"An error occurred during the import of the source image"

Similar Questions

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• Many programs does he move not because "Error 1935. An error occurred during the installation of assembly'

  Error 1935. An error occurred during the installation of Assembly

  Microsoft.VC80.ATL.type = "win32", version = "8.0.50727.5592", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture is "amd64"
  It of a long story, but basically will not install Visual C++ 2005, Visual C++ 2008, neither will the window update or standalone. Many other programs like Acrobat will not be installed. giving me the same error. I tried clearing the log and restart, tried in safe mode, tried searching. A lot of people have this problem, few solutions.
  I use Vista Home premium x 64 sp2 and a processor intel T5800 (so it's weird that he said processor = amd 64 Architecture)
  Anyway, any help is appreciated. Looked everywhere, looks like I've tried everything.

  Hello

  This problem may occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Method 1: Follow the steps described in the article below

  Error message when you try to install an Office program: "Error 1935. An error occurred during the installation of assembly component"
  http://support.Microsoft.com/kb/926804
  

  Method 2: Also see the article below for measures to address this problem.

  Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version
  http://support.Microsoft.com/kb/970652

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

• An error occurred during the opening of the first CC Pro 2014: first a debug event

  An error occurred during the opening of the first CC Pro 2014: first a debug event

  [c:------cloudroom------frees------2014.9------shared-adobe-mediacore-mediafoundation\API\in]

  I don't know what to do, any help?

  

  Remove effects and Items.prfpset, located in custom presets

  C:\Users\\Documents\Adobe\Premiere Pro\8.0\Profile-

  When succesfull make new project and import an old into new.

  Need to maybe reset the current workspace and pull down of the audiotracks first to reveal videotracks.

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

  I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

  Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  

• Full backup impossible. An error occurred during the creation of the backup folder.

  Having had a HARD drive failure and have replaced I have now bought a WD 3 to WD My Book for Mac. Plug and put in place to save. However will not achieve, and gives this error message

  Full backup impossible. An error occurred during the creation of the backup folder.

  Does anyone else have this problem?

  Paul

  How the drive is formatted?

• After download, ' an error occurred during the preparation of the installation.

  Ok.  I'm not very good with computers, so I'm going to do my best here:

  I downloaded El Capitan last night, did the installation and rebooted.  The questions endless gray on the screen.  Relaunched in LANDAU several times; Install still 'stuck' 31 minutes downloading - every time.  Restarted in safe mode; install 'stuck' 24 minutes - every time.  I did the safe mode--> reinstalling OS X, which then made me download 'additional components' and then restarted automatically.  That put me right back to get 'stuck' to 24 minutes Setup.

  I could then go back to my previous OS X 10.7.5 then in safe mode (I don't remember how).  I have so found the OS X 10.11 El Capitan install file in my applications folder, tried running the installer again and got "an error occurred during the preparation of the installation.  Try to run the installation again. "I tried several times over with no different results.  I checked the date in the terminal; It is correct.  So I deleted the application (ten hours later!). Re-uploaded El Capitan on the App Store on the day the next day and just tried to run the installation program and still get "an error occurred during the preparation of the installation.  Try to run the installation again. »

  I do not have a "clean"... installation I didn't really know what it was before all these questions.  All my stuff is backed up via Time Machine on an external hard drive that...

  Any advice would be so appreciated.  I am at a loss at this point.

  Thank you!

  So, everything was OK, two days ago? On Lion OS?

  Of course, there was a hiccup during the installation. you said "makes installation and restarted."

  During the installation (Setup in the applications folder), it restarts after installation, it installs effectively while restarting. So I guess the installation never finished, maybe because you the restarted.

  This means that your operating system 'old' is always on it, but not completely healthy because of the "accidents" caused by ElCapitan failure install.

  So I propose:

  Connect your Time Machine disk (when not connected), start in the RecoveryPartition Time Machine restore, choose a date before that you tried to install ElCapitan, let him finish completely, it restarts automatically (I think). Then you are back where you started.

• Installation of El Capitan problem: "an error occurred during the preparation of the installation. Try running the application again. »

  I've been a fight 2 days now trying to improve my iMac 21.5 2009 end of Mavericks in El Capitan, but as the installation is about to be launched I get this message "an error occurred during the preparation of the installation. Try running the application again".

  Here is a list of all the things I've tried:

  Running the application again;

  Move the installation to another folder application;

  Control date & time and it was already correct;

  Do the installation in safe mode;

  Installation of the upgrade of another user I created only for that purpose;

  The computer restarts and I tried install the upgrade several times;

  And, to be sure that the installation application was not corrupted I made a copy of it on an external HD and tried to install it on my 2011 MacBook Air and it worked (I didn't install because I have El Capitan installed on my MacBook).

  Well, I don't know what else can be done, and I'd rather not have to completely restore my iMac.

  Please try installing again after taking each of these steps you have already taken it.

  Step 1

  Reset the PRAM from your computer.

  Step 2

  If possible, set the clock system as indicated here. If you can only boot into recovery mode, see below.

  In the OS X Utilities screen, select get online help. Safari will launch. While in recovery, you will have no access to your bookmarks or history. Load this web page.

  Triple-click anywhere in the line below to select:

  date 0801000014

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Quit Safari. You go back to the OS X Utilities screen.

  Select

  Utilities ▹ Terminal

  in the menu bar. It will open a Terminal window. Paste in the window by pressing the command-V key combination.

  Wait for a new line ending with a dollar sign ($) below what you entered. If it does not appear, press return.

  Quit the Terminal to return to the main screen.

  Step 3

  If your model has replaceable memory by the user and you have upgraded modules of memory, reinstall the original memory and see if there is any improvement. Make sure not to touch the Gold contacts. Clean them with a mild solvent such as rubbing alcohol. Spare memory must exactly match the technical specifications of the machine. Do not install more memory to the maximum value specified, even if a seller of RAM, or someone else, said you that it will work.

  Step 4

  Back up the data at least two different storage devices, if you haven't done so already. A backup is not enough to be sure. Backups are possible with Time Machine or disk utility. Preferably both.

  Erase and install OS X. This operation will destroy all the data on the boot volume, if you be better be sure backups.

• An unexpected error occurred during the generation of the Volume License Installer

  I'm building a Volume of NI Developer Suite 2016 DS1 License Installer.  I created the master suite and the installer from the DVD device drivers successfully.

  However, when I try to create tools Xilinx DVD separated issued with the Game Developer on I get the error "an unexpected error occurred during the generation of the Volume License Installer '.

  There is no other information.

  Nobody knows what is this 'unexpected error' and how to work around.

  Just worked it out.  The DVD contains 2 sets of tools; 14.7 & 2014.4.  You must come down with each of them separately, you can't just select the top-level of the DVD folder as you do with all the other discs in the package.  Would be useful if the error to a little more explicit.

• why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

  Hi James,

  Let us know a few details about the issue.

  1. which operating system you have installed on the computer?

  2. what web browser do you use to open itv player?

  3. are you able to play other videos online on other sites?

  If you use Internet Explorer, then you follow these methods.

  Method 1:

  You can run the fix for video problems in Internet Explorer.

  Playing video files crashes or blocking Internet Explorer - Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/

  Method 2:

  You can also follow the steps in the following article and check.

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

  Feel free to get back to us for other queries.

• Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.

  Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.

  Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
  [12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1

  I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.

  I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.

  Here's the Setup log:

  = Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
  MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
  MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
  MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
  MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
  MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
  MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
  MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
  MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
  MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement: 0
  MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
  MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
  MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
  MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
  MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
  MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
  MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
  MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
  MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
  MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
  MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
  MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
  MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
  MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi.

  ..............................

  ................................

  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 3840
  Property (S): VirtualMemory = 4312
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = acc
  Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
  Property (S): UserLanguageID = 1033
  Property (S): ComputerName = W1613
  Property (S): SystemLanguageID = 1033
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 19
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 12:40:37
  Property (S): Date = 01/03/2012
  Property (S): MsiNetAssemblySupport = 2.0.50727.4927
  Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = KPN
  Property (S): COMPANYNAME = KPN
  Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
  Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
  Property (S): UILevel = 2
  Property (S): MsiUISourceResOnly = 1
  Property (S): Preselected = 1
  Property (S): ACTION = INSTALL
  Property (S): AccountAuthenticatedUsers = authenticated users
  Property (S): AccountCreatorOwner = CREATOR OWNER
  Property (S): AccountPowerUsers = power users
  Property (S): AccountUsers = Users
  Property (S): ROOTDRIVE = D:\
  Property (S): CostingComplete = 1
  Property (S): OutOfDiskSpace = 0
  Property (S): OutOfNoRbDiskSpace = 0
  Property (S): PrimaryVolumeSpaceAvailable = 0
  Property (S): PrimaryVolumeSpaceRequired = 0
  Property (S): PrimaryVolumeSpaceRemaining = 0
  Property (S): INSTALLLEVEL = 1
  Property (S): Complus_XML_Data =

  Property (S): SOURCEDIR = SSO x64\SSO64\
  Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
  Property (S): ProductToBeRegistered = 1
  MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
  MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.

  MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.

  MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
  MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
  MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
  = Logging stopped: 01/03/2012 12:40:37 =.
  MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
  MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
  MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
  MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
  MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
  = Recording stopped: 01/03/2012 12:40:37 =.

  Hello Philippe Gupta.

  Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/newThread

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• An error occurred during the update error checking new Code 80072EFE

  An error occurred during the update error checking new Code 80072EFE

  error 80072EFE infected by a root

  Launch tdsskiller to find any rootkids, download and run from here

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe

  your computer will restart automatelly and start up. Then run the updates.

• An error occurred during the installation of microsoft install (MSI)

  Original title: an error occurred during the installation of microsoft install "during the installation of the Simulator professional siemens step 7.

  at the beginning of the installation process of professional Simulator of Siemens step 7 it told me to install MS for the installer; After agreeing to install it I have faced this problem as shown in the link

  http://Desmond.imageshack.us/Himg689/scaled.php?server=689&filename=13910106.jpg&RES=landing

  Hey Sheriff,

  -The program-specific question is?

  I would suggest trying the following steps and check if it helps.

  Method 1: Check if the Windows Installer Service is present and running on your computer.

  a. click Start , click RUN.

  b. in the run line, typeservices.msc and press to enter.

  c. find the Windows Installer Service.

  d. right-click on it and click on Properties.

  e. set Startup type to Automatic , and then Start the service.

  Try to install the software once again and check.   If the Windows Service install is not present or it cannot be started, then follow method 2.

  Method 2: Follow the steps in the Microsoft Article virtue and check following.

  "Windows Installer service could not be accessed" error when you try to add or remove a program in Windows XP or Windows Server 2003 http://support.Microsoft.com/kb/315346  

  For reference:

  Error message "the Windows Installer service is not be available" when you try to install Office

  http://support.Microsoft.com/kb/324516

  Let us know the results.