allocate more memory for my video card

Similar Questions

• Satellite P300-1EI (PSPCCE) - how to allocate more memory to the graphics card?

  Hello

  I have a laptop toshiba satellite P300 with this graphics card: ATI mobility radeon HD 3650.
  I want to allocate more memory for this graphics card. How could I do?

  I can't do this in my bios, I don't have this option...

  Another way?

  Hello

  Something like that is not possible because the graphics card driver it controls automatically.
  If the graphics card would need more graphics memory then the driver assigns the amount of necessary RAM automatically.

• SR2180NX adding memory and a video card, how?

  I finally decided to do a upgrade to my PC but I pushed my brain batty, trying to figure out how I would add memory and if I should update my video card now cause my Sims 2 game, instead of smooth running, it runs a little rough and frame by frame. Very annoying. I also want the Sims 3 to be able to run on my computer, I hope I can get it all done before they release.
  I have windows vista Home premium, and I have a PC I did not do anything for her, so it's a bit as if it was from the factory around a few programs of vanilla.
  
  * Manufacturer * Compaq Presario
  * Product * RK548AA-ABA SR2180NX
  Total number of logical CPUS * 2
  Total physical memory * 1.00 GB
  Total number of optical drives * 1
  Total number of disks hard * 1
  Total number of video cards * 1

  * Memory *.
  ------------------------------------------------------------------------------
  * System memory * total physical memory * 1.00 GB
  * Free physical memory * 443,21 MB
  Total virtual memory * 2.00 GB
  * Free up virtual memory * 1.94 GB
  * Page file space * 2.24 GB
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * Video card *.
  ------------------------------------------------------------------------------
  * Intel (R) 82945G Express Chipset Family * manufacturer * Intel Corporation
  * Video card chip Type * Intel (R) 82945G Express Chipset Family
  * Video card memory * 256,00 MB
  * Video card BIOS * Intel video BIOS
  *Driver*c:\windows\system32\drivers\igdkmd32.sys
  * Version * 7.14.10.1461, 25/03/2008
  ------------------------------------------------------------------------------
  and it's the plug to run the Sims 3
  ------------------------------------------------------------------------------
  THE SIMS 3 MINIMUM REQUIRED HARDWARE CONFIGURATION
  
  FOR WINDOWS VISTA
  * Windows Vista (Service Pack 1)
  * 2.4 GHz P4 or equivalent
  * 1.5 GB OF RAM
  * At least 6.5 GB of disk space hard at least 1 GB additional space happy Custom
  * 128 MB video card with support for Pixel Shader 2.0
  
  For computers using built-in graphics chipsets, the game requires at least:
  * Intel Integrated Chipset, GMA X 3000 or more.
  * 2.6 GHz Pentium D CPU, or 1.8 GHz Core 2 Duo or equivalent
  * 0.5 GB additional RAM
  
  SUPPORTED VIDEO CARDS
  NVIDIA GeForce series
  FX 5900, FX 5950
  6200, 6500, 6600, 6800,
  7200, 7300, 7600, 7800, 7900, 7950
  8400, 8500, 8600, 8800
  9600, 9800, GTX 260, GTX 280
  
  Series ATI Radeon™
  9500, 9600, 9800
  X 300, X 600, X 700, X 800, X 850
  X 1300, X 1600, X 1800, X 1900, X 1950
  2400, 2600, 2900
  3450, 3650, 3850, 3870,
  4850, 4870
  
  Intel® Extreme Graphics
  GMA X 3 x 00 series
  Laptop versions of these chipsets may work, but can run relatively slower. Autonomous cards installed in vanilla (not PCIe or PCIx or AGP) PCI slots, such as some GeForce FX variants, will perform badly. Intel chipsets integrated starring parts underclockes would not run properly.
  
  Chipsets integrated such as the ATI Xpress and the NVIDIA TurboCache variants will have low settings selected, but should operate satisfactorily.
  
  Please note that attempting to play the game using video hardware that is not listed above may result in reduced performance, graphical issues or make the game work do not at all.
  The NVIDIA GeForce FX series is unsupported under Vista.
  
  and he also said when I watched the news of the memory of the BIOS screen:
  
  Installed memory 1024 MB/PC2-4200
  Bank 1 512 MB/DDR2 SDRAM memory
  Memory Bank 2 not installed
  Memory bench 3 512 MB/DDR2 SDRAM
  Memory bench 4 not installed

  I know that I have to add memory and a video card, or even a power supply according to the video card, I get. Memory seems simple and easy to do, but the power SUPPLY and the video card, makes me a little nervous, any suggestions on what I should get and instructions on how to proceed will be greatly appreciated Thx! I apologize for this post being so long.

  Message edited by CareBear31 on 02/05/2009 13:02

  Adding instructions are here. When you buy new memory be sure and go to the website of the manufacturer of the memory. Use only brands so that they ensure th your product compatibility. Use the memory Configurator tools on the website of the manufacturer of the memory. Here are a few major brands for you: Kingston, Crucial, Corsair:

  Change the power supply: This video on youtube is pretty decent for generic power supply switching.

  Thislinkhas information on opening the cover and remove the cover.

  When you select a video card do not get cards great physically (i.e. ATI HD 4870 / 4850) because they are double wide and does not have limited space. Fantastic cards but are not for the pre-built PC.

  Any ATX PSU fits your case. 450 watts or therabouts enough for almost any addition of hardware on your pc. Do yourself a favor and stick the best brands such as Corsair, OCZ and others. Generic brands are not worth the problems they can bring even if they are cheaper.

• update the driver for a video card

  Recvd this msg: "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.  How do I do that?

  Hello

  To prevent the illegal creation of digital copies of DVD, information on most of the DVDs are blurred. Your DVD decoder and Windows Media Player have software to copy protection that decodes the information on the DVD just before posting. If this software does not start successfully, you may receive this error. Remove the DVD in the DVD drive and then reinsert. This will force the copy protection software to reset.

  While the DVD is out the disk, make sure that your DVD is clean. If your DVD is scratched or dirty, the DVD player may not be able to read it correctly, and you may receive this error.

  If this does not work, try the following:

  a. If you have been able to play DVDs on your computer before and you receive this error message, you may be able to solve the problem by restarting your computer or Windows Media Player.

  b. If you receive this error message the first time you try to play a DVD, you're not a DVD decoder installed, or your decoding software may need to be updated. In addition to your DVD - ROM drive and playback software, you must have a software or hardware decoder to play DVD decoders. devices and their drivers are available from third-party manufacturers. For more information on the software decoders, see DVD plug-in decoder. If you have a plu decoder installed, contact the manufacturer of the decoder to obtain an updated version that is compatible with the operating systems Microsoft Windows and Windows Media Player.

  Also, look at the Media Player Plug - ins - http://www.microsoft.com/windows/windowsmedia/player/plugins.aspx

• Qosmio G20 - how to find an update for the video card?

  Hi I can't find the update for the video card and when I run the game it hand me your video card drivers are too old.update them.
  my laptop:(toshiba Qosmio G20)
  My vidoe card: (NVIDIA GeForce Go 6600)
  Operating system: (Microsoft Windows XP Professional)

  Hey,.

  To be honest I don t understand your problem. Why visit nVidia?

  All you can download it from the download page of European driver from Toshiba as a boarder suggested. I even checked this and for Qosmio G20 and Windows XP you can get all the drivers no problem at all! :)

• P6-2305elm driver for AMD video card

  Hello!
  I bought the HP Pavilion p6-2305elm with Win 8, I installed Win 7, I can't find the drivers for the video card: AMD Radeon HD 7450, the driver from the official site of AMD do not work!
  Help me please!
  Thank you!

  Hello:

  Here's the W7 x 64 graphics driver owner amd uses your video card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-103179-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5155363 & sw_lang =

  Some members of the forum an error of installation when they're going to install this file.

  If you get such an error, conclusion of any windows error.

  Download and install this free utility for files.

  http://7-zip.org/

  Download, but are not re-run the graphics driver above.

  Right-click on the graphic driver file and select 7 - zip to extract the file name (sp56584).

  Once the file is done, go to the Device Manager and click to expand the category of display cards. Click on standard VGA card.  Click on the driver tab, click on set to update driver.

  Select travel it my computer for software driver and find the 7-zip folder created.  Make sure that the include subfolders is selected and the driver should install this way.

  When you restart, your graphics card should work fine.

• DVD Windows media player cannot play this dvd because it is not possible to activate the ANALOG on the output display copy protection try to install a driver available for your video card

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  When you try to play a dvd it (above) is displayed. Anyone know where I can be able to get a updated driver free for my video card, or in any other way to solve this problem. your help would be greatly appreciated. Thank you.

  =======================================
  What version of Windows are you using?

  The free VLC Media Player may be worth a try...

  It will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

  And the following links may be worth a visit:

  (2004673) Windows Media Player cannot
  read the DVD because it is not possible to
  turn on analog copy on the output protection
  view
  http://support.Microsoft.com/kb/2004673

  Windows Media Player cannot play the DVD because it is not
  possible to put on the protection against analog copying on the output screen
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=12.0.7100.0&ID=C00D1167&ContextId=61&OriginalID=C00D1167

• How to upgrade the driver for my video card?

  How to upgrade the driver for my video card?

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How to upgrade drivers for a video card for windows xp?

  When I tried to play a DVD, I got the msg in a pop up window: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card.

  An update of the video card is not the solution, read DVDs require return DVD encoder

  software that has digital rights to play a dvd. There is a lot of BS, the software can be had

  However, ATI offers a free DVD decoder, while nvidia has one but requires a fee.

  Media Digital Rights (DRM), is the problem

• I can't watch DVDs on my computer it say I need some update the driver for the video card

  I can't watch DVDs on my laptop it tell me I have to install a driver for the video card update

  Hello

  It seems that you try to update the drivers for DVD. I offered to you to update the video card reader.
  Try update video card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/video-cards-frequently-asked-questions

• Ntoskrnl 9f BSOD after updating drivers for the video card, usb 3.0, LAN, Rapid Intel ST

  Hello

  need help. I get the BSOD constantly to turn the computer off. Previously, I've updated the drivers for the video card, usb 3.0, LAN, Intel Rapid ST. could check my miniDMP and determine the driver causality. THX!

  ==================================================
  Dump file: 112014-19874 - 01.dmp
  Time of the accident: 20.11.2014 20:12:18
  Bug Check String: DRIVER_POWER_STATE_FAILURE
  Bug check code: 0x0000009f
  Parameter 1: 00000000'00000003
  Parameter 2: fffffa80'0cf7f060
  Parameter 3: fffff800'00b9c3d8
  Parameter 4: fffffa80'13915010
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 75bc0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\112014-19874-01.dmp
  Number of processors: 8
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 1 037 480
  Dump of file time: 20.11.2014 21:56:45
  ==================================================

  Minidumps files (note the oldest, one is before the update of drivers):

  https://onedrive.live.com/redir?RESID=264854BEFA762656! 1121 & authkey =! AACkoNzGq5RwWFw & ithint = the file % 2czip

  THX!

  PCH

  These were related to the AVerTM62_x64.sys TM6200 BDA Driver of AVerMedia TECHNOLOGIES, Inc..  I remove the current driver and install the latest driver available.

  

• How to install a driver for my video card updated? Online.

  How to install an updated for my video card driver online?

  How to install an updated for my video card driver online?

  1. click on the Start button.

  2. in the start search box type: Device Manager and press the Enter key.

  3. expand to see what graphics cards that the graphics card is there.

  4. visit the website of the manufacturer of the graphics card.

  5. download and save the latest compatible driver (eg.on your computer desktop)

  6. once the download is complete, double-click the file to run it and follow the instructions on the screen.

• How to decrease the memory on the video card to a windows 2003 VM?

  I know that the graphics card by default in ESX memory is 4 MB. To solve a problem, I increased the memory on the video card 16 MB by adding 'svga.vramsize = 16777216' to the vmx file. That has worked well. Now, I want to put it to 8 MB, but once I modified the vmx file, I reboot the virtual machine after the reboot, the vmx file goes back to the value of 16 MB. Windows always shows 16 MB. If I remove the line entirely out of the vmx file, it should go back to the default of 4 MB, but it shows still 16 MB in the windows operating system. Can anyone help with this?

  You must edit the vmx with off the virtual machine.

• Cannot allocate more memory to the virtual machine image

  Hello

  I am currently using VMWare Workstation 5.5.4.  I have a Win XP image that I run.  My host computer has 4 GB of ram (3 GB recognized by hospitality Windows OS).

  Currently, I am only able to allocate a maximum of 1 372 MB to my virtual machine Image.  I want to allocate more memory to my image, as I do more memory intensive tasks to my image.  If I try to increase the amount of memory (even to 1376 MB), I get the following error message:

  

  Any ideas on how I can increase the amount of memory I can attribute to my image?  I use only 1 image currently.

  Loking at your vmware.log file, I see that you have a section "DEFAULT USER" including a "prefvmx.allVMMemoryLimit = line 1429". I believe that it is in conflict with the ' SITE HOST/DEFAULTS ' section which specifies "prefvmx.allVMMemoryLimit = 2297".

  The ' HOST/SITE DEFAULTS' config.ini is the traditional config.ini file that people recommend that you edit.  On XP, it should be located in C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini

  I can't tell you exactly where the file config.ini 'DEFAULT USER' is located on Windows XP as I am running Vista.  I would start by looking under C:\Documents and Settings\\Application Data\VMware\VMware Workstation\config.ini to see if this file exists.  Or you can search your hard drive a config.ini file that contains the 'prefvmx.allVMMemoryLimit = 1429"line.

  I would recommend not not using the "DEFAULT USER" config.ini file at all.  In fact, on a default installation of Workstation 6.5 this config.ini file does exist.  I would recommend so transfer config.ini 'DEFAULT USER' settings to the "HOST/SITE DEFAULTS' config.ini and then delete the file config.ini 'DEFAULT USER '.

  After this is done, try again and let us know if things work better.

• Satellite T130 - how to allocate memory on the video card?

  Hi all

  You just bought a T130 has 4 GB of ram.
  I would attribute this to the video card.

  How can I do this, I do not see it in the BIOS, normally there is a setting to change AGP aperture but I can't.

  Does anyone know how to do this?

  Hello

  This setting is controlled by the driver of the software or the hardware itself and it cannot be changed. However, you really don't need to worry; If more RAM is required (almost always because of the game) it it will get to the need.