Alterando IP interface da física com vms online

Similar Questions

• HA com VMS sustainability

  OLA amigos,

  I have a client that tem um Fileserver com um 1.3 to VMDK um physical Exchange 2010 com 1.7 TB of disco, este client quer fazer o P2V deste Exchange e junto com o Fileserver, em HA jogar em um cluster formed por 3 5.1 e um Dell Equallogic storage ESXi hosts, mas pelo fato das VMS are very large , are any recomendacao para isso sem gargalos em caso pane functions as no wave estas VMS are host? Seja para o HA or win fazer o Vmotion VMS sem maiores problemas a lot?

  UM Abraço!

  Ivanildo Galvão

  Ivanildo,

  main o e to maintain todos os hosts enxerguem os data warehouses docks essas are maquinas e also as uma vmkernel (para vmotion) configurada background em todos os guest is... Para o HA e o vMotion tanta difference size das VM nao faz o, wait porque o host destino ja tera access aos archives hard, or seja, não ser transmitidos terao esses pela rede.

  ABS,

• Interfacing pilot Agilent IVI - COM for U8903 Audioanalyzer of Labwindows/CVI

  When I try to use the controller Active X of CVI 2009 Wizard to create a C Wrapper for Agilents U8903x IVI - COM drivers, I get more than 100 errors "the too long method name. Is there one solution other than the edition of each name of the simple method, which is to long?

  Hey Markus.

  I just tried to create a controller for this driver and had no problem.  I have install the driver has been downloaded from here.  My only guess is that somehow FP File Format for new files by default "CVI 5.0.1 and earlier.  You can check this by opening a FP in CVI and then go to the Option"menu FP File Format.  Check 5.5 or 8.5 and later versions are selected.

  

  NickB

  National Instruments

• Extension of the user interface - javascript does not come to the top

  
  Hello

  I'm on PLM6.1.1.5 and EP 3.11. I followed the implementation of measures to extend the user interface:

  Step 1. copy the files:

  Copy the Utilities\UIExtensions\config\Core\UIExtensionScripts directory and its contents in the \config\Core < PLM4P_Home > directory

  Copy the Directory of Utilities\UIExtensions\config\Extensions\UIExtensionScripts and its content in the directory of \config\Extensions < PLM4P_Home >

  Copy the following assemblies to the SharedLibs folder of the the Pack of extensibility in the \Web\scrm\bin < PLM4P_Home >, < PLM4P_Home > \Web\gsm\bin or < PLM4P_Home > \Web\npd\bin directories:

  • PLM4PExtensionUtils.dll
  • ScriptingUtils.dll
  • UserInterfaceExtensions.dll

  Step 2: Insert the following lines in CustomPluginExtensions.xml, in the FormatPlugins section

  < name of the Plugin = "UIExtensionGSM."
  FactoryURL = "class: Oracle." Agile.PlmProcess.UserInterfaceExtensions.JavascriptLoaderFormatPluginFactory, UserInterfaceExtensions$ NameValuePair: FormatPluginNames = GSMSpecJavaScriptPlugin & amp; ScriptFiles=config\\Core\\UIExtensionScripts\\static\\UIExtensionsCore.js,config\\Extensions\\UIExtensionScripts\\static\\GSM_Variables.js ".
  / >

  < Plugin
  name = "GSMSpecJavaScriptPlugin" FactoryURL = "class: Oracle." Agile.PlmProcess.UserInterfaceExtensions.GSMSpecJavascriptFormatPluginFactory, UserInterfaceExtensions$false"/ > ".

  Step 3: update the \config\Extensions\UIExtensionScripts\UIExtensionsConfig.xml file to enable the specific extension points.

  UIExtensionGSM default has been activated.

  4:go to step < PLM4P_HOME > \config\Extensions\UIExtensionScripts\Static, has used the sample for customization 2147.js.

  None of my javascript are applied to the page. I tried simple javascript like this:

  ($(window) .load)

  function() {}

  Alert ("hello world");

  }

  );

  in 2147.js, 1004.js, 1009.js. Nothing came

  All the steps that I missed

  Thank you

  Church

  You said that by default uiextensiongsm has been activated. But I have to manually turn on UseInEditMode and UseInReadMode. Please check this.

• Call COM components as a service Windows 7 (NOT A WEB SERVICE!) via LabVIEW

  First of all, what I'm trying to do is completely new terrority for me and I've looked everywhere, impossible to find a solution. I have reviewed the following resources and tried to get out but nothing helps:

  [1] ActiveX and LabVIEW
  http://www.NI.com/white-paper/2983/en

  [2] ActiveX and COM - part I
  http://www.NI.com/white-paper/2981/en

  [3] tutorial: Configure the node of the function of the library Call to call a Simple DLL
  https://decibel.NI.com/content/docs/doc-9069

  My problem is that I got a COM which was installed to run as a Windows 7 service, always running in the background (service.msc). So far, it seems only to be an intuition that you shoul dbe able to use:

  (A) ActiveX in LabVIEW to call the COM object by name or the .dll file.

  (B) call the .dll file of the service using the library function node call

  I see the COM running as a service if I (service.msc). I see also two .dll files associated with this service (they have the same base name as the service running). Let's say the service is called "TestService" then the other two .dll are called "TestServicePK.dll" and "TestServiceXY.dll." In test ActiveX and node library function call, I tried to call the two .dll files. When I tried the ActiveX method I get "the selected file is not a .NET, type library or executable automation assembly."

  Also COM binaries were made in C++, but if I understand well there should not be a problem at least for the library call feature.

  This seems to be a case of corner.

  Actually COM! = ActiveX!

  COM uses ActiveX to implements its objects and also to instantiate and control their but COM is simply a binary model of the API and some functions to control the instantiation and the lifecycle of objects COM, nothing else. The only way to access COM objects correctly (when no ActiveX type library is provided) is to have a C (++) compiler that can analyze the header files according to interface with the interface object methods. All ActiveX controls use COM to implement the interface calling of their objects, but also adds a type library in the DLL and a few other niceties such as the properties of the object. This type library describes how to match the properties and methods of the ActiveX for real virtual table COM interface pointers.

  LabVIEW lists this type library in order to be able to interface to the COM, Active X objects interface. A pure COM library is missing all these subtleties. If LabVIEW would be favourable to a COM interface node, its configuration should allow the configuration of all the things that describes the type library. This configuration would require a lot of manual configuration details, similar to what the library node call, only a magnitude more complex. If this is not really an option.

  If your server COM DLL does not an ActiveX type library interface, the only way to access it in LabVIEW must obtain such a type library as an external interface (not possible for all COM components) or to wrap the COM DLL server by a traditional DLL, which translates the methods standard COM exported C functions then that may be called by the node library call.

  Creating a library of types from a single COM DLL is more or less unfeasable. You should at least have the original IDL file that was used to create the interface com write a C (++) wrapper for your object COM is very probably the most practical approach, but will require some good C programming knowledge as well as experience handling COM objects in C code.

• PXI Profibus interface

  I want to commuicate one module profibus PXI, who is having a serial port. Is it possible to send and receive data through serial communication? If this is not the case, what are the additional factors need for communication?

  Hi Sager,

  We have these profibus interfaces: http://sine.ni.com/nips/cds/view/p/lang/en/nid/204266

• ActiveX/COM adapter - how to assign a Variant to contain an integer

  We use a component 3 rd-party and need to interface for TestStand using COM. The interface uses a variant of spend data in various objects. We are unable to pass an integer.

  When expected contained in the variant type is a string or a double bed, the call is successful. When the expected type is an integer, the call fails. Passing a Boolean value will succeed, but only for 0 and -1.

  How we can assign an integer value to a Variant?  We can only find Int64() convert functions.

  May be a function that returns an integer type to convert a number of TestStand (double) in an integer value, but so far, no luck.

  There is currently no way to pass a 32-bit integer in a VARIANT using the ActiveX/COM adapter You can pass a 64-bit integer as you have no doubt already determined it, but teststand does not natively store numbers as the 32-bit integers and ActiveX/COM adapter currently has no way to specify a conversion of a data type Variant, so just TestStand stores the digital type it uses natively as a VARIANT.

  To call this method from TestStand, you will need to write a wrapper function that performs the conversion of the required parameter and calls the method and then call the wrapper of TestStand rather function.

  -Doug

• TDM/PDM Java interface?

  Hello, someone has developed a Java interface that can read the TOC and PDM files?  Of all the googling and poking around the site of NOR, my hunch is no, but I just wanted to ask you anyway just to be sure. In my opinion, he is a writer of header to Java (http://zone.ni.com/devzone/cda/epd/p/id/6280), questions about the external interfaces (http://digital.ni.com/public.nsf/allkb/A3663DE39D6A2C5A86257204005C11CA) and pre-existing drives C and Excel, but I see no mention of a Java API to read these files.

  Otherwise, I'm looking for confirmation that there was, and whether or not a likely to be developed in the future.  If not, how other people solve this problem?  Using JNI with the C library for the CT (S) data in Java applications?

  Thank you very much for your support.

  Derek

  PS: I didn't know where to post what I did not see a separate category of CT. Thank you.

  Here's a post of "TDM header writer Java API":

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6280

  If there is no API available for playback, it seems you need to do your own API based file formats, for the PDM, the structure of file format is here:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/5696

• Only CM, multiple interfaces

  Hi guys.

  I have an environment with a single CM and multiple devices.

  The plant manager has two management interfaces (an interface in the primary CPE) and other secondary CPE. It is this way because we are unable to use the local switch in order to create a single management VLAN.

  CPE2 - CM - CPE1

  I am ready to provide redundancy for the central Manager (connectivity) and in addition, the main important thing, provide redundancy for remote devices (if the first goes down, the devices should not lose connectivity with the CM).

  If possible, how can I achieve this? (primary/stanby?)

  The devices are also installed in this way (two connected to two different CPE management interfaces).
  The optimization is done online.

  Thanks in advance

  Hi Ronaldo,

  Not sure that I have understood your topology, but if your two CPE are just separate layer 2 way, you should look into setting up watch on the CM and the accelerators interface, see [1, 2].

  If, however, two SCE must be mapped different layer 3, there is no way to get this working, you can only save an accelerator with a single CM at a time (based on the IP address or host name). Having two different couche3 would be like having two IP addresses and names of two host during the same CM, well.

  If you want redundancy for the CM database this way, you can examine a CM Eve as well, see [3, 4]. You would need another device of WAAS to do this, however.

  Let me know, if this can help, or if I understood.

  Kind regards
  Michael

  [1] WAAS 4.x: http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v441/configuration/guide/cnfg/network.html#wp1041450
  [2] WAAS 5.x: http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v531/configuration/guide/cnfg/network.html#wp1041450
  [3] WAAS 4.x: http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v441/configuration/guide/cnfg/maint.html#wp1159476
  [4] 5.x WAAS: http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v531/configuration/guide/cnfg/maint.html#wp1159476

• SSL tunnel with another interface outside

  Hello

  I want to get a tunnel SSL VPN (with client Annyconnect) between ASA and my PC (internet) on the DMZ interface that does not have the external interface by which I come.

  We cannot do it on the external interface because the 443 port is already in use on this interface.

  Is it possible to make this kind of configuration on the SAA?

  Thank you

  Here is a link on how to configure

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807be2a1.shtml

  For the customer, in the file XLM just add the port number. For example

  VPN.mycompany.com:444

• VPN site2site &amp; VPN client dailin on the question of a single interface

  Hello dear colleagues,

  First of all, the question of information subsequently:

  Setup

  C2801 race

  (C2801-ADVENTERPRISEK9-M), Version 12.4 (25f)

  ----------                                                    ----------

  | Central | Di1 IP:80.153.xxx.xxx | DISTANCE | IP: 91.218.xxx.xxx

  | Router | <----------------------------------------->     | Router |

  -IPsec via GRE Tu1 - works | Debian |

  ^                                                   |          |

  |                                                     ----------

  |    does not work

  |---------------------------------------->-------------------

  | Cisco VPN | Intellectual property: all

  | Customer |

  -------------------

  !

  AAA authentication login default local activate

  AAA authentication login local VPN_Users

  RADIUS group AAA authorization network default authenticated if

  AAA authorization VPN_Users LAN

  !

  AAA - the id of the joint session

  iomem 20 memory size

  clock timezone THIS 1

  clock summer-time EST recurring last Sun Mar 02:00 last Sun Oct 03:00

  IP cef

  !

  username myVPN secret 5

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  life 3600

  address key crypto isakmp xauth No. 91.218.xxx.xxx

  ISAKMP crypto nat keepalive 20

  !

  Configuration group customer isakmp crypto VPN_dialin

  key

  DNS 192.168.198.4

  domain example.com

  pool VPN

  ACL VPN

  Crypto isakmp VPNclient profile

  match of group identity VPN_dialin

  client authentication list VPN_Users

  ISAKMP authorization list VPN_Users

  client configuration address respond

  !

  Crypto ipsec security association idle time 3600

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac hostb-transform

  transport mode

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA-LZS, hmac-sha-esp esp - aes comp-lzs

  !

  !

  crypto dynamic-map vpn-dynamic-map 10

  game of transformation-ESP ESP-AES-128-SHA-AES-128-SHA-LZS

  Define VPNclient isakmp-profile

  !

  !

  !

  HostB-cryptomap 1 ipsec-isakmp crypto map

  the value of 91.218.xxx.xxx peer

  the transform-set hostb-transform value

  PFS group2 Set

  corresponds to hostb-address list

  !

  dynamic map crypto hostb-crytomap 65535-isakmp ipsec vpn-dynamic-map

  !

  !

  !

  !

  !

  !

  Tunnel1 interface

  bandwidth 100000

  IP vrf forwarding vl199

  IP 10.0.201.2 255.255.255.0

  IP 1400 MTU

  IP nat inside

  IP virtual-reassembly

  IP ospf network point

  source of Dialer1 tunnel

  destination 91.218.xxx.xxx tunnel

  bandwidth tunnel pass 10000

  bandwidth tunnel receive 50000

  !

  interface Dialer1

  Description # PPPoE T-Online.

  MTU 1492

  bandwidth 50000

  IP ddns update hostname it-s - dd.dyndns.org

  IP ddns update it-s-dd_dyndns_org

  the negotiated IP address

  NAT outside IP

  IP virtual-reassembly max-pumping 512

  encapsulation ppp

  IP tcp adjust-mss 1452

  no ip mroute-cache

  Dialer pool 1

  Dialer idle-timeout 0

  persistent Dialer

  KeepAlive 20

  No cdp enable

  Authentication callin PPP chap Protocol

  PPP chap hostname

  PPP chap password 7

  PPP pap sent-username password 7

  PPP ipcp dns request

  card crypto hostb-cryptomap

  Crypto ipsec fragmentation after encryption

  !

  !

  local pool IP VPN 192.168.196.30 192.168.196.60

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 Dialer1 track 1

  IP route 0.0.0.0 0.0.0.0 Tunnel1 20 Track3

  IP route 0.0.0.0 0.0.0.0 Dialer1 254

  IP route vrf vl199 0.0.0.0 0.0.0.0 192.168.1.251

  IP route vrf vl99 0.0.0.0 0.0.0.0 192.168.3.1

  !

  The dns server IP

  !

  no ip address of the http server

  no ip http secure server

  TCP-time translation nat IP 3600

  translation of nat IP udp-timeout 600

  IP nat Pat_for_192.168.198.4 192.168.198.4 pool 192.168.198.4 netmask 255.255.255.0 type

  IP nat Pat_for_192.168.200.50 192.168.200.50 pool 192.168.200.50 netmask 255.255.255.0 type

  IP nat inside source static 5060 udp interface 192.168.200.50 Dialer1 5060

  IP nat inside source static tcp 192.168.200.51 3389 3389 Dialer1 interface

  IP nat inside source static tcp 192.168.198.4 3389 interface Dialer1 3390

  IP nat inside source static tcp 192.168.198.9 interface 5000 Dialer1 5000

  IP nat inside source overload map route dialer1 interface Dialer1

  IP nat inside interface 13001 static udp 192.168.199.3 source Dialer1 13001

  IP nat inside interface 32768 static udp 192.168.179.2 source Dialer1 32768

  IP nat inside source static udp 192.168.179.2 Dialer1 49152 49152 interface

  IP nat inside interface 64206 static udp 192.168.179.2 source Dialer1 64206

  IP nat inside source static udp 192.168.179.2 interface 7597 Dialer1 7597

  IP nat inside source static tcp 192.168.179.2 9998 interface Dialer1 9998

  IP nat inside source static tcp 192.168.179.2 7597 interface Dialer1 7597

  IP nat inside source static tcp 192.168.179.2 64206 interface Dialer1 64206

  IP nat inside source static tcp 192.168.179.2 Dialer1 49152 49152 interface

  IP nat inside source static tcp 192.168.179.2 Dialer1 32768 32768 interface

  IP nat inside source static tcp 192.168.198.4 interface 443 443 Dialer1

  IP nat inside destination list Pat_for_192.168.198.4 pool Pat_for_192.168.198.4

  IP nat inside destination list Pat_for_192.168.200.50 pool Pat_for_192.168.200.50

  !

  Pat_for_192.168.198.4 extended IP access list

  Note = Pat_for_192.168.198.4 =-

  permit tcp any any eq www

  permit tcp any any eq 987

  permit tcp any any eq 143

  permit tcp any any eq 993

  permit tcp any any eq pop3

  permit tcp any any eq 995

  permit tcp any any eq 587

  permit tcp any any eq ftp

  permit tcp any any eq ftp - data

  permit tcp any any eq smtp

  Pat_for_192.168.200.50 extended IP access list

  Note = Pat_for_192.168.200.50 =-

  allow udp everything any 10000 20000 Beach

  permit tcp everything any 5222 5223 Beach

  allow udp any any eq 4569

  permit any any eq 5060 udp

  list of IP - VPN access scope

  IP 192.168.198.0 allow 0.0.0.255 192.168.196.0 0.0.0.255

  permit ip host 80.153.xxx.xxx 192.168.196.0 0.0.0.255

  list hostb extended IP access list

  permit ip host 91.218.xxx.xxx host 80.153.xxx.xxx

  permit ip host 80.153.xxx.xxx host 91.218.xxx.xxx

  permit ip host 10.0.201.2 10.0.201.1

  !

  !

  access-list 10 permit 192.168.200.6

  access-list 100 permit ip 192.168.0.0 0.0.255.255 everything

  access-list 100 permit ip 10.1.0.0 0.0.255.255 everything

  access-list 100 permit ip 10.0.0.0 0.0.255.255 everything

  access-list 101 permit ip 192.168.199.3 host everything

  access-list 101 permit ip 192.168.199.4 host everything

  access-list 101 permit ip 192.168.199.13 host everything

  access-list 101 permit ip 192.168.199.14 host everything

  access list 101 ip allow any host 204.13.162.123

  access-list 103 allow ip 10.0.1.0 0.0.0.255 any

  !

  dialer1 allowed 10 route map

  corresponds to the IP 100

  match interface Dialer1

  !

  !

  ####################################################################################################

  SH crypto isakmp his:

  status of DST CBC State conn-id slot

  91.218.xxx.xxx 80.153.xxx.xxx QM_IDLE 7 0 ACTIVE

  80.153.248.167 QM_IDLE 12 0 ASSETS

  ######################################################################################

  SH encryption session

  Current state of the session crypto

  Interface: Virtual-Access5

  The session state: down

  Peer: port of 91.218.xxx.xxx 500

  FLOW IPSEC: allowed ip host 10.0.201.2 10.0.201.1

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 80.153.xxx.xxx host 91.218.xxx.xxx

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 91.218.xxx.xxx host 80.153.xxx.xxx

  Active sAs: 0, origin: card crypto

  Interface: Dialer1

  The session state: UP-NO-IKE

  Peer: port of 91.218.xxx.xxx 500

  IKE SA: local 80.153.xxx.xxx/500 remote 91.218.xxx.xxx/500 inactive

  FLOW IPSEC: allowed ip host 10.0.201.2 10.0.201.1

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 80.153.xxx.xxx host 91.218.xxx.xxx

  Active sAs: 4, origin: card crypto

  FLOW IPSEC: allowed ip host 91.218.xxx.xxx host 80.153.xxx.xxx

  Active sAs: 0, origin: card crypto

  Interface: Dialer1

  The session state: IDLE-UP

  Peer: port of 55033

  ITS IKE: local 80.153.xxx.xxx/4500 distance 55033 Active

  ################################################################################################################################

  Error message:

  020932: 2 Oct 21:55:14.459 CEST: IPSEC (validate_transform_proposal): No IPSEC cryptomap is to address local 80.153.xxx.xxx

  020933: 2 Oct 21:55:14.459 CEST: IPSEC (validate_proposal_request): part #1 of the proposal

  (Eng. msg key.) Local INCOMING = 80.153.xxx.xxx, distance =,.

  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

  remote_proxy = 192.168.196.32/255.255.255.255/0/0 (type = 1),

  Protocol = ESP, transform = esp - esp-md5-hmac (Tunnel-UDP).

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 400

  020934: 2 Oct 21:55:14.459 CEST: IPSEC (validate_transform_proposal): No IPSEC cryptomap is to address local 80.153.xxx.xxx

  020935: 2 Oct 21:55:14.459 CEST: IPSEC (validate_proposal_request): part #1 of the proposal

  (Eng. msg key.) Local INCOMING = 80.153.xxx.xxx, distance = ,.

  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

  remote_proxy = 192.168.196.32/255.255.255.255/0/0 (type = 1),

  Protocol = ESP, transform = null esp esp-md5-hmac (Tunnel-UDP).

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 400

  #################################################################################################

  I tried to understand where is my mistake, can someone help me find it?

  Thank you very much

  concerning

  crypto map hostb-crytomap 65535 ipsec-isakmp dynamic vpn-dynamic-map
  

  is the fault of typing in the name as in your original config?

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• need details for yellow interfaces

  Hello
  
  can someone please explain on yellow interfaces in odi.
  
  Y at - there is no major difference it compare to normal interfaces.
  
  
  Kind regards
  SH.

  Hi HS,.

  They are temporary interfaces and a new feature in 11g to get around the need to fill the temporary tables, they will produce online select statement (a little like what did OWB) and reduce generation of newspapers and access disks when done correctly.

  Please take a look here:
  http://odiexperts.com/how-to-create-a-temp-table-in-ODI-interface
  http://www.rittmanmead.com/2011/06/ODI-11g-new-mapping-and-interface-features-part-1/ (at half way in the post)

  Rgrds
  Alastair

• How to design the user interface of Indesign plugin cs6?

  Design of UI to the custom help c ++ library (SDK) for pluging is a work very tedious .so when I search on the net I found that we can do to help Adobe Creative Suite Extension Builder but I don't know how to use it to develop the user interface for the plugin and how to enable the management of events in this UI. I read a lot of document about it on the net, but they have all created a lot of confusion in my mind if someone can help me to know the steps I have to follow to develop the plugin using the this or whatever technology (action script, JavaScript etc)

  If you want to develop using Creative Suite Extension builder Extensions so I think that this is not the right forum for you. Thanks for posting your specific queries on the below mentioned link hotel

  http://forums.Adobe.com/community/creativesuites/cs_sdk

  To give a brief of how to develop the interface using JS ScriptUI user allows you to develop your user interface, it's a quick and an OS-independent approach to the development of the user interface. The user interface created using JS comes next. You can see the following link for more help on ScriptUI

  http://www.kahrel.plus.com/InDesign/scriptui.html

  I did not much info about the development of the CS SDK, but I can point you to one direction more than the dev called hybrid plugins that the user interface is created in CS SDK and appropriate methods are exposed plugin C++ (improve the script object model) to be called by the code CS for too and for communication between these two modules of code.

  Hope these pointer help you get started.

  Thank you

  -Manan

• Which one i use API or Interface?

  Hi guys, EBS provide us APIs and also confuse Interface tables for integration.i to use.there is any circumstance or any general rule that, in this case, we should use table API or interface
  Thank you

  Hi shakeel.

  Hi guys, EBS provide us APIs and also confuse Interface tables for integration.i to use.there is any circumstance or any general rule that, in this case, we should use table API or interface

  Please check below links, I belive you can find some answer to those who:
  Technical use of customer and CAW-API Interface [269121.1 ID]
  http://www.oracleappshub.com/API/APIs-or-open-interface/
  http://Oracle.ITtoolbox.com/documents/APIs-or-open-interface-13331

  You can also check:
  Interface & API
  PLL Vs Vs api interface

  It may be useful

  Respect of
  HELIOS

• can not locate the jar file that contains com.bea.cache.jcache.cacheLoader

  Hello
  
  I'm trying to create a CEP Application in which an adapter look in the Cache. I knew that in this case, the adapter must implement the interface "com.bea.cache.jcache.cacheLoader" Interface. I see that this interface and the package (com.bea.cache.jcache) is not available in the file wlfullclient.jar.
  
  Can tell me where can I find the Jar file that contains the perl package, I mean any place where I can download or a steps I follow to get this jar file.
  
  Thanks in advance for your time,
  Regnier
  
  Published by: Raja Kumar April 1, 2010 08:19

  Hi reda,.

  It should be in modules/com.bea.core.cache_1.5.0.0.jar or a file with same name

  Andy