Similar Questions

• IRQL_NOT_LESS_OR_EQUAL blue screen. No luck with the help, can't "Repair computer". Help, please!

  Whole new generation that has been very well,

  Mobo: EVGA P55 SLI,

  Processor: Intel Core i7 860,

  RAM: Mushkin matched 2 X 2 = 4 GB

  PS: Blue Antec 750W

  GPU: EVGA Nvidia GTX 260 SLI (x 2)

  HD' Samsung 750Go (x 2) RAID 1

  DVD RW

  Blue Ray RW

  OS: Vista Edition Home Premium 64-bit

  System has been great from the GET go, there are more than 2 weeks. Never a failure to the no boot, no lock ups etc. Woke up in the middle of the night last week with cmptr attempt to restart. No new software or hardware installed had been. Nothing worked, quiet dampened.

  From there on, I was not able to start Windows.

  I entered the BIOS and tried to start a well known point... nothing. Always get blue screen. I have reset the CMOS on the mobo, removed the battery on the mobo and reinstalled. I unplugged the two hard drives power and SATA cables, bought a NEW (third) HD and installed, with only one new HD connected, with a full version of Windows Vista DVD in the CD/DVD drive, tried to boot Windows from scratch... still get the blue screen?

  Blue screen says:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  If this is the first time...

  Check that any hardware or software is installed correctly.

  technical info:

  STOP: 0X0000000A

  (0xFFFFFA8D839EFB18),

  (0 x 0000000000000002),

  (0 x 0000000000000001),

  (0xFFFFF8000A481DD2)

  I was able to run the memory test and it came back without errors. I was not able to get to "repair your computer", as the beginning is never far away. When the computer reboots, it comes to the sequence: normal mobo beeps (five) than even that when the system was working fine... then I get the graph of the mobo splash screen EVGA P55 SLI,... then black screen with "Windows loading files"... which appears just above the loading bar (it looks like gage fuel fill from left to right).

  Once the bar then "fills" Blue Screen of Death!

  It's EXTREMELY frustrating because it was built for me by an employee of INTEL (very smart read), all latest drivers etc. Very little software loaded on the system. Most of the aid that I read guess you can operate within Windows already... Catch 22! I can't!

  Hello

  You get beeps when it worked? This is not normal.

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  =======================================

  Think that material:

  Added new hardware, updated drivers to date (don't forget to check in Control Panel - Windows Updates - pilot
  updates), or add key software lately? Pilots and security/antivirus/antispyware products are also likely
  suspects. Next message is my generic driver updated methods to use when you get to this section of the
  troubleshooter.

  You can access Mode without fail - repeatedly press F8 as you start - last good configuration or system restore known?

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Look in the Event Viewer to see if something is reported on these reboots.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  BCCode: a

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the Windows Advanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  -------------------------------------------------------------------------

  It is my generic troubleshooting tool and can probably give more specific help when you give the ICC codes.

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Could I get a free replacement for the phone that was diagnosed with the liquid damage clause?

  Hello

  It's Vincent of the India.

  My iPhone 5 exploded randomly while I was listening to music, about 2 weeks back. Don't turn on since.

  The inspection service center claimed to have found traces of liquids on "residents" of the device and thus were classified in accordance with the clause of liquid. I was asked to pay more than the price of the phone for placement.

  I understand that there is no free replacement phone or the motherboard, my question is how safe are that it is not a fault of Interior?

  The phone is 4 months warranty, purchased online. No physical damage. I have no reason to lie when I say that I don't 'accidentally' drop it in the water. Why can't they consider a real case? In addition, what might have caused the problem?

  Some experts of the forum online YouTube wrote this saying, "close the seat or the higher in the order." He has not just you being stuck with a defective product. Exactly how to do this, if I could?

  Everything what I'm trying to understand is why should it unlucky customers such as I have pay the price for something that I'm sure that's not a fault on my side? Should not be a system in place for situations like this?

  Other iPhone - official Apple Support repairs

  How much will cost to fix an iPhone 6 with water damage?

  more

  cost of water damaged iphone

• I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to look for a screen tested on it, it didn't work

  I have an iphone 6 it is damaged by water but I set myself and the person put it on charge and tested it with a multimeter and it worked perfectly but when I went to get a screen tested on it because she does not have the person had not on is it did not work, even if the person has used only flow to correct and get a few corosions out with the replacement of some components of the person responsible for 10 minutes after having plugged in and the battery it wamer so it as I said her test with a multi meter test and he registered 12v and I wondered if something was wrong with it and if I could fix it easily?

  Check the liquid Indcator of Contact.

  Instructions here > liquid for iPhone or iPod is not covered by the warranty - Apple support

  Just so you know, the service of the liquid damage to an iPhone or iPod is not covered by the limited warranty of one Apple or an AppleCare Protection Plan (APP).

• Hi, I have an IPhone 4 with IOS 9.3.5 s and I can not download Whatsapp. The download button has a photo of clouds and a down arrow. Help, please

  Hi, please help. I have an IPhone 4 with iOS 9.3.5 s. I can't download Whatsapp, the download button is a cloud with an arrow down. Before I used to press the Get it button installs. Please help thanks

  Hi Simbonge!

  I see you are trying to download WhatsApp.  It is important to be able to download your applications, so I'm happy to help you.  The cloud icon that you see indicates that it is an application that you downloaded before.  To download, type right on this cloud icon and it should download to your iPhone.  You can read this article for more information:

  Download your latest purchases

  Thank you for using communities of Apple Support.

  See you soon!

• The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  The AirPod are compatible only with iphone 7? Or we can use it with more than 6 s... or any android device?

  Here are the tech specs: http://www.apple.com/shop/product/MMEF2AM/A/airpods

  They are bluetooth devices, so they work with the iPhone 5 or more.

  See you soon,.

  GB

• I can't restore my iphone even with DFU

  I can't restore my iphone 6s, I always get different errors as 3004, 3194, 2005... etc. I tried the DFU, same results, I tried on different PCs with IOS 9.3.3 and 9.3.5 with no luck, can anyone help me?

  Hello

  See if there is something you have not tried in this article to support > If you see error 3194 or "this device is not eligible for the requested build" in iTunes - Apple supported

• How can I sync my iphone 6 with macbook air?

  How to sync iPhone with mac book air?

  Can someone tell me how I can synchronize my iPhone 6 with Mac book Air. My i message not receive properly on my mac book.

  Follow the steps here

  Continuity allows you to connect your iPhone, iPad, iPod touch and Mac - Apple Support

• my iPhone 6s has water damage and I was wondering if apple can replace

  Hello my new iPhone 6s has water damage. I was wondering if the apple store could replace the phone because it is not repairable. I sent the phone for repair and they said that it is not repairable. so if I give the apple phone can I pay them how ever much they will give me a new phone. Incidentally, I don't have apple care.

  Please answer as soon as POSSIBLE thank you

  Out of warranty replacement of reduced price for the iPhone 6s is US $299, adjust to your location if necessary.

  The replacement iPhone will be same color, memory, locked/unlocked state as donor iPhone at the time of

  original purchase.

  Make a Genius Bar reservation to avoid delays

  http://www.Apple.com/retail/Geniusbar/

• How can I sync my iphone contacts with outlook 2016 6 more?

  How can I sync my iPhone contacts with outlook 2016 6 more?

  Hello Ronusmc,

  I understand that you want to synchronize your contacts with Outlook 2016. It's something I can help you with.

  If you are wanting to use traditional synchronization, then I would start by using the first link below. It will guide you through connecting your iPhone to your computer and looking at the different content tabs sync back. For your more precisely, you can the Info tab because this is where the contact synchronization options.

  Sync your iPhone, iPad or iPod touch with iTunes via USB
  https://support.Apple.com/en-us/HT201253

  If you use iCloud, then you want to get the iCloud for Windows app. This will set up your sync for you without having to actually plug your iPhone to your computer. Take a look at the article following if you do not want to do.

  Download iCloud for Windows
  https://support.Apple.com/en-us/HT204283

  Take care

• I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  I use airplane mode on my iPhone 6, with wifi and I still receive calls. I don't want to. How can I change?

  -do not disturb - the settings on

• Can I hide (display: none ;) web content app with liquid if no content was involved?)

  I can hide the "Details" link in this web app with liquid if no connection has been entered? < a href = "{link tag_page}" > here < /a > details - http://mdbrick.BusinessCatalyst.com/special-offers - If so someone could provide an example of code to do it please? See you soon

  Yes you can do it with the liquid. In the example, it depends on what means "detailed information" in your example below. You can get from size or make a {% if this! = "" %}}

    {module_webapps id="WebAppNameHere" filter="all" sortType="weightreverse" render="collection" collection="exampleList" template=""}
    {% for example in exampleList.items -%}
      {% assign hasReadMore = example.["Summary"] | size %}
      {% unless hasReadMore == 0 %}
        Read More
      {% endunless %}
    {% endfor -%}
  

• How do I sync my iPhone 6 with Microsoft Outlook 2016 installed in my Mac

  How to sync my iPhone 6 with Microsoft Outlook installed on my Mac?

  Go to settings > Mail, Contacts, calendar > add a new account and add the same account that you use with Outlook on your Mac. You can use the construction in the Mail application or download the Outlook from the App Store application.

• My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

  The steps here talk about everything that you can do other than take it to an Apple store with proof of purchase.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• New iPhone synchronize with the existing iTunes account?

  I just bought a new iPhone 6 and they (Verizon) took all the Info off my current iPhone 5 and added to the new phone, contacts, calendar, e-mail...

  I synced my iPhone per day for iTunes using Outlook for calendar and Contacts.

  I made from my old phone to iTunes Cloud backup before you perform the switch but normally sync locally to my PC.

  Now, I want to synchronize my iPhone 6s with existing iTunes account.

  All I have to do differently or just sync as usual.

  Your PC will detect that this iPhone is 'new' and your phone will ask if trust you him.

  After that, restore from a previous backup should work without problem. It will replace all current data on your phone... i.e.: new photos, etc.

  You can use the backup to iCloud as well, but it's requires firstly, erase your phone and use the internet to get your data back. Usually much slower.