Always the problem with e-mail after trying to repair it with uninstall

Similar Questions

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• What is the problem with Windows 7 Live Mail?

  What is the problem with Windows 7 using Windows Live Mail?

  When I type my emails using special characters, for example "$- + = % sometimes even Live Mail change my characters to a reverse with a top character."  And it it changes between the time wherever I sends it and receives the other person, so I never really know if they receive a message scrambled or not.  I never had this problem with Outlook Express.  What can we do about it.  I use this for business and it is absolutely unacceptible.

  Hello

  This forum deals with aspects of electronic mail on your computer network.

  If the problem related to the Live mail Server, or configure the features of the software, you'll do better by logging and displaying the question on Live Mail support forum.

  My moderator tools cannot transfer messages on the forums of Windows,

  Please re - ask your question on the Forum Windows Live,

  Windows Live Mail Forum
   
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• What is the problem with kernel_task?

  Hello everyone,

  What is the problem with kernel_task?

  I explan: Macbook Pro early 2011 LION OS up to date.

  I bought 8 GB on China supplier, CRUCIAL...

  Well, I got a lot of kernel Panic. Usually, he is involved material, taken on my RAM, back is the original, so still have in the kernel_task to 300% CPU monitoring followed up to 500%...

  Well, I went back to a clean install, a manufacturing one, with nothing.

  Wish I 'd' diagnosis of the equipment, never went on, test it on safe mode, disable all extensions, then nothing:

  Sometimes the kernel_task crazy sometimes not...

  Good read a lot on the internet but nothing has worked... I went to the Apple store in DIJON, they do not have diag any hardware problem, and all my App are approved Apple.

  Used to play the eve online thought, therefore, the graphic chipset pourrait was damaged, so when it's too 'hot' the mac gets crazy... but I expected crazy restarts and that sort of thing.

  I bought a manual, there is no french support to the opening of Apple, but found nothing about my question.

  So what?

  I bought something conivient on Support and friability so today he's dead?

  What should do?

  If you still get the panic of the core, thanks to post separate 2 or 3 of the most recent as answers on this.

  Reports of kernel panic: "/ Library/Logs/DiagnosticReports".

  http://support.Apple.com/kb/ht2546>

  http://support.Apple.com/en-us/HT200553>

  The panic report should have "panic" in the name of the file.

  Kernel panics tend to come from 2 sources

  • Material:
    • 3rd party RAM is the most common.  Replace or return the original is usually the solution.  Crucial and MacSales.com were 2 of the most reliable sellers for the initial quality and guest without question of replacement.
    • Broken USB cables or USB devices have turned up as the 2nd most likely material number.  Usually remove all USB devices, or replace the keyboard and USB mouse to see if it's one of those existing.
    • There are a few Macs with graphics chips that have failed.  I don't know that they exist, but do not know what model Mac had these chips.
  • Software
    • antivirus protection.  It is the number 1 most panicked related software cause.  More OS X does not need antivirus, because it has its own built-in protections http://www.thesafemac.com/mmg-builtin/>.
    • Other core 3rd party extensions are a distant 2nd.
    • NOTE: not all 3rd party kernel extensions are causing problems, but when there is a kernel panic, it's the first thing to look at.

  If run kernel_task is often caused by core 3rd party extensions.  It can be caused by an application program, but then the Applications-> Utilities-> Activity Monitor show "As" an application that consumes a lot of CPU, disk IO and network IO in collaboration with the kernel_task using lots of CPU.  If there is no application burns the CPU at the same time, so it is almost always a 3rd special part of the kernel that was originally the use excessive CPU kernel_task.

  Start in safe mode is usually a test to see if 3rd party extensions are part of the case.  But in safe mode is not how you run your system, because it also loads less advanced graphics drivers and other components.  Safe mode is very conservative, but it's a great way to see if the 3rd party software is at fault and have started when 3rd party software panic the system at boot.

  The contributors to the forum long strongly warn against getting 3rd party anti-virus, cleaners Mac and additions increasing.  This class of 3rd party additions have shown time and time again to really harm performance, remove things they shouldn't and cause a kernel panic.  Especially right after an OS X update to a new version.

• The problem with Windows update - automatic updates service won't start not (error 126)

  original title: the problem with Windows update

  Please help me to get Windows Update operational return.

  XP Media Center Edition, Version 2002, SP3

  Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:
  http://support.Microsoft.com/kb/931852

  Seems to have cleared the error message.  So far so good.

  However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

  I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module could not be found

  I already followed several instructions on this subject:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-access-Windows-automatic-update-after/aeaec175-01f4-47ed-8F97-55b854af4220

  In the thread above, I was following the post on 30 August.  According to Option A, I completed step 5 for the uninstallation of McAfee Security.  At this time, my network card has stopped working.  On the recommendation of the officer, I posted to the Malwarebytes forum.  The officer determined Malwarebytes that I don't have a malicious software.  I ended up posting on forum McAfee to get my network card works again.  Then I reinstalled McAfee and start to run Windows Update.

  I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737.  The difficulty it has worked very well.

  Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058.  When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv.  The message asks me to verify that the user has privileges to take this step.  Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges.  Help me please run this difficulty or recommend another way to get Windows Update works again.

  [1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.

  [2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?

  [3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?

  [4A]... is there a possibility that some of [my data are] infected?

  [4] preventing me from simply infect the whole PC again?

  A1. Yes, and it was my recommendation in August, too.

  A2. Yes.

  A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.

  A4a. Yes, a real possibility.

  A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).

  If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.

  If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Once again, good luck!

• Having the problem with the function on SG300 Dhcp / 500?

  Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.

  My problem is when I create

  VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250

  VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool

  case 1

  I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.

  case 1

  I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.

  but when I have access to the switch and remove the link after that that i will get correct IP.

  I think this is the bug of this firmware. Could you help this case.

  This is a known bug that is the setting of Cisco

  Sent by Cisco Support technique iPad App

• What is the problem with this URL

  Can someone tell me what is the problem with this url

  owa_util.redirect_url(apex_util.prepare_url('f?p='||:APP_ID||':25:'||:APP_SESSION||'::'||:DEBUG||':25,28'||':P25_JOBID,P25_PG:&P3_JOBID.,3, null,||:APP_SESSION'));

  It gives me a value for P25_PG, that is to say 3 but always sets P25_JOBID to 0
  
  Gus

  Hello Gus,

  It looks like point P3_JOBID has no value for the rendering of the page.
  If the value is set subsequently, you can try the following change

  owa_util.redirect_url(apex_util.prepare_url('f?p='||:APP_ID||':25:'||:APP_SESSION||'::'||:DEBUG||':25,28'||':P25_JOBID,P25_PG:'||:P3_JOBID||',3, null,||:APP_SESSION'));
  

  But the part at the end

  ||',3, null,||:APP_SESSION'
  

  Wil do nothing because you give only 2 items in the list separated by commas of the page elements you want to submit. Everything after the second comma in the comma separated value list is of no use for the url of the apex.

  As additional info, the URL of the Apex is built like this:
  >
  1 - application ID or alias
  2 - page ID or Alias
  3 - session & SESSION. : APP_SESSION
  4. application (for example, PRINT_REPORT = REPORT_1) & ASK. : REQUEST
  5 - debug (YES or NO) & DEBUG. : DEBUG
  6 - cache framework

  APP - clear the cache for the entire application
  SESSION - clear the current user session cache
  PR - Reset pagination
  x - clear the page cache x
  -empty the cache for the element y

  7 - separated by a comma list of items on the page
  8 - the list of values separated by commas
  9 - mode printer friendly (YES or blank)

  f? p = & APP_ID.: 1010: & APP_SESSION. : & DEBUG. : RP, 1010:P1010_ITEM1, P1010_ITEM2, P1010_ITEM3:A, B, C
  >

  Kind regards
  Kees Vlek
  -----
  Company: http://www.orcado.nl
  Blog: http://www.orcado.nl/blog/blogger/listings/69-kvlek
  Twitter: http://www.twitter.com/skier66
  If the answer to question please change replied and mark the appropriate post as correct / helpful.

• What is the problem with my iMac mid-2011

  Hello

  Need help find out what is the problem with my iMac to mid-2011.

  Yesterday during a reboot it just never came to life.

  On turning the power on, I get the RINGTONE to start and that's it. The screen is totally black. Nothing behind tried with a torch.

  VRAM rearmament so far I tried repeatedly, unplug and plug, all kinds of combinations of keys in the carillon and nothing.

  Connected to an external monitor and shows nothing of too - no signal.

  Any way that I can know what is wrong with it before sending it to the service tech? I suspect bad graphics card but how do you ensure?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• the problem with the wi - fi does not work on windows 8.1

  Hello dear forum users (sorry for the English, use a translator)

  I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

  Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

  What could be the cause and how to fix it? Thank you!

  It seems that your WIFI adapter is not supported by Windows 8.1

  There are a few options available.

  The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

  The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

  Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

  The Qualcomm Atheros AR9485

  The Intel Centrino Advanced - N 6230 WLAN module

• What is the problem with my files, they don't move, copy or delete? #@?!!

  ..... It is not as easy as you think, either! I am not a novice, but I can't understand how to solve this problem! If I try to move the copy or rename them, Windows XP said 'Impossible. Access denied. Even the disk is not full or write protected and the file is not in use."  Well NO, the hard disk is NOT write protected and far from complete.  No other files in "My Documents", or if otherwise, give me problems. In addition, the files themselves are not protected in writing! They don't have ANY special attributes (IE. 'Read only' and 'Hidden' are NOT defined). Needless to say, I did not define all attributes on them myself, they are not in a shared folder, and I am the administrator of my own computer. When I restarted the computer the next day, it changes nothing! The problem with these particular files remained!

  I was able to move, rename, or delete only with UNLOCKER. But it's not my problem. My problem is when I try to burn any program I use, burns keep in check the end and I keep losing DVD - R, one after the other! I understood the reason for the failures of engraving is because of this problem of reading / writing weird with the files!  WINDOWS XP created this write protect it somehow, because he wasn't on the original files! However, this limited access status is invisible! There is no set special attributes on these files!

  They are just media files, I downloaded, as well as text files (FIVE files different, slightly different formats, ALL from different sources!). They have been downloaded to FIVE different subfolders created in 'My Documents'. And it's not just the affected media files. It's all the files that are in the same folders (ie. txt, jpg) (even if I can at least open the jpg, while I can't read multimedia files).  I've never had this problem with any other similar files downloaded in the same folder. These files are NOT protected by copyright, OR infected by viruses, AND I do not have the virus on my system. (I stopped Kaspersky, my virus program, but it made no difference. "So there was no lock file). Yet, I can play is no longer the files (so that I could before the etc..). VLC says "cannot open the file", WMP says similar. I created a new folder in My Documents, moved to the new folder with UNLOCKER, it made no difference! Same problem! Even using UNLOCKER to transfer them to the desktop, not in any folder in itself does not change a thing! Here is another beauty: software "UnlockIT" says "the file is not locked by any conducted! I have to be to imagine...

  ... This whole thing really made me realize how Microsoft Windows helps my carpal syndrome problem...

  Hey PieterVO,

  I've seen this in a few other threads before. Although I don't have a FixIt for you, I have a few discussions to look over.
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/8e9eee80-C171-4D94-b91e-6797e1f96e49
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/d14731ec-4f0e-4ef8-9aac-028dd7104e0e
  I would like you to try to take possession of the individual files that you work with and try again. I didn't see the error codes listed above, so if you get the error codes, please report it to their.
  See Kieron June 9 Post and post Stickywulf November 14 in the second thread I listed above.
  Give those a try and let us know the results. I hope this helps. Thank you!

• The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  I use sync DIP at the end of migration of data from OID for target OUD. Everything seems great so far, I have found that pwdhistory being migrated is not being validated by OUD password policy

  I do import ldif for OUD and find this pwdhistory field is populated with the same OID value. When I reset password in OUD-DOHAD with the word in the history of password,.

  Expected Behavior: Error Message from the OUD "" LDAP: error code 20 - already the value of specified password exists in the user input " "

  Course Behavior: OUD is what allows to reset the password in the password history

  Also found that when I try again with the same password, then it throws the error 20 code. OUD replaces the old values in pwdhistory after the password resets and written new values with stamp of password.

  It is a Blocker for us for migration in the history of password, I would like to join the forum and check if someone had the same problem and how they managed it?

  Thank you

  Satya

  Support of Oracle confirmed that DIO history for the OUD password migration is not supported. The OID and OUD records and validates the pwdhistory differently

• What is the problem with my Oracle reports parameter?

  Hello

  We use a PL SQL package that allows the user to select the report you want Oracle and associated parameters.   While the control is passed to Oracle 11 g reports.

  The requirement of one of the reports is to enable more detailed codes be selected by the user and then shown.  The detailed code is an alphanumeric field that can hold between 4 and 6 characters.

  If my data model looks like this

  SELECT student_id

      FROM my_view

     WHERE detail_code IN :p_detail_code;

  and the parameter that I'm passing to Oracle reports looks like this (when I view the source HTML code)

  & p_detail_code =('1001','1002')

  so no record is selected.

  However, if my data model looks like this, I get the records you want:

  SELECT student_id

    FROM my_view

  WHERE detail_code IN ('1001', '1002');

  We have Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.

  Please tell me what is the problem with my setting.  Thanks a lot for your help.

  This isn't how you can use in. See this example on how to solve it with the digital settings. If your setting is a character, you need to change this.

  In fact, when you simply enter 1,2,3 as an input parameter, you actually create this query:

  Select *.

  from my_table

  where num_column in ("1,2,3")

  Use rather a lexical parameter:

  Select *.

  from my_table

  & p_where

  In the parameter after relaxation shape, build the lexical like this:

  :p_where := 'where num_column in ('||:p_param||')';
  

• What is the problem with Creative Cloud connection update

  What is the problem with Creative Cloud connection update?  I tried 25 times to update, but it does not work? Can you please help?

  Double-click on the creative process of cloud.  which opens another window that contains a button exit.

  or, click the process (to select) > click on view > click process to quit.  This method brings up a window that contains the two resignation and force them to leave (in the case of quit smoking does not work).

• What is the problem with my trigger :(

  Hi friends
  
  What is the problem with this trigger please
  

  SQL> select object_type from user_objects where object_name='CE_STMT_INT_TMP';
  
  OBJECT_TYPE
  -------------------
  TABLE
  
  SQL> create or replace trigger ce_stmt_int_tmp_trg1
    2  after insert on ce_stmt_int_tmp
    3  for each row
    4  begin
    5      :new.column7 := 'checkno_test';
    6  end;
    7  /
  create or replace trigger ce_stmt_int_tmp_trg1
                            *
  ERROR at line 1:
  ORA-04084: cannot change NEW values for this trigger type

  Thank you very much

  I guess you mean that SQL * Loader is insertion of the value of the column, not not to date. You can override the value SQL * Loader is the insertion in a level line BEFORE INSERT trigger.

  Justin