Am I allowed to sell sample promotional/not for resale of Microsoft Flight Simulator program?

Similar Questions

• I bought windows 8 (blue cover) no license and the disk key is writtin NOT for RESALE. It comes

  I bought windows 8 (blue cover) on eBay at the price of 50 euros, and when I tried to install it, I discovered it's a backup disk and it comes without a license key.

  Also on the center of the disc is written (NOT for RESALE).

  The question is the seller have the right to sell an only not for resale Microsoft product?

  Thank you

  I bought windows 8 (blue cover) on eBay at the price of 50 euros, and when I tried to install it, I discovered it's a backup disk and it comes without a license key.

  Also on the center of the disc is written (NOT for RESALE).

  The question is the seller have the right to sell an only not for resale Microsoft product?

  Thank you

  No, it doesn't have the right to sell you software NFR and if he hid this information, then its wrong.

  Your best decision is to try to get the refund by the dealer, then report him. If it doesn't, don't threaten them. Simply report them to ebay and report to Microsoft Piracy.

  Make sure that you have received as proof of purchase.

  Replica, counterfeit and unauthorized copies policy objects

  Statement of Microsoft piracy:

  Protect yourself against piracy

• Failed to install Microsoft Flight Simulator. Will not pass the installation wizard.

  Failed to install Microsoft Flight Simulator, Version Deluxe 2010. I am running Windows 7 Ult 64 bit. The program will not install, it's an error that it cannot find the file. I tried everything, but it does not install. This is the full version of three discs.

  Following up on this question. I have install and it will go through the wizard of the insulation. Then, it will come with a large screen. He stays there and then says after 15 minutes. «Unable to launch vcredist_ * 86.exe.» I press ok and a error number "the system cannot find the path specified in 3. Press ok and then it states that the system has not changed except for... »

  I am convinced that Flight simulator is not intended to be run on a 64-bit computer that is very disappointing. I have a program which should install without all the aggravation I had to endure. If you run them 64-bit machines do not buy this product. I tried since it first came out. I feel at the moment where I get it going it will be a version dated date out. Wait until there is a version dedicated 64-bit, you will save yourself a lot of grief. I have an Asus dual core Centrino 2, 2.6 GB h. computer laptop with 4 GB memory. I install my DVD direct program. It worked when the computer is a 32-bit computer.

  Clive Ballantyne

  What finally worked for me when I tried to install MSFSX Gold Edition has been that I copied the disc 1 FS to my office.  Then I copied the contents of the FS 2 disc and put the files in the same folder.  When're asked you if you want to replace the files with the same name on both drives say no.  It seemed to work well for me when nothing else did.

  I haven't read of anyone doing this exactly, it's my own invention/workaround bit AFAIK. Hope this works for all of you who cannot make it work otherwise.

  System:
  ASUS G50v-t
  Intel Core 2 Duo Centrino 2, 2.26 GHz
  NVIDIA GeForce 9800 m GS 512 MB
  4 GB of Ram
  Windows 7 Professional 64 bit

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• Logitech gamepad does not work when you play Flight Simulator 2004.

  When you run FS 2004 use logitech extreme 3d pro joystick Z axis will result in the plan or the Swing window beyond the movement of z. then again

  accrose the screen. It apears as a swing. no adjustment of the sensitivity or the value null will be wet this condition.  Please notify

  Original title: logitech Z erratic joystick axis, it would be possible to correct?

  Hi melvin sorensen,.

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Logitech extreme 3d pro joystick doesn't work don't properly during playback in Flight Simulator 2004. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer the question-

  What is the version of Windows installed on the computer?

  I would like more information about the issue.

  Method-

  I would like you to contact Microsoft Flight Simulator for assistance.

  Check out the link-

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  You can also post your request in the forums of community of Flight Simulator.

  Check out the link-

  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx

  We know if ACE of other Windows issues. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Uprading a 'is not-for-resale' FB 4.5 FB 4.5 for PHP license, possible?

  Sorry to cross post, got no response in the "Installation and activation" forum, then post here.

  I have one 'is not-for-resale' FB 4.5 license. Can I upgrade this FB 4.5 for PHP? If I buy a regular FB 4.5 upgrade to FB 4.5 for PHP since Adobe store it will work?

  Thank you.

  The license is not intended for resale are for non-commercial use and may not be used to upgrade/Upselling.

  Thank you

  Sudhir

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.

• Microsoft Flight Simulator does not work

  My husband is having a problem with his flight simulator.  After that, it installs the software, it is able to play.  However, after this first piece, once he leaves the program and try to open it again, it will not load.  The programs displayed on the hard disk but does not work.  It uninstalled and re installed the program, with the same result.  After the initial piece after installation, it is not able to play again.

  Hello

  Here is a link that should prove beneficial to get a resolution to your inquiry.  I hope that this information is beneficial.

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/24974b97-BCEE-46EA-8f52-f7ad0881125a

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Microsoft Flight Simulator Gold Edition product key does not work.

  just bought microsoft flight sim gold Edition. I have flight sim X on my computer with acceleration. I uninstalled acceleration then transferred gold.everything was going well until I tried to inter the product key. I tried flight sim X pro, did not work. I then tried XP X Flight Simulator that has not worked.

  When I bought the Edition first however I did an installation and noticed that had not changed in aircraft or mission that is what brings me to uninstall and then try what I describe above. Now it seems that nothing works

  Thanks for the reply! It seems that the problem is that I tried to install the Excceleration provided with the Microsoft Flight Sim Gold Edition on top of the current edition. I called Microsoft customer service and gave access to a technician in India.  She went through my computer and worked on all issues.  Not to change the subject, but I was surpised at how all this worked compared to 20, more years ago, when I would call the customer support.  At the time could dial the number and a tech would answer the phone and will guide you through it.  Now we have forums, groups and telephone answering services that you must pass to speak to a technician. It was when Windows is first out with Gui and Win 3.1.  Thanks to Microsoft and after all these years, there are still the best, and their customer support is excellent.

  Dave Wagner

  E-mail address is removed from the privacy *.

• message from BIOS X120e diagnosis "for evaluation only. not for resale. "

  This is just a minor quibble, but when I turn on the messages of 'Diagnostic' in the BIOS, I get the following screen:

  http://imgf.tw/717745842.jpg

  I guess the message 'FOR ASSESSMENT ONLY. NOT FOR THE RESALE"is not supposed to be there; at least this is the case for some previous Thinkpad BIOSes (http://www-307.ibm.com/pc/support/site.wss/MIGR-59180.html).

  Or do I have some special super x120e?

  EDIT: My model code is 0596-CTO.

  It might be fun to try, but no matrix - it has been fixed in the updated BIOS/UEFI:

  http://imgf.tw/232673443.jpg

  Now, the CPU is actually identified!

• Previews - allows you to use or not for the final export

  First of all, I read through the success of forum type "Use Previews" and clicking on ask now.

  I read an article written by Todd Kopriva who said: it is not recommended to use previews for final export declaring may result in low-quality final output

  I read this thread, that says the same thing: "for help to" use found "button is recommended?" "over"

  I'm a bit confused.

  I treated video and RGB curves applied to the AVCHD video effects - and it shows a red bar on the time line. I obviously can't read in real time.

  So what I chose is

  -Rendered effects in the work area, on all the clips, do not change the settings of the sequence, that is to say with the help of full resolution etc.

  -export the timeline with the control to use Previews

  Since my previews are rendered with the same resolution as the source, their use in exports, should cause no loss of resolution, according to my understanding. Is this correct?

  I apply these effects to 3 angles of camera extends over 3 hours (sorry, I know) and I wanted to do a final output of the multicam sequence.

  So I thought about these 2 approaches:

  approach 1:

  -adjust the effects on the clips to my satisfaction

  -disable them on timeline of source (leading to the Green/no rendering bar that will allow me to read RT without problem)

  -create the sequence of them multicam

  -go to each element in the sequence multicam and re - activate the effects and then the kickoff of the exportation on the multicam sequence

  approach 2:

  -adjust the effects on the clips to my satisfaction on each clip and get to the help of resolution and the enlarged image (to allow RT playback in sequence multicam)

  -create the sequence the clips multicam

  -then the kickoff of the exportation on the multicam sequence

  With these two approaches, I ran into issues with CS6, that once I closed the project and re-opened, agency link lost for rendering files - as well as timelines returned to red and there is no way I can re - link preview files.

  (I posted this on the forum here)

  so, I came with the approach 3:

  -adjust the effects on the clips to my satisfaction on each clip and get to the help of resolution and the enlarged image (to allow RT playback in sequence multicam)

  -export each clip using the settings of the source.

  -reimport final clips on the new sequence, then create a multicam them sequence

  -then the kickoff of the exportation on the multicam sequence

  When I play the preview files, obviously I don't see any loss of quality, even in fullscreen, given that I made without changing the sequence settings.

  So, my conclusion is that the use of views to export is not recommended IF previews created using either lesser depth resolution or bit as the source.

  Appreciate someone confirming my thoughts all or remedy.

  The only time where the preview files are useful is when you want to perform a quick export (say for review) where quality is not a problem.

• The requested flight file corrupt error flight simulator program could not start or cannot be found.

  When I go to start the flight sim (Fs9) program I get this error Message requested flight file corrupted or cannot be found.

  OT: File corrupted

  Hello

  I suggest you try the steps from the following link:

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  Note: Make sure that you reset the computer in normal mode once you perform the clean boot.

  If the problem persists, then I suggest you to the post office.
  http://www.Microsoft.com/games/flightsimulatorx/
  http://www.Microsoft.com/products/games/FSInsider/community/pages/default.aspx
  http://support.Microsoft.com/GP/games-for-Windows

• Can a not for resale version of Windows be transferred to a new PC?

  I am currently using an NFR of Windows 8 Pro version and would like to know if I can use it on the PC I am building?

  Yes, as long as their is no longer in use elsewhere. You may need to reactivate over the telephone. If it's an NFR version upgrade, you will need to transfer it to a computer that is running a release candidate of Windows (XP, Vista or Windows 7).

  Reactivation by phone will be necessary:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Flight simulator expansion pack will not load on windows 7

  Responsible for Flight Sim X Gold Edition and works very well but the accelerator pack will not charge. It is said that he needs a Flight Sim X to load. Flight Sim X IS loaded, but apparently the accelerator pack is unable to find it.

  Hello

  To resolve this problem, you can try renaming the file Logbook.bin. To do this, follow these steps:

  1. click on Start.

  2. click on My Documents or Documents.

  3. double-click on the file folder of Microsoft Flight Simulator X to open it.

  4. right click on the Logbook.bin file and then click Rename.

  5. rename the Logbook.OLD and then press ENTER.

  6 start Flight Simulator X to create a new log file.

  Hope this information is useful.