Registration problems

Similar Questions

• Satellite A50 112: registration problems

  I have a type of satellite SA50-112. When I chose to save my laptop with toshiba this type does not appear in the list. Any ideas?

  Hello

  After a few problems with the registration, I got some info from a Service partner.

  There are toshiba serveral registration Web pages. You have to find of the Toshiba site specific to the country, where your laptop has been purchased. On this site you may register your laptop.

  Another tip: If you take a look at the warranty booklet (it has been delivered by your laptop) there is a full explanation on registration!

  It should help you!

  Bye Bob

• FSX acceleration-registration problem

  I am recording acceleration X of Flight Simulation after having to remove it to get rid of a few gremlins.  When the box is poster-register now or more later I click on register now, but the box that appears to enter my registration key is cut short, cut right and down, I just see the upper part of the code I type but does not click on enter, so can not register. When I had this problem, a couple of years I had fixed by telephone by Microsoft, but they no longer do this. someone please help. Dave.

  Moved from Community Participation

  Edit: in the title 'Register' replaced with 'record '.

  Hello

  Sorry, you have not received a response yet.

  No guarantee, but by pressing the Enter key may be the same only by clicking on the button Enter off the screen.

  Change the resolution of the screen you can see the complete registration form. (Except for XP), right-click on the screen > personalize > display settings > a higher resolution will allow more content to fit the screen.

  Don

• Acer registration problem

  Cannot save a new office purchased through Wal-Mart. Acer does not recognize the ID series, despite several attempts and using the exact number in the AcerID folder. Have tried several times. Other responses on the forum for the registration issue show a Web site that does not work. Broken link... What is the problem with Acer? I've never met who with other manufacturers.

  Help, please. Thanks in advance.

  I had the same problem, so I wrote them a letter with all my details to register for my laptop.

  Send by registered mail.

  I also had it with Virgin also.

  Thumberlina.

• I want to install my Vista in a new machine, will be what will have registration problems?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have

  • I removed my Vista on my computer because of the lack of Vista operating system file cache, I understand that there is now a patch to make it work properly. I want to install on my new machine, my local shop said I you will encounter a problem with the registration because it's another machine. Please can you guide me. Thank you.

  If Windows Vista was preinstalled on your old machine, it is attached to this computer, and you cannot install it on the new machine.

  If you bought Windows Vista software in a store, you can remove from the old machine and install it on the new.  There could be a problem with the activation (which is different then registration).  After installation, start the product activation.  If it will not activate online, use the phone activation option and explain the situation to the person who answers.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• CS 6 registration problem

  I bought the Photoshop CS6 upgrade and try to install it on a new computer that doesn't have my previous version CS5 on it.  (It has been installed on a laptop that suffered a catastrophic hard drive failure). The registration process wonder for my CS5 series # s that are not available for me because I bought the records and they are stored across the country. Any ideas on how to proceed?

  Thanks for the help, Jeff.  I contacted customer service and we have worked the problem.  I am running at the moment.

  Sent from my iPad

• An another registration problem

  Hello

  This morning, I recorded my new L300-1 to 6, but as registration info I entered wrong email and therefore did not receive registration confirmation e-mail, as well as not news/link for extended warranty. Can we do anything? Entered e-mail was [email protected] while it should have been [email protected]

  One more thing, registration address, phone number is mandatory, but in any format (except finally simple numbers), I entered it, recording Assistant complained that phone number format was not right without mentioning what was format expected which was very annoying.

  Kind regards
  Marko.

  Which country are you?

• Hotmail registration problem

  I connect to hotmail with screen name and a password, but it will never through. Then finally says "Internet Explorer cannot display etc.."

  Hi f f t,

  ·         Since when are you facing this problem?

  ·         Did you recently change?

  You can check if this article helps.

  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

  You can also post your query to Windows Live Solution Center.

  Hotmail - Windows Live Solution Center Portal

• VIXIA HFR52 registration problems

  Hi all

  I got a Six - month - old VIXIA HFR52 who shoots video flawlessly and in bright colors 80% of the time. However, sometimes the video comes out very low although my studio is very well lit. Sometimes it happens early in the filming, sometimes in the Middle, and sometimes at the end. It's almost as if someone shuts down half of the studio lighting, and everything becomes dim.

  Anyone have an idea what could cause this annoying problem?

  This is actually the second HFR52 has demonstrated this problem (I took the first return) but now it is.

  Thank you in advance and I'm shooting in auto mode.

  Doug

  drdoug26,

  There is not a mode of manual exposure on the VIXIA HF R52.  The closest thing is the program AE (P) mode, where there is an exposure compensation feature, allowing you to set an amount to lighten or darken the show if it is too much of one, but the camera still automatically selects shutter speed and openness that you continue to move the camera or the subject autour.  I think that the modification of your lighting is the best way to solve this problem in this particular case.

• I have problems getting into eprint because I had registered with aol. Registration problems.

  

  Not sure why registering with aol would cause problems when you try to create an ePrintCenter account. Have you ever had a Snapfish account? If that could be causing a conflict and you must register to ePrintCenter using the same email/password credentials that you used with Snapfish. If you are not sure, try logging on to Snapfish (Snapfish login) with the e-mail address you have tried with ePrintCenter and choose her you forgot your password. If she confirms that an e-mail has been sent to you with password reset instructions and then reset the password and uses it and the e-mail address to create your new account ePrintCenter.

  If you have never had a Snapfish account and record ePrint is a failure because it claims that the email address is already in use then you just create your EPC account using an alternative email address.

  Hope this allows you to get to market soon.

• Readycloud registration problems

  Hello.

  I have tried to register on the portal Cloud Ready and gives me error. I tried with firefox and chrome.

  

  To try again, gives me the message that already exists.

  

  Try to recover the password to rule out the possibility of a clerical error and gives me that there is this user. As with all mail.

  

  Hi Tonifree,

  Was this the same email address or ReadyCLOUD the user ID you used to create a new account? Gently, place it on the wire and the brand of that closure.

  Kind regards

  BrianL
  NETGEAR community team

• Choose the version of the IDE and App registration problem

  Hola,

  I use JDE - 4.5.0.7 to develop an application targeting suite device simulators,.
  1 blackberry Curve 8310 - v4.5.0.55
  2. blackberry Bold 9000 - v4.6.0.190
  3 blackberry Curve 8900 - v4.6.1.109
  4. blackberry Storm 9530 - v4.7.0.41

  I have a few questions,
  1 taking into account the compatibility of the applications before blackberry Platform [ref.this], is my choice for a decent IDE?
  2. If the answer is Yes, then but is not the 4.5.0.7 version (JDE) is lower than the 4.5.0.55 version (device)? or we can ignore the minor version (4 digits in the version)?
  3. I have written a simple test application and try to run it on, Curve 8310 Simulator, but it is not listed under Options-> Ad.Option-> the list of Applications? I checked,
  -It is app CLDC
  -Module system and autorun feature is disabled

  Any help is appreciated.

  Thank you
  FG

  3 download application via OTA is listed under list of applications.

• W7 Ultimate registration problems

  I have W7 Ultimate x 64 installed correctly (upgrade from XP) and work, the ID is OK.

  I want to move to a SSD, and I used my upgrade with a full installation DVD (since I already had on the other HD the W7 correct installation).

  During installation, W7 refused twice my product key, but he then normally.

  I taghout it was OK, I spent 2 days to install all my drivers, softwar. and the data.

  Now I realize that, in one more day, automatic activation ends.

  My product key is not accepted because I have been using the complete installation.

  What should I do? I don't want to go back to my old HD! I have thanks to my old Windows XP DVD

  Please help thank you

  The installed key is the default for Ultimate Edition key - and can never be activated.

  You must change the key for that which is given to you by your Uni and then activate that.

  To do this, you must do a repair install THAT the USE KEY.

• Resolution of Photoshop CC 2015 registration problems

  I use Photoshop CC 2015, when I check the size of the image it shows that it is at a resolution of 300 dpi.  However when I do export to JPEG 100% quality and then reopen the image in Photoshop it shows a 72 dpi.  Now if I save in JPEG it will keep at 300 ppi.  I thought that export was the right way to do it now, but I guess I'm wrong or I'm doing something wrong.  Please inform us on what is the right way that I save my files to keep the exact poi that I designed it.

  If you export save for Web, no resolution value is saved in the jpeg file. The resolution is meaningless on the Web.  When you open the jpeg in Photoshop, because the Jpeg format has no value resolution Photoshop don't set it in 72 dpi and the width and height to reflect the resolution of 72 dpi for the results of pixels Jpeg file has.  If you want to have a resolution of 300 DPI use Image size are of course re - SAMPLE jpeg format is NOT check and set the resolution to 300 DPI and click OK.  Not a single pixel will change what will happen is the resolution will be set to 300 DPI and the width and height will be changed to the setting of 300 dpi resolution.   If you want the saved Jpg file to have a resolution of 300 dpi, affecting the use "save under" select Jpg don't use 'save for Web '... export file type

  Export as seems to be using the Save to the web INTERFACE. It allows you to re - sample for the output size you want and the meta-data and convert sRGB to save under has no options to resize and convert the output file. Export seems to be Web oriented.

  

  .

• Did someone having registration problems and pay for photography of CC? I tried to pay with 3 browsers different and various links of their team of chat, and it seems that Adobe payment gateway is broken.

  I have a new iMac and already have a login from adobe. The payment gateway seems to be broken and Ive tried 3 different browsers, cookies deleted, etc.

  Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html