Jabber the dial in the conference on MSDS

Similar Questions

• Conferences at the request of MSDS do not connect with TC7.0.1

  I have a problem with the conferences of TMS (version 14.1.1) with endpoints running TC7.0.1 software.

  The Conference is correctly created in TMS and messages on the features of the planned conference because of (beginning and end), but the Conference is unable to connect.

  A sample of the journal of the Conference of the TMS is the following:

  01/08/2014-10:31:42	User		Conference created
  01/08/2014-10:31:42	network service		Conference started
  01/08/2014-10:31:42	network service	POLYCOM	Meeting allocated on the port: 1
  01/08/2014-10:31:42	network service	POLYCOM	The message sent to participant POLYCOM: at the request of appeal being connected
  01/08/2014-10:31:43	network service	EX90	Allocation failed: hostAddress: 10.108.134.33, description: GetDocument failed. URL: https://10.108.134.33/putxml, base exception: the underlying connection was closed: an unexpected error occurred on a send.
  01/08/2014-10:31:43	network service	EX90	The message sent to participant EX90: to the appeal being connected
  01/08/2014-10:31:44	network service	EX90	Allocation failed: hostAddress: 10.108.134.33, description: GetDocument failed. URL: https://10.108.134.33/putxml, base exception: the underlying connection was closed: an unexpected error occurred on a send.
  01/08/2014-10:31:44	network service	EX90	Allocation failed: hostAddress: 10.108.134.33, description: GetDocument failed. URL: http://10.108.134.33/putxml, base exception: the remote server returned an error: (500) internal server error.
  01/08/2014-10:31:45	network service	EX90	Allocation failed: hostAddress: 10.108.134.33, description: GetDocument failed. URL: https://10.108.134.33/putxml, base exception: the underlying connection was closed: an unexpected error occurred on a send.
  01/08/2014-10:31:45	network service	EX90	Assign has failed, the Conference is not automatically connected
  01/08/2014-10:32:19	User		End time of conference after the 08/01/2014 11:25:24 to 08/01 / 2014 10:33
  01/08/2014-10:32:19	network service	EX90	The message sent to participant EX90: new end time: 10:33
  01/08/2014-10:32:19	network service	POLYCOM	The message sent to participant POLYCOM: new end time: 10:33
  01/08/2014-10:32:51	network service	EX90	Published meeting port 1

  Note 10.108.134.33 is the IP address of the EX90.

  If I go down to the point of termination to TC6.3.0 (or earlier), the Conference connects correctly and the EX90 error messages are not in the newspaper.

  Edit: If I get the TMS to schedule the call in reverse (this is to say, Polycom, or no software TC point of termination, the EX90) the call also allows to connect properly.  It's only a problem if the TC7.0.1 device is configured to start the call.

  Wayne

  --

  Remember the frequency responses and mark your question as answered as appropriate.

  Hey Kjetil,

  That's right, I also opened a default endpoint such as he was in TC6 allowing orders of XML API not supported and the goal is to get this documented for everyone CSCum50651. The default of TC is CSCum50686.

  Thank you

  Chad

• can plan us the Conference from Outlook with Cisco TMS

  Hi team,

  is it possible to provide to the Conference by the prospect with Cisco TMS, we have no license to Exchange provisoning. Y at - it a plugin that can be used with Microsoft outlook.

  Please advise.

  See above for my response, either you need to purchase the license and install / configure Setup

  or you program something yourself.

  I would not exclude that there could be tools external hookin upward on the MSDS as well, but I'm not aware of anything.

  The other way is to do it by politics, rent rooms and is a participant dials up to the

  others or if the meeting is greater everyone connects the mcu...

• Why the MCU is automatically added to the conferences in TMS?

  Info:

  Endpoints: Tandberg 6000 MXP & 95 MXP

  TMS: 13.2.2

  Codian MCU 4510: Software version 4.4

  Tandberg GK: N6.3

  Tandberg BC: Q6.3

  When I create a conference at TMS and want an end point to compose our system to an MCU on another site (confined), the our local MCU is automatically added to the Conference, for some reason any.  For example, if I create a conference with room 123 and number 'Dial Out' external 2222222, TMS adds MCU of our system and forces to compose both room 123 and 2222222, which is totally useless.  This should be simply, what is the endpoint is, a direct line to 2222222.  Why the MCU is being added?  This will use licenses MCU in haste when it is not necessary at all.

  I went through TMS > administration tools > Configuration > General settings, network settings and conference settings and cannot understand why the MCU is added.  If we dial manually, no problem.  My goal is to automate the entire composition, however.

  Pointers?  I put some of the parameters of the TMS > Admin Tools > Configuration > Conference settings below.

  

  Luke

  Hello

  Reduce the bandwidth of conference help? TMS could add a MCU if it detects that one or more participants do not support the bandwidth conference.

  Kind regards

  Kjetil

• Cisco TMS - Making Participant Important in circles of the Conference

  We have a Cisco 5300 MCU.  In the settings, there is a function to make a large participant.  Which takes into account that the stronger participant even when we speak do not.

  We have admins that installing and create conferences in MSDS.  Is there a way to configure this option in the TMS at the Conference is, or at the Conference and not required to proceed separately on the MCU?

  Hello

  Yes, the appeal has to be active. So you can access the Conference through the CCC, right click on the participant and select 'set as Important. "

  Concerning

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• NEITHER sessions only weekly: what is the 'conference' without sessions?

  Here's what it says on the site OR of the week:

  Sessions going only: Includes access to keynotes, sessions and expo booths only.

  Full of conference: Includes three-day Conference and exhibition admission, meals,
  exhibition of receptions and parties.

  Unless the 'Conférence' and 'sessions' are used interchangeably, it seems that the part of the 'Conference' described in the full Conference is more than just meetings. What is the Conference include other than sessions? I have seen that there will be hands-on workshops, but I don't know if these count sessions or not.

  Sorry if this sounds like an incredibly nit-picky issue. I just clarification on that.

  The extra stuff the full Conference are lunch and dinner/activities/parties.  No technical information is presented in these - just everyone eats, drinks and fun.

  Hands-on workshops sessions are considered.

  Bruce

• Presentation of the action does not work during the Conference

  Hello world

  Here's the background
  -CUCM 10.5
  -Telepresence conductor XC4.1
  -Telepresence Server (VM) 4.2
  -Endpoint: MX300

  I have problem when sharing a presentation at the Conference meeting.
  It doesn't seem to work.
  However, the part of presentation works with success during a normal 2-way call

  I read an article by cisco,
  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  A field is related to the function of presentation,

  Allow the content
  (Available when the preference of Service has a type of telepresence MCU Conferencing Bridge)
  Whether or not, participants will be able to send video content, such as a presentation.

  Yes: one lane will be reserved on each cascade TelePresence MCU and TelePresence MCU primary specifically for content. Use this setting to enabled WebEx conferences.

  No: the participants will not be able to send content, regardless of the number of ports available on the MCU. Content can always be displayed, since some end points provide content in their main video channel.

  The default value is Yes.

  Need MCU allow sharing feature? or I missed something?

  Thanks in advance

  Sam

  Allow that content is available only when the conference bridge is an MCU and does not apply to a server of telepresence.  The only thing you need to do within the Orchestra, is ensure that "content quality" within the model of the Conference is not set to 'Off', see the top of pg 61 of the guide that you have linked to your post.  Also, make sure you have enabled on the SIP Trunk to driver in CUCM BFCP.

• How can I manage conference layout to the driver at the Conference?

  How can I manage conference layout to the driver at the Conference?

  I am able to change the layout to the MCU only, but through condcutor is not possible.

  I have driver manages 5 vTS.

  At the moment it is not possible to change the layout of the Conference on the driver or the vTPS managed remotely, this is possible since the Touchpad of the endpoint.

• Codec c60 sending two cameras at the Conference

  Hi people, I need your help.

  Our client, we have a codec c60 of cisco and we are facing a problem inside.

  We have two cameras in codec c60. We made a presentation in console software TC to send both cameras at the Conference.

  We have the following entries in the codec:

  source 1 - first camera

  source 2 - secondary camera

  source 3 - pc

  We started the conference without presentation. Everything works fine. Both cameras are sent into the main channel. But when we try to send the presentation. The presentation works fine, but just the first camera is sent to the main channel. The layout does not work! But, if during the Conference, we go to the configuration and set the 'default presentatin source' as' 2". Source 2 is sent as presentation properly and in the mainstem both cameras are set correctly in the Console of TC. It works! The same thing happens if we set source as' the presentation by default"1. But if we define as the source 3 (pc), then presentation works normally, but just the first camera is sent to the main channel again, even if I don't put anything on the main track in Console of TC. The first camera is the "main source by default".

  We tried to change the cables, the pluging the PC in "Source 2" and cable to the secondary camera in "Source 3". But we had the same result. If the 'PC' is the source of presentation, only the first camera is sent to end.

  Can anyone here help me? Please help me.

  If necessary, I can provide the XML file that I use in the TC Console.

  Thank you

  Hello

  Please try again using a pc 16:9 source, because your layout of the TC console is set up for the resolution of pc.

  Let me know if you get what I get when using a PC 16:9 source.

  Sent by Cisco Support technique iPhone App

• Tandberg MCU 5300 series supports the Conference me the feature?

  Hi all

  I would like to know that the 5300 Tandberg MCU series supports the Conference me the feature?

  We checked the 5320 MCU data sheet,

  Cisco TelePresence MCU 5320 CTI-5320-MCU-K9

  Comes with: 5320 - MCU and cables - MCU ports must be enabled with optional port licenses

  Software for Cisco TelePresence MCU 5320 license options

  1 nHD full HD/2 HD/4 SD/8 ports on 5320 MCU (max 10 with this option (6 used for nHD)) LIC-5300-4PL

  Second option Ethernet port (VFO) for the MCU 5320 LIC-5300-VFO

  AES and HTTPS option for the MCU 5320 LIC-AESMCU53-K9

  However, there is no information related to Conference me function.

  So, can we know everything that Tandberg MCU 5300 series supports the Conference me the feature?

  Best regards

  Ben

  Hi Ben,

  Conference is not compatible with the MCU 5300 series.

  Best regards

  Markus

  Sent by Cisco Support technique iPad App

• Failed to create the Conference ' 8801 - Test connection '-duplicate digital id

  Running 13.1 TMS and Codian 8510 SD blade running 4.20 (1.43)

  When I'm planning through TMS using this card, I get the following error:

  Failed to create the Conference ' 8801 - Test connection '-duplicate digital id

  However when I'm planning TMS using another slide with the same version of the software it works

  Can someone tell me why this is happening?

  Anthony

  We had the same problem with > = 20 conferences on the blade, and I can tell you that we had the same thing

  question and the question went after the 4.2 update (1.50) and TMS13.1.2 (if the MCU upgrade)

  alone must fix).

  And, you got the point in your last message, > = 20 conf == problem,.<20 =="no">

  What I have is that the API MCU always reported only the first 20 conferences.

  TMS has created the new conference (and I also saw a new reserved (e) of the Conference on the MCU)

  but TMS checked once again if that's really where went wrong because he was not listed in the breast of the

  first of all 20 and if it failed.

  Codian updates may take some time until the blade is up again after the reboot, so be patient :-)

  Good luck!

• Microsoft Lync 2010: When you add users to the Conference for the first time without having to type anything, the chat window is grayed out.

  Hello

  Microsoft Lync 2010: When you add / invite users to the Conference for the first time without having to type in the chat window, the chat window is grayed out. I am not able to type anything in the chat window to continue the Conference.

  Thank you
  Rajeev G C

  Phone: 9886540640

  Hello Rajiv Iyer,

  There is a forum for questions about Microsoft Lync 2010.
  Click here for a link to repost your questions in forums Microsoft Lync.

  Thank you

  Marilyn

• C40 DualDisplay fails in the Conference.

  Hello

  C40 TC6.0.0.876266 running with the DualDisplay option.

  When during a conference through MCU, the content is still displayed in the PIP on the first screen,

  instead of the content on the second output.

  Whenever not in the conference via MCU, the content will the second screen.

  Is there something missing in the C40 or MCU to configure this option, or is this a limit?

  Best regards

  JC

  SIP does not support content encrypted prior to version 4.5. If you run 4.4 or earlier and make SIP calls encrypted, there is a limitation where content can be displayed in the main video channel and not in its own channel.  See the limitations section in the MCU 4.4 Release Notes for more details. Encryption of the ether must be turned off the coast of the upgrade to version 4.5, as it contains a fix for SIP encrypted calls using content, see pg 3 of the covering 4.5 MCU memo.

• Failed to create the Conference on virtual server of telepresence

  Hi all

  I installed Virtual Server of telepresence and injected the LIC-AES-VTS-PMP-K9, LIC-VTS-PMP-INTOP, LIC-VTS-PMP-K9-LIC-VTS-PMPUWL-1SL. I wonder why I can't create the conference room. When I access the Conference menu, there is no button to create the Conference.

  Thank you.

  With virtual Server of telepresence that you will not be able to manage or create conferences directly on the server TP, you must use the conductor to create and set up conferences.  The virtual server TP is identical to the pluralistic media 310/320, to see how the virtual model differs from other models TP server, they are listed in the Cisco_TelePresence_Server_on_Virtual_Machine_Release_Notes_3-1 xbottom of pg 2.

  To learn more about the managed mode remote TelePresence Sever in use with the conductor, you can learn more on this subject in the Cisco_Telepresence_Server_Release_Notes_3-0_2-48, pg 2.

• Doubt about to make the Conference at 03 points

  Hi guys,.

  My client tries to make a video with 3 points, all via the internal network

  Only the first two connection can display video and audio, the audio comes third only.

  This behavior is normal? Y at - it any documentation that explain that this questions?

  Thank you

  Wilson

  Hello

  This is normal when the video end point hosting the multisite call do not have MS (multisite) installed. You can make point to point call with audio and video. Adding another call site / the Conference will make the site added as a participant only audio.

  You must install a MS option key to activate Multisite functionality to host a video conference with up to 4 sites which your site (3 + 1) with two channel audio and video.

  Kind regards

  Acevirgil