide range of resources, but that's because EI is such a deep and complex program. Without a foundation in the basic principles, you just want to keep to be frustrated.

• Hi, having trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.

  Hi, I have trouble getting the installer of Creative Cloud 30 day trial to boot on my computer.  Here I did successfully about 3 days ago, but since then has picked up a virus.  I used system restore to restore my computer about 5 days, which was to remove the creative cloud and Photoshop.  Now I am trying to re - download creative cloud with no luck.  Any idea would be highly desirable. -Demian Arend

  Hello

  Sign out of your account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Having trouble getting Windows media player to recognize and extract some burned CD when I insert the CD, nothing comes up on the tab extract. I have licenses for all the protected songs and the same CD was ripped in the past by using media player.

  My computer has a virus and before I wiped it's own, I copied all my files to blank CD I was able to extract these CDs on my computer but they are in the WMA format and I want them in MP3 format. I changed the rip settings but when I put in the CD Ripper re - it, nothing comes tab extract. I tried to delete all the files in windows media player and my computer but media player doesn't always recognize the CD tab extract. I have restored my music files from the bin to WMA, but I really need to extract the songs in MP3 format. What can I do to get Windows to recognize and tear my CD? Any help is appreciated.

  Thank you!

  Make sure that there is no CD in the CD drive. Then, go to Options - confidentiality of WMP and click the button Clear the Caches . Restart WMP, and insert a CD you want to re - rip. Are you able to rip the CD now?

  If it still does not work, you can try to rip the CD from another user account (if necessary, create a new user account in the control panel). Afterwards, you can move the files ripped to MP3 to your own original account. Tim Baets
  http://www.BM-productions.TK

• Having trouble getting the voice VLAN on the switch X1052P to work at all

  Can someone help me understand how to set up the voice VLAN X1052P? I spent several hours trying to get this working and it does not work. I spent about 4 hours on the phone with a Dell technician that night and he couldn't get it to work and finally gave up. He told me that I had to spend my warranty to ProSupport because he did not know how to solve the problem. What group of *. It's a simple configuration of VLAN. What must be so picky about? In any case...

  Setting up the VIRTUAL LAN must be fairly simple, but apparently on this switch is not. The user guide page 406 is not very useful except explaining what the different options. I must admit I am not an expert VLAN so I dunno I've misconfigured something. But remember, Dell technology could not operate either.

  Here's my situation... I have VoIP phones on my network connected to a network wall jack. Connected to phones are my computers of users. The computer of the user and its respective VoIP phone, both share the same data cable. Before replacing Cisco managed Internet service provider spend all it worked well. The problem is that they had direct access to our network so I removed the switch and installed the X1052P in its place. I talked to the ISP to let them know what I'm doing and they said everything I had to do was setup VLAN ID: 15 for the voice VLAN because this is the VLAN ID that the router uses to route telephone traffic. Router PSI is also the server DHCP VLAN 15 and issues IP for phones using 172.27.0.0/24 with a DHCP 172.27.0.50 range - 150.

  I tried to configure the switch using parameters of VLAN static and settings VLAN voice and neither one also seems to do what I want it to do.

  Network administration > VLAN > VLAN static

  Network administration > VLAN > Voice VLAN

  I activated the profile 'phone' on ports I want to added to the voice VLAN and it does not work. Moreover, 47 the switch port is connected directly to the ISP router and is configured as a trunk with the default port VLAN 1 unidentified and tag VLAN 15. For other ports I tried the general implementation, access and trunk of the parameters on each port to see if I could get something going and still nothing happens. When I set up the ports as General ports VLAN, I made adding VLAN VLAN 1 and VLAN 15 as a VLAN tagged not marked. It still does not.

  This is the short story from where I am now. Any help is greatly appreciated.

  FYI, as a follow up I finally solved the problem. I hope this information helps someone else that can encounter the same problem.

  After buying the ProSupport warranty upgrade ($121 out-of-Pocket mind you) and addressing a total of 4 technicians ProSupport expert technician a 3rd another level (only available via chat message between one of the ProSupport phone technicians and the 3rd Tier expert tech - i.e. I couldn't talk or chat with this person me) the consensus was that the material must be bad. When I bought the X1052P I bought two of them, so the best way to know if it was a bad switch was simply configure the other switch and see if the behavior occurs on this one, too. Well, this switch also restarted each time I assigned the profile 'phone' to more than 13 or 14 ports in the switch. It seems that it was not a hardware problem after all.

  I went back to the switch original and tried new things hoping that I could fall on a solution and it turns out that the solution was NOT to use the voice VLAN on the switch. It does not work!

  SOLUTION: I set the VLAN ID: 15 manually and no has not assigned any phone profiles to one of the ports. This is how I solved the problem.

  So he has bad software on the switch. I tried to see if there are updates of the firmware on the Dell support site, but there is none. Configure manually the phone VLAN was the solution. What a freaking nightmare which turned out to be. Maybe someone in Dell could note this problem and test in-house. And, if you want to compensate me for the 20 + hours I spent working on this problem, which has be great, too.

• Having trouble getting internet access

  Hi guys... I have a dell laptop inspiron 5520... It's just 5 days... everything was fine with the internet is suddenly started showing no internet access to my wifi network... but it has network access... itsays that the modem is connected but no internet access...
  Gys help me... i have tried all my knowledge on the networks to clear it but every thing in vain... I sure u there is no problem with my modem...
  I use McAfree antivirus protection

  It is not your computer that's recently published Microsoft updates.  Mine did the same thing. I had to restore to a previous point and everything works as before.  I can't believe that Microsoft is actually telling people it's a problem with their computers when obviously this post proves how FALSE it is. Your computer is practically new!

  They will have to OWN up to their mistake and release a patch.

• Having trouble getting an Excel file table

  This will probably be a very stupid question, but I could hurt trying to get a table 2D from an Excel file? The file contains two columns of data that I want as a 2D array (or two tables 1 d) and after having tried a number of things I don't get anything up on top of my chart. The attached VI is a work in progress and has been hashed together some other work (it will be used to control scanning mirrors).

  Thanks in advance,

  Ben

  Hi Ben,

  I found an article in the Knowledge Base that relates to your specific problem. I linked it below.

  Reading Microsof Excel in LabVIEW digital data

  After you follow the steps in the KB, I changed the file to a text (.txt) file and was then able to read the data successfully and it draw on the XY graph using a modified version of your code that contains only the item file IO. If you make changes to your data file and then reference in the amended VI that I have attached, this will help to illustrate how you can view your data in LV

  I hope this helps.

  Best regards

  Christian Hartshorne

  NIUK

• I'm having trouble getting updates to download automatically...

  I can't get windows to download updates. I had this problem since 11/11/09. Is someone can you please tell me what I can do to fix this? I can't download 2007 Microsoft Office System, Microsoft Excel 2007, Microsoft Works 8.
  Thank you
  angrob93

  Compliments of my MVP TaurArian colleague:

  You can try to download the updates manually (search for a download
  http://www.microsoft.com/downloads/search.aspx?displaylang=en) or try the following command to see if it helps

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Where d = the drive where Windows is not installed (IE a flash drive or a 2nd hard disk etc.): click Start, run, type:

  "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes)

  and then press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Im having trouble getting the Blizzard world of Warcraft Downloader to send the last game, tasks in my WoW folder

  The Blizzard Downloader must be used to download patches MMORPG World of Warcraft as some more small are not on the download of files and sites sites third parties with patches WoW can not be guaranteed. Ive turned off Windows Firewall, Ive even tried to create a new rule to allow port 3724 which must be open, my WoW folder is not protected and when I click on the icon to start the download I chose FUNCTIONING as administrater.

  The problem is not with my router as the downloader worked fine when I used Windows XP. The patch is stopping at 10% and then to say that it has failed. Sometimes the sound indicating there may be a firewall. (Im using Windows 7 now). I even did a trouble Shooting in my network connection

  As it looks like the source of the file is corrupted try to get the file from another source that I had that issue a couple of times on different systems of Vista where the patch would not work on 1 system but on another system of Vista

• Having trouble getting beyond log in page for WRT54G2 - 192.168.1.1

  I'm more frantic in relation to the foregoing.  I followed all the instructions on the support without result.

  I try to connect to junction box, leaving username empty box and type "admin" in the password section, but on several trys, I get a message "404 none".  I actually went to Argos today and bought a new Wireless N home by Linksys router, but not yet open in case I managed to break it.  However, it is less and less likely.

  All this started when I need my Linksys password to synchronize my Amazon Kindle for the wireless network, but regret that I can not find the information anywhere.  I tried even reconfigure the router by resetting it, but cannot go further because I can not access the Linksys set up the page.

  I'd be happy if someone could help me, if he succeeds, then I don't open the new one I bought today.

  Thank you very much

  Jay

  Hi again.

  I finally set up my Linksys so hope Argos bring the router that I bought.  I did not open.  The only problem is that the laptop is now showing ' non-connected, choose a connection "."

  I'll try to explore it.

  Thank you very much.

• Having trouble getting a Dlink DWL-G820 wireless bridge to work with wrt610n

  I'm trying to get a few dlink wireless bridges to work with wrt610n, but not having a chance.  I left Wrt610n router with the IP default '192.168.1.1' and configured accordingly bridges with addresses "192.168.1.xxx".

  Wireless bridges is not happy.  Any ideas?  Bridges have been working well when I was with the IPS "192.168.0.xxx" with wrt610n

  Sorry guys, the problem was the security setting wireless that I used on the WRT610N, not the addressing system.

  Sorry for the inconvenience.