Unable to connect to the internet, WLAN will only connect to "local access" and does not recognize my home group / network

Similar Questions

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive. Can you help me?

  Vista gives the message "there is no more available end point" and does not allow me to share a folder on an external drive.  Can you help me?

  Hello

  Thanks for posting in the Microsoft Community.

  I don't know it must be frustrating!

  Let us try these steps and see if that fixes the problem:

  (a) press Windows + R keys to open search Run

  (b) type regedit , and then click ok

  go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\BFE

  c) on the right, click it, click permissions

  (d) click on ADD and type everyone and click ok

  (e) now click on all

  (f) below, you have permissions for users, select full control and click ok

  g keys) press Windows + R to open Run Search

  (h) type services.msc , and then click ok

  (i) double-click base filtering engine service.

  (j) Make sure that the service status is started and the startup type is automatic

  (k) the procedure for the windows firewall service

  (l) click on apply and Ok.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information:

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Hope the helps of information. We know if you need help. We will be happy to help you.

• Try to reactivate my old Photoshop Elements 10 by downloading to the new computer, but Adobe insists on downloading of 14 elements and does not recognize my serial number

  Try to reactivate my old Photoshop Elements 10 by downloading to the new computer, but Adobe insists on downloading of 14 elements and does not recognize my serial number

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Can not connect. He does not recognize her fingerprints and does not recognize the password

  Original title: cannot open a session

  my friend cannot connect to his pc. For some reason it does not recognize fingerprints and then when he tries to connect manually using his password, it says it does not recognize the password, even though he knows that it is correct. Does anyone know why this is and how to solve?

  Hi Knightofkent,

  You can read the article and check if it helps.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  I hope this helps.

• My computer won't let me not reinstall windows because he thinks that it is 32-bit and does not recognize the installation discs. Help please?

  My computer has not worked since I stopped him during an automatic update. Which I have been kicking myself since then, but the last time that he updated, he beat the computer and I panicked.

  Anyway, it won't run certain programs, including iTunes and a large part of MS Office, and no matter how many times I try to reinstall, they still do not work, saying: "side by side configuration is incorrect."

  What I want is to restore it to factory settings - all my data is secured and sustained upward. But when I put in my recovery disks (and they are the highest boot priority in the BIOS) the system takes care of the hard drive as usual. When I remove the ability to boot from the hard drive, my system no reserves at all, telling me to restart or insert a suitable disc. And when I boot from the disk and try to run it manually, by clicking ETFSBOOT, it tells me that "the version of this file is not this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program. »

  I have double and triple checked this - my system is 64-bit. My records are 64-bit. As far as I know, the computer got garbled during the automatic update and now part of it think it's 32-bit (some programs are divided into sections 32-bit and 64-bit). All I want to do is to reinstall windows, but I don't know what to do because it does not recognize my discs! Any suggestions, internet?

  Thank you very much.

  In addition, if it is relevant, I'm Windows Vista on an ASUS K50IJ laptop. I do not have the windows install disc because the computer was shipped with windows installed, but I have the recovery disc ASUS (which have been used to restore my computer in the past).

  Hello

  Since you are unable to open programs like iTunes or Office, you can try to perform the system restore and check if it helps.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  About the factory restore the question, you need to contact ASUS support for additional help on ASUS recovery disks.

  ASUS support

• Is there a website on the internet which will cover my computers from viruses and tell me if they are ok or not?

  I have a problem. There was an article in the newspaper a few computer virus a few months ago. He says that it slows down your computer and it does all this other stuff. He had a website in this article that checks if you have this Virus. He also says that there are instructions for, if you have one. Well, my father recycled this article until I can get the website. Find throughout this site, I'm not. Ive got a HP Compaq D530 with Windows XP Home Edition which is not too fast that it uses when I built it three years ago. I also have a HP Pavilion G6 with Windows 7 Home I had in March for my birthday. I also have an IBM Aptiva with Windows 98 first edition I had in 1999. I don't use it that much, but it is replaced when I get parts to build a new one. You have a Web site I can check if my computers are okay?  The Windows version is Xp because I typed this on my Xp computer. It is more of a 98, Xp, question 7.

  original title: computer Virus

  Hello

  There is no website that we can direct you to this analysis, and there is no access to distance away.

  Search for malicious software yourself, in Mode safe mode with Networking if the Malware stopping you scan in Normal Mode.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#winxo

  Windows XP

  Using the F8 method:

  1. Restart your computer.
  2. When the machine starts first, yet once it will list usually some equipment that is installed on your machine, amount of memory, hard drives installed etc. At this point you should tap the F8 key repeatedly until you are presented with a menu of Advanced Options in Windows XP.
  3. Select the Safe Mode with networking option using the arrow keys.
  4. Then press enter on your keyboard to start safe mode.
  5. Make all the necessary tasks and when finished restart to start in normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  Malwarebytes will not work on 98 and can cause other problems.

  See you soon.

• Unable to connect to localhost - web sharing does not?

  I recently upgraded from the Mavericks to El Capitan. Before the upgrade, I could go to localhost/folder/file to test php files that I had in Library/WebServer/Documents/but since the upgrade I just get "Unable to connect" message in my browser.

  The first thing I checked was in system preferences > sharing Web. It was not so I have tried to market. When I do the cursor moves on IT and the words say "web sharing is on", but the dots are red. If I close the web sharing control panel and reopen it is OFF.

  The second thing that I tried was running on apache in the Terminal, but he says that it is already running.

  Then I tried this trick and got the following error:

  apachectl configtest

  AH00526: Error on line 20 of /private/etc/apache2/extra/httpd-mpm.conf syntax:

  Command not valid 'LockFile', perhaps misspelled or defined by a module not included in the server configuration

  Have tried Googling this syntax error and tried a few solutions, but just make more and more confused now. Maybe someone out there better than I understand what is happening? Thank you very much in advance.

  What is in your file httpd - mpm.conf around line 20.

  I have no reference to "LockFile" anywhere in the config file, so looks like there's something wrong with the file.

• When I download anything on the internet, it disappears. If I select run it does not start.

  I have windows vista Home premium SP2.  When I try to download anything I get the usual dialog box to give me options toRUN or to RECORD I tried to download using both perform and record.  If I select RUNfile will download completely, I watch it go all the way to 100%, then the dialog box disappears and nothing happens.  If I selectSAVE, same thing I can look at the file download 100% and then it does not appear in the destination folder.

  I tried selecting the destination as a desktop or different folders.  I disabled user account control and I also tried to create a new account.  I have also made sure that I use the admin account.  I use IE8, and have also tried to reset the default browser.

  The last thing I would do would be to restore to a point, when this was not the case, but I have no restore points available.  I just noticed that I had a problem when I discovered that Microsoft Security Essentials icon disappeared and I tried to download it again, I went on my laptop using another computer and a USB key.  After scanning, there is no virus so im lost of ideas now.

  Someone out there has a solution to this problem.

  Suggestions:

  1. determine if your user account is corrupted or not.
  Create another user account (assuming that it would be another admin account). Log on to this new account, do a download/install. Use option record and see if it get saved in the destination folder.
  If the answer is Yes, then your old admin account is corrupted.

  2 make a check of the file system. See if it finds corrupted files and see if it can fix them.
  In the end, it will tell you either...
  "no breach of integrity", or
  It finds files corrupted but unable to fix them.
  Try to install again and see if the problem is now gone.

  File system check... sfc/scannow

  Start button > Search box type cmd > look up, do a RIGHT click oncmd.exe > click onRun As Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Create odbc connection between local access and remote access or sql remote

  I need to connect to a remote access or sql database using my local in access 2007 version.  I can't understand what I put in each of the available boxes.  I see only a SQL driver to the system section of the odbc Wizard.  If I decide that he wants to know where the sql server is... well, it's not local, I have a web address for this and may not know how to get the systΦme can recognize the information remotely.  Help, please!

  Means of access:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://social.answers.Microsoft.com/forums/en-us/addbuz

  Access support at the link above.

  They will help you with your questions of access when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Where to change the settigs in xp pro.w/sp3. My pc does not recognize the dvd - rw that I put in. Have tried to reinstall, update and system restore. HELP PLEASE

  HELP, I tried a lot of things.

  OK lets see windows xp pro. with sp3, all updates are installed.

  This is an old pc he had a CD in it, and I replaced it with another pc, in working condition.

  I think it's maybe in the settings, I don't know the right one for a change.

  Parameter is not what you are referring to. The rider is wrong, the dvd device does not work or it is possible that the drive is disabled in the system BIOS, although I seriously doubt that.

  Please tell me how your drives are connected for example... IDE or SATA? If the IDE is the disk device and hard dvd connected on the same cable IDE? Tell me what is the position of the rider is on the hard drive and the dvd device. CS, master or slave.

• After recovery, the cr2 files have '... cr2.jpg ' extension and does not open in PS sc5 / bridge.

  After surviving several hundred GB of jpg and cr2 to a disc formatted, I can open jpg PS as usual. Recovering cr2/CR2 files have an extension that ends with cr2.jpg.

  Niether bridge or Ps can open them. I guess that's because cr2 have integrated in them when they are created and the recovery software their pulled up as a jpg file. Is there a way to isolate the raw and jpg files in this situation, or maybe there's a download that can take care of him?

  PS can not run window indicates; Incorrect flag or extension jpg too long.

  Version of cs5 pc Win7 670339

  Thank you!

  Well, after having successfully survived about 120 000 images of a formatted drive accidentally I'll pass on a little of what I learned. I'll try to keep it brief and perhaps will post a more complete NET when I have the chance.

  First thing I did was arrested and disconnect a drive so that I was not tempted to tinker with it. Also, I thought I'd need to rush to a data recovery service quickly.

  Secondly, after consulting a friend network business, he suggested that he had actually downloaded a program of recovery on the net and it was reliable for its purposes. I had a cool 2 TB drive ready to receive the recovered files. I went online and downloaded EaseUs recovery. I ran it to feel fairly confident he was not destructive. I was relieved to see that it has found a huge Bank of image files. I got them it is clear that some of the images have been jpg and some had a cr2.jpg extension. When the recovery process was I did then went to see the images. I could see very good jpg images, but images with the cr2.jpg extension were not visible. That's when I found here on the Adobe forums. I tried various methods to rename the files, (ie: delete the part cr2 or jpg, etc.) so that the extension should have (in my mind), makes sense for the Ps or even windows Explorer also. No luck.

  I tried another download of recovery. These are all a little suspicious, btw, when you look at their Web site there are usually some spelling or grammatical errors, which, for me, is a little disturbing. Wondershare was the next program that seems to work very well and had to jpg and cr2 in separate folders treated. Horay! I ran the program. It took 16 hours to run, (fortunately I started it just before dinner so this should be done the next day when evryone went to school etc.). He got up to 99% complete and crashed! After reduction of the research to a whole limited file and try again, same thing. I sent an email to their support. It took a few days but they responded to what seems to indicate I have try their "most powerful" version free of charge.

  Meanwhile, I had downloaded a program of third 'FireCuva '. It sounded pretty hoaky, but I thought that was just a poor marketing plan and to date, these programs have been getting me close enough.

  I ran FireCuva. He finds and separated my cr2, jpg, mp3, mp4, Quicktime, etc beautifully! Unfortunately, my records have disappeared. However this was not unexpected, and a small price to be so sloppy in the first place.

  Now, I had about 120 000 images in folders in number. "Date created", were there, but without a job, the recovery program.

  The next task was to try to organize the images.

  After a bit of debate, I open Lightroom for the first time in years. (I had abandoned awile ago, because I couldn't get a handle on "catalogs" and other 'virtual' Lightroom aspects, (I wanted the knowledge hard and fast, hence all my stuff was).)

  I imported each folder of the pile recovered and exported to files by date on the same drive. I now have a great appreciation for the ability to create collections and catalogs in Lightroom with out having to copy and move images.

  An inspection further, I found that all my ps adjustment layers in my Tiffs, etc. are still there!

  In short;

  FireCuva recovery software does the job. It cost $59 (even though it says $49 on the download button).

  Lightroom handles the rest. I only wish I could, "Lightroom", the rest of my life!

  Thanks to those who read and published in the effort to help!

• New version, want to come back to the previous download box, a new has no history and does not show the speed of download, how to get back?

  They are in the question. I was very happy with the old download box, I have a mac, so when I got the new update of firefox, I was very surprised to see I cannot look through old downloads and can not see the speed in which the file is downloaded, it is not sensible cut options off...

  Note that Firefox 20 can also open the topic: downloads page in a tab (see also about: on).

  You can set the Boolean pref browser.download.useToolkitUI true on the topic: config page to restore the old Download Manager window.

  • http://KB.mozillazine.org/about:config

• Unable to connect on my macbook pro - does not accept my password

  Failed to open a session on my macbook pro (model 2015). n ' accept my password - screen appears to be frozen

  Does this mean that you can not enter the password, or you're not, and it is rejected?

  What safeguards do you have?