ALPS driver IOCTL error found: 320

Similar Questions

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• Drive 0 not found error

  Original title: 4400 message stopped Dell system restart

  Help I can't get anything. I arrived at the diagnostic part and I had... .searching please wait

  Primary IDE

  Disk 0:

  What is c? I have no hard drive?

  Hi CDarga,
   
  Primary drive 0: not found error could be due to one of these reasons:
   
  (1) cables are not properly connected to the drive hard (or motherboard).
  (2) the hard drive is damaged and must be replaced.
  (3) basic Input Output System (BIOS) settings can be bad.

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Check these settings on your computer to solve the problem.

• my computer says that my primary drive 1 not found, secondary drive 0 is not found. also allicating I/O bar for PCI device error.

  We had a power outage about 2 weeks ago, it burned my hard drive. My neighbor put a new disc in for me, now my computor is said primary drive 1 not found, O secondary drive not found, and 1 secondary drive not found. I do not know how to solve this problem, can you help me?

  Hi camicannon,

  Check out the wire link such question and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/XP-primary-hard-drive-disk-not-found/c98f8205-78d8-4e6a-A603-8c4fae852690

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  at startup, I mesg.drive get 1 not found serial ATA, SATA2 and drive 3 not found parralell ATA, PAT-1 (PRI IDE SLAVE)

  Hi waynehile,

  1. are you able to boot into Windows after the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  Usually, this would happen if the hard drive is not set correctly in the basic input/output system (BIOS) or the settings in the basic input/output system (BIOS) are incorrect.

  Basic input/output system (BIOS) is a program built into personal computers that starts the operating system when you turn on your computer. It is also referred to as system firmware. Basic input/output system (BIOS) is part of the hardware of your computer and is separate from Windows.

  For more information about the correct settings in the BIOS of your computer and how to check and change these settings, see your computer documentation or contact the manufacturer of your computer.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Drive hard error Code 2000 - 0142

  Inspiron 15 (3531, mid-2014)

  I tried boot diagnostic that the result has failed with the error code 2000-142.

  I have used a quick diagnostic race through dell online support site - it shows critical errors found

  for hardware failure then suggested for a replacement.

  Targeted both reading test SMART short self-test is broken.

  We hope to hear from you on your recommendations of experts on hardware issues.

  [Admin NOTE: maintain the label removed in accordance with the TOU strategy]  [Admin NOTE: deleted in accordance with the Express service code TOU strategy]

  Ryan Ibarreta - [Admin Note: personal information]

  Philippines

  Error code 2000-0142 usually indicates a failing hard drive / failed, first of all, try to remove and reinstall the hard drive, then re-run the diagnostic tests and see if you receive the same error.

  If the same error is received, the hard drive has failed, then you need to replace it.

  If you have a warranty from Dell, contact Dell Technical Support for a replacement hard drive.

  Bev.

• Get a Bluetooth device message"driver is not found when you connect Bluetooth

  original title: Bluetooth connectivity problems

  Hello

  I own both a T-900 of Fujitsu (64-bit Windows 7) and a HTC Rezound and have been using bluetooth to transfer files between them until a few days ago. Out of nowhere, bluetooth does not work anymore and now shows that "Bluetooth device" driver is not found. I tried to uninstall and reinstall it from many different sites, try different, but for some reason bluetooth packages some do not fix the problem of Bluetooth device. My computer can not find other bluetooth devices, and my phone does not recognize my computer as a bluetooth, even with the two device are detectable. If someone had a similar problem or knows how to fix Bluetooth device? Any help is greatly appreciated!

  Hi autumnv92,

  Were there any changes made to the computer before the question?
   
  Check out the following and check:
  Method 1:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2:
  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
  http://support.Microsoft.com/kb/2654568

   
  Method 3:
  See the following steps:
  1. turn on your bluetooth device
  2. right-click the icon for the device in the system status bar
  3. choose / click on "show bluetooth devices.
  4. There will be a list of devices you never associate (like your phone, another laptop, etc.).
  5. simply remove from the list.
  And the warning like "(pilote de périphérique Bluetooth périphérique est introuvable) will not show up again."
   
  Method 4:
  Bluetooth devices do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/980396

  
   
  Also check these links for more information:
    
  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

   
  Hope this information helps.

• Error found: iP1600 printer can be connected to the network

  Title: Problem of networking; model of the host is running XP and can not print from computer laptop/WIN 7

  Hi, my host comp. is running WIN XP and laptop WIN 7. I've already updated the printer driver Canon witch is connected to the host model. On the hardware of the laptop I can see the printer is on a network, but... cannot print the test page / troubleshooting of the error found: iP1600 printer can be connected to the network.

  I also downloaded on laptop CanonPrinter add-on driver, this driver necessary?

  Hello

  I suggest you install the drivers for PIXMA iP1600 on both Windows XP computer and check if the problem persists.
  PIXMA iP1600
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip1600#DriversAndSoftware
  Hope this information helps.

• device driver Bluetooth not found in windows 7hb update?

  I have not found a bluetooth device driver so please help...

  /

  Hello

  1. What is the number of brand and model of the computer?

  2. What is the message code error that you experience when you try to use the Bluetooth software?

  3. what was the recent change in hardware or software performed on the computer before the question?

  Please follow the steps mentioned below to help solve the problem.

  Note: Follow the troubleshooting steps in order of effective troubleshooting and compatibility checks.

  Method 1

  Error: "device driver Bluetooth not found" when you try to connect to a Bluetooth device

  http://support.Microsoft.com/kb/2654568

  Method 2

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-my/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Refer,

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/is-is/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  I hope this helps.

• CS3 Master Collection: "critical errors found in the configuration" loading installation

  Hello world

  I have the installation media of license volume for Creative Suite 3 Master Collection, and I try to install more on an image I want to deploy the year next to some laboratories.  The image is an image of Windows XP SP3 new, material is tested and I use these CS3 discs for some years now, with absolutely no problems during installation.

  I just tried to install the suite to the reference computer / picture that I'm building the image now, when I insert disc 1 and run the installer, the installer initialized and files copy and then when the main installation window appears, I get the error:

  ---------------

  Message from Web page

  Critical errors found in the installer

  Please see the logfile of installation for more details

  ---------------

  I just tried the same disk in another system, and there is no problem with the disk.  The installation program starts perfectly.  I also tried to share the optical drive to the right machine on the network and running the installation program on the machine of image problems, and it does not reach the same point at the first sign of the window installer to come with the same error.

  During this time, I was able to install some updates of Windows and that everything is up to date, install Flash Player/Shockwave, install other applications that will be going on the image for the lab, all without any problem.  I also ran CCleaner [cleaner and registry], as well as the cleaning tool Adobe Creative Cloud for CS3, which there is no problem when I ran.  I also tried to erase the files to Program Files > Common Files > Adobe which were related to the installer and try again.  Whenever I get the same error.  Other tips?

  Thank you!

  Just to let everyone know, I've already finished by wiping the machine, and then reinstall Windows and updates.  4 different technicians support Adobe could not figure it out, and at that point I was convinced that other applications on the image installed before hand had messed with the system JUST enough to only effect of the installation of Adobe and nothing else.  It is the installation that we talk as first item on a clean image.

• HARD drive can be found on LX835-D3380

  Can anyone help? Went to switch pc on lx385-d3380 and all of a sudden, that is to say no drive found.

  Hello

  The HARD drive is recognized in the BIOS?
  Go to the BIOS by pressing F2. Usually the HARD drive should appear on the first page of the BIOS.
  If it is not listed, the HARD drive was not found by the BIOS... I suppose that because of HARD drive failure.

  In this case, the HARD drive should be replaced to solve the problem.

• COM3 is not installed. Driver is not found online.

  The Device Manager shows as COM3 is not installed. A driver is not found. It seems that prevent me from upgrading to Windows 10 of 8.1Pro. Please provide a solution.

  http://support.Lenovo.com/us/en/products/desktops-and-all-in-ones/ThinkCentre-m-Series-desktops/thin...

  the drivers are here

• Disk utility can't partition [exFAT], 75 GB main drive. Error.

  Disk utility can't partition [exFAT], 75 GB main drive. Error. Trying to create a new partition Windows 10. Since then, Bootcamp is crap. Try to install it manually.

  

  Why not install Windows 10 as a virtual machine in VMware Fusion, Parallels or Virtualbox?

• Agilent Power Supply E3645A IVI Driver Communication error

  Hello world

  I'm trying to communicate to Agilent power using IVI Drivers. I join you MAX Report, all the modules installed on the system.

  When I run initialization of the VI for Agilent power, using the simulation with 'Specific Driver', no errors appear. But when I select "do not simulate", I get this error:

  Initialize IviDCPwr with Options.vi
  The primary error: (Hex 0xBFFA0011) function or method not supported.
  Development: FunctionId: 3, FunctionName: InitWithOptions

  Communicate with instruments instrument using Driver works fine, but using the Drivers IVI is not.

  I tried all the steps in this topic .

  PROMT any help will be highly appreciated.

  Kind regards.

  Shane5ab

  Hello, Tanguy,.

  I am pleased that install the specific instruments IVI - C Driver took care of things.  The differences between IVI - C and IVI - COM can be confusing at first.  I hope the rest of your application development goes smoothly.

  See you soon,.

  NathanT