ALT TAB and Windows plus button more TAB functions the two has stopped working

Similar Questions

• Catalyst Control Center window will appear to indicate that the program has stopped working properly

  Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

  Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

  Jim

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Try to install a CD "the Start-Stop software installation", but whenever I try, I get the following. Implement the application has stopped working. A problem caused the blocking of the program works correctly. Windows will close t he program and notify you if a solution is available. I sent the company and the school several times and have not yet received a response, maybe someone out there could help. Thank you!

  Ok.

  See if they have a patch for it.

  If this isn't the case, you may need to shopping for a similar program.

  Or repost in the Forum of programs on the link I gave you; they can learn more on this subject here.

  See you soon. Mick Murphy - Microsoft partner

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• Reference Dell 946 AIO windows 7 64 bit, after installing AIOC.exe has stopped working

  I was extremely upset with this problem and it seems that there are tons of discussions but none of the solutions work for me.

  I have a Dell AIO 946.

  Windows 7 64-BIT fully updated

  I installed win 7 64 driver (5 or 6 times now)

  Prints perfectly fine, when I want to Dells Aioc.exe I get the AIOC has stopped working.

  I tried the new installation after using the same thing Cleanup utility.

  usb ports modified, usb ports set to not go to sleep to save power

  The player is R145441 on dell site.

  Here is the log for when the error Stops Working:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: dlciaiox.exe
  Application version: 3.57.0.10
  Application timestamp: 4549c5c0
  Fault Module name: ntdll.dll
  Fault Module Version: 6.1.7601.17725
  Timestamp of Module error: 4ec49b8f
  Exception code: c0000005
  Exception offset: 0002e41b
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  I want to scan to PDF and cannot do with this defect of AIOC program!

  I never had so many problems with my HP they did it is super simple!  Help, please!

  Yes, all updates are performed.

  Here's what fixed it in case someone needs to know

  Right click on my computer

  Go to the properties

  on the left side, click on advanced system settings

  Under performance, click settings

  On the Data Execution Prevention tab

  Select turn on DEP for all programs and services except those I select

  Then add

  Then navigate to the folder c:\program Dell AIO printer 946\ printer Dell

  Add all of the files that are displayed

  There was some prob 8 of them... then it worked perfectly.

• The grille has stopped working and asks me to reinstall Works. Where can I get a new works?

  Original title: I have Windows 7 Home Premium with Microsoft Works.

  The grille has stopped working and asks me to reinstall Works. Where can I get a new works?

  Unfortunately, if the works is preinstalled on your system, the computer manufacturer is the best place to contact.

• I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the license recovery application, which I did, but then when I tried to run this app, it then came wi

  I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again?  Thank you, Glenn

  Hello

  Please check the help below documents depending on your operating system:

  Error: "License has stopped working". Windows

  Error "Licensing has stopped working". Mac OS

  Hope that helps!

  Kind regards

  Sheena

• Hi, I got creative cloud on my dell laptop but recently the laptop has stopped working so I got a mac, and I downloaded creative cloud on my mac, but it comes out as a trial version. don't know why, can anyone help?

  Hi, I got creative cloud on my dell laptop but recently the laptop has stopped working so I got a mac, and I downloaded creative cloud on my mac, but it comes out as a trial version. don't know why, can anyone help?

  Additionally, you can check: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• I can't install the LR. I made the account, and paid at the time of install the creative cloud wrote the application has stopped working. What should do?

  I can't install the LR. I made the account, and paid at the time of install the creative cloud wrote the application has stopped working. What to do

  Install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  Use it to install your lr.

• The bridge has stopped working and I uninstalled it, but now the CC won't let me reinstall it

  The bridge has stopped working and I uninstalled it, but now the CC won't let me reinstall it

  It seems uninstall was not clean. Please use available in the link mentioned cleanup tool to remove the CC Br entries below.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Please follow the instructions as indicated and then reinstall the CC Br.

  Kind regards

  Ashutosh

• Dell Inspiron 9400 and the charger has stopped working.

  I have a Dell Inspiron 9400 and the charger has stopped working. I looked on the Dell support site and they sell no spare Chargers.  I looked on ebay and they are inundated with Chargers dell from £ 6 to £99.    But how can I be sure that they will not be some sloppily made Chinese clone that will burn my house!

  I would have a go to repair the charger If Dell has not seen fit to the heat of welding the two halves closed!

  You can search a person selling a genuine Dell PA10 adapter.  This is what you need.

• After installing the update tabs 26.0 fox has stopped working

  I have Windows 7 on both of my computers. After updating firefox to 26 my tabs fox has stopped working. It shows that it is enabled, but I get a white screen. I can't edit or save all Web sites to the best sites.

  In fact, the developer has a new version which is awaiting review. If you want to install now until the Add-ons site admins finish to check it out, you can find it on the page of 'Versions' here:

  https://addons.Mozilla.org/firefox/addon/FoxTab/versions/

• I can't open some programs and also what indicating computer it is said GfxUI has stopped working. do what Mathilde?

  I can't open some programs and also when the computer start he says that gfxui has stopped working. What I have to do work?

  Hi, Rosemary,

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Without knowing your OS or the exact error message and everything Word to Word or the manufacturer, brand and model of your computer (especially the chipset), it is very difficult to provide you with clear instructions or recommendations; However, here is a link to another thread where someone had the same problem and there are two solutions (both different and both worth a try - if the first doesn't work, try the second): http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/gfxui-has-stopped-working/e7f88c22-7c58-4fc2-9ae9-667556d0c4fc.

  If this does not help, check out some of the alternative links on this problem in the following search: http://www.bing.com/search?q=gfxui%20has%20stopped%20working&PQ=gfxUI&SP=2&QS=AS&SK=AS1&sc=8-5&form=BB07SS&pc=BB07.  If you want, you can refine the search to include more information, such as your operating system or suite of the message and the results could be more useful.

  I hope this helps.  If this isn't the case, post back with the above-mentioned information that would help as well as what you have tried and what happened when you did.

  Good luck!

• OfficeJet Pro 8500 has more: back two has stopped working

  Two sides priting has stopped working. Print both sides "checked" but print dialog shows released a face on two sheets or "layout" began to show "long edge binding" as GRAYED OUT. Any ideas please?

  Hey @mossy21,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have options with double-sided printing to your Officejet Pro 8500 at more of your Mac 10.10 system. I can help with that.

  Here's what we will try to solve this problem:

  1. Go to your Apple icon, system preferences, printers and Scanners.
  2. Hold down the command key and click on the image to your printer on the left.
  3. Click on reset printing system.
  4. Go to Applications, utilities, disk utility.
  5. Click "Macintosh HD" on the left.
  6. Click on verify disk permissions. This should take about 10 minutes.
  7. Click on repair disk permissions. This should take about 10 minutes.
  8. Restart your Mac.
  9. Return to the printers and Scanners.
  10. Click on the button "+" at the bottom left.
  11. Select your printer.
  12. Next to the line indicating the use, click on the box and click on the name of your printer in the list.
  13. Click on Add.
  14. Try to print.

  This should allow you to print double-sided.

  If this solves your problem then please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!