Allocation of 8 KB size

Similar Questions

• Linux kernel parameters and Oracle memory allocations.

  I'm currently creating an Oracle 11 G R2 in database, on a Linux (SLES 11) OS. The software OS and DB are the two 64-bit.
  I wondered about the optimal method of memory allocation shared, such that I can get the automatic memory management to recognize 12G of memory (which allows 4 g for the operating system and other pieces).
  
  I put the kernel parameters are:
  SHMMAX: 8589934592 (the recommended physical memory/2).
  SHMALL: 3145728 (giving a total of 12 GB of shared memory allocation that the page size is 4096).
  
  The way I read the documentation, it must free up enough shared memory to allow the specification of a memory_max_target and memory_target "11 g". I'm getting 11G to ensure that I am not ruin by a few bytes (if it all works, I will develop to 12G).
  However, whenever I try a startup, I get the ' ORA-00845: not supported on this system MEMORY_TARGET' error.
  It disappears if I create a great shmfs block using a mount command, but I was under the impression you had is no longer to do with 64-bit and Oracle 11 G system.
  
  Could someone clarify a little bit about what I'm doing wrong and where I should be looking for the answer?
  
  See you soon,.
  
  Rich

  Note 749851.1 ID and ID 460506.1:

  AMM all SGA memory is attributed by creating the files under/dev/SHM. When Oracle DB not allowances of SGA that HugePages reserved/does not serve. The use of the AMM is absolutely incompatible with HugePages.

  eseentially, AMM requires that/dev/SHM.

• HP ENVY 15-v010nr: 15-v010nr

  Hello

  I wish I could change the integrated video card memory pre-allocated DVMT Graphics (fixed) size.  for some details down games...

  I don't have access to right now in this bios... its coastline.

  You have the Intel HD 5500 graphics card with up to 3839 MB total graphics memory. There is no setting in the BIOS for the video memory allocation. It has not been for years. Everything is done automatically in the processor and the video chip. In other words, you have already found all of the video memory and video chip performance must give. There is nothing more you can do.

• Try to cure a bottleneck of the circular network

  Hello

  I have a bit of a bottleneck problem using a circular table. What I need is a buffer as the structure of doubles that will allow me to access an element at the end and to operate as efficiently as possible. I originally used a queue that took about 40 seconds to process a txt file that I use for testing. I changed to a circular table and am now at the 12 total seconds. I need to get faster if I can in this single buffer about 75% of my execution and is the single biggest bottleneck.

  Are there any other structure I could use to keep a buffer of fixed size and go to the item at the end more effectively? I implement the table as efficiently as possible? I have attached my screws and screenshots. "simplefixedbuffer" is the circular matrix and "getNextCircularIndex" is the mechanism to update the pointers to the beginning and the end.

  My assumption that it is the most effective way to do so is based on the belief that no copy of the entire table takes place inside the native labview function "Insert table" since I apply a fixed size for the table. Please correct me if this assumption is wrong or if there is another method of insertion I should use to avoid copying.

  Thank you!

  

  

  You want to replace the subset not insert into the table. You are also allocating an array of size of buffer for each call.

• Invoke the 'weird' wiring of node error

  Community of greetings OR.

  I know I've posted a lot about going I2C communications USB and now I'm set another controller in addition to the USB-8451, namely Dinah DLN-2 - http://www.diolan.com/products/dln2.html.

  Now, basically, I'm trying to assemble my LabVIEW code that I wrote before working with Dinah and Dinah was invaluable - same level that NEITHER!

  But I tried to run this code (attached), but I get a Terminal error unwired or bad to both call nodes (read and write - errors 2 - 1 for each) - but there is nothing to the thread to/from and the engineer of Dinah who helped me: his works very well (attached screeshot). This is exactly the same code, I just cleaned up a bit, mine but did not make changes.

  Is there something that I need to activate on my end to my code runs?

  Thank you!

  TheLT

  without the DLL it is difficult to say, but Im thinking the berries need will be allocated to the right size (table of initialization)

  The nodes are thowing errors

• If I expanded my page file it will slow down the my computer?

  original title: question of Page file.
  If I do my pagefile to high it will slow down my computer. What size do you recommend for xphome, serv.pk.3, win. Exp 8, 32-bit color, cap 28.6 GB drive with 18gbfree, 256 MB of ram. Right now I have 800 MB allocated to the total size of pagefile for all readers.

  I changed my pagefile to 385 x 385 and changed manage the use of mem for better for appearance to let windows decide what works best. So I changed my mini to the full kernel dump file. I tried to move the pagefile from drive c where I assume that windows is installed in the disc volume label box but there is only one disc in the box and it wouldn't let me do anything IE no response in the mouse. How do you add another drive for the drive volume label area? My computer is a stand alone im thinking what it would take to being connected to a network? Once I restarted my comp... regardless I, really helped 'US' and there was a significant increase in speed. If YOU YOU YOU YOU a lot indeed. Dana Rose

• Can I go back 5 months for system restore

  To what extent is it possible to go back to system restore. ?

  You will have a certain amount (%) of disk space allocated to system restore points. When this space is used, the oldest restore point is removed. To see how far behind you can go now it just look at the available restore points as it will vary with your % allocated space and the size of the hard drive.

  You can allocate more space and therefore go further in the future. Of course you can not use this to create restore points in the past.

  If you turn System Protection off then turn it back on it at any time as all the previous restore points will be deleted.

  For more details, please see:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• Receive lots of BSOD due to ntoskrnl.exe, they stopped, but started again after a month

  I get lots of BSOD. I installed "WhoCrashed" and analyze the dump files. Here's what he said:

  Saturday, October 3, 14 17:29:30 GMT PM your computer crashed
  crash dump file: C:\Windows\Minidump\031014-15147-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75B80)
  Bugcheck code: 0x4E (0 x 0x2007E, 0 x 2, 0 20075, 99)
  Error: PFN_LIST_CORRUPT
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that the page frame number (PFN) list is corrupted.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem. This could be a case of corruption of memory. The corruption of memory more often happens because of software errors in the defective drivers buggy, not because of RAM modules.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  I have this problem for a long time. I've updated the drivers, windows updates, no effect. But, for some reason, he did not seem since February. But Monday, I used MiniCygwin_GOptimize_v1.34.02 to compress files apk android. He uses a lot of CPU. And after that the BSOD began to reappear. I downloaded the Minidump file and Information System if someone wants to check.

  Let me know the reason for these BSOD and how can I solve this problem.

  Hello

  We have many bug different controls:

  PFN_LIST_CORRUPT (4th)

  This indicates that the page frame number (PFN) list is corrupted.

  This error is usually caused by a driver passing a list of descriptor of bad memory. For example, the pilot could call MmUnlockPages twice with the same list.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1A, {5003, fffff780c0000000, 6933, 64ba0002d266}

  -1 setting of the bug check is 5003 which lists free work is corrupt. It is probably a hardware error.

  We also have another 1st parameter:

  Error checking 1 a, {fffff6800005cf40, eab00001beb34867,403, fffff6fc00df59a0}

  - Parameter 1 of the bug check is 403 which indicates the page table and NFPs are out of sync. It is also probably a clerical error.

  ^^ Pointed out that both of the above can still be caused by a driver causing corruption, but it is generally unlikely.

  And another...

  Error checking 1A, {41284, 159a0e001, 104 d 57, fffff70001080000}

  -1 setting of the bug check is 41284 indicating a PTE or the fixed work list is corrupted.

  BAD_POOL_HEADER (19)

  This indicates that a pool header is corrupt.

  Error checking 19, {20, fffff8a00b91df40, fffff8a00b91e020, 50e040c}

  6: kd >! pool fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown
  fffff8a00b91d000 size: 4 d 0 previous size: 0 Ntff (allocated)
  fffff8a00b91d4d0 size: 30 size: 4 d 0 PfFK (allocated)
  fffff8a00b91d500 size: 30 size: 30 PfFK (allocated)
  fffff8a00b91d530 size: 10 previous size: 30 (free) NtfE
  fffff8a00b91d540 size: 30 size: 10 Ntf0 (allocated)
  fffff8a00b91d570 size: size previous 10:30 (free) Nbmc
  fffff8a00b91d580 size: 40 previous size: 10 DxgK (allocated)
  fffff8a00b91d5c0 size: c0 size previous: AfdX (protected) process (allocated) 40: fffffa801098c7f0
  fffff8a00b91d680 size: 170 previous size: c0 MPsc (allocated)
  fffff8a00b91d7f0 size: size previous c0: 170 FIcs (allocated)
  fffff8a00b91d8b0 size: 40 size: c0 (allocated) NtFs
  fffff8a00b91d8f0 size: 30 size: 40 (allocated) PfFK
  fffff8a00b91d920 size: 30 size: 30 Ntf0 (allocated)
  fffff8a00b91d950 size: 150 size: 30 FMfn (allocated)
  fffff8a00b91daa0 size: size 160: 150 FMfn (allocated)
  fffff8a00b91dc00 size: 40 size: 160 (allocated) MmSm
  fffff8a00b91dc40 size: c0 size previous: 40 FIcs (allocated)
  fffff8a00b91dd00 size: 10 size: c0 sect (free)
  fffff8a00b91dd10 size: 170 previous size: 10 MPsc (allocated)
  fffff8a00b91de80 size: size previous c0: 170 (allocated) NtFs
  * fffff8a00b91df40 size: size previous e0: c0 (free) * FIcs
          PoolTag FIcs: Context of FileInfo FS-Filter binary stream: fileinfo.sys

  ^^ Block of pool who looked in the page pool belongs to the context of FileInfo FS-Filter flow. This is related to the file system.

  6: kd >! poolval fffff8a00b91df40
  Pool page fffff8a00b91df40 region is unknown

  Validation of the headers of pool the pool page: fffff8a00b91df40

  [Fffff8a00b91d000] page pool is __inVALID.

  System_service_exception (3B)

  This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  
  This error has been linked to the excessive use of expanded memory and resulting from user mode graphics drivers enjambment and passing data incorrect of the kernel code.

  2: kd > fffff960000a874f ln
  (fffff960'000 a 8720)   win32k! NextOwnedWindow + 0x2f |  (fffff960'000 a 8770) win32k! xxxRemoveDeleteMenuHelper

  ^^ The exception is produced in win32k! NextOwnedWindow.

  -----------------------

  Overall, this looks like the faulty RAM. It's not like there is a foul-smelling waters driver causing memory corruption here, but it is possible. The reason I mention this is because I see it in the crash dumps after dumping the! v

  OVERLAPPED_MODULE: Address overlap 'WinUsb' and 'ssudbus.sys'.

  ^^ WinUsb.sys - pilot class USB Windows system, it is a part of Windows. ssudbus.sys-

  SAMSUNG USB Composite Device Driver. Probably a part of Samsung Kies. Uninstall everything that you can find this topic.

  -----------------------

  Please run Memtest for NOT LESS than 8 ~ (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Something wrong with hard disk resizing

  I'm under 4.1.2 and you just import my Windows 7 Bootcamp machine into a true virtual computer.  I ran out of disk space while trying to install new software in Windows so I stopped and went settings to resize the virtual disk.  While the machine of Bootcamp was 30 GB the setting for the new machine watch as GB 465,76, which is be the size of the Lion partition on the hard drive.  Knowing it's not right and something can happen when importing, I tried shrinking the machine by following the process here.  No dice, my machine stills shows the drive as being 465,76 GB and I can't do the 60 GB I would.  I'm afraid to try anything else without posting everything here first.  Any tips or ideas on what I am doing wrong?

  -Dave

  What you see is the (although IMO the wrong) way that VMware matter partition Boot Camp to a Virtual Machine however based file so that you can not reduce the allocated virtual hard disk size but you can change the size of the virtual partition to increase the space available on the disk by removing the not used OS X in the virtual hard disk partition.

  For general information, take a look at my answer: Re: counterintuitive VMWare Instructions on resize virtual disk

• BI Apps 11.1.1.7: Regional coordinating unit failed to create DEV_DW user or role

  Hello
  
  I install the Oracle BI Applications 11.1.1.7 on Linux OS. While running the utility BI Apps RCU, after you select the components of Oracle BI Application and tablespaces and clicking Next, I get an error message: ORA-01917: user or role DEV_DW does not exist. I would like to mention that the dmp files have been copied to a globally accessible folder writable on the machine hosting the database server. Anyone faced with a similar question? Please let me know a workaround.
  
  Best regards
  Karamba.

  The database version is not a problem. We need to make it sufficient disk space to accommodate the set tablespace size. The error message is misleading, but then on checking space, disk and allocation of the smaller sizes for tablespaces the problem has been resolved.

• PS Format custom Plugin - problem reading files > 2 GB & < 4GB

  This question is fixable in our format plugin code, or is this a limitation of photoshop?

  I am new to Photoshop and Photoshop Plugins.  I have reviewed the documentation of the photoshop sdk & searched the web on this topic.

  I work with a plugin for photoshop format written by my predecessor, who is no longer here.

  The plugin is inspired the simpleFormat plugin.

  The plugin is used on systems running Photoshop CS6 & CC on 64-bit Windows 7 with 8 GB or more of memory.

  The plugin allows a file of our formula to be opened, read, and written.

  ------------------------------------------------------------------------------------------ --------------------------------------------------------------

  QUESTION:

  The plugin works fine reading < 2 GB or 4 GB files >.  For files between 2 GB and 4 GB, the allocation call memory fails.

  ------------------------------------------------------------------------------------------ --------------------------------------------------------------

  In structure of the plugin PIPL: {32767, 32767} FormatMaxSize PluginMaxSize {PlugInMaxSize {2147483647, 2147483647}

  ----------------------------------------------------------------------

  In the code of the plugin.  the DoReadStart() method opens the file and reads the file header information.  It works very well.

  Then, in the DoReadContinue() method: SPsBuffer-> New (& bufferSize, buffersize) returns NULL.     see below.

  void PluginMain (const int16 selector,

  FormatRecordPtr formatParamBlock,

  intptr_t * data,

  Int16 * result)

  {

  ...

  gFormatRecord = reinterpret_cast < FormatRecordPtr > (formatParamBlock);

  gPluginRef = reinterpret_cast < SPPluginRef > (gFormatRecord-> plugInRef);

  gResult = result;

  gDataHandle = data;

  ...

  sSPBasic = ((FormatRecordPtr) formatParamBlock)-> sSPBasic;

  ...

  If (gCountResources == NULL |)

  gGetResources == NULL |

  gAddResource == NULL |

  			gFormatRecord-> advanceState is NULL)
  		{
  			* gResult = errPlugInHostInsufficient;
  			return;

  
  
  }

  		new for Photoshop 8, columns, lines, and large documents are now > 30000 pixels
  		If (gFormatRecord-> HostSupports32BitCoordinates)
  		gFormatRecord-> PluginUsing32BitCoordinates = true;

  ...

  }

  public static void DoReadPrepare()

  {

  gFormatRecord-> maxData = 0

  }

  public static void DoReadContinue (void)

  {

  Int32 done;

  Total Int32;

  Int32 line;

  VPOINT imageSize = GetFormatImageSize();

  / * Set up variables buffer and progression. */

  Done = 0;

  Total = imageSize.v;

  PixelData PTR = NULL;

  RawData PTR = NULL;

  UncompressedData PTR = NULL;

  Mr. angles: Int64 * = NULL;

  / * allocate buffer pixel. */

  unsigned32 bufferSize = gFormatRecord-> aircraft * imageSize.v * imageSize.h;

  pixelData = sPSBuffer-> New (& bufferSize, bufferSize);            < = this allocation fails for file sizes > 2 GB and 4 GB <.

  If (pixelData is NOTHING)

  {

  * gResult = memFullErr;

  return;

  If (* gResult == memFullErr) {goto ReadContinueCleanUp ;}

  }

  (1) ask for anything above 2 gig is risky. Try to break your problem into smaller pieces.

  (2) you are more unsigned32 flowing. That max out at 4 GB. Your request for 5 gig is really 1 gig.

  (3) we have a new New64 now which takes a unsigned64. Point against #1 but available for those who dare.

• Cannot extend a virtual disk in vSphere

  I can't extend my hard drive of the virtual machines.  I'm running on ESXi 4.0.0 208167 with more than 1 TB of free space in the local storage. The virtual machine is currently set up with thick Provisioning, but I've tried too thin (using storage vMotion to change).  Currently 10 GB is allocated and the block size allows 256 GB of files as there are no snapshots.  No matter if the virtual machine is powered on or off, or the other.

  Any ideas would be appreciated.

  The VMX configuration file is attached.

  Welocme again.

  In the vmx file I saw that you are using an IDE ide0:0.fileName = ' 83-XPVM - 01.vmdk ' drive you can not resize the IDE drives in the dialog 'change settings '. You need to do this, use the converter. When you use the converter that you can - if you want - change type of for example the SCSI LSI controller.

  André

• recommendation of the number of ASM disks on 11 GR 2

  Hi all
  
  I'm deployment RAC Oracle 11 g 2 + ASM AIX6.1 and an EMC SAN.
  
  I am planing to create three groups of disks DATA, FRA, and OCR, I use external redundancy.
  I have the questions:
  
  How many records you create for each group of records? is there any number of disks recommended for the DATA and FRA?
  FRA: This is for the flash recovery area disk group so all the backups will be stored here. should have the size of the DATA multiplied by 2?
  OCR: Will contain OCR and voting disks, is it enough not to have only a single drive since I'm on external redundancy? What is the recommendation?
  
  Kind regards

  Hello

  What is the right way to create my ASM disks? If I follow these steps, I should find the/dev / disks in my ASM_DISKS list? and then, of these discs, I can create my groups of disks?

  Yes... It is simpler than Linux (when you use MPIO or ASMLIB)... On AIX you just set the permission on/dev/rhdisk and asm_diskstring/dev/rhdis *, you need to create partition (LV) on these physical disks.

  These permissions are constantly, only returning to the default root: System in case of device to remove/add.

  You must use rhdisk hdisk.

  The special file rhdisk provides first IO functions to access and control to physical disk for the physical disk device drivers. Access IO gross is provided through the/dev/rhdisk0, / dev/rhdisk1,..., character special files.

  Direct access to physical disks through block special files should be avoided. This access may affect the performance and also cause problems of consistency of the data between the data and the data in the buffer cache pages system block I/O. Special files/dev/hdisk block are reserved for the system in the management of logical volumes, paging devices and file systems.

  Important: the physics of the disks MUST NOT have PVID. {: identifier of the thread = 2312281}

  # Added: edited by: Levi Pereira January 12, 2012 16:07
  Also, I recommend:
  DOC said: Oracle recommends that the allocation unit (to THE) size for a group of disks attached to 4 megabytes (MB).
  Definition of SIZE is a difference when you don't need broadband to e/s. IE: used for Diskgroup that will store the data files

  See the example:

  # lspv
  DISK            PVID                                VG_NAME
  ============================================================
  hdisk12         none                                None
  hdisk13         none                                None
  hdisk14         none                                None
  
  ## Change permission of /dev/rhdisk*  to GRID OS owner and ASMADMIN OS group and "chmod 660"
  ## If you are not using  job role separation installation the default is "oracle: dba"
  #  ls -ltr /dev/rh*
  crw-rw----    1 oracle   asmadmin     17, 10 Jan  5 17:01 /dev/rhdisk12
  crw-rw----    1 oracle   asmadmin     17, 11 Jan 12 15:00 /dev/rhdisk13
  crw-rw----    1 oracle   asmadmin     17, 12 Jan 12 15:16 /dev/rhdisk14
  
  Disks to discover [disks=raw,asm,all]
  raw = disks not used by ASM
  asm = disks used by ASM
  all = All disks
  
  $ /u01/app/grid/grid_has/kfod disks=raw asm_diskstring='/dev/rhdisk*'
  --------------------------------------------------------------------------------
   Disk          Size Path                                     User     Group
  ================================================================================
     1:     204800 Mb /dev/rhdisk12                             oracle   asmadmin
     2:     204800 Mb /dev/rhdisk13                             oracle   asmadmin
     3:     204800 Mb /dev/rhdisk14                             oracle   asmadmin
  --------------------------------------------------------------------------------
  ORACLE_SID ORACLE_HOME
  ================================================================================
        +ASM /u01/app/grid/grid_has
  
  SQL>
  set linesize 100
  col path for a30
  col header_status for a20
  select path,header_status from v$asm_disk
  where header_status <> 'MEMBER';
  PATH                           HEADER_STATUS
  ------------------------------ --------------------
  /dev/rhdisk12                   FORMER
  /dev/rhdisk13                   FORMER
  /dev/rhdisk14                   FORMER
  
  $ sqlplus / as sysasm
  
  SQL>
   CREATE DISKGROUP DATA NORMAL REDUNDANCY
      FAILGROUP STG1_CTL1 DISK '/dev/rhdisk12'
      FAILGROUP STG2_CTL1 DISK '/dev/rhdisk13'
      FAILGROUP STG1_CTL2 DISK '/dev/rhdisk14'
   ATTRIBUTE 'compatible.asm' = '11.2.0.0.0';
  
  Diskgroup created.
  
  $ asmcmd lsdg DATA
  
  Inst_ID  State    Type    Rebal  Sector  Block       AU  Total_MB  Free_MB  Req_mir_free_MB  Usable_file_MB  Offline_disks  Voting_files  Name
        1  MOUNTED  NORMAL  N         512   4096  1048576    614400   614238           204800          204719              0             N  DATA/
  
  $  asmcmd  lsdsk -p -G DATA
  Group_Num  Disk_Num     Incarn  Mount_Stat  Header_Stat  Mode_Stat  State   Path
          5         0  782499361  CACHED      MEMBER       ONLINE     NORMAL  /dev/rhdisk12
          5         1  782499362  CACHED      MEMBER       ONLINE     NORMAL  /dev/rhdisk13
          5         2  782499363  CACHED      MEMBER       ONLINE     NORMAL  /dev/rhdisk14
  
  $  asmcmd lsdsk -k -G DATA
  Total_MB  Free_MB   OS_MB  Name       Failgroup  Failgroup_Type  Library  Label  UDID  Product  Redund   Path
    204800   204746  204800  DATA_0000  STG1_CTL1  REGULAR         System                         UNKNOWN  /dev/rhdisk12
    204800   204746  204800  DATA_0001  STG2_CTL1  REGULAR         System                         UNKNOWN  /dev/rhdisk13
    204800   204746  204800  DATA_0002  STG1_CTL2  REGULAR         System                         UNKNOWN  /dev/rhdisk14
  

  Kind regards
  Levi Pereira

  Published by: Levi Pereira January 12, 2012 15:50

• How can I specify the AU_SIZE attribute in YES

  Hello
  
  How can I specify the AU_SIZE when I create the Group of disks for disk OCR and vote when I install the House of GI.
  Basically, I want to create the disk with AU_SIZE group as 4MB when I create Via YES. I know that I can change the attributes when I using ASMCA. But not sure, YES.
  
  Please can someone guide me?
  
  Concerning
  Joe

  Hey Joe,

  Did you mean that I will need to move the OCR/vote * to an another diskgroup-> drop those created during installtion--> recrerate the diskgroup with AU_SIZE as you wish

  Yes... you should move the OCR, VOTING and ASM SPFILE to an another diskgroup and recreate the diskgroup.

  DOC said: Oracle recommends that the allocation unit (to THE) size for a group of disks attached to 4 megabytes (MB).
  I don't see any benefits to configure the 4MBytes to THE SIZE for diskgroup that will store only the Clusterware files.
  The voting are stored directly on the drive of the ASM (i.e. not at THE SIZE of use). The OCR file and use ASM SPFILE to THE SIZE, but are not frequently consulted (low e/s) and files are too small to set up to 4MBytes.

  SIZE of the game by THE way a difference when you don't need broadband to e/s. IE: used for Diskgroup that will store the data files.

  I recommend that read my point of view how to store files of VOTING, OCR and SPFILE ASM about ASM.
  Re: disc of voting 3rd on nfs share

  Kind regards
  Levi Pereira

• Problem with the compilation of AIR with the (police) Embed tag

  Hello

  I have an application developed for AIR. When I compile it without the fonts I need to incorporate it is compiled without a problem when I add the Embed tags then it compiles, but when it runs, it cannot be used, the input text fields are not accessible.

  Has anyone encountered this problem? What could be the possible reasons?

  Here's an example of how I embed fonts.

  [Embed (systemFont = "FreeSans", embedAsCFF = 'false', fontName = "FreeSansEmbed", mimeType = "application/x-font")]

  private var freeSansFont: Class;

  Thank you

  Ana

  I tried a long time ago and had some success (but I did day to 2.7 and 3.0, not directly to 3.0, don't know if this is important):

  http://blog.prevail.co.nz/2011/06/21/overlaying-air2-7-in-Flash-CS5/

  You can change the allocation of Java heap size and increasing the memory available to it often allows compiles to happen. Flash CS5.0 you can find this setting in this file:

  C:\Users\[your USER] \AppData\Local\Adobe\Flash CS5\en_US\Configuration\ActionScript 3.0\jvm.ini

  I have bolded en_US because obviously we English, change your language if necessary.

  Adjust the value-Xmx128m to-Xmx256m (128 MB-> 256 MB) and try that. You can also try to go to 512 m, but I had a few teething problems of the java virtual machine using a lot of ram (don't know why). This will increase the amount of RAM, the compilation process is allowed to use.