ENVY 15 - 3040NR problem of brightness after upgrade to Windows 8

Similar Questions

• HP 15-r078tu Notebook PC: problem of brightness after upgrade to Windows 10 - r078tu

  I use HP 15-r078tu Notebook PC.  After the upgrade to windows 10 laptop brightness was awkward.  I always work with a minimum brightness.  But after the upgrade of the brightness of the screen is high, even when I set minimum height in power options.  When I keep up it is brighter than before.  And after the upgrade, the brightness control buttons work abnormally.  Reduce the brightness button is increases the slide of the brightness and the brightness button increase it decreases.  After a reboot, it works fine, but only after a reboot whenever you turn on the laptop.  I checked all updates in assistant hp support and updated all the drivers.  I also checked the online solutions for

  1. change the display adapters in Device Manager

  2. check updates

  3 go back to the previous driver and even after change to basic brightness microsoft display adapter is the same (he doesn't) even fit in (buttons) hardware / software (power options).

  

  Nothing has worked.  Any solution please?

  This driver is listed under the W10 drivers section, even if it's for W8.1 and more.

  You might want to try this one.

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp69589.exe

  If this one doesn't work either, unfortunately, I don't have any other suggestions for you to try.

• HP-431. Can't change my monitor resolution and screen brightness after upgrade to windows pro 8.1

  I can't change the resolution of my screen and the brightness of the screen after I upgraded the Windows of windows 7 ultimate for windows pro 8.1 build 9600

  I have already installed the graphics card, but I can't change my resolution of more than 1024 x 768

  My laptop is HP 431 with processor intel core i3 - 2310 m 2.10 GHz, AMD graphics 7450 M DDR3 1 GB HD (I don't know why, but I have already installed graphics AMD HD series 7400 M because my laptop is not compatible with the other AMD graphics), 64-bit OS

  I think that's the problem
  http://prntscr.com/3mf9l5
  What do you think guys?

  Please, help me

  Thank you

  I'm sorry that this driver has not worked.

  The pilot I posted should be only for laptops with the series 7 Intel chipsets.

  I guess W8.1 is not in charge of your model.

  You can see if this W8 driver works, but I think that nothing is going to work for this model.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_110852_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• Problems with fonts after upgrade to Windows 10

  After the upgrade to Windows 10. Some of the police are white with black outlines makes it difficult to read a few pages. I refreshed and reinstalled firefox and it's still there. I disabled and deleted all the addons and it's always the case.

  Both pis. My only solution is to delete the font cache. Restart the PC and uncheck the allow the Web Sites to choose their own and simply used the Arial font. I can read very well now. For some reason any double check the last option is by default the text to look like that. Does not occur in Google Chorme then Yes.

• Envy 14 Sellkbook 14-k027cl: available after upgrade to Windows Mobile Broadband connection no. 10

  After the upgrade to Windows 10, there is no option to connect to the T-mobile Mobile Broadband. In the Device Manager.

  HP hs3114 HSPA + broadband device enumerator Mobile USB has a! next to him. When I look at the properties, the device status is:

  This device cannot start. (Code 10)

  The device is not in a valid state to perform this request.

  touchabu

  After the upgrade, please activate the, net

  install the frames

  Control Panel > turn Windows feature on net. 3.5 a 4.6

  reset

  the new HP hs3110/hs3114 pilots Mobile Broadband

• HP DV6-1240eo problem: "Volumebuttons" lost after upgrade to Windows 7

  Hello

  I have a problem since I factoryresetted my HP DV6-1240eo. It's original is Windows Vista, so first I installed as first of the factory (after the factory reset) and then used the HP disks for a Windows 7 upgrade.

  Everything I did to get rid of a bunch of * beep * which makes the computer slower.

  At the moment I can't use these buttons that I took a photo of (the volume bar and mute button, on the left. Symbol wireless works), because I don't really know what they are called or how I managed to get them back to work with Windows 7. They worked before the factory reset, so it's a complete mystery, why they do not work now.

  Any suggestions?

  

  Install the software the HP Quicklaunch supports the server.

• Laptop of HP Envy 15 ts: limit of volume after upgrade to windows 10

  I have improved the 8.1-10 victory and now I can bearly hear the speakers, so I use headphones remain difficult to hear. so I looked up the good beats icon his party went to all programs cant find beats audio. all levels of video are 99 or 100.

  Thank you

  Hello

  The IDT package in my previous link should also install the GUI bat - if it doesn't, let me know.

  DP - K

• ProBook 4520 s camera issues after upgrade from Windows 7 to Windows 10

  ProBook 4520 s has problem with webcam after upgrade to Windows 10.

  Skype and other software do not have access to the camera.

  Drivers installed after the upgrade - universal HP (Realtek driver) looks OK in Device Manager.

  FIX:

  -Deletion of Arcsoft Camera sharing (installed on Windows 7 at first) in the Device Manager.

  -Download and install PC Camera Driver from Realtek Realtek support on site area:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=30&PFID=43&level=4&Conn=3&DownType...

  NB needs to restart.

  Skype now see camera and works OK.

  Solved.

• HP Officejet Pro 8500 a A910a: problem formatting of printer after upgrade to Windows 10

  After the upgrade to Windows 7 to 10, some printed documents very well while others print in close columsns of 15 letters causing a document 1 page run 6 to 8 pages long and useless.

  I downloaded the latest driver from HP and used their diagnostic tests.  I used Windows Diagnostics.  They suggest no action.  I contacted Microsoft 3 times and technicians turned out to be unnecessary; It was suggested that finally back to Windows 7.  The printer works just great.  This printer is no longer under warranty.  I have a same printer which works well on another computer running Windows 10.

  I would like to know how to solve this problem caused by the upgrade to Windows 10.

  Wing wrote:

  I use Outlook.  Previews all looked normal.  I had problens with printing of emails but have been able to print a PDF document.

  Hi Wingtip,

  Please follow these steps to try to resolve the problem:

  1. open outlook

  2. double-click on the email address that you want to print (the email must open in a separate window)

  3. click on file and then print

  4. in the print window, select your printer and click Print below options.

  5. in the window options printing, make sure that the print style is set to memo, and then click Page layout

  6. click the paper tab, and set the margins to 0.50 '' on all sides. Also make sure the paper type and size is set to letter.

  7. click OK and then try to print.

  Please let me know if this helped.

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• I will face any hardware problem after upgrade to Windows 10?

  Original title: upgrade Windows 10

  I have a Dell Vostro 1015 running windows 7 Professional. I am considering upgrading to Windows 10. Please advise if there are problems if I upgrade any hardware after upgrade to Windows 10, e.g. upgrade or downgrade RAM.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to upgrade your Windows 7 operating system Windows 10 machine. I will certainly help you get this fixed number.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  Hope the helps of information. Please write back to us for any further assistance. We will be happy to help you.

• after upgrade to windows installation problems

  I have a Compaq cq60. I had vista windows until recently. Now, I've upgraded to windows 7 ultimate. I would like to know if my phone is compatible with the current version of windows. Another problem which started occurring after that I upgraded is im not being not able to video chat on facebook. video chat icon is simply absent. And im also having trouble installing some stuff (Skype and adobe flash player). Installation stops abruptly in the middle. I have tried different browsers google chrome, mozilla and ie. but it's the same deal. Y at - it a plugin, driver I need to install to be able to video chat? Since the video chat used to work properly when I had vista, im guessing this is a problem related to the upgrade of windows 7 ultimate. currently I don't have a service pack installed. Any help would be appreciated.

  My laptop came with vista. But recently I started developing problems. It would have should go down abruptly. So I contacted a dealer near. When my laptop back t has been upgraded to windows 7. When I asked him about this, his response was that windows vista has been exceeded and windows 7 was a better. I'm not investigating the details. In any case, what are the options I have now? should I downgrade from vista? I tried to download Skype again today, but after downloading it said installation could not be copleted.

  Indeed, you must reinstall Windows Vista that came with your computer. See the following thread on how to:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

• 700 - 230qe envy: after upgrade to Windows 10, I have no sound

  I have no sound after upgrading to Windows 10.  When I try to update driver I get error 0x8007001f Audio device IDT High Definition Audio CODEC.    Also get audio servicd without answering

  @gemini2

  Try this.

  1. Select the CODEC Audio IDT high definition in Device Manager.
  2. Select the driver tab.
  3. Click on update driver... button.
  4. -> Select Browse my computer for driver software.
  5. Select-> Let pick me from a list of drivers for devices on my computer.
  6. Select high definition Audio Device (not IDT High Def... that's important...) and click Next. Displays warning message, but the answer Yes.

  REO

• HP ProBook 450 G0: Problems of HP ProBook G0 450 icons after upgrade to Windows 10

  Hello

  2 days ago that I have upgraded to Windows 10 my HP ProBook 450 G0.

  Then I realized my graphics drivers are not working, I tried to update to the last registered in the section to download the drivers for my model.

  After that, I got BSOD and couldn't even see login screen. I removed the update installed in safe mode.

  If at the moment I use some default driver I guess.

  In the Device Manager on Intel(r) HD Graphics 4000 I something like (manual translation) "Windows has stopped this device because of disorders raported. (Code 43) ».

  I can't use the HDMI & display internal. To use the HDMI, I have to restart my PC. After using HDMI, I can't use internal display. A lot of questions, because this driver...

  I really need this, as I am a teacher and I ', using both internal display & HDMI for presentations...

  All solutions? All the newspapers that I can get to help you help me ?

  Kind regards

  Jakub Krol.

  Hello

  In case anyone is interested, my PC is now fixed

  More information: https://windowsforum.com/threads/graphics-issues-after-upgrade-to-windows-10-system_service_exception-sgfxk64-sys.220205/page-2 .

  Kind regards

  JK.