Allocation of memory - unlimited option resources

Similar Questions

• Reservation of memory from system resources

  I use monik part of backup tools, and there is a best practice to change the setting of the CPU and the memory at 1500 MHz and 800 MB.

  In the next page of VMware KB, there is a description to change the allocation of memory, only in ESXi 4.1, there is no material cofiguration option > memory.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003501

  But in configuration > system resource allocation, I can set the CPU and memory, is that the same allocaiton memory for the ESXi console?

  On this tab, we have generally fine tune the allocation of resources for this host. But this sentence anyone unless someone has encountered a problem. For the parameters of the ESX host we usually set the value in memory and CPU for the console of any third-party application or service that makes us turn on this host.

  In the case of ESXi, if big it seems people leave just as Norbert has asked to change by a seller of 3rd party app.

  Please refer to this article which contains details about the reservation of memory from system resources

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1012002

• Allocation of memory for a class system (avoid new/delete)

  My plugin has been crashing a lot, but only under Windows. I realized that the culprit is in my code for the creation of a bitmap GDI + drawing.

  The code I use is:

  ...

  Bitmap image * tempImg = NULL;

  try {}

  tempImg = new Bitmap (width, height, bitmap_bytes_per_rowL, PixelFormat32bppPARGB, reinterpret_cast < BYTE * > (bitmap_dataP));

  } catch (A_long & e) {}

  Return PF_Err_OUT_OF_MEMORY;    Assuming that...

  }

  If (tempImg! = NULL) {}

  canvas = Graphics::FromImage (tempImg);

  delete tempImg;

  }

  In this case, bitmap_bytes_per_rowL has been calculated before, and bitmap_dataP refers to the memory correctly allocated (via host_new_handle()) where the drawing will happen. tempImg is an object Bitmap GDI + Windows, that is only used to create the object Graphics "canvas." Once it has achieved its objectives, it will be deleted.

  I'm 99% sure that it is the cause of my crashes. It crashes all the time and it is more likely when the code is compiled in release mode.

  So, I have two options:

  -Allocation of memory for the Bitmap object using host_new_handle (sizeof (Bitmap)), and lock up the handle to get a pointer to my bitmap object. Problem, it is, how to initialize, because I will no longer use the keyword "new"?

  -Create my Graphics 'canvas' object without starting by creating a Bitmap object. That would be my preferred method, but the only other way to create a Graphics object is via an HDC and HWND, neither of which I know how to access and then how do I associate my (real) memory of drawing?

  Thanks for the tips!

  Christian

  what you are looking for is called a 'new place '.

  Bitmap image * somePointer = new (someMemoryAlreadyAllocated) bitmap.

  http://StackOverflow.com/questions/222557/what-uses-are-there-for-placement-new

• Allocation of memory in ESXi 3.5 problem

  Hello

  Before I switched to using ESXi 3.5 to host my VM guest, I used VMware Server 1.0.6 to the guest virtual machines. However, I think that

  the VMServer could not allocate correct memory that I specified in the virtual machine settings, for example, I put 3 GB of memory to a guest

  OS, but I found that only 1200 MB of memory was allocated in the ohter handler.

  So I now use ESXi 3.5 to host 3 VMs, ESXi 3.5 host has 8 GB of memory, two of these VMs have the allocation of memory 1 800 MB and 4 GB.

  However, on ESXi console, I found that me, the 'use of memory of comments' are only 450MB and 778 MB only.

  It's really out of my expectation, it seems that the memory on the VMware product management is the same.

  Does anyone know how fix memory use such as ESXi comments will not control the dynamic memory allocation?

  In our case, it is not necessary to adjust the consumption of memory intelligently by ESXi from time to time.

  I have attached some screenshots for your reference to screen and hope that the screens are useful to explain the problem.

  Thank you for your kind attention,

  Raymond

  It is possble to use memory locking of operating system invited in a fixed allowance?

  Is called memory reserve.

  You can do this under settings of the computer virtual (tab "resources") or by using the list of resources.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Disable BIOS memory caching options or shading

  HI - please help me!

  I have HP compaq Presario (windows xp)

  A blue screen appeared with the message today... for example disable or remove software - disable memory BIOS options such as implementing caching or shading

  error codes 0 X 00000043, 0XDFDA000, 0X000000C2

  I can't do anything because computer ELE will start not other than the basic options (I think that F8)

  What can I do?

  Thank you

  Ashana, repeat the process and choose DETRUCTIVE RECOVERY steps 5 or 7 that your running recovery.

  If your use of the recovery partition, it will be step 5

  If you use the discs it will be step 7

  http://support.HP.com/us-en/document/bph07145

  PS You can get more help by starting your own thread.

  Message edited by dmhoo29 on 02/26/2009 10:13

• allocation of memory for the pointer in the dll

  Hello

  I am very new to LabVIEW and I was struggling with the third scheduled dll long enough. I am able to configure the device (but with a view of the insufficient resources error code), get the number of connected sensors and the ID of the sensor. But I can't receive data between the device and I think it might be the memory allocation problem.

  I use LabVIEW 2015 32-bit on Windows 10.

  This is the documentation provided by the seller, and the apdm_ctx_t seems to be a void pointer based on the API (typedef Sub apdm_ctx_t)

  APDM_EXPORT apdm_ctx_t apdm_ctx_allocate_new_context (void)
  Allocates memory a handful to be used by the libraries of the apdm.
  Returns
  Zero on success, zero otherwise

  Based on a previous post, I set up the return of the function above to be signed pointer size whole. And the following functions will receive this digital context and pass by value.

  In the attached png, the apdm_get_next_record requires a complicated structure. I have to do as a cluster and supply the function node (see figure).

  The sequence of the vi follows the Matlab code provided by the seller. I have no idea why the vi keeps returning the error code: no data received.

  Any thoughts would be great and I can give you more information if necessary. Thank you!

  Looking briefly at the provided code that I don't see glaring errors. Are you really sure that you do not have misinterprete all return as failuree values or maybe something in your actual System Setup prevents you to get the values you expect?

  You haven't really explained what you think you should get and what you get instead. The matlab example only also shows the use of apdm_ctx_autoconfigure_devices_and_accesspoint5() while you use apdm_ctx_autoconfigure_devices_and_accesspoint4() which I guess is not a big problem, as the example of Matlab is that pass an additional parameter to 0 to the function. However this example shows quite how you're supposed to call apdm_ctx_get_next_record() and then calls apdm_exit() to the end as you do anywhere.

  For now, it seems more a problem with the use of the functions of your DLL in the decree that something that should be fixed in nodes of library call to access your DLL and correctly. A suggestion to improve the screw, you have now would be to actually do the appropriate error handling. for now, these functions have nothing to do with the return value of functions. The right way would be to check the documentation and if a function returns or the return parameter can indicate an error for actually cause the error cluster spread a significant error code endorsements. And all functions except those which is intended to release all resources must have a business structure that incoming error, does nothing and doesn't send the error through.

  But don't blindly assume that, since the function 1 return 0, not for a mistake that all other functions are too. Some might actually return the number of resources found or whatever with 0 to indicate an error or no resources.

• Allocation of memory and CPU

  Guys,

  My question may sound trivial, but I need it to be clear.
  If I allocate a certain amount of RAM and CPU (without reservation) on some VMS, if virtual machines are not fully allocated amount, is used by other virtual machines.
  I am asking that more I VCOPs reports with a lot of oversized VMs and I also I know I must take measures to reduce the overhead of each virtual machine, I need to know if the memory and CPU are shared dynamically in case of needs of other virtual machines.

  Thanks in advance.

  Daniele

  Short answer Yes, if no reservation is defined, resources are allocated dynamically.  In case of contention, actions values will be used for the allocation of resources.  Virtual machines with lots of unused memory are taxed (income tax slowed) and claimed in a balloon.  The important thing is to know what the VM workload is running, and if VMs are memory aid for the contents of the cache, it is to say sql or exchange and these may consider oversized VMs.  Monitor the virtual machine during the period during the normal business cycle and the size of your virtual machines accordingly.

• Adjustable memory for NB550D resources

  So after upgrading the memory in my NB550D to a module of 4 GB (3 GB usable) steals the netbook, but I noticed the HD 6250 graphics uses 1 GB of memory for himself, obviously such a graphic of a budget entry has not even need half of this sum, especially that the screen is only 1024 x 600 , so if an admin is to check this, I wondered if in a future BIOS, an option could be added to adjust the amount of GPU memory?

  I'd rather have the GPU using approximately 256MB and rest in the direction of memory system, it does not require as much memory.

  Hey,.

  Who knows if Toshiba released a BIOS where you can adjust the graphics memory but such a function isn't known to me and I doubt it will happen.
  The memory of the graphics card will always be controlled automatically and there is no value that you can change.

  I mean that even 3 GB of RAM is really enough for performance netbook and I doubt you need more RAM and even some programs need more RAM you can use the virtual memory on the HARD drive.

• allocation of memory for a LStrHandle

  Hello

  I know that this thing about memory allocation and LStrings has been much already posted but I couldn t find the answer to my question.

  Currently I am working with an external code (c ++) and calling a function of vi.

  I want normal c ++ channels:

  (1) declaring normal c ++ string

  (2) conversion c ++ string in a Lstring + pass it as Lstringhandle (this works very well!)

  (3) initialize a Lstrhandle for my result (it would work very well if I knew that the length of the resultant Lstring! but because the application is set to call ANY function of vi I don't know what the function and so I do not know the length of the result string)

  My problem is really basic, but how do I get the actual length of the modified LString?

  Let´s tell my function of vi concatenates 2 strings and returns the result, then the signature of my vi-function should look like this:

  void __cdecl Concat (LstrHandle * string1, LStrHandle * string2, LStrHandle result);

  at some point, so I need to know the length of the result.

  Any ideas?

  (it is important that the strings are Lstrings and they are passed as pointers!)

  I've tried usinig labviews functions of manager, but this won't work for all of the problem this toddler is integrated.

  I appreciate the ideas and help!

  Thank you...

  Gabriella_ wrote:

  Hello

  void __cdecl Concat (LStrHandle * string1, LStrHandle * string2, LStrHandle result);

  at some point, so I need to know the length of the result.

  If your function receives the string1 and string2 as input and returns the result, then the first two by reference and by value, it seems quite a bit back.

  Because string1 and string2 are entered, the function is supposed to use, they must be defined and allocated in any case properly by the appellant. But for output handles passed by reference, it is quite valid in LabVIEW since on version 6 to pass a NULL handle and LabVIEW code takes care of allocating a new handle in this case.

  So basically if you declare your function like that when, you create your LabVIEW DLLS:

  void __cdecl Concat (string1, string2 LStrHandle, LStrHandle LStrHandle * result);

  It is quite valid to call this function like this in your C code:

  LStrHandle string1; initialization of a string

  LStrHandle string2; initialization of a string

  Result LStrHandle = NULL;

  Concat (string1, string2, & result);

  and the result will contain a valid string descriptor on successful return.

  If the output parameter is declared by the value, then you obviously can't pass in a NULL handle because the function has no way to return a new handle. Then, you will indeed need to allocate an empty descriptor like this:

  LStrHandle result2 = (LStrHandle) DSNewHClr (sizeof (int32));

  This allocates a handle with the place for the numElm value and initializes it to 0.

• Allocation of memory ring LabVIEW animation photo

  I create an animation in labview, I have 1,000 images that I need to go, I use a pict ring and flipping through images... problem is after loading about 200 images (they are 20 k each) my computer to throw in the towel, the RAM is full virtual RAM could be full... I wonder if there is a work around around that?  Any kind of way to manipulate memory so I can finish?  Maybe it's more of a thing of computer a thing of LabVIEW... I thought, if I increase my virtual memory of slots "a lot" and say LabVIEW is not to use e RAM just use virtual memory that maybe I would be able to continue, but I don't know if this is possible or how to make it... any suggestions or advice?

  Thank you very much!

  PS - I realize that there are other programs that are well adapted to this and what LabVIEW is really not the animation software, but I use LabVIEW for this and I am lookin to get advice whether or not this task is possible in LabVIEW. Thank you.

  I would advise not to use the ring of the photo, if it is because it is not very convenient.

  You can use the image control, allowing you to read and display the PNG images one after the other (using the screws in the palette of the image) and here you have two options:

  1. Read the files one at a time. Could be a problem if you do it quickly and repeatedly, it will solve problems of memory, you may have.
  2. Read files at once and keep them in memory. Note that the image control is not any compression, so the actual size of an image in RAM would be PIXELS x 3 bytes (or x 1 byte and a bit, if you have a color depth of 8 bits), so the amount of RAM depends on the size of the image. For a 200 x 200 image, this should be 120 KB, assuming that I did my calculations correctly.

• Number of allocations of memory of hexadecimal string

  I am convert a string to a byte array and then converting this array of bytes into a hexadecimal table using the built-in primitive like this

  

  What is the best way for a performance? When I run the DETT I see multiple memory allocations. I think that one for each element of the array. I think it has to do with the point of constraint. Also, it happens only if I connect to the chain of the indicator. If I run this without the indicator chain I don't see not all memory allocations. (Perhaps LabVIEW do not know the code because I don't do anything with the result)

  I just got the DETT and I'm not very sure of how LabVIEW allocates memory. But I do a test by running this code

  

  I see not all memory allocations in the DETT as I do with the number of hexadecimal string.

  
  

• Win 8 consumer overview allocation of memory

  I installed Win 8 in VM Player 4.0 on a laptop of HP under Win 7 Professional 32-bit with 4 GB of ram. (Yes, I know that Win 7 32 bit can only use 3 GB of ram).

  I initially allocated 2 GB ram (Max recommended) to win 8 and it ran OK, but there seems to be a lot of beating HD (HD swap?) past. I have reset the settings of virtual computer to allocate only 1 GB (recommended) to win 8 and it seemed to work much better. less derouillee and more rapid response when running win 8.

  So the question is: why to win 8 runs faster with less ram?  Is that because it uses only the "excess" 1 GB of ram that does not use Win 7? When I got the 2 GB allocated, he fought with Win 7 for memory space?

  > So the question is: why to win 8 runs faster with less ram?

  This is normal - each VM will go faster if you assign as little RAM if necessary

• Script for the allocation of memory of VMGuest and use

  vSphere 5 is around the corner and we need to adjust and optimize the use of our 1500 vRAM ~ VM, where a couple are certainly empowering.

  
  So, I'm looking for a script to analyze the allocated, consumed and active (highest peak in the past 1 year) guest unique virtual machine memory...
  Could someone help me?

  Take a look at my post to discover the overallocations memory .

• Allocation of memory in vmware workstation

  I'm new to vmware.  I have a server I'll test this on.  I have a Server Windows 2008 R2 with 4 GB of memory.  If I install vmware workstation on it and install a virtual machine Windows XP with 1 GB of RAM allocated to it, does this mean that when the virtual machine is running the XP virtual machine has 1 GB of memory to use the host (Windows 2008) system will have 3 GB for himself to use?

  Thanks for any advice in advance.

  If your virtual machine is fully using the 1 GB or RAM, then Yes, you are correct - but remember that Workstation is just an application that runs on your server, so if the virtual machine does not all allocated memory, the application will require all this memory and so you will have more memory available for the physical host.

• Comments XP not recognize new allocation of memory and hard disk size

  I'm under Fusion 3 on a new IMac 21.5 "running 10.6.1 with 8G of RAM with XP SP3 guest.  Just migrated since late 2006 MacBook 2.06 merger to help Mac running migration wizard, then upgraded to Fusion 3.

  Main problem is that when I updated to the size of the hard drive of 40G per 100 G and changed the memory allocation of 2G to 6G, Windows operating system does not change.  Windows reports 3G memory and 40G hard drive.

  Other questions:

  OS (or VMware) is also unstable and crashes, sensitive sentence without indicating CPU heavy and sometimes does not restart, requiring force to leave.  Usually, will run 30-45 minutes before crash. One application I run is Revit 2010 (which is also unstable, has just installed service release 2).

  Tried to install new comments, but get the message "No boot device" - seen a thread for this and create the ISO image.

  David: I can't help you with the RAM, but I had the same problem when I expanded my virtual HD 20 GB to 30 GB.  Windows XP always thought 20GB and called the rest "unallocated space".

  There is a beauty of a freeware program called Easeus Partition Master - http://download.cnet.com/Easeus-Partition-Master-Home-Edition/3000-2248_4-10863346.html?tag=mncol%3bpop&cdlPid=10982635.  Run on the Windows side (at least it worked for XP) and it should show 2 discs.  Highlight the one you want to extend, click on (expand / resize), drag the divider to full size of HD and then 'apply' and he has done the partition in about 5 seconds for me.  Problem solved.

  John