Always problems of brightness after only 7 installed

Similar Questions

• Problem with starting after trying to install XP.

  I have a Samsung NF110 netbook with an external cd drive. The hard drive has two partitions - c: and d:. C: installed Windows 7 and d: was empty. I wanted a machine to dual-boot with Windows 7 and XP in different partitions. I tried to install XP on the d: partition but during installation only choice was installed on the c: partition (replace Windows 7). I decided to do it and then I hope to install Windows 7 on the d: partition later. The installation process copied all files XP from the CD, but when it came to restart it has always tried to boot from the cd and start the implementation process. I tried to remove the cd drive, and then it came with NT invalid Boot.ini detect failed. I tried various suggestions found on forums to fix this. The most popular seems to be to get to the Recovery Console, and then type bootcfg/list and bootcfg /rebuild. When I do bootcfg/list it shows a Microsoft Windows XP Home Edition installed. However after the rest of the instructions for example enter the loading and do/fastdetect identifier does not solve the problem. Someone at - it any other suggestions to correct what I guess is an MBR corrupted. Wouldn't be better to just format the entire hard drive and start from scratch?

  Thanks in advance for any help offered.

  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  You must install the oldest OS first, so XP first then win 7. XP doesn't know how to run win 7, so if you install after win 7, you will lose the ability to boot under win 7. A repair of Windows 7 installation can fix.

  install xp and when you do, be sure to create 2 partitions, one for xp and one for win 7

  http://apcmag.com/how_to_dual_boot_windows_xp_and_windows_7_xp_installed_first.htm

• HP 15-r078tu Notebook PC: problem of brightness after upgrade to Windows 10 - r078tu

  I use HP 15-r078tu Notebook PC.  After the upgrade to windows 10 laptop brightness was awkward.  I always work with a minimum brightness.  But after the upgrade of the brightness of the screen is high, even when I set minimum height in power options.  When I keep up it is brighter than before.  And after the upgrade, the brightness control buttons work abnormally.  Reduce the brightness button is increases the slide of the brightness and the brightness button increase it decreases.  After a reboot, it works fine, but only after a reboot whenever you turn on the laptop.  I checked all updates in assistant hp support and updated all the drivers.  I also checked the online solutions for

  1. change the display adapters in Device Manager

  2. check updates

  3 go back to the previous driver and even after change to basic brightness microsoft display adapter is the same (he doesn't) even fit in (buttons) hardware / software (power options).

  

  Nothing has worked.  Any solution please?

  This driver is listed under the W10 drivers section, even if it's for W8.1 and more.

  You might want to try this one.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp69589.exe

  If this one doesn't work either, unfortunately, I don't have any other suggestions for you to try.

• Any update on the problems with Safari after you have installed the new update?

  Any update from Apple. How long this problem will be resolved?

  What is the problem?

• ENVY 15 - 3040NR problem of brightness after upgrade to Windows 8

  I have upgraded to windows 8 pro. Put updated and reinstalled all the drivers available on the website of HP drivers. The brightness is not set. I can see the cursor and move it, but it makes no difference. The keyboard shortcut keys are also display the osd for brightness adjustment and it adjusts to the bar, but the brightness is the same. Help, please!

  Hi Executioner,
  
  Remove Windows 8 may be the best solution for you, as support for the brightness, the controls do not seem to be included in the latest video drivers. Windows 8 should work well on the phone for the most part; However, until the real drivers are available for the hardware, issues like these can happen as all functions will not be supported without them. I suggest to keep an eye on your laptop support page above for Windows 8 drivers to be updated (it seems that the last update was 2012-10-18, version 9.0.0.0)
  
  I hope this helps.

• Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes

  Hello everyone, after correctly installed the creative cloud adobe now I want to update, the program also tells me to do. But the problem is that connection only goes up to 2% and stops, every time freaking. Weeks before. What is the problem? And Yes, there is an internet connection

  Good afternoon

  Thank you for your response. It was the right solution, but I missed something in your response. I had to start several times to download / update. Throw/delete (or the procedure of the description) files don't get past not like you described, but I tried something myself and it worked finally.

  But I have to ask: If this problem continues, of course, that a workaround is available, why is this a problem in the software persists, exist?

  Maybe you can't give answers, but I'm just wondering, well thanks for your help.

  Green eyes greeting

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• After the third full install of Photoshop here always the same answer after opening provisional "could not initialize Photoshop because of a program error."

  After the third full installation of Photoshop that's always the same answer after provisional opening "Failed to initialize Photoshop because of a program error" someone can tell me what to do flat close all, des-Installer, clean, has chosen already made for the installation of designer Cloud, which begins to... (perhaps regret installing it, 30 days may not hold out of)

  Hi DanielDL,

  Please open the finder, click go and select go to folder and type / library and press ENTER.

  Go to the Application Support/Adobe/color and settings folder and rename it to settings.old

  Then try to run Photoshop and check if the problem persists.

  Thank you

• Creative cloud updates for after effects CC, CC InDesign, Premiere Pro CC and CC FAIL ALWAYS Prelude. Other updates arrive and install, but not those four.

  Creative cloud updates for after effects CC, CC InDesign, Premiere Pro CC and CC FAIL ALWAYS Prelude. Other updates arrive and install, but not those four. This happened more than three months. When Adobe will fix this?

  Mac OS 10.9.2 and 10.9.3

  I ran repair disk, I run permissions repair several times. I've disabled the creative cloud together apps and uninstalled and reinstalled and it's always the same.

  Please fix this Adobe, or disclose information about how to solve this problem. I have to pay for that month and you are NOT fix every month.

  

  These errors appear in the Console:

  17/05/2014 13:35:08.732 Adobe Application Manager (Updater) [55745]: /Volumes/AdobeMediaEncoderTrial_64-7.2.2-mul-AdobeUpdate/AdobePatchInstaller.app/Contents/MacOS/AdobePatchInstaller reading: unknown error: 1000

  17/05/2014 13:35:08.732 Adobe Application Manager (Updater) [55745]: error during the processing of the data: invalid argument

  17/05/2014 13:35:08.000 kernel [0]: hfs: disassemble insiders on AdobeMediaEncoderTrial_64 - 7.2.2 - mul-AdobeUpdate on disk2s2 of the device

  17/05/2014 13:35:22.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:22.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:22.673 Adobe Application Manager (Updater) [55765]: /Volumes/AdobeMediaEncoderTrial_64-7.2.2-mul-AdobeUpdate/AdobePatchInstaller.app/Contents/MacOS/AdobePatchInstaller reading: unknown error: 1000

  17/05/2014 13:35:22.673 Adobe Application Manager (Updater) [55765]: error during the processing of the data: invalid argument

  17/05/2014 13:35:22.000 kernel [0]: hfs: disassemble insiders on AdobeMediaEncoderTrial_64 - 7.2.2 - mul-AdobeUpdate on disk2s2 of the device

  17/05/2014 13:35:41.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:41.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:41.046 Adobe Application Manager (Updater) [55783]: /Volumes/AdobeMediaEncoderTrial_64-7.2.2-mul-AdobeUpdate/AdobePatchInstaller.app/Contents/MacOS/AdobePatchInstaller reading: unknown error: 1000

  17/05/2014 13:35:41.046 Adobe Application Manager (Updater) [55783]: error during the processing of the data: invalid argument

  17/05/2014 13:35:41.000 kernel [0]: hfs: disassemble insiders on AdobeMediaEncoderTrial_64 - 7.2.2 - mul-AdobeUpdate on disk2s2 of the device

  17/05/2014 13:35:55.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:55.000 kernel [0]: disk2s2: 0xc3e8 (UNDEFINED).

  17/05/2014 13:35:55.068 Adobe Application Manager (Updater) [55800]: /Volumes/AdobeMediaEncoderTrial_64-7.2.2-mul-AdobeUpdate/AdobePatchInstaller.app/Contents/MacOS/AdobePatchInstaller reading: unknown error: 1000

  17/05/2014 13:35:55.068 Adobe Application Manager (Updater) [55800]: error during the processing of the data: invalid argument

  17/05/2014 13:35:55.000 kernel [0]: hfs: disassemble insiders on AdobeMediaEncoderTrial_64 - 7.2.2 - mul-AdobeUpdate on disk2s2 of the device

  

  KHolz I recommend you review the files Setup logs to update Adobe that you are trying to apply.  Please see Troubleshooting install problems with log files. CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for more information on how to locate and interpret your Setup logs files.  You are invited to post specific errors that you will discover in this discussion.

• Battery problems with 4S after ios 9.1 installed

  After 9.1 install storage battery on my Iphone 4S down 12 to 18% per hour and hold on 50% power for there to be recharged. The stop function does not work now so I can't save energy when I am out by phone turning off the coast. Lost iTunes and the voice feature does not work on Google maps. Basically a screw - up complete. Any suggestions? Thank you.

  Mine is exactly the same since the last software update. I replaced the battery and restored to factory settings, and it's always the same.

  Please can rectify you this ASAP as I know having a teenage stepdaughter walked home from school in the dark with no phone battery left by the time she finishes school?

• problem with MAX after installing LABVIEW 10

  Hello everyone, I have a serious problem I installed labview 10 yesterday on 2 laptops, one of them works perfectly, however, the other gave me a two erros

  1.http://digital.ni.com/public.nsf/allkb/6CA56E2DDBCCA06086257591006141EE

  2. http://digital.ni.com/public.nsf/allkb/F24AA9FB6A3A0E9D86257539006141BE

  I tried the solutions above in the link, but it was all futile. can someone please suggest me what would be the problem? I had already LV8.0 on the laptop which is the cause of the problem. I tried to re - install the disk driver given

  for me by NEITHER, but no luck.

  When I started the laptop for the 1st time, there was a mistake in saying DOS command prompt: DATABASE ERROR and I cancelled the error!

  In addition, Labview works fine, its only MAX who has problems. is there a way I can only MAX to uninstall and reinstall? Please help me...

  Thank you

  Sorry CrackJack

  Try this one http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C?OpenDocument    

• Problem after upgrade or install Microsoft SP2

  Hello
  I have a windows xp computer 2004
  I recently had to format my pc and when I reached and installed windows net framework 2 which is correct, but when I installed microsoft service pack 2, that would no longer be my pc access upgrades from microsoft or some other web pages!
  I received the message cannot display the page and no internet conection when I'm connected to the internet?
  I can get the correct browser page
  So I had to uninstall SP2 for microsoft access
  I tried updating my drivers, but have been informed that there is no better match!
  My pc is now at the stage where it wants to install the SP2 of Microsoft but I don't know how to avoid or solve the problem that I get that I reinstalled SP2 about 3 times
  because I contacted help and support just to be told to go to the FAQ site "very useful and not."
  I would be very gratefull if anyone can help me with this quest!
  Thank you very much
  wazuup

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP2 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• Hello, could someone tell me how to install Photoshop, Lightroom and first? I had a subscription to Adobe and installed all three versions on my new Lenovo Erazer 510 which, unfortunately, has stopped working after only 15 days. The device

  Good evening , someone pourrait inform me How to install Photoshop, Lightroom and first? I bought a subscription Adobe and installed all three versions on my new Lenovo ERazer 510 which, unfortunately stopped working after only 15 days. Le device has been in service for forty days and I do not know How do I reinstall your applications. I tried by my Adobe account, but without results. Thank you.

  These FAQS should help you:

  FAQ: How to download and install the Adobe Creative Cloud Desktop App?

  FAQ: How to download and install creative cloud applications?

  FAQ: How to launch creative Cloud Apps