An another registration problem

Similar Questions

• Satellite A50 112: registration problems

  I have a type of satellite SA50-112. When I chose to save my laptop with toshiba this type does not appear in the list. Any ideas?

  Hello

  After a few problems with the registration, I got some info from a Service partner.

  There are toshiba serveral registration Web pages. You have to find of the Toshiba site specific to the country, where your laptop has been purchased. On this site you may register your laptop.

  Another tip: If you take a look at the warranty booklet (it has been delivered by your laptop) there is a full explanation on registration!

  It should help you!

  Bye Bob

• I want to install my Vista in a new machine, will be what will have registration problems?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have

  • I removed my Vista on my computer because of the lack of Vista operating system file cache, I understand that there is now a patch to make it work properly. I want to install on my new machine, my local shop said I you will encounter a problem with the registration because it's another machine. Please can you guide me. Thank you.

  If Windows Vista was preinstalled on your old machine, it is attached to this computer, and you cannot install it on the new machine.

  If you bought Windows Vista software in a store, you can remove from the old machine and install it on the new.  There could be a problem with the activation (which is different then registration).  After installation, start the product activation.  If it will not activate online, use the phone activation option and explain the situation to the person who answers.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Turn on 15 in 1 card reader it was off for another troubleshooting problem

  All trying to solve another problem the 15 in 1 reader was off another problem has been resolved the reader was not been turned back on help

  I saw not a device with an option switch for the card reader, but I didn't know of every unit ever made.

  What is the product number?

  Do you know where it has been disabled?  Coincidentally, it has been disabled in Device Manager?

  The card reader should be listed under the following image-based disk drives.  You can try to uninstall/reinstall the card reader (s) of the device, as Manager indicated to half way down in this document.  The document is for Vista, but the steps are similar for Windows 7.

  

  In Device Manager, a disabled device will have an arrow icon down on it.  If it does not indicate that it is disabled, right click on it and selecting activate should allow it.

• FSX acceleration-registration problem

  I am recording acceleration X of Flight Simulation after having to remove it to get rid of a few gremlins.  When the box is poster-register now or more later I click on register now, but the box that appears to enter my registration key is cut short, cut right and down, I just see the upper part of the code I type but does not click on enter, so can not register. When I had this problem, a couple of years I had fixed by telephone by Microsoft, but they no longer do this. someone please help. Dave.

  Moved from Community Participation

  Edit: in the title 'Register' replaced with 'record '.

  Hello

  Sorry, you have not received a response yet.

  No guarantee, but by pressing the Enter key may be the same only by clicking on the button Enter off the screen.

  Change the resolution of the screen you can see the complete registration form. (Except for XP), right-click on the screen > personalize > display settings > a higher resolution will allow more content to fit the screen.

  Don

• Acer registration problem

  Cannot save a new office purchased through Wal-Mart. Acer does not recognize the ID series, despite several attempts and using the exact number in the AcerID folder. Have tried several times. Other responses on the forum for the registration issue show a Web site that does not work. Broken link... What is the problem with Acer? I've never met who with other manufacturers.

  Help, please. Thanks in advance.

  I had the same problem, so I wrote them a letter with all my details to register for my laptop.

  Send by registered mail.

  I also had it with Virgin also.

  Thumberlina.

• integer to another class problem, please help :D

  I tried a day now to solve this problem and I'm stumped. Could someone please point out what's wrong with the following code? I'm moving an integer of a class to another.

  ButtonField nextBut = new ButtonField ("Next", Field.FIELD_HCENTER) {}
  protected boolean trackwheelClick (int status, int time) {}
  If (firstChoice == 0) {}
  Dialog.Alert ("you must choose!");
  }
  else {}
  int firstChoices = firstChoice;
  UiApplication.getUiApplication () .popScreen (Ui.getUiEngine () .getActiveScreen ());
  UiApplication.getUiApplication () .pushScreen (new newGame3 (firstChoices));
                     
  }
  Returns true;        }
  public int getPreferredWidth() {}
  Return Display.getWidth ();
  }
  Protected Sub paint (Graphics Graphics) {}
  graph.setBackgroundColor (Color.BLUE);
  graph.fillRect (0, 0, getWidth(), getHeight());
  graph.setColor (Color.RED);
  Graph.Clear ();
  Super.Paint (Graph);
  }
  };
         
  nextBut.setFont (Font.getDefault () .derive (Font.BOLD));
         
  FieldChangeListener lnextBut = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  }
  }
  ;
  nextBut.setChangeListener (lnextBut);
  VMAN. Add (nextBut);

  the other class

  public class newGame3 extends form {}
     
  public newGame3 (int firstChoices) {}
  LabelField t1 = new LabelField ("new game 3" + firstChoices);
  Add (T1);
  }
  }

  I think Rexdoug meant firstChoice.

  Give a look at this example. You should get whats wrong on your code.

  public class TestScreen extends MainScreen
  {
      int firstChoice = 5;
      public TestScreen()
      {
          ButtonField nextBut = new ButtonField(" Next ", Field.FIELD_HCENTER | ButtonField.CONSUME_CLICK);
          FieldChangeListener lnextBut = new FieldChangeListener()
          {
              public void fieldChanged(Field field, int context)
              {
                  UiApplication.getUiApplication().popScreen(Ui.getUiEngine().getActiveScreen());
                  UiApplication.getUiApplication().pushScreen(new NewGame3(firstChoice));
              }
          };
          nextBut.setChangeListener(lnextBut);
          this.add(nextBut);
      }
  } 
  
  class NewGame3 extends MainScreen
      {
          public NewGame3(int firstChoice)
          {
              LabelField t1 = new LabelField(" New Game 3 "+ firstChoice);
              this.add(t1);
          }
      }
  

  Concerning

  Bika

• Composition within another composition - problems

  I have a composition within another composition, but for some reason, the elements inside the composition of the 'child' do not appear where they should do the loading of the page. If I move the edge of the Explorer by a single pixel or more... they all go in the right position.

  The site is Ord River Sports and here are the screenshots.

  Anyone know what is happening here... Muse bug or I do something wrong?

  The loading of the page (no icons and nothing is aligned)...

  

  Once I drag the browser a bit (everything works fine?) ...

  

  So, I realized what was causing this problem. It was the SVG icons. I replaced all the SVG with png and it works perfectly.

  Adobe... SVG is causing this issue. Please take note and correct this bug. I also noticed that SVG cause major problems with the widget Menu engine Muse themes.

• Import from another catalog problem

  Hi there anyone able to provide assistance.

  I have 834 images in a catalog that I captured on an assignment and would like to import into my main catalog on my desktop.

  When I select import into another catalogue (launched from my catalog of office), I get the following dialog box. The problem is I can see no sign of these files anywhere on my main catalog either through Lightroom or Explorer and for some reason usually allow me to save all 834 files in this catalog. I even tried to change the file names of all 834 files with the same result.

  I do not want to import these files through the import method, as I have already done editing files and would like to keep these corrections.

  I am a loss as what to do next - anyone with any suggestions?

  Robert

  

  Hi Boley

  • Open the catalog from the old
  • In Lightroom (library Module) go to the library > find all missing Pictures(Menu bar)
  • Also check how many photos does in all of the photographs
  • Check how many of them is missing (a new option will appear photographs of missing persons)

  

  Lack of files in the develop Module, they will have to tick ' ! . Sign

  Concerning

  Assani
  

• CS 6 registration problem

  I bought the Photoshop CS6 upgrade and try to install it on a new computer that doesn't have my previous version CS5 on it.  (It has been installed on a laptop that suffered a catastrophic hard drive failure). The registration process wonder for my CS5 series # s that are not available for me because I bought the records and they are stored across the country. Any ideas on how to proceed?

  Thanks for the help, Jeff.  I contacted customer service and we have worked the problem.  I am running at the moment.

  Sent from my iPad

• Build the option export to another workspace - problem

  Hi all
  
  I have a page with the two regions. Logically, the two regions are mutually exclusive, only must never appear. I have created a compilation called "Simulated Login" option and set the option of compilation of region 1 to "{not simulated Login}" and the option of compilation of region 2 to «Simulated Login» When I run the page and the build option is excluded, I see only region 1. When the build option is included, I see only region 2.
  
  I have a problem when I export my application to a different workspace. Region 2 compilation option is still defined as the original application, but region 1 build option is not set after import - it should be "{not simulated Login}" but instead, it is empty. Now, when I run the page and the build option is excluded, I see only region 1 and when it is included, I see the two regions.
  
  In the meantime, I'll create another obvious option of compilation as a workaround - I'll have to make sure I have keep the two build options defined as opposed to eachother!
  
  Request Express 3.0.1.00.07. Database: 10.1.0.5.0 - Production
  
  Kind regards
  
  Jerry

  Jerry,

  You're absolutely right, good grip. We'll fix it.

  Scott

• Migrate SSDS to an another MBP - problem App Store now

  Hello

  Scenario: first MBP 13 "early 2011, second MBP 13" mid-2012.

  I had a little accident with a glass of orange juice and the 2011 MBP just next door. Say no more, it's a classic. I could get at least the SSD unscathed.

  In any case, I got my hands on basically the same model MBP. It is just over a year the most recent. I like to use the 500 GB SSD with El Capitan and bootcamped Win10 of the MBP 2011 as I just swapped it with the HD to MBP 2012.

  So far so good. Double it starts perfectly and everything seems to work except the App store. I checked everything suggested for the "cannot connect to the App store" problem, but none of them worked, terminal settings, Keychain, time hacks etc etc. I guess it has something to do with the fact that the SSD is still material information of MBP, 2011 somewhere and now that it's running on a different model (very slightly) I'm stuck on the App Store. Of course, I am the legal owner of these two Mbps.

  I would be very grateful for any hint how to get around this, even with a terminal hack. I have no time to reinstall. I need the SSD to stay the main system disk where a moment computer migration is no option.

  See you soon

  Learn the following Apple support details. Mac App Store: frequently asked Questions (FAQ) - Apple Support

  Perhaps, it will provide more information.

  Kim

• Registration problems

  I tried to register my new laptop online. OK, but toward the end of the process, the site says that registration is not complete until I sent a copy of the invoice and the data of the label OR by fax the info to a given telephone number. Well, I did not write this number thinking that I would use their e-mail address. Unfortunately. the automatic response says that the address is not accept e-mails more.

  The Web site is not a phone number to contact them on registration. The email said: "there you will find also a tool for mutual assistance with the option to create a service case, should this be necessary. "Well, I couldn't find this self-help tool.

  Any ideas?

  I found the solution

  ... and how did you solve it?

• Satellite A200 "locked by another application" problem may be solved...

  Well,.

  Although I searched a lot in this forum I failed to find a solution to this problem of webcam.
  In any case, I've tried a few things and I found this:

  My system is A200-1AE (PSAECE) satellite running windows vista 32-bit

  Go to Device Manager.
  Find imaging devices.
  Under imaging devices, there is our webcam.
  Right-click on the webcam, and then select Update driver software.
  In the new window, select "Browse my computer for driver software".
  In the new page, select "Let Me pick from a list of drivers for devices on my computer.
  Click "Show compatible hardware" and you will have 3 options:
  -Chicony USB 2.0 Camera
  -Chicony USB 2.0 Camera
  USB video device-
  Select "USB video device" and click "Next".

  Windows will now begin to install the driver.
  Once installation is complete vista may ask for a reboot.

  I must tell you that, after that I followed these steps, my webcam works perfectly for about 4-5 hours.
  I also restarted my laptop and it continues to go well.

  What is described above worked perfectly for me so far.
  If you want to try that I take no responsibility is something bad happens.
  I'm just telling you what I did.

  But it seems ok now.

  Please give some feedback.
  Thanx.

  Looks interesting, maybe if other users will report on their experience with your solution, we could do some general post about it with solutions around this whole subject. :)

  Welcome them

• Hotmail registration problem

  I connect to hotmail with screen name and a password, but it will never through. Then finally says "Internet Explorer cannot display etc.."

  Hi f f t,

  ·         Since when are you facing this problem?

  ·         Did you recently change?

  You can check if this article helps.

  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

  You can also post your query to Windows Live Solution Center.

  Hotmail - Windows Live Solution Center Portal