Please help me with my blue screen of death

Similar Questions

• Please help me with this blue screen error... He produced almost every time that I do something on the Internet (IRQL_NOT_LESS_OR_EQUAL)?

  This blue screen to me before had taken place. I have read many forums and got to know upgrade drivers Ethernet and when I looked inside, the engines were updated 2012.I their and thought has been fixed and now its new annoys me when I am back on internet especially download with bit torrent or almost... If you please examine it. I use Windows 7.
  The details of everything that was running is here in this txt file in Sky Drive:

  https://SkyDrive.live.com/?CID=fef1a77b65bcf083&ID=FEF1A77B65BCF083! 107 & authkey =! AAMS14vozxJ_cJc

  TX

  These were not conclusive.  Run the Driver Verifier to identify the real cause.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  Driver Verifier (for full instructions, see our wiki here)

  Co-written by JMH3143

  .

• need help with the blue screen of death!

  Hey, I recently got two usus strix 980ti and since then iv been doing the blue screen of death when I try to restart my pc and turn off it crashed randomly one or two times as well.

  blue screen:

  Check with your hardware vendor for updates to the bios. Disable the bios memory options such as implementing caching or shading. If you need to use safe mode to remove...

  technical information.

  Stop: 0x0000007e (0xffffffffc0000005, 0xfffff8800554368c, 0xfffff88003938158, 0xfffff880039379b0)

  isub3xhc.sys - address fffff8800554368c base at fffff880054f5000, datastamp 560555f0

  then he dumps memory and reboots.

  any help would be full use thank you.

  Hello

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for the BIOS and driver
  updates.)

  This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
  for the drivers Microsoft hide - updated those without drain in their names. (Also updated
  the BIOS and chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on
  your system. For each driver in the list, additional useful information is displayed:
  load address of the driver, description, version, name of the product, the company that
  created the pilot and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit system Maker as replacements and manufacturer device which are the
  most up-to-date. Control Panel - Device Manager - Display Adapter - write it down
  and complete the model of your video - double click - tab of the driver card-
  Note the version information. Now click on UPdate Driver (this can do nothing
  that MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it
  will update the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so to install a driver - restart
  -check that it is installed and try again if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible
  even for the Poles that seem identical) and when the faster memory is placed
  in the system behind the slower memory. So it is best to also swap sticks in and out
  to check for those even if all the tests of memory are not a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top Memory Diagnostics tool
  -Right click - RUN AS follows ADMIN instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista
  Memory Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Stop: 0x0000007b (0xf78d2525, 0 x 000034, 0x00000000, 0x00000000) with the blue screen of death

  I have a compaq presario v6254ae and you have the blue screen of death. I tried to restart using all different modes, including the recovery console, nothing helps. Unfortunately, I'm not a computer genius, and the need for the very simple instructions on how to get the laptop back running. I used the system recovery discs, but they are not recognized, so now I'm stuck and no idea on how to remedy the situation. Help, please

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
  http://support.Microsoft.com/kb/324103

  Check your SATA mode setting in the BIOS "is not" value AHCI, set it on the SATA/IDE mode.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Problems with the blue screen of death (when my computer is shut down)

  I get a blue screen of death on occasion, when shutting down my computer (Windows XP, Dell Vostro). It started happening after I installed the latest version of the Synology NAS software. This is the message: BCCode: 100000d 1 BCP1: BA3F1F20 BCP2: 00000002 BCP3: 00000008 BCP4: BA3F1F20 OSVer: 5_1_2600 SP: 3_0 product: 256_1. Additional technical information: C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\Mini021112-01.dmp and C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\sysdata.xml.

  Not sure if it is related to the installation or if it is another problem. Any advice would be appreciated.

  The minidump file showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referencing the usbccgp.sys (common class generic Parent Driver USB):

  BUCKET_ID: 0xD1_CODE_AV_BAD_IP_usbccgp+ 1f20

  The spoolsv.exe (print spooler service) is the process that crashed.

  You have recently installed a USB printer?

  In any case there may be a problem with the USB stack in Windows XP Service Pack 3 so I recommend you to install the following fix can correct a problem of 'timing' of USB that can be useful for the error you receive:

  http://support.Microsoft.com/kb/969238

  There is a link at the top of the article to request the hotfix.

  There was a driver of Synology (busenum.sys) loaded during the crash, but it does not appear to be involved in the accident.

• Help me with this blue screen!

  My computer has been infected with control of HARD disk about 12 hours ago, and I tried to remove it with Malwarebytes, but when he scanning, virus above toke and shuts down my computer. When I tried to restart, a blue screen appears indicating

  A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:

  STOP: 0X0000007B (0XB84E3524, 0 X 0000034, 0X00000000, 0X00000000)

  Please help me! I need to go beyond that to remove this virus. I tried to go through safe mode and all the options available when I restart my computer.  If you know a way you could help me please to share information.

  Hello

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue Screen Of Death with Windows Vista

  I am running Windows Vista and after trying to update a NVIDIA Geforce driver, my computer will not start at the top and comes up with the "blue screen of death/Disconnections. Initially it started, but icons were very large and I could finally get the right size. Thought that there was a problem with the driver compatibililty and deleted driver (I think), not knowing that I would not be able to find the original driver. Restarted and it is when I got the dreaded "BSOD" and knew with my computer knowledge, I was in trouble. Tried to reboot and then restart with the Windows disk, with the same results. Past to start in safe mode, normal mode, etc... and does not boot in any mode, when eneter is pushed (of your choice) Unit acts as if it starts successfully, with the small bar down Center of screen scrolling as it should, but then the BOSD rises. Support, not much luck, worked with NVIDIA replaced card video, restarted, same result. Need help please.

  Hello

  Here's a problem similar to yours that I help a CO-OP with.

  See if it helps you too.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/unable-to-successfully-boot-syste-after-trying-to/14523396-5c88-4460-A29E-87d03fa00074

  See you soon.

• I got the Blue Screen Of Death with Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Original title: Help, I got the blue screen of death!

  Can someone help me please? Whenever I turn on my computer, it goes to the BSOD. I tried the last settings that worked, but he went to the BSOD too! In addition, safe mode it won't work goes to the BSOD as well. Nothing works. I have to go to a computer store to fix it, or is - it possible to fix it at home? Please help immediately!

  The BSOD I get says:

  A problem has been detected and windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: disable or uninstall all utility defragmentation or anti-virus disk backup,. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /f to check for hard drive corruption, and then restart your computer. Stop: 0 x 00000024 (5898 0x86D4, 0xC0000102, 0 x 00190203, 0 x 00000000)

  Hi TheCookeNinja,

  I suggest you run the check disk (chkdsk) of the Recovery Console & check if you are able to boot to the desktop correctly.

  Step 1: To start the Recovery Console, you can follow this link.

   

  To start the computer and use the Recovery Console

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_overview.mspx?mfr=true

  Step 2: At the Recovery Console prompt, type the following command and then press ENTER:

  CHKDSK [/ p]: [/ r]

  Note: At first, try to run chkdsk/p & check if it helps. Later, you can run chkdsk/r.

  Reference:

   

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I hope this helps.

• Satellite A65-S126 - blue screen of death UNMOUNTABLE BOOT VOLUME

  Hello

  I have starting problems in windows. He is stuck in a cycle without end start. Pressing F8 helped me freezing the blue screen of death, he said: "a problem has been detected and windows has been shotdown to avoid damaging your computer. UNMOUNTABLE BOOT VOLUME. "The end

  Technical information:
  Stop: 0x000000ED (0x89B789E0, 0x00000000, 0xC000009C, 0x00000000)

  I bought my laptop with the OS XP Home Edition already installed.

  Thank you and I hope you could help me solve this issue.

  Saul

  Post edited by: saviar01

  You can enter OS in safe mode?

• Windows does not detect the external monitor after Blue Screen of Death

  Hi guys,.

  I currently have a problem with my second monitor, I installed the monitor (Acer G276HLA), it worked perfectly for about a month. Today, when I was working with SolidWorks, blue screen of death appeared 2 times and I have to restart my laptop. After the reboot, Windows does not detect my second monitor more, I tried my best but no luck, please me have this problems.

  I use an HDMI cable to connect the laptop and the screen...

  Best regards

  Hyouka

  Personal laptop is limited to the installation of other equipment, graphic monitor (s) push resources. If ram memory

  is maximally, & the BIOS settings are set to a different monitor, Direct X updates, graphics software are updated, then

  We should be able to run a reg monitor... Chk, go in run or cmd, type: DXDIAG run Direct X.

  Also, the BIOS settings are critical, uninstall the default, add new ones.

• Blue screen of death, the Satellite M100

  Hello

  I have Satellite M100, we had problems with the blue screen of death sometimes and then it seemed fairly constant and the only way to ensure that the system is not plant was to start it in safe mode.

  The noise had also stopped working. Decided to restore the factory settings system used the disk and everything goes well until the system started in windows allows you to go through the installation program then blue screen again. The sound seems to have returned, although it is slightly crispy.
  So don't know if this is the problem or not. Unrecoverable system error crashes and also driver_irql_not_less_or_equal.

  Now cannot start in safe mode as the windows installation did not finish...

  Any ideas anyone?

  See you soon
  Simon

  Hello Simon

  If BSOD is displayed after the installation of recovery, it may be a serious physical issue.
  Try installing the OS using the recovery discs. If the problem persists I think it's time to contact the nearest Toshiba service provider.

• Satellite M40-236 Blue Screen of Death

  A few days ago, I bought a Toshiba Satellite M40-236. I hated the pre-installed Windows XP Home Edition and installed Windows XP Pro with SP2 integrated. Subsequently, I installed all the drivers provided and recommended by Toshiba of: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU&teddProduct=5 38 & cmsFamily = Satellite & cmsSerie = Satellite + M40 + Seri are & cmsCategory = Notebooks & mode = allMachines & action = s earch

  Video update of Bios, drivers and so on. Everything was well worked, installed all updates from the Microsoft update site and then tried to install Windows Media Player from the microsoft site. Then, when tried to open music file in media player him wound up Windows down with the blue screen of death. After the reboot, the blue screen remained. Tried to load in Safe Mode, last good known... no result... still blue screen.

  Tried to reinstall Win XP it Recovery DVD - Rom, the same result... after that the files are copied to the HARD disk and the system is restarted, Win XP Logo current with progress bar and suddenly Blue Screen of Death :(((

  Tried to do to reinstall a different version of Windows (2000, XP Home, Xp Pro, 98SE)-no result after that it says from Microsoft Windows (during installation), the blue screen of death and nothing more... STOP: 0x0000007E or STOP: 0x0000007F.

  Maybe someone has the same? Can be any solution to this problem? I think because of the laptop is a new... maybe there's sth with RAM?

  Hello clotidle

  Well, it very difficult to tell what the problem is.
  I don t think that the BIOS is wrong because as a wrong
  The BIOS update procedure has damage to the motherboard and it is not possible to run or start anything.

  Sorry I n t have a proper answer.
  In my opinion, you should contact Toshiba service partner because I don t think that you will solve this problem yourself.

  PS: You can downgrade the BIOS t.
  Only the AEP has a possibility to do so.

  Good bye

• Constant blue screen of death without answers

  I had a constant problem several times a day with a blue screen of death, and Microsoft has no answers.

  I bought the last Windows 7 Ultimate edition teacher and yet when I try to enter the code it tells me it has 'expired' which makes no sense at all. If I'm relegated to this forum or pay $49 an hour to find out why Windows 7 sucks worse than any other edition I've ever known.

  I checked everything (I built the machine myself, so I'm not stupid on computers) and made sure that all drivers, bios and everything is up-to-date. There is NO hardware conflicts.

  The problem seems worse if I discover videos or use Windows media player, but even if I did not, I had no warning and suddenly, "BAM!" I get the countdown to 100 and it is stuck on the blue screen with a note saying "contact your administrator for more information.

  When I check the error log it says that the error is in Windows 7 in an "unknown problem".

  No data is ever passed to Windows for some reason any (which is really pissing me off because all other versions of Windows ALWAYS sent to the data to Microsoft before) except from time to time, but there is never a reference where the problem relates to.

  I spent a lot of money on this motherboard 790 - FX-GD70 MSI and a 6 core AMD processor. I have 16 GB of memory and it should be a State-of-the-art computer and it acts like a Windows 95 machine.

  Any suggestions?

  I was not able to say anything on their part and I had MSI look on them and they say they are "inconclusive" as to what the problem is.

  Errors are varied and seem to point to a hardware problem.

  Can you do the following? :

  Start > type eventvwr in the box "search programs and files", then press 'Enter' > expand "Custom views" and right click then "administrative events' > select ' save all events in a custom view as" and save it as a .evtx file

  Then do the .evtx file available via Windows Live SkyDrive.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• More recent Microsoft Update caused 'blue screen of death '. screenshots included, HELP Please!

  Hi, I am running Vista on an Acer Aspire M3641 and I had no problem since buying it there, until the other day, it's about 8 months.
  2/3 days ago I updated my computer with the latest Microsoft Update before closing down, went to my friends house, came back, the machine and my computer crashed at turn on. The blue screen of death appears literally for a second or 2:
  http://img69.imageshack.us/img69/6483/100220101146.jpg
  Then, a message called error recovery Windows appears, he gives me the possibility of either start Windows normally (which comes to restart the computer) or launch a startup repair.
  Upon the choice of startup, waiting a few minutes ago the repair, then the messege "Startup Repair cannot repair this computer automatically" and he asked then whether or not he wants me to send information about the problem or not that he won't let me not do anyway, but it allows me to open a window called the details of the problem :
  http://img28.imageshack.us/img28/4053/120220101171.jpg
  AND:
  http://img230.imageshack.us/img230/9734/120220101172.jpg
  After that I have no other choice other than to click on finish, and stop the pc.
  I also tried to tap f8 to start the computer in safe mode, but it is not as
  work, I don't know what to do, if someone could help me that would be greatly appreiciated!
  Thank you in anticipation

  If you are able to get in Mode safe mode with command prompt then try the items listed in this article.  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.