Alternatives of normalization of volume to iVolume and SoundCheck

Several years ago, I found there is not enough volume of SoundCheck standards capability when you play a large number of titles through the lists of reading, or simply hanging out 'all '.  I have about 7000 titles of my iTunes library, more of which came from downloads to CD and non-iTunes torn, but there are some iTunes downloads in there also, the volumes are in every sense. Too often I was reached for the volume control on everything I used to play music through a wired / wireless iPhone and allows you to manually adjust up and down depending on the case.  So, I bought an iVolume license, and I was very happy with the product since then.  It does a great job of normalization of the volume in a large number of titles iTunes, very quickly and easily.

Unfortunately, I was able to install iVolume on a brand new 64-bit Windows 7 computer.  The continuous iVolume installation routine to tell me that I don't have iTunes installed when clearly I do, and I followed the advice of the developer to simply follow the advice of iVolume - that is, reinstall iTunes and restart it, over and over again, although this was lucky.  I saw at least another one on the advice of a person displaying the exact same installation problems on a Windows 10 system, at least 15 other 'followers', so I know I'm not alone on this installation problem. From now on, nobody intensifies to recognize, have or solve these installation problems. The developer is shaking his head, saying: "it's weird," and asking me to restart my computer.

It is the last piece of software in a long line of applications installed on my computer over the last week and change and I cannot sync my iOS devices to this new computer for personal and professional purposes more important until I get this rectified standardization iVolume/volume thing.  That's because it now, my iPhone not synchronized has still all of my tracks on it, with the volumes already adjusted by iVolume.  My plan all along was to destroy only the iPhone and set it up as new, synchronized with my brand new iTunes library, who is ready and willing to go with the exception of iVolume.  So if I sync, I lose the iVolume normalization of volume changes and go back to all that is provided by one SoundCheck.

Once more, years after a previous, so I need to look at alternatives to iVolume for Windows, for the normalization of the volume in a library of 7000 songs iTunes music.  And years later, there still do not appear to be alternatives out there.  Hats off to iVolume for cornering the market.  The only thing I've come across is MP3Gain with a AAC plug in, which seems old, scary, far from being easy to use, some irreversible, difficult to use, do I continue?  I need a reliable application of normalization volume easy to use Windows based as iVolume, or iOS application that can do the normalization of the volume level of the device.  I'm shocked after all this time, no one seems to have imposed the normalization of the volume as a show continues in the iTunes environment. SoundCheck alone is not a sufficient solution. There have got to be some audiophiles big time out there shaking their heads (and ears) each time that they play a playlist or shuffle of large amounts of tracks in their iTunes library and adjust the volume.  Somebody happened upward with a Plan B here I am missing, or do something on Mac computers that I can't take advantage of in my Windows environment.

Sorry for the mug shot, but I am not happy with this situation iVolume and lack of support to solve.  I'm ideas, maybe someone else out there has something.  Thank you to read my message and my rants, I welcome all constructive responses.

I'm shocked after all this time, no one seems to have imposed the normalization of the volume as a show continues in the iTunes environment.

In fact, complaints about the poor performance of iTunes SoundCheck were frequent on this Forum, several years ago, but have been minimal in recent times.  In fact, it seems that Apple has improved.  Although the official Apple document is all too trivial than ever (see Use Sound Check in iTunes to transform the song volume consistent - Apple Support ), some audio detectives have detected improvement.  See http://productionadvice.co.uk/sound-check-album-mode/ .

Tags: iTunes

Similar Questions

  • Why my volume goes up and down during playback of music on YouTube?

    I listened to a few songs on YouTube channel & the volume goes up and down by itself.  How can I stop this? My computer is Lenovo & its pretty new, nothing wrong with it.  Are there other buttons that I miss?  Do not use to be like this, please help?  I want to just listen to my music without having irritated by this problem :(

    Hello

    1 did you do changes on the computer before the show?
    2. not this problem only occurs when you play music on YouTube?
    3. what browser you use to access YouTube?

    Method 1:
    You can update the latest version of the flash player and check:
    http://get.Adobe.com/flashplayer/

    Method 2:
    You can open Internet Explorer, preferably to a page that needs to play sounds.
    a. click on the volume icon in the windows system tray (in the lower right corner of the taskbar) and then click on the link titled "Mixer".
    (b) a panel will open showing the levels of individual volume of applications running that play sounds (you may need to scroll right to see all of them).
    c. ensure that belonging to Internet Explorer volume level is set correctly.
     
    Method 3:
    If the problem persists you can perform the clean boot, this problem may occur if a third-party program, the origin of the problem. Placing the computer in a place clean start State and resolve the problem. You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

    Method 4:
    Alternatively, you can perform the steps in knowledge base article:
    The video problems with Internet Explorer
    http://support.Microsoft.com/kb/2532294

    You can also visit the links:
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
    http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  • Volume down lower and lower

    WWhy is my volume go lower and lower while watching something on my apple tv

    Is what version of ATV?

    If you've programmed the remote to control the TV volume, maybe it's mad crazy go on low voltage. Try reloading, or new batteries, in function.

    Try turning off the "reduce loud sounds" ATV audio mode, if they are available. He might try to save your hearing...

  • Volume goes up and down during playback on Qosmio G55-Q802 MP3

    I just bought a new laptop from Toshiba with Vista Home premium.

    When I'm playinh of MP3 files, the volume goes up and down.

    When there is a soft part in the song the volume increases and when instruments of start to play more strong volume goes down.

    Can anyone help me please with this problem?

    Hello

    First of all, it would be really interesting to know which laptop model you have

    In addition, I would like to know if you have tested the MP3 files using different actors

    Have you noticed the same sound problem using WinAmp or another free software?

    Check it!

  • How to install volume control program and retrieve the sound icon in the start bar

    How to install volume control program and retrieve the sound icon in the start bar

    He runs this Microsoft Fixit usually solves http://support.microsoft.com/kb/319095

  • Windows 7 backup skipped image system because one of the critical-volumes backup cannot be included for backup. Make sure the volume is online and is formatted NTFS. (0 x 81000032)

    After using the backup of Windows 7, I get the following error message:

    Backup Windows jumped backup system image because one of the critical volumes cannot be included for backup. Make sure the volume is online and is formatted NTFS. (0 x 81000032)

    The backup is set to include an image of disk system: RECOVERY, DRIVE (d), OS (c :))

    "RECOVERY, DRIVE (d :))" in car is a partition of 2 GB of the hard drive internal, such as configured by Dell, and it is formatted in FAT32.  I tried to reformat the NTFS volume, but were unsuccessful.  I also looked at a certain way to omit this volume, but have still been in vain.

    Can anyone help?

    Thank you.

    Do not assign a drive letter to the partition recovery/player. Open "Disk Management" and decommissioning (without drive letter) and backup and restore performance.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Windows 8.1 lost the capacity of the volume, brightness keyboard and not let me download my Norton software.

    Original title: windows 8.1

    upgraded to 8.1 from 8 on a new Toshiba laptop purchased in may 2013.

    with 8.1 lost the capacity of the volume, brightness keyboard and not let me download my Norton software.
    No matter what is said, Adobe flash does NOT work in windows 8 and won't let me not download it from adobe.
    summer on the phone with technical support both windows and Toshiba, each fingers towards each other, saying that it will take a few months to coordinate the software updates.
    updates on this?

    8.1 is a beta and has a lot OF known issues under development and lot of unknown problems that have not yet been discovered.  It should be downloaded only by those who are comfortable, dealing with the problems of a trial version of the software.

    Lost the brightness controls and volume: do you need a driver. Your computer manufacturer may not have built their hardware drivers for Windows 8.1 control again.  They are not forced to do it to the beta-test system, so "use at your own risk.

    "Unable to download Norton".  What is the error you get?  Is this a problem with the download from the Norton site, or the installation process it?

    "Adobe Flash does not work".  Yes it does, it is integrated and you don't need to install it.  Just go to any Web site that uses flash and it will take care of itself.

    "Toshiba and Microsoft Point fingers"  Toshiba is not necessary to press the test system for windows 8.1, and Microsoft provides no support for the test software.  That is why they you warned that the 8.1 has many known and unknown problems and warned against install unless you like to manipulate and test out these problems.

    Looks like you need back to Windows 8 and wait for the final version.

  • Have volume of CS3 and CS5 licenses I need to disable. Any ideas? The customer support is not available.

    Have volume of CS3 and CS5 licenses I need to disable. Any ideas? The customer support is not available.

    http://helpx.Adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

  • Satalite P100-188: Sound Volume low quality and no energy saving.

    Hello
    I already owned the Satalite P30 - 110 and found the sound quality very good - so I chose to upgrade to the P100-188 as a logical step but at a higher price.

    I found that the quality of the sound on the P100-188 is far below and even quieter and more slender, almost seems like a cheap passive speakers for PC but stronger together.

    Is it likely that my new laptop is down or is it a normal question on the new model?
    If this is a normal problem, I regret the purchase as its is important to me.
    The Power Saver utility that I liked in the P30 is also omitted from the P100. Can you please tell me if Toshiba intend publishes a software update to provide what I want to leave the laptop running in different operating modes depending on how I want to use it for example (downloads, etc).

    Also how to adjust the brightness of the screen? It was a feature in the TPS Toshiba Power Saver.

    Hello

    As far as I know the Toshiba Power saver is installed on many laptops Toshiba, but not on everything!
    It seems that the Satellite P100-188 was delivered without the Toshiba power saver.
    In this case, Windows power management control power options.
    You can define and save also different eating patterns in the Windows power options.

    On the sound: it's not easy to tell if it s a normal question.
    First of all I recommend to check sound and audio devices and make sure that the volume is set at a higher level.

  • Use of 'root' for the system volume is 100% and/dev/md0 is full

    Hello

    I recently started to receive notifications that the use of 'root' volume of my system is 100%

    I went through all the files and it seems that the culprit is/dev/md0

    I don't have any add-ons installed, and this NAS solution is specifically used as a backup to another NAS. It uses ReadyNAS Replicate for backups.

    Here is the output of df - h and df - i

    I tried commands like this:

    du - csh/var
    du - csh/var / *.

    And the problem doesn't seem to be in these directories. Very low use it.

    This error started appearing on the day that I got a copy no error of ReadyNAS Replicate that gave me an Exit Code: 11 (error e/s files)

    Can someone help me solve this problem?

    The reason why you could not find, was that at some point, your encrypted volume was not mounted (perhaps the USB is not was connected when you start the NAS server) and a repeated backup job is filled with the partition of the OS on the NAS.

    When you have looked at the system, the data volume has been mounted. There was data under/data on the partition of the OS, but could not say that.

    I passed on a summary of what has happened to our engineers and am waiting for their suggestion. However as it is a long weekend in the United States I don't expect an answer at least a few days.

  • How to reset the volume of C and D cacacities?

    The C drive capacity is about 20 MB and the capacity of the disk D is approximately 59 MB. C must be greater than D for a faster start. How to reset the volume? Can I use CD to my computer?

    Hello, WillyGunn,

    Do you intend to reinstall the OS?

    You can repartition this disk.

    I can I repartition my hard drive

    http://Windows.Microsoft.com/en-us/Windows-Vista/can-I-REPARTITION-my-hard-disk

    A list of third-party disk partitioning software

    http://en.Wikipedia.org/wiki/List_of_disk_partitioning_software

  • question about volume license cd and retail key__

    I am in the process of a computer repair (bad mem and corrupted os). The xp operating system installation cd only I have is for a volume license. As I intend to sell or donate a computer, for obvious reasons, I don't want to put the volume license key in the public domain. The former owner has the disc with a touch of detail record but lost the cd.

    The question is can I use the cd volume and use the retail key?

    NO.

  • DV6 1007TX best components (volume, CD track and wireless controls) are inadmissible

    The components of the page on my 1007TX dv6 recently stopped working.  Therefore, I am unable to connect to a wireless network or adjust the volume via the component from the top of the page, only via the volume control software.

    I tried a system restore, and it did not work.  I have reinstalled the wireless drivier, even once, has no difference.  I'm also an error "CNDNDIg has stopped working", I don't know if this is related.

    Any idea on how to get the top of the graphic component page works again and what is the error of CDCNDIg?

    Hello

    This can sometimes be caused by a buildup of static electricity.  Stop the laptop, remove the AC adapter and then remove the battery.  Now, press and hold the button of power for a good 30 seconds.  Reinsert the battery, plug in the power adapter and start the laptop to see if it contributed to the issue.

    The file you mention belongs to Canon Digital software, you may need to uninstall this software, restart the computer and then reinstall it (or if there is a version made software updates, install this).

    Best wishes

    DP - K

  • Z5 Premium - low volume in anticipation and calls incoming, but not in its selector

    I tried everything regarding this issue, but I can't find a solution.
    It also happens in safe mode.
    It has been like this since I got it several months ago.

    When I go to 'Sound & notification' and adjust the ringer volume to full, the top speaker sounds just.
    This is the same volume when I get calls.

    But when I go to 'Ringtone' and 'Sound picker' and play any ringtone, the top speaker emits much higher.
    It's the volume that I want when he calls.

    Even in the "Diagnostics" speaker emits as it should.

    So clearly the speaker works fine, but it's as if he plays the ringtone of a different medium or something.

    I have the latest update on the phone.

    Any help would be greatly appreciated.

       

    If someone else wondered about the same problem, here is the answer I got from Sony.

    * "The ringtone will not play with a full volume of the earspeaker, compared to when you listen to other music playing other media." "This avoids the volume was too loud when you hold the camera in your ear.*.

    And if anyone knows a work-around, I'll be glad to know.

  • Volume icon missing and disabled in the taskbar properties

    I noticed my icons for volume and network of the taskbar for a week and finally decided to try to repair. I checked the properties of the taskbar and found volume and network selections have been disabled. So I rebooted.  Now I have the clock and network icons, but no battery icon and I don't always have the sound icon (which was the one I wanted) and these two are disabled in the taskbar properties. Any advice on how to reactivate these icons? I have Vista and I am currently on updates.

    I noticed my icons for volume and network of the taskbar for a week and finally decided to try to repair. I checked the properties of the taskbar and found volume and network selections have been disabled. So I rebooted.  Now I have the clock and network icons, but no battery icon and I don't always have the sound icon (which was the one I wanted) and these two are disabled in the taskbar properties. Any advice on how to reactivate these icons? I have Vista and I am currently on updates.

    Use the tutorial below:
    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    Note: Use the method two or three depending on what version of Vista you have.
    Whe finished, restart (close and turn it back on).
    Now after restarting, go to the taskbar of routine properties and click on these missing icons.

    t-4-2

Maybe you are looking for