Cannot allocate more memory to the virtual machine image

Similar Questions

• Satellite P300-1EI (PSPCCE) - how to allocate more memory to the graphics card?

  Hello

  I have a laptop toshiba satellite P300 with this graphics card: ATI mobility radeon HD 3650.
  I want to allocate more memory for this graphics card. How could I do?

  I can't do this in my bios, I don't have this option...

  Another way?

  Hello

  Something like that is not possible because the graphics card driver it controls automatically.
  If the graphics card would need more graphics memory then the driver assigns the amount of necessary RAM automatically.

• Calc Dynamics Processor cannot allocate more than 350 the heap block of

  Dear users of Essbase,

  I am trying to implement some logic in order to get my calc done by dynamic calc and formula on members.

  My dynamic member calc with formula is not limited to offsetting the conditional statement to the role of alternative only, I see no problem.

  But in order to get the correct result, I include under condition ISMBR statement and restrict level 0 patch replacement on a sparse Member, I get this ' error Essbase (10127000): dynamic calc processor cannot allocate more than the blocks [350] from the jump. The parameter CalcLockBlock is too low or the size of data cache setting is too low. Increase the setting of the CalcLockBlock or the size of data cache setting and then try again '

  IF (@ISMBR (@RELATIVE("ALTERNATIVEROLLUP",0)))

  IF (@ISUDA ("SCENARIO", "XXX"))

  do something...

  ENDIF

  ENDIF

  I looked through this forum and tried to fix my problem in making changes on Essbase.cfg of DATACACHESIZE and DATAFILECACHESIZE values.

  I also checked in the settings of CALCLOCKBLOCK and the error message shows his tent to allocate more than the default value no. blocks that is 350 blocks in my tests.

  I have CALCLOCKBLOCK with HIGH as 4900, settings default than 350. Hope this is good enough.

  As it is on the dynamic calc and formula approach based on, would like to know how to face this question set.

  If you have encountered this problem would like to take suggestions. Thank you.

  Kind regards

  Praveen

  Of course, JM, it was my test script.

  I would like to change my script to be the best :-).

  And I could get rid of the Essbase error in improving more all hides and CALCLOCKBLOCK parameters.

  The operating current system cann't be changed to try chaning type of dimension and other changes required for the TBLAST property. It is one of the obligation that I work. Then try my best to correct and come out with the best solution.

  It is easy to build the new app with fresh demands to try to include new features to the existing system.

  Thanks a ton for your time and your suggestions.

• Cannot specify a directory for the Virtual Machine

  I'm new to ESXi naked with me.  I added some records and then to browse the data store and I added the folders in there to specify the different VM..., I have a XP Win7 folder folder, etc.  When I go to create a new Virtual Machine gives me only the choice to select a data store to store the HARD drive and not the folder structure I created in the data store.  Now I can delete the virtual machine to inventory, return to 'Browse the data store' and move the files, and then add the VMX file in the inventory, but it just seems like a pain.  Am I missing something?  Really can not be complicated to arrange your virtual machines, it can?

  Yes, you cannot specify a folder when you create a virtual computer to a data store.  I guess that he has not considered to organize things at this level and honestly.  Organization is really in the 'models and virtual computers '.

• Memory of the virtual machine in Windows 2008 32-bit Aignesberger.Software.website.Watcher.2010.busines

  Dear all,

  I installed the virtual machine with Windows 2008 32 Bit Standard Edition. Compact, his oar was 2 GB at this time there, everything was fine, I increased the ram to 4 GB. Now my Easerver 6.3.1 got crashed and pursuant to the original agreement we also reinstalled/reconfigured EA server, but it is always showing 2048 MB of memory instead of 4 GB.

  
  

  2554-11-08 13:09:17.733 INFO wire-34 after USER ID = Adeelme:cms
  Type of Message 2554-11-08 13:09:17.733 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:10:00.046: 19% (94/264/494 MB)
  Virtual memory use 2554-11-08 13:10:00.046 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] 13:11:00.051 INFO-2554-11-08: 21% (104/264/494 MB)
  Virtual memory use 2554-11-08 13:11:00.051 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  2554-11-08 13:11:15.000 INFO component/method name Thread-34 [JaguarServer] = n_app_controler/of_getapplication

  Type of Message 2554-11-08 13:11:18.631 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:12:00.052: 14% (74/264/494 MB)
  Virtual memory use 2554-11-08 13:12:00.052 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  

  Thank you

  Adeel Imtiaz

  Yes - you can
  but that will make your VM very slow

  set
  prefvmx.minVmMemPct = "50".

  or less - allowing you to approve the RAM
  Set this parameter in your config.ini file

• Cannot create an instance on the Virtual Machine Java

  Hello world
  
  I installed 11.1.2.3.0 Jdeveloper.
  And tried to run the Jdeveloper but got error below:
  
  "Failed to create an instance on the Virtual Machine Java located at c:\oracle\Middleware\jdk160_24\jre\bin\client\jvm.dll road.
  I tried several options but nothing has worked for me.
  
  Please suggest solutions for this.
  
  Thank you.

  Hello
  Check

  http://no-con-fusion.blogspot.com/2011/06/unable-to-create-instance-of-Java.html
  http://pisceansheart.WordPress.com/2009/08/06/solution-to-unable-to-create-an-instance-of-the-Java-virtual-machine-for-JDeveloper/

• Cannot create an instance of the Virtual Machine Java

  Hi all

  I try to install and test the Jdev OAF for R12.2.4 in patch 19170592

  After installation, when I run the page you arest_fwktutorial.jsp and click on Hello world or any other link, it gives me an error saying: failed to create an instance of the java virtual machine...

  Here is the part of the Jdev log file:

  URL - target http://***/:8988/OA_HTML/test_fwktutorial.jsp

  March 9, 2015 17:06:47 oracle.jsp.logger.JspMessages infoCannotDispatchJspPage

  INFO: Failed to send the JSP Page: oracle.jsp.provider.JspCompileException: < H3 > errors compiling:C:\Users\XXX\OAFR12\jdevhome\jdev\myclasses\.jsps\\_OA.java < / H3 > < pre > WARNING: cannot find default VM 'ojvm' to...... \jdk

  help the client instead.

  Error occurred during initialization of VM

  Could not reserve enough space for lots of things

  I use a desktop computer of Windows 7 with 64 bit OS and 4 GB of RAM

  Can anyone help please if you know of a fix for this error.

  Thank you

  -John.

  for the record, the procedure below solves the problem:

  1. Open the control panel
  2. Go to system
  3. Go to the properties of advanced systems
  4. Environment variables can
  5. In System Variables, click Add
  6. New name of the Variable: _JAVA_OPTIONS
  7. New value of the Variable:-Xmx512M
  8. Click OK

  Thank you

  -John.

• I use Adobe Photoshop CC 2015 and it takes a long time to open... too long!  How can I allocate more memory to the program photoshop - I have a lot on the computer, but photoshop is a great program and needs more juice - need help!

  More memory to an application.

  Hello...

  Try not to have too many applications running at the same time, you use Photoshop. Freeing system resources.

  Adobe recommends up to 8 GB of RAM here > https://helpx.adobe.com/photoshop/system-requirements.html

  You can see how much memory is installed on your Mac by clicking on your Apple  menu then click on about this Mac, then make sure that the "View" tab is selected.

  The amount of RAM is installed on your Mac is noted here.

• JDev 12 c: cannot create an instance of the Virtual Machine Java

  Hello!

  I installed JDev 12 c on windows7 64-bit and you try to run the first time and this error occurs.

  The path inside the message point to < myHome > \oracle_common\jdk\jre\bin\client\jvm.dll.

  A jre, version that is installed:

  < myHome > \oracle_common\jdk\jre\bin > java-version

  Java version "1.7.0_15".

  Java (TM) SE Runtime Environment (build 1.7.0_15 - b33)

  Java Client VM (build 23, 7 - b01, mixed mode)

  In the calling batch script I see after release:

  Error occurred during initialization of VM

  Could not reserve space of enougs for lots of things

  Anyone has the same problem?

  Kind regards

  Torsten

  Torsten,

  What installer did you use? I used the Windows 64 Installer and he started from the command line as an administrator. I have installed JDK7 (64-bit) and it worked very well.

  Frank

• Could not power on VM: no space is available on the device: cannot power on the virtual machine.

  VMware esx ei, 3.5.0 123629

  Physical memory: 64 GB

  Hard drive: 1.63 TB

  7 virtual machines. 5 of them are configured with 4 GB memory and 2 of them with 2 GB of memory. I am able to power on 3 virtual machines with 4 GB of memory.

  When I try to turn on 4th VM with 2 GB of memory, I get this error message "could not power on VM: no space is available on the device: cannot power on VM.»

  I would like to know if this is the limitation of the ESX Server? How should I size the memory for VMS if I want to run every 7 virtual machines to the

  Moreover, given that I have 64 GB of physical memory. Is there documentation that provides a report of the maximum allowed memory configurable

  compared to the virtual memory?

  Thank you

  Ganesh.

  Ganesh,

  Memory reservations are defined based on VM by VM.

  You can allocate more memory to the virtual machines you have in your host (it's not really a good idea to go crazy with the overcommitment of memory, but some level of excessive pressure is used in general).  Memory applied to your VM resources are shares, bookings and VMkernel Swap limits.

  Just to illustrate:

  You allocate 8 GB memory to a virtual computer.  If you take all the parameters by default, ESX will allot a 8 GB VMkernel Swap file in the base directory of your VM (it will have the extension ".vswp") this VMkernel Swap file is a safety net.  Your virtual machine, at this stage, can consume up to 8 GB of memory If physics is available from the host.  If the memory of your host is overcommitted, some of the available memory 8 GB could be allocated on 8 GB VMkernel Swap file.

  If you set a reserve of memory - 2 GB - this means that the vmkernel will still award the first 2 GB of memory used by the virtual machine to the physical memory.  This is not means that the 2 GB of memory reserved is carved off the coast and completely dedicated to the virtual machine.  This means that the vmkernel offers up to 2 GB of RAM to the VM when and if she needs to use it.  It is a guarantee that the memory will be available upon request.  Because of this guarantee of the VMkernel, VMkernel swap file only has to make sure that the 6 GB memory is satisfied (4 GB total less the 2 GB reserved), so the VMkernel Swap file is only 6 GB in size.

  Actions are a mechanism for prioritization and limits are a cap on physical memory ever allocated to the VM.

  You can set up any number of memory for the virtual machines that you want - frankly, overcommitment of memory for ESX is a very good thing, but you must be vigilant about watching your systems if approve you.  If you have 64 GB of RAM, and you only configure your virtual machines to use total 32G, then you lose 32 GB of RAM.  If you allocate, say, 96 GB of RAM (total) to your virtual machines, then you look at a 50% overcommitment.  What to watch in overcommitting memory is application performance (and more importantly - perception of the user of this performance) and also the memory ballooning and VMkernel Swapping activity.  Those who can both will be in graphics performance in VirtualCenter.  I would recommend reading the Guide to management resources for more details.

  Hope that provides an overview.

  Thank you

  -jk

• The memory of the VM Machine resources

  Hello. I have a host running ESXi 3.5. It is our host of test for our own research and development. Currently, we have 4 Windows Server on this host. The PDC is a Windows Server 2008 R2 X64Enterprise kernel install. Under the tab "Virtual Machines" of the VI Client the use of memory for this virtual machine is 98%. When it was originally configured, we have allocated 2 GB RAM for this box. I would like to know if this memory usage is common in this configuration? Should I just allocate more memory for this virtual machine? Other than to be the domain controller it is the DNS server. Thanks for your comments.

  Must see inside the VM, how memory is allocated.

  For a DC + DNS 2 GB may be sufficient:

  http://TechNet.Microsoft.com/en-us/library/cc268214.aspx

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• SRM 5.5 - vSphere replication - error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

  Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

  One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

  More worrisome is the virtual machine which don't reprotect at all. It generates an error whenever I click on the "Restore" button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).

  
  Does anyone have any ideas as to the cause?

  Thanks in advance for any help.

  Andy

  Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

  The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

  To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the 'fade' snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

• allocate more memory for my video card

  model of my laptop is HP Pavilion dv4-1444dx entertainment notebook pc. I want to put more memory for the video card. my friend told me that I can assign more ram to my video card. I wanted to reach a certain condition for a game, but the "dedicated video memory" is only 64 MB. the allocated memory is 1.2 GB. I want to increase dedicated video memory. Help, please. Thank you.

  Hello

  Unless you see a BIOS setting allows to allocate more memory from the memory installed modules, it cannot be changed. I just checked the service manual for your laptop series. There is no setting in the BIOS, so the answer is that you can not change it.

  Your best bet is to increase the installed memory to the maximum, depending on whether your OS is 32-bit or 64-bit.

  A 32-bit operating system may use no more @3.2 than GB of RAM while a 64 bit OS can use as much as the motherboard of your laptop (by design) will accept.

  Best regards

  ERICO

• resize the disk space on the virtual machine

  Hello!

  I have a small problem, when I converted a virtual machine on my esx server so I chose 14FR for the virtual machine.

  But I now realize that I need more space on the virtual machine. but the problem is that I stop the virtual machine and

  give more space but the does not get more space than any alcolated in diskmgmt. and there I have to

  make a new partition.

  Can I add a disc more on C: by do not format the drive? or can I add more disk space to a new partition

  (if I add 20 GB now and want to add 20 extra GB to the same partition in 2 months or something like that?) ??

  Thank you

  / R

  http://malaysiavm.com/blog/how-to-resize-Windows-2003-Server-virtual-disk-on-VMware-ESX/

  Here is the guide. Hope is useful.

  Craig

  vExpert 2009

  Malaysia, VMware communities - http://www.malaysiavm.com

• You cannot use vSphere client to change the settings of the virtual machine v10 or more

  Hello

  I just downloaded new version of Kali Linux to do some tests with my free version of ESXi update 5.5 2, the problem is that I can't change the settings of the virtual machine in vSphere Client.

  It's so good because of the independence of Web OS Client vSphere but what about the free version? Everyone knows you need a vCenter running successfully and a license for the vSphere Web Client.

  There is no free version of VMWare vCenter.

  Nice day.

  http://www.vmwarearena.com/2014/09/vSphere-client-5-5-Update-2-edit-hardware-version-10-VMS-using-vSphere-client.html