An error occurred when executing create user operation. Error: NO_SUCH_OB

Similar Questions

• XPath error occurred when executing unit Composite SOA testing

  I get the following error message when you run a Composite Test through the Oracle Enterprise Manager console.

  
  

  The strange thing is that XPath error does not occur when the same service is started from the client application - i.e. that it works very well when AQ puts a similar message on the queue. But when I put the same message in unit test, it throws the error of XPath.

  
  

  Any idea what steps I must take to get unit testing work?
  

  " < compositeTest compositeDN ="InvokeODIProject"xmlns =" http://xmlns.Oracle.com/SCA/2006/test "> "

  < on / >

  < start serviceName = operation "DequeueICom" = "Dequeue" isAsync = 'true' delay 'PT0S' = >

  < message >

  < part partName = "OBJ_CARRIER_OBJECT" >

  < content >

  < OBJ_CARRIER_OBJECT xmlns = "" >

  ICOM < SYSTEM > < / SYSTEM >

  < Interface_name > invoke ODI < / interface_name >

  < INTERFACEOPERATION > feed_staging_area < / INTERFACEOPERATION >

  < INTERFACEVERSION > 1 < / INTERFACEVERSION >

  < > 212 CORRELATIONID < / CORRELATIONID >

  < EVENTTIME > 2014-01-24T 12: 02:04.000 - 0000 < / EVENTTIME >

  < ACTION NULL = "TRUE" / >

  payload of <>

  < ODIRequest >

  < ODIUsername > * < / ODIUsername >

  < ODIPassword > * < / ODIPassword >

  < WorkRepository > * < / WorkRepository >

  < ScenarioName > TRUNCATE_CLAIM_HEADER < / ScenarioName >

  < ScenarioVersion > 001 < / ScenarioVersion >

  < frame > DEV < / context >

  < synchronous > true < / synchronous >

  < Session_name > INVOKED ICOM < / session_name >

  < / ODIRequest >

  < / payload >

  < / OBJ_CARRIER_OBJECT >

  < / content >

  < / part >

  < / message >

  < / run >

  < wireActions wireSource = "ODIInvokeProcess/ODIAgent" operation = "invokeStartScen" >

  < emulate duration = "PT0S" >

  < message >

  < part partName "part1" = >

  < content >

  < OdiStartScenResponse xmlns="xmlns.oracle.com/odi/OdiInvoke/" > "

  < session xmlns = "" > 1234 < / Session >

  < / OdiStartScenResponse >

  < / content >

  < / part >

  < / message >

  < / emulate >

  < / wireActions >

  < / compositeTest >

  [2014 02-04 T 10: 55:49.261 + 00:00] [AdminServer] [ERROR] [] [oracle.integration.platform.testfwk.TestCase] [tid: Thread-88] [userId: weblogic] [ecid: df7eb0dbec7f3140:-24efc088:143f879cee2, :-8000-0000000000036050, 1:17240] [APP: soa-infra] position of promotion message failed []

  oracle.fabric.common.FabricInvocationException: faultName: {{http://schemas.oracle.com/bpel/extension} subLanguageExecutionFault}

  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage}

  parts: {}

  Summary = < summary > XPath expression cannot run.

  An error occurs during the processing of the XPath expression; the expression is oraext:parseXML(bpws:getVariableData('Receive_TME_OUT_Dequeue_InputVariable','OBJ_CARRIER_OBJECT','/ns3:OBJ_CARRIER_OBJECT/PAYLOAD')) / / ODIUsername.

  The XPath expression cannot run; the reason was: internal xpath error.

  Check the detailed origin described in the text of the exception message and verify that the XPath query is correct.

  < / Summary >

  code = < code > < code > XPathExecutionError}

  cause: {XPath expression cannot run.

  An error occurs during the processing of the XPath expression; the expression is oraext:parseXML(bpws:getVariableData('Receive_TME_OUT_Dequeue_InputVariable','OBJ_CARRIER_OBJECT','/ns3:OBJ_CARRIER_OBJECT/PAYLOAD')) / / ODIUsername.

  The XPath expression cannot run; the reason was: internal xpath error.

  Check the detailed origin described in the text of the exception message and verify that the XPath query is correct.

  }

  at oracle.fabric.CubeServiceEngine.post(CubeServiceEngine.java:626)

  at oracle.integration.platform.blocks.mesh.AsynchronousMessageHandler.doPost(AsynchronousMessageHandler.java:142)

  at oracle.integration.platform.blocks.mesh.MessageRouter.post(MessageRouter.java:197)

  at oracle.integration.platform.blocks.mesh.MeshImpl.post(MeshImpl.java:215)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

  at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)

  to com.sun.proxy. $Proxy361.post (unknown Source)

  at oracle.integration.platform.testfwk.execution.TestFwkService.launchNormalTestCase(TestFwkService.java:416)

  at oracle.integration.platform.testfwk.execution.TestFwkService.launchTestCase(TestFwkService.java:203)

  at oracle.integration.platform.testfwk.execution.TestFwkService.runTestCases(TestFwkService.java:546)

  at oracle.soa.management.internal.ejb.impl.SOATestBeanImpl.executeTestCases (SOATestBeanImpl.java:129)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  Hello

  Apparently not very well... Why it is oraext:parseXML if the content is XML already? The QA message probably has the payload in a CDATA tag...

  See you soon,.

  Vlad

• an error occurred when executing log checking script specified calc for dtls

  I get an error message occurred while execution log checking script specified calc for dtls. This occurs when users save data in the online form (there are 2 rules attached and we chose run on customer service option in the properties of the business rule) and it took 10 to 15 minutes, then a meesage gets displayed error has occurred during execution of the specified calc script.
  
  I ran the same Regional service console management rules, they work very well. Can someone help me with this.

  Hello

  For a long term business rule I would not recommend their execution save, they are probably timing out in planning, long runnning rules are generally best left regular, eas, launcher web or possibly from the menu of business rule in planning.
  If you want to run them from planning you should look into sending them in a background process, this can be set for some time. For more information on how to do so have a read of:-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch02s07s06.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• 'LOB not supported for type' error occurs when executing DBMS_LOB. FRAGMENT_INSERT

  Hi all
  I'm trying to launch DBMS_LOB. FRAGMENT_INSERT, but got error saying:

  ORA-43856: Unsupported LOB type for SECUREFILE LOB operation

  Suppose I have the following code:

  declare
  note_clob clob;
  note_clob2 clob;
  note_bfile bfile;
  buffer varchar2(10000);
  note_var varchar2(10000);
  warning int;
  dest_off int:=1;
  src_off int:=1;
  lang_ctx int:=0;
  amount int:=1500;
  
  begin
  --Create temp
  dbms_lob.createtemporary(note_clob,true);
  
  --Initialize BFILE
  note_bfile:=bfilename('TEMP_DIR','note.txt');
  --Open bfile
  dbms_lob.fileopen(note_bfile);
  
  dbms_lob.loadclobfromfile(note_clob,note_bfile,dbms_lob.lobmaxsize,dest_off,src_off,0,lang_ctx,warning);
  
  dbms_lob.fileclose(note_bfile);
  
  --Fragement Insert
  amount:=3;
  dest_off:=10;
  buffer:='end';
  dbms_lob.fragment_insert(note_clob,amount,dest_off,buffer); <==LINE 30
  
  --Read
  amount:=50;
  dbms_lob.read(note_clob,amount,1,note_var);
  
  dbms_output.put_line(note_var);
  end;
  /

  and I got:

  ERROR at line 1:
  ORA-43856: Unsupported LOB type for SECUREFILE LOB operation
  ORA-06512: at "SYS.DBMS_LOB", line 1076
  ORA-06512: at line 30

  What did I miss?
  
  Better subject.
  TA.

  only recently switched to 11g and 10g DBMS_LOB have FRAGMENT stuff

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28278/e43750.htm suggests

  ORA-43856: not taken object Type supported for operation SECUREFILE LOB
  Question: A SECUREFILE Lob operation was published on an unsupported object type.

  Action: Don't use this function for BASICFILE LOBs.

  Seems DBMS_LOB. FRAGMENT procedures work with LOB secure files only. :(

  Concerning

  Etbin

• An error occurred when querying for the pending operations

  Original title: sysprep problem
  I have an acer aspire 5738Z, I use windows 7 (64 bit) I try to open sysprep.exe and it does not open, a text box appears saying "an error occurred when querying for the pending operations. What can I do to fix this?

  Hello

  Thanks for posting the request in the Microsoft community forums.
  I understand that you receive the error "an error has occurred when querying for outstanding operations" when trying to open sysprep.exe on the computer.

  You can try the solutions provide and check if it helps solve the issue.

  Method 1:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the steps above fail then you can try the steps and check.

  a. run regedit by typing regedit in start search by pressing ENTER.
  b navigate to the following key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
  Key: RegistrySizeLimit
  Type: REG_DWORD
  Value: 0xffffff (4294967295)
  c. reset.

  If you need help with Windows, keep us informed. We will be happy to help you.

• Error-63101 when executing the FPGA Interface C API Generator in LabVIEW 2012

  I'm using LabWindows CVI 2012 and 2012 LabVIEW FPGA module.  I try to use the FPGA Interface C API generator and I get the following error from a freshly generated .lvbitx bitfile.  I use the local server compiles on my PC.

  Error-63101

  NOR-RIO: A valid .lvbitx bitfile is required. If you are using a valid .lvbitx bitfile, the bitfile maybe isn't compatible with the software you use. Determine which version of LabVIEW was used to make the bitfile, upgrade your software to this version or later, and then try again.

  The problem occurs when executing CVI or LabVIEW.  I was able to do this earlier when I was compiling the FPGA in LabVIEW with the API generator 2011 downloaded from the Web site.

  A bit of weirdness in my setup, it's that I charged it off downloads from the website (latest files after 2012 NIWeek) rather than the normal distribution DVD.  I installed LabVIEW, so NI RIO, then the Xilinx tools compatible with 2012.  It works very well when you talk to the FPGA to a LabVIEW vi running on my Windows PC to the host.

  Any suggestions?

  Problem solved.  I had to download FPGA Interface C API generator 12.0.  It works now.

  I would have thought that if a product was called on the menu in LabVIEW 2012, it would be prompted to upgrade to a compatible version, when I installed LabVIEW.  The old version is not compatible with version 3.0 bitfiles, as identified on the following lines at the top of the .lvbitx file:

  
  
   3.0

• Issue when executing the planning of business rules

  Hello
  
  I get the following error when trying to run a Planning Business Rules of EPMA production environment. The same rules of business work without any problem in UAT which is exactly in line with the production.
  
  Getting the following message while starting business rules:
  
  Error detected while trying to perform the work: naming rules
  
  Newspaper:
  
  [ACTIVE] ExecuteThread FATAL: '2' for queue: com.hyperion.planning.calcmgr.HspCalcMgr '(self-adjusting) weblogic.kernel.Default"- cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  -Cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  
  FATAL Thread-2352 calcmgr.launch - Server/Application/base of data: localhost Business Rule Name: user: M05 FP data planning.     Exception: com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  Please could someone tell if you're aware of something like this?
  
  Thank you
  Jean

  Remove essbase Server console of Regional service,
  Add Server Essbase with IP address or host name and try again.

• AD and Exchange provisioning is successful but fails to create user IOM

  Hello
  I try to configure exchange 2010 by using Exchange Connector that I customized. When I create user in IOM, AD provisoning begins, then AD user is created, then Exchange provisioning starts & Exchange gets put in service. At the moment where it all happens, IOM page displays error on the page and the user is created.
  Now when you search user with that ID, then no user found in IDM. When user is created in AD and Exchange.
  Please help me to solve the issue.
  
  
  
  Thank you

  These problems are solved by the elimination of the technique of possibilities. If you think that Remote Manager is the cause of questions, just don't call it. Fix rather just tcCompleteTask.

  If the user begins to have created then, fine. The reason why we Remote Manager.

  If not then remove all custom as pre or post handler, if any, pre fill adapters, if any, custom, if any process tasks. Hope you got the theme behind this technique.

  Try to create the user after the removal of each component.

  The moment you are able to create users, you have identified the problem.

  All the best.

• Failed to retrieve attribute values when executing the validation on update

  IAM trying to do validation on user create and update operations:
  
  currently able to perform validations on iam create user operation
  (Note: my validations require organization name which iam get using form user act_key only)
  
  but when I try to trigger the same code for update, it do not recover key, infact the same code does not even get attribute values.
  given that I don't get any key of the organization. together to update validation failed.
  
  My EventHandler.xml looks like this:
  < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" >
  
  <!--> custom validation event handlers
  <-validation Manager
  Class = "test. IOM. EventHandler.UserFormFieldValidation ".
  entity-type = 'User '.
  operation = "CRΘER."
  name = "UserFormFieldValidation".
  order = "1000" / >
  
  <-validation Manager
  Class = "test. IOM. EventHandler.UserFormFieldValidation ".
  entity-type = 'User '.
  operation = 'CHANGE '.
  name = "UserFormFieldValidation".
  order = "1000" / >
  < / eventhandlers >
  
  Please suggest what needs to be done in this case.
  Note: iam using the same code for postings of these two operations (operation to create and update the operation of user profile)
  
  Thanks in advance

  as mentioned above:
  get the key of the user and then get the name of the organization.

  You can get the params modifed by using:
  HashMap orchVal = orch.getParameters ();

  You can use this to get the fields that you can still use to your validation.

  Note: If you change an attribute and do not send any value he always added to the card with the value null.

  It may be useful

• I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/filter

  I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?

  Hi Anthony,.

  You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom

  Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.

  Provide the permissions to read and write to your identifier and then close.

  Then reopen Lightroom. You should be able to open Lightroom.

  Please let us know if it helps.

  Kind regards

  Tanuj

• An error occurred when creating an application

  With the help of EMP 11.1.2.3.

  I want to create a classic application.

  I created the user database with all of the grants.

  I created a data source in EPM.

  When I try to create the application, it returns "an error occurred when creating the application."

  I searched through all the directories of newspapers and can not find a single log file that captures the reason for the failure.

  Last time that this happened, someone said I should check and make sure that all services were running.  I'm not quite sure where to look for this on a Linux machine.

  I don't know where to another to watch, or what else to do.

  Any suggestions would be helpful, because I am relatively new to EMP.

  Thank you.

  Bingo, now, you must run the configurator and check the details of planning for the datasource planning repository. It should point to your R & A schema. If its correct.

  Then, change the details to have your outline plansys and redeploy the application planning both by the configurator. In the end, you will need to reconfigure the web application of the Foundation. so that all the information updated in the registry.

  You can check the location and measures of reference in my post above.

  Hope that solves your problem.

  See you soon!

  SH! going

  PS: If your outline plansys have tables of HSPSYS_, then you will need to select drop and re-create option of the configurator. as the safest stages, you can take backup of plansys.

• After installing Adobe CC with LR and Photoshop, PS works but opening of LR, I have two error messages.  An internal error has occurred.  Cannot create the necessary folders: myusername/Users / / Library/Application Support/Adobe/Lightroom develop presets

  Error messages when you try to open LR of CC.

  An internal error has occurred.

  Could not create the necessary folders:

  MyUserName/users / / Library/Application Support/Adobe/Lightroom/develop presets

  AND

  An error occurred when attempting to change modules

  Please see if the solution posted here helps: could not create the required folder

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• An error occurred when trying to share &#60; folder name &#62;. There is no end point for more available from the endpoint mapper. The shared resource was not created at this time

  Original title: sharing folder error

  How to solve this error message when I am trying to share a folder: "an error has occurred when trying to share . There is no end point for more available from the endpoint mapper. The shared resource was not created at this time. »

  Hello

  Were there any changes made on the computer before the show?

  I suggest to see the link and try to run the Troubleshooter:

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  File sharing essentials

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

• I'm trying DVD maker allows you to create a slideshow of photos and music: "year error occurred when burning the DVD.

  I'm trying DVD maker allows you to create a slideshow of photos and music. I can set up just fine. When I try to burn the DVD, I get an error message while it's coding. "Year error occurred when burning the DVD" no other information available. Any thoughts on the problem and how to fix it? I can save the project.

  Running windows 7

  original title: cannot burn DVDs

  Hello

  You can disable video filters in Windows DVD Maker, and then check.

  Video filters in Windows DVD Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions