Allow outgoing SIP URI dial on the TMS system Type: room

Hello

I ve added a VC-end point unsupported to the TMS with system Type: room.

If I check the planning parameters on MSDS for this endpoint, I see that I can only plan entering, but not outgoing calls.

We´re with the help of BBFRR and if I book this endpoint in a Multipoint meeting, I get an error of TMS routing, because the outgoing call missing clearances characteristic.

Is there a way to activate the planning coming out for this type of endpoint?

Is it possible to configure the device manually type for example in the MXP880 to get the outbound features?

Is there maybe a flag in the comic book, were I can define the type of device manually?

Thank you

Tino

System of 'room' type is intended for endpoints that TMS does not support, but which can be saved to the guardian or register SIP (and therefore be composed by any other endpoints). MSD cannot control endpoint, it cannot force the end point to dial a number to someone, but logical routing TMS allows incoming calls, because it assumes that the doorman / SIP registrar can route calls to it.

Makes sense?

Tags: Cisco Support

Similar Questions

  • Configure SIP URI dialing

    Hello

    I tried to activate the SIP URI dial, unfortunately with no success yet. Here you can see what I've done, maybe one of you can tell me what is missing:

    • Set up the LDAP synchronization, assign msRTCSIP-PrimaryUserAddress URI directory (because of the interoperability of Lync)
    • DNs associated with devices of CSF and BOT
    • Associate the URIs directory with directory numbers
    • The "phones" partition of directory URI alias value
    • Modify a SIP profile (named Jabber) later
      • Define interpreting string dial with 0-9, *, # and +.
      • Use the FULL domain name in the SIP application
      • Allow the presentation of bfcp
    • Assign the profile Jabber SIP devices CSF and BOT
    • Set the DNs route partition as an alias of the directory URI (phones)
    • Jabber - config.xml and change download
      • msrtcsip-primaryuseraddress in section of the book
      • true in section strategies
    • Restart the tftp server and re - open a session with Jabber

    We have 9.1.2.11900 - 12 Call Manager Server Instant Messaging and presence 9.1.1.10000 - 8 and 9.6/9.7 Jabber clients.

    Is there anything I missed or misconfigured?

    Thank you

    LACI

    Hi Labelle,

    If you put DirectoryURI in the uri section directory publication is no longer available in the client.

    Of the documentention, I got that it belongs to the policies. But if I put it here my click to call URI is always the address e-mail and not msRTCSIP-PrimaryUserAddress. So I'll do some research here.

    One thing I found is the resolution of contact section. If I signed to jabber my name did not appear. Instead, it was my msRTCSIP-PrimaryUserAddress.

    To resolve this problem, you will need to add this to jabber - config.Xml.

    true
      msRTCSIP-PrimaryUserAddress
      SIP:

    Kind regards

    Paul

  • Adding the Polycom HDX to the TMS system

    How can I add a Polycom HDX system in TMS to manage?  What, if any configuration on the Polycom system must be made, or in the TMS?  Can't seem to find any documentation about it.

    http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/interoperability/Cisco_TMS_Product_Support.PDF

  • How can I get the installer for my application check the operating system type and then install the correct driver type?

    I have a request that I wrote and have been use and distribute for awhile. The installer I created for this application is an additional installer to install a driver for the USB connection. The USB connection is actually a virtual COM Port. The problem is that the people who drafted modified driver setup the installation program itself. They used to have an installer that would check for 32-bit or 64-bit OS and then install the appropriate driver.

    Now, they have two distinct installation programs: one for the other for 32-bit and 64-bit. They let the user know their OS and install the appropriate driver. I'd rather not have to rely on my users to do. From what I've seen the creater Installer provides that an executable to be run after the application installs.

    Is it possible to have the installer of the application, check the type of OS and then run the correct executable file after installing my application? I think that I could write an Installer 'wrapper' that checks the type of operating system then executes the correct Installer. But I expect a better solution.

    Thank you
    Joe

    So, I make it work!

    The trick is to find a way to determine what type of OS you are using. The method I used was, indeed, read the environment variable. A buddy of mine sent me this link:

    http://StackOverflow.com/questions/2401756/how-to-find-if-the-machine-is-32bit-or-64bit One of the phrases he bibliography the Processor_Architecture environment variable.

    It seemed like a reasonable idea. So I started to research how read LV it environment variables turns out, you do it by reading a registry key. There is an example of LV on how to read a registry key. But I did not know where they are in the registry. So, I searched the Processor_Architecture registry. I found it in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment.

    According to the article in the link, this value will already be x 86 for a 32 bit OS, or something with 64 inside. I just check the response for x 86 string. If it is, I just run the x 86 version of the driver Installer. Otherwise, I run the x 64 version.

    It turned out to be as simple as that.

    I hope this helps someone.

    Joe

  • TMS conference scheduled automatically connect via CCT and TS do not work whit SIP URI

    Hello

    For now I'll set up a new infrastructure of CMR. All components of telepresence have the lates software. CUCM 10.5.2.

    -MX and SX endpoints are recorded to the CUCM

    -CUCM a SIP trunk to driver

    -Ad.Hoc conferences and Rendezvous work

    -TS is managed by the conductor

    -MX and SX Endpoints, conductor and TS have been added to the TMS

    Now the problem. I'll put up a new conference at the TMS and the driver will be added automatically. Now I start the Conference and the conductor trying to call the endpoints of Pentecost sip uri format and the call fails. I thought that the driver uses the trunk for appointment in order to dial a number to cucm. CSS entering the CUCM site has been configured. Do I need something special on the driver or TS? In conclusion called Pentecost this format + 55228713030 fine work and call the Pentecost sip uri [email protected] / * / fail.

    They have a few clear example of aliases and auto dial configuration for this conference?

    If you have need of newspapers or something else made me know.

    Is there a way you can use a FULL domain for the domain part of the address that represents CUCM?

    Conductor is by adding the address of the place of CUCM configured under configuration Conference > locations.  I don't know the conditions, but it's because tenayo is not a field is full, or it is not routable.

  • After adding a subscriber to the CUCM, Sx20 Sip URI field empty cluster

    Hello

    After adding a subscriber to CUCM Cluster, all the restarted cluster devices, then sip uri field sx20 features seemed to "Null", simply enter the SIP registrar one by one for all devices sx20 IP.  Anyone else facing this problem? In my view, is not normal behavior.  What are the causes of this problem? Waiting for your opinions.

    CUCM system version: 9.1.2.13057 - 1

    The SX20 software version: TC7.2.0.aea6651

    //

    Thanks in advance

    Hi Dani

    Greetings of the day!

    Ideally this should not take place. I suspect this is something at the end of Manager at the origin of the problem.

    You make changes to the device pool after adding Subscriber to CUCM Cluster?

    Modifications were made to the Group Manager call?

    Replication between the call manager Publisher and Subscriber is any good?

    The SX20 is supplied by TMS devices?

    You should check the logs of provisioning of the endpoint to enter the cause for it.

    Concerning

    Radhika Sajan

  • Duplication of the SIP URIs with prefix GW

    Hello Techies,

    I recorded an ISDN gateway with VCS control with prefix 7. So, when the user wants to dial call ISDN, it includes 7followed by number and call routes to the ISDN gateway which bands of 7 and sends the call to the public network.

    However, when the same user dials SIP URI [email protected] / * /, instead of going to VCSexpressway call, he goes to the ISDN gateway.

    How can I work around this problem?

    thnx

    -wala

    Wala Hi, welcome to the Cisco support community!

    You should implement a dial in VCS who avoid that kind of shift. I don't know what rules of research and transformations that you configured, but here are some points you should consider:

    1 - alias [email protected] / * / not must be sent to the local VCS control, if this happens, you probably have a search rule 'any alias' that points don't localZone.GetDaylightChanges, that is not correct, you must create specific search models rules correspond to your alias of local endpoints registered

    2. with regard to the ISDN gateway, you should have a search rule specific to the call of the road to ISDN. For example, SIP endpoints reached ISDN, you should have a rule of research pointing to localZone.GetDaylightChanges whose model is (\1 7\d +) @localdomain.com and replace. This remove only the domain part of the URI and send only the 7XXXX recorded localZone.GetDaylightChanges ISDN bridge. In this case, I am assuming that you have a transformation with the model ([^ @] *) and replace-[email protected] / * /. If you have not this turn, you must create a different search rules to match route endpoints H323 ISDN dial only the number, it would be something like this: 7\d + and route to the local area.

    3 - Furthermore, when the creation of roads, prefer to use regex strings of preffix and suffix, regex is the best option to avoid the incompatibility of numbering plan. Rather than use the prefix 7, use regex 7\d +. For example, the prefix 7 Games [email protected] / * /, but 7\d regex + does not work.

    4 - there is an important thing to consider when registering gateway ISDN to VCS, especially when you have VCSe. You must implement a free fraud prevention mechanism in order to avoid external users to use your system as a free phone system. You can do this by using the strategy to call him; or using the rules of search + authentication + subzones. You can take a look at this thread:

    https://supportforums.Cisco.com/message/3971947#3971947

    I hope this helps.

    Paulo Souza

    Please note the answers and mark it as "answered" as appropriate.

  • Change caller id / name of the SIP URI of VCS calls

    Hello

    I have clusted CUCM 9.1 with a SIP to a VCS - C trunk.  When making calls, the calls show a caller id of [email protected] / * / address, for example [email protected] / * /.  I have a configuration URI directory on the phone that generates the call, but now it shows the URI.  Incoming calls from SIP URI properly.

    Thank you

    Hello

    On the trunk SIP for VCS, under outgoing calls, there should be an adjustment: vocation and connected part format, change it to URI deliver only partially connected. Also, under the profile SIP assigned to the SIP trunk to VCS, there should be a setting use entirely field in queries, check this box. The SIP profile should also be attributed to the device SIP calls.

    HTH, if yes, please rate.

  • Problem with the commissioning of Web check-in and ASK when swicht to the TMS Provisioning extend mode

    Hi, I need help please, because I have no contract and I cannot open a TAC case.

    I have the following two issues:

    1. when I do the tms extension preparation mode switch as stop working sip calls, I get the following error of internal and internet scenarios for my internal network:

    VCS-e when the call is the Internet to the internal network

    2013-09 - 05T 11: 50:38 - 04:30

    "" "" "" "TVCS: event = 'Search is complete" reason ="authorization not valid - insufficient privilege" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7449"Dst-alias-type ="H323"Dst-alias ="anthony_accardi"call-number ="1a069dfa-1647-11e3-86f9-0010f328943a"Tag ="1a069f44-1647-11e3-b22f-0010f328943a"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:20:38, 670"

    VCS - c when the call is internal network to the Internet:

    2013-09 - 05T 11: 53:31 - 04:30

    "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ="812a52e2-1647-11e3-93c9-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:31, 687"

    2013-09 - 05T 11: 53:31 - 04:30

    "" "" "TVCS: Event = 'research has attempted" Service ="H323" CBC-alias-type = "E164" CBC-alias ='7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ='812a52e2-1647-11e3-93c9-0010f325da04" detail = "searchtype:ARQ" Level = "1" elements UTCTime ='2013-09-05 16:23:31, 680"

    2013-09 - 05T 11: 53:23 - 04:30

    "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="7c9181c4-1647-11e3-bda8-0010f325da04"Tag ="7c918304-1647-11e3-865b-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:23, 974"

    BUT WHEN THE MODE IS AGENT LEGACY TMS ALL THE CALL WORKS FINE

    2 when I switch I can tms mode of preparation I can do internal network equipment supply but not from the outside and this worries me more is the jabber that being Internet I get the following error:

    013 09 - 05 T 11: 07:42 - 04:30

    "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 263"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"

    2013-09 - 05T 11: 07:42 - 04:30

    "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Dst - ip ="192.168.0.252"Dst-port ="25084"
    SIPMSG:
    | SIP/2.0 401 Unauthorized
    Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
    Call ID: [email protected]/ * /.
    CSeq: 38570 OPTIONS
    Starting at: ; tag = 21e96c96b3f9a439
    To: ; tag = ba0e03ca2f6b3957
    Server: TANDBERG/4120 (X7.2.1)
    WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b40cb8278b4a11da992154324161d566d2b57bac3d83c5c518c4528c790d", opaque = "AQAAAN1NC9IHdFS3kNJ3Q6UX2JiBXhut", stale = FALSE, algorithm = MD5, qop = "auth".
    Content-Length: 0

    |

    2013-09 - 05T 11: 07:42 - 04:30

    "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Dst - ip ="192.168.0.252"Dst-port ="25084"detail ="sending = 401, method = OPTIONS, To = sip response Code: 192.168.0.250:7001, [email protected] / * /"

    2013-09 - 05T 11: 07:42 - 04:30

    "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Src - ip ="192.168.0.252"Src-port ="25084"
    SIPMSG:
    | Sip OPTIONS: 192.168.0.250:7001; transport = tls SIP/2.0
    Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
    Call ID: [email protected]/ * /.
    CSeq: 38570 OPTIONS
    Starting at: ; tag = 21e96c96b3f9a439
    TO:
    Max-Forwards: 0
    User-Agent: TANDBERG/4120 (X7.2.1)
    Support: com.tandberg.vcs.resourceusage
    Content-Type: text/xml
    Content-Length: 250

    25075024960|

    2013-09 - 05T 11: 07:42 - 04:30

    "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"

    2013-09 - 05T 11: 07:36 - 04:30

    "" "" "TVCS: elements UTCTime = '2013-09-05 15:37:36, 757" Module ="network.tcp" Level = "DEBUG": Src - ip = "10.10.10.1" Src-port ="10191" Dst - ip = "10.10.10.10" Dst-port ='5060"detail = 'TCP connection is closed"

    2013-09 - 05T 11: 07:36 - 04:30

    "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level ="DEBUG": Dst - ip ="10.10.10.1"Dst-port ="10191"
    SIPMSG:
    | SIP/2.0 404 not found
    Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191; DefaultZone = ingress-box
    Call ID: [email protected]/ * /.
    CSeq: 301 SUBSCRIBE
    From: <> [email protected] / * />; tag = 2991aa56d191ede3
    To: <> [email protected] / * />; tag = c4114db76ace49d8
    Server: TANDBERG/4120 (X7.2.1)
    WARNING: 200.11.230.253:5060 399 'political response '.
    Content-Length: 0

    |

    2013-09 - 05T 11: 07:36 - 04:30

    "" "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level = 'INFO': Dst - ip ="10.10.10.1"Dst-port ="10191"detail = 'send = 404, method = SUBSCRIBE, To = sip response Code: [email protected] / * /, [email protected] / * /"

    2013-09 - 05T 11: 07:36 - 04:30

    "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 638"Module ="network.sip"Level ="DEBUG": Src - ip ="10.10.10.1"Src-port ="10191"
    SIPMSG:
    | Sip SUBSCRIBE:[email protected] / * / SIP/2.0
    Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191
    Call ID: [email protected]/ * /.
    CSeq: 301 SUBSCRIBE
    Contact: <> [email protected]/ * /: 2379; transport = tcp >
    From: <> [email protected] / * />; tag = 2991aa56d191ede3
    To: <> [email protected] / * />
    Max-Forwards: 70
    Directions:
    User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows
    Expires: 300
    Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1
    Accept: application/pidf + xml
    Content-Length: 0

    The setup I have is:

    Configuration on VCS Expressway:

    TMS Agent Legacy mode

    Search rule:

    local area-no domain

    Any

    Any

    NO.

    Alias matching

    Regex

    (. +) @domain.com. *.

    Replace

    Continue

    LocalZone.GetDaylightChanges

    local area full URL

    Any

    Any

    NO.

    Alias matching

    Regex

    (. +) @domain.com. *.

    Leave

    Continue

    LocalZone.GetDaylightChanges

    Search of covered area rule

    Any

    Any

    NO.

    Any alias

    Continue

    TraversalZone

    Search for DNS zone rule

    Any

    AllZones

    NO.

    Alias matching

    Regex

    (?. *@%localdomains%.*$).*)

    Leave

    Continue

    DNSZone

    Transform

    Transform the alis destinations to URL

    ([^@]*)

    Regex

    Replace

    ------[email protected] / * /

    Presence PUA - on

    Presence server - off

    CONTROL VCS:

    TMS Extension commissioning of fashion

    Search rule

    local area-no domain

    Any

    Any

    NO.

    Alias matching

    Regex

    (. +) @domain.com. *.

    Replace

    Continue

    LocalZone.GetDaylightChanges

    local area full URL

    Any

    Any

    NO.

    Alias matching

    Regex

    (. +) @domain.com. *.

    Leave

    Continue

    LocalZone.GetDaylightChanges

    Search of covered area rule

    Any

    Any

    NO.

    Any alias

    Continue

    TraversalZone

    External IP address search rule

    Any

    Any

    NO.

    Any IP address

    Continue

    TraversalZone

    Transform

    Transform the alis destinations to URL

    ([^@]*)

    Regex

    Replace

    ------[email protected] / * /

    PUA - on

    presence server - on

    I do not have political appeal hace

    Please help me to see what I'm missing or what's wrong?

    Thankss

    Hello

    Ok. Are you saying that VCSe uses the IP address 10.10.10.10 in interface external, right? Of course, what the IP address of 200.x.x.x? It's your VCSe NAT IP address, right? What is this configured in VCSe?

    Well, reaally you have a problem of NAT. look at the SUBSCRIPTION message of jabber to VCSe:

    SIPMSG:

    | Sip SUBSCRIBE:[email protected] / * / SIP/2.0

    Via: SIP/2.0/TCP 201.210.116.201:3612; branch = z9hG4bK138dca6bf6cdd458588900dbaf7b45f4.1; received = 10.10.10.1; rport = 9368

    Call ID: [email protected]/ * /.

    CSeq: 301 SUBSCRIBE

    Contact:

    From: [email protected] / * />; tag = 1e82c817dc3224d5

    In: [email protected] / * />

    Max-Forwards: 70

    Directions:

    User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows

    Expires: 300

    Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1

    Accept: application/pidf + xml

    Content-Length: 0

    Do you see? If the Red 192.168.41.205 IP address is the IP address of your router/nat, then you can come to the conclusion that your router is inspection/ALG, it puts its own IP address in the SIP headers. Your router/firewall device should not use any function ALG/inspection, otherwise you will have problems.

    I can say with great confidence, VCSe rejects the message SUBSCRIBE "404 not found" response because VCSE does not recognize this IP address in the field 'road', 192.168.41.205.

    In addition, the configuration of your NAT is not recommended. First, you use the port-based NAT (PAT), in fact, you must use a NAT. Second, when your NAT firewall allows VCSe, the source address is 10.10.10.1, which means that your firewall is NATing the source address and destination address not only. This type of NAT, it is not recommended for h.323/SIP applications.

    Well, don't be angry with me, I try to help, but I need to say, your deployment VCSe is almost completely false, there are a lot of blind spots.

    I suggest reviewing and reconfigure your deployment following this guide:

    http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

    I hope this helps.

    Concerning

    Paulo Souza

    My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

  • Supported SIP URI characters

    Hello

    I'm currently setting up interoperability between Cisco control VCS X7.1 and CUCM V7.1.3.

    The IPT dial plan consists of site prefixes and area codes that make up the full DN phones, this unique name is also starts with a #.

    For example #0044014761

    My problem is (I think), that # is a character in charge of SIP URI that is exposed in the deployment guide. I tried to use 35%, which is the ASCII value for #; Oddly enough, when you use that I can solve the alias against the CUCM SIP trunk, but when you attempt to dial for an endpoint, it fails.

    I know that my SIP trunk is OK, as I can carry 9.* by it on the break-out CUCM PSTN calls.

    Anyone encountered this problem before, or been able to work around it?

    Thank you, if

    Sent by Cisco Support technique iPhone App

    For your reference, it was similar (quite well) discussion there, a month

    https://supportforums.cisco.com/thread/2152374?tstart=210.

  • Jabber the dial in the conference on MSDS

    Hi all.

    My system has:

    • TMS
    • Conductor
    • Telepresense Server
    • CUCM

    My TMS can schedule a conference and then dial a jabber client, but jabber client cannot dial in the room.

    On MSDS, I configured the Room ID: 898 X.

    On CUCM, I configured SIP trunk on driver ground and route 898 X driver.

    Are - that no one knows why?

    What TMS version are you running?

    In TMS 14.6, they introduced an option with conductor: 'limit Ports to the number of expected Participants.  It is under the extended parameters of the driver in the TMS, make sure is disabled, or as mentioned by Michel, add a dial by attending the Conference planning.

  • Join the URI from outside the network

    Hello

    I have a problem to make a call from outside the network of phones internal using URI.

    If I test a call from outside (with Jabber video) to my URI ([email protected] / * /), highway E logs show:

    TVCS: event = "Call rejected" Service = "SIP" Src - ip = "IP address" Src-port = '5060' type-aliases-Src = Src-alias "SIP" = "sip:[email protected] / * /" Dst-alias-type = "SIP" Dst-alias = "sip:[email protected] / * /="Call-serial-number="aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeee" Tag "zzzzzz-Davis-0000-1234-xxxxxxxxx" detail = 'Not found' Protocol = "TCP" response code "404" = Level = '1' elements UTCTime = "2015-06-15 13:26:03, 214"

    If I check the call history, I see that my test call is not crossed:

    Source: sip:[email protected] / * /

    Destination: sip:[email protected] / * /

    Type: Non-traversal

    Protocol: SIP H323<->

    Status: 404 not found

    Step 1
    Area band bandwidth default node
    Alias 1 SIP of source:[email protected] / * / (Url)
    Target alias 1 sip:[email protected] / * / (Url)
    SIP protocol
    Address AAA. ABM CC. DD:5060
    TCP transport
    Not found a reason
    Cause 404

    Step 2
    Crossed bandwidth of Zone node (server)
    Target alias 1 sip:[email protected] / * / (Url)
    SIP protocol
    Address AAA. BBB. CCC. D:25793
    TLS transport

    Step 3
    Crossed bandwidth of Zone node (server)
    Alias target 1 [email protected] / * / (H323Id)
    H323 Protocol
    Address AAA. BBB. CCC. D:1719
    Unsaved pattern
    Destination not found cause

    My configuration:

    * X VLAN: CUCM 10.5 10.5 unit, 10.5 CUPS, ExpressWay C X8.5.1, highway E X8.5.1 (1 of 2 network adapter), DNS server, ad server

    * VLAN DMZ: highway E (the second network card)

    * Outside: External DNS

    (1) ExpC

    (a) areas

    Name Type Calls Bandwidth used Status of H323 SIP status Status of search rule
    DefaultZone Default zone 0 0 kbps On On  
    CEtcp-[CUCM_PUB_IP] Neighbor 0 0 kbps Off Assets The search rules permit: 1
    CEtcp-[CYCM_SUB_IP] Neighbor 0 0 kbps Off Assets The search rules permit: 1
    Neighbor CUCM Neighbor 0 0 kbps Off Assets The search rules permit: 1
    Covered area (client) Customer journey 0 0 kbps Assets Assets The search rules permit: 2
    Covered area (UC) Unified Communications crossing 0 0 kbps Off Assets No rule search configured

    Jabber works both inside and outside.

    Details

    Name: Nearby CUCM
    Type: neighbor
    Hop count: 15
    H.323 Mode: Off
    SIP mode: on
    Port: 5062
    Transport: TCP
    Accept records submitted by proxy: enable
    Media encryption mode: Auto
    Support of ice: Off
    Authentication policy: do not check the credentials
    Trust of SIP authentication mode: Off
    Peer 1 address: CUCM_PUB_IP (-online green)
    Address of the peer 2: CUCM_SUB_IP (-online green)
    Profile area: custom
    Monitor the status of peers: Yes
    Call signalling routed mode: always
    Automatically respond to the H.323 research: Off
    Automatically respond to the SIP research: Off
    Send empty INVITATION of interoperability calls: on
    The poison SIP mode: Off
    Encryption of SIP mode: Auto
    Mode SIP REFER: forward
    Limit mode line SIP SDP attribute: Off
    Length limit of SIP SDP attribute line: 130
    Band MIME multipart SIP mode: Off
    Band of SIP UPDATE mode: Off
    Interworking SIP research strategy: Options
    SIP UDP/BFCP filter mode: Off
    SIP UDP/IX filter mode: Off
    Duo SIP video filter mode: Off
    Address record SIP road type: IP
    Proxy SIP-require header band list: white

    Name: Covered area (client)
    Type: Customer journey
    Hop count: 15
    H.323 mode: on
    Protocol: enforcement
    Port: 6001
    SIP mode: on
    Port: 7003
    Transport: TLS
    TLS check mode: Off
    Accept records submitted by proxy: enable
    Media encryption mode: Auto
    Support of ice: Off
    The poison SIP mode: Off
    Authentication policy: do not check the credentials
    Customer settings stimulus interval: 120
    Peer 1 address: ExpE_IP (-online green)
    Address of the peer 2: expe.mydomain.fr (-online green)

    Name: Trasversal area (UC)
    Type: Course Unified Communications
    Hop count: 15
    User name: qwerty
    Password: *.
    SIP port: 7001
    Accept records submitted by proxy: enable
    Support of ice: Off
    The poison SIP mode: Off
    Authentication policy: do not check the credentials
    Customer settings stimulus interval: 120
    Peer 1 address: expe.mydomain.fr (-online green)

    (b) research rules

    Priority Name of the rule Protocol Source Authentication required Mode Type of rehearsal Pattern string Behavior model On match Goal
    45 CEtcp-CUCM_SUB_IP FT3 Any NO. Alias matching Prefix CUCM_SUB_IP; Transport = TCP Leave Stop CEtcp-CUCM_SUB_IP
    45 CEtcp-CUCM_PUB_IP FT3 Any NO. Alias matching Prefix CUCM_PUB_IP; Transport = TCP     CEtcp-CUCM_PUB_IP
    50 LocalZoneMatch Any Any NO. Any alias       Continue LocalZone.GetDaylightChanges
    100   Any Any NO. Any alias       Continue Covered area (client)
    100   Any Any NO. Any IP address       Continue Covered area (client)
    100   Any Any NO. Alias matching Regex (3\d{3})@mydomain.fr(.*) Leave Stop Neighbor CUCM

    (c) changes of

    Change the destination to the URI format alias
    ([^@]*)
    Replace
    ------[email protected] / * /

    CUCM IP to the domain
    Regex
    (. *) @(AAA\.) BBB\. CCC\. D | AAA\. BBB\. CCC\. D)((:|;).*)?
    Replace
    ------[email protected] / * /\2

    Convert domain Unified CM provided until highway information
    Regex
    (4\d{3})@expc.mydomain.fr(:.*)?
    Replace
    ------[email protected] / * /

    (2) experience

    (a) areas

    Name Type Calls Bandwidth used Status of H323 SIP status Status of search rule
    DefaultZone Default zone 0 0 kbps On On  
    DNSZone DNS 0 0 kbps On On The search rules permit: 1
    Covered area (server) Crossing Server 0 0 kbps Assets (Connections noactive) The search rules permit: 1
    Covered area (UC) Unified Communications crossing 0 0 kbps Off Assets No rule search configured

    Details

    Name: Area covered (server)
    Type: Server covered
    Hop count: 15
    User name: qwerty
    H.232 Mode: on
    Port: 7003
    Transport: TLS
    TLS check mode: Off
    Accept records submitted by proxy: enable
    Media encryption mode: Auto
    Support of ice: Off
    The poison SIP mode: Off
    Authentication policy: do not check the credentials
    UDP retry interval: 2
    Number of UDP attempts: 5
    UDP keep alive interval: 20
    TCP retry interval: 2
    Number of attempts TCP: 5
    TCP keep alive interval: 20

    Name: Covered area (UC)
    Type: Course Unified Communications
    Hop count: 15
    User name: qwerty
    SIP port: 7001
    TLS check the name of the object: expc.mydomain.fr
    Accept records submitted by proxy: enable
    Support of ice: Off
    The poison SIP mode: Off
    Authentication policy: do not check the credentials
    UDP retry interval: 2
    Number of UDP attempts: 5
    UDP keep alive interval: 20
    TCP retry interval: 2
    Number of attempts TCP: 5
    TCP keep alive interval: 20

    (b) research rules

    Priority Name of the rule Protocol Source Authentication required Mode Type of rehearsal Pattern string Behavior model On match Goal
    50 LocalZoneMatch Any Any NO. Any alias       Continue LocalZone.GetDaylightChanges
    100 Search of covered area rule Any Any NO. Any alias       Continue Covered area (server)
    150 Search for DNS zone rule Any All areas NO. Alias matching Regex (?. *@%localdomains%.*$).*) Leave Continue DNSZone

    (c) changes of

    Change the destination to the URI format alias
    Prefix
    ([^@]*)
    Replace
    ------[email protected] / * /

    Hey Denis,

    It seems that you might have some problems.

    • VCS - C you have a search rule that targets CUCM, but it does not perhaps not for you for 2 reasons.
    1. It's the same priority as your rule of research area of course which may cause routing loops. Change the rule for targeting priority CUCM 100 to something between 50 and 100.
    2. It will only forward calls to CUCM which begin with a 3 and are followed by 3 numbers ending by mydomain.fr(.*). If you are URI calls that do not match this pattern, they will not be sent to CUCM. Make sure to set your match of regex to include your models DN so that your schemas URI incase they are figure not URI.

    Make these changes, and you may have more luck. Make sure also that your CUCM is configured to allow the composition of the URI. Ensure that the device that you are calling has a URI configured on the line.

    Once you make these changes to retest a call. If that fails, send the history research of the failure of the attempt. You can find it on the VCS under status > Search History.

    -Chad

  • schedule meetings with the TMS and CTManager on the same endpoint

    Hello everyone

    I explain my problem, we have a CUCM with CTManager to plan meetings of the CTS, we have 2 VCS with a TMS to plan meetings of TC endpoints also.
    Our TC end points are saved in venture capital using H323, recorded in CUCM using SIP and exchange of email to can program using the CTManager. And TC endpoints are supplied by our TMS.

    As endpoints of TC may appeal to the endpoints CTS sometimes we have meetings planned between TC and CTS endpoints in the CTManager, but if schedule us a meeting by using the TMS, meetings of CTManager disappear and endpoint show TMS meetings, if we do a resynchronization of the electronic mail room in the CTManager We can see again in the meetings of CTManager in the touchscreen.

    We tried not to allow bookings for this endpoint of TC in the TMS, but later there is no way to schedule a meeting for this endpoint, even using the external call.

    You know any workaround solution to activate the two calendar options running on the same endpoint without removing the CTManager meetings? We don't need the BBFRR for the TMS meetings, only for meetings of the MLC.

    Best regards

    Hello

    Disabling power of the TMS write calendars 'Meetings' on managed systems is not supported. If an endpoint is added to the TMS, TMS assumed that endpoint is not used in another system of planning (such as CTS - man) and could replace any parameter that depends on the other system of planning.

    Kind regards
    Kjetil

  • Numbering outside telepresense SIP URI

    Dear all,

    I'm new in cisco and telepresense Highway and I have a challenge to set up the system so that anyone from outside of the network should be able to manage our devices at the end of TV that are stored in CUCM presence. These are devices EX, SX and DX and the requirement is to compose these extension from any where on the outside with dialing SIP URI.

    We already have expressway-C and E, configured for the client and customers Jabber wants to use the highway to be able to do or to make calls from outside any other end point.

    This is achievable if so what would be the steps to get it.

    Hi Laurent,.

    To answer your questions:

    1 can I make a call to my Jabber client for devices SX using SIP URI.

    -  Yes. Method of numbering SIP URI is recommended, especially when the endpoints are connecting via the Internet.

    2. How can a person outside our network call on my devices EX and SX. Basically what he must dial to reach the device SX bearing the number 1234. for example [email protected] / * /.

    -  An endpoint outside the network can reach your end point within your network through the highway. Any device on Cisco Unified CM can be reached during
    the Internet by alphanumeric numbering assigned SIP URI or the required directory number (DN) using the <+E.164 number>@domaine. He is the solution provided by the side of the highway and track Express Core to extend your audio network seamlessly to mobile users, wherever they are.

    3-Yes, I need to configure anything specific for this thing.

    -You need set up a crossing secure area between your Core Expressway and the edge of the highway. Configuration is simple. Just follow the deployment guide in the link that I sent you. Refer to page 15 and the following procedures.

    Kind regards

    ACE

  • Purge schedule on the TMS/TMSXE

    TMS is 14.3.0

    TMSXE is 3.1.2

    We gave up on the recording of our telepresence on the CUCM, we work to keep away them from the CUCM and their inclusion in the VCS - C (see here). But when you remove the CUCM non-registrant endpoints off the TMS and add it as registered endpoint C - VCS, TMS causing problems on all scheduled meetings.

    After the now the rebinding VCS - C saved telepresence endpoints for room calendar changes in the TMSXE, it

    1. Add the 'new' (actually modified) end for the calendar of meetings
    2. maintains endpoint (previously saved CUCM) former listed as a "shadow" unknown endpoint
    3. clear the multipoint resource MCU/TP server allocated meeting
    4. send an email to the host of the meeting, saying: "information your administrator is migrating to a new system of conferencing reservations." During the migration, your conference was made. Cautions due to limited resources of routing, automatic routing could not be set up for your conference. A participant dial-in/out external added to the call is not connected. To ensure that the Conference will connect and the delivery of resources are available, contact your administrator to videoconferencing. Road is not valid.

    But all meetings are internal, and there are many resources available on the telepresence Server

    I wonder if there is a way to solve this problem and what we should do. Is there a way to purge all the TMS meetings so that the TMSXE re - synchronize all the information meeting of the TMSXE.

    Hello

    There is unfortunately no history of migration in TMS between a CUCM-centric and a deployment centered on VCS. If you make a change like that, you essentially need to manually update all future bookings.

    Kind regards

    Kjetil

Maybe you are looking for