Suddenly, my magic mouse not, turn on even with new batteries.

Magic mouse does not light

Are the batteries installed correctly (polarity?) If Yes, then you may need a new mouse.

Tags: Peripherals

Similar Questions

  • Microsoft 5000 wireless mouse does, even with new batteries

    My wireless mouse was running perfectly for a while, and then for a few days the wheel flickered red (no message on the screen). He then stopped working all together. I replaced the batteries, but it not - light at all! No lights or anything like that. Meanwhile, the keyboard still works perfectly.

    16 March 2015 it is today and I was able to find the problem (at least for me).

    Remove the two batteries and then re-install.

    Apparently when replace you them one at a time, the system becomes confused or something (I don't know, as I'm not an engineer). If you get them both at the same time and * then * begin replacing them, it seems to work fine.

    Weird, I know.

  • My HP Officejet Pro Wireless is not printing black even with a new cartridge.

    My HP Officejet Pro Wireless is not printing black even with a new cartridge.  Help!

    Hello

    Of course check that the cartridge is very savvy.

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    Good luck, you need to update or reinstall the latest driver.

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    The main issue is probably the drivers, but these can help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • PSC 1400v 'check ink cartridges' seeing rest even with new cartridges

    My COPS 1400v 'check ink cartridges' stays on even with new cartridges. I have Windows 7.  I followed the troubleshooting tips to clean the contact points, but not luck.  I bought a carton of off - brand, who worked for a few weeks.  This is the error message at startup.  I replaced the cartridges with the HP brand, but the error light does not turn off.  All advice is appreciated.  I know that this thing is so outdated, but that's all I have right now.  Thank you very much.

    It looks like a case of rejection of the cartridge. You can have a bad ink cartridge, or something more serious. If you have tried all the steps in the document below, then you should try to do a hard reset. If this does not work, the cartridge may be bad and need replaced. Sometimes you get a bad right cartridge against the package. If after changing the cartridge again and again all the troubleshooting steps did not receive the printer print, then you may need to replace the printer.

    Check lights print cartridge flashing:
    http://goo.GL/viF23

    To do a hard reset:
    1. make sure that the printer is turned on.
    2. pull on the power cord from the printer.
    3. pull out the power cord from the wall.
    4. wait for 30 seconds.
    5. plug in the printer and turn it on.

  • Magic mouse not recognized not recognized as such

    I buy a Magic Mouse for my MacBook Pro 2, but which is recognized as a normal mouse. I can only move and use the two

    bottons (scrolling and other functions does not work)

    I installed OS X Yosemite 10.10.5 after formatting. I never use another bluetooth mouse.

    I try to reset the PRAM and SMC but the Magic Mouse does not work. I'm sure the mouse works because I tested it on another Mac.

    When can I solve this problem? Thank you much advantage.

    Hi, take a look at this article, it should help If your Apple wireless mouse, keyboard or trackpad is not working as expected - Apple Support

  • Magic mouse, not scroll after sleep

    My magic mouse stopped scrolling when I wake my MacBook to sleep 2016.  I use El Capitan 10.11.5.  The only way to restore full functionality of the mouse is by restarting the computer.  I watched a lot of historic messages with similar problems, but nothing has solved the problem yet.  It's very frustrating.  Any help appreciated.

    But you did not provide key information.   What is a former Magic Mouse 1 or the new Magic Mouse 2?    Now that you have upgraded, the MM1 only partially work with El Capitan.   You will need to buy the new Magic Mouse (MM2) to ensure full functionality with El Cap and his successors.

  • Recently bought the magic mouse not found

    not found when it is connected with the mouse cable

    Bluetooth enabled

    You use OS 10.11.3 El Capitan with a new Magic Mouse 2.

  • iPad pro is not turn on/off with create Logitech Keyboard box after 9.3 updated

    I updated my iPad iOS 9.3 Pro and now when I close the case keep it turned on, even, if it is disabled, open the casing is not turn on more. Does anyone else know this?

    I'm having the same problem.  very frustrating!

  • Re: Satellite C660-1F1 won't turn on even with the AC adapter is plugged

    Hello

    I need help.
    I have a portable c660-1F1. It will come with the charger plugged.
    Trying to hook up without the battery and it will not turn on. I don't know what the problem is.

    I took the battery and took out the charger and you press the button power for 30 seconds and nothing.

    Did a CMOS reset and nothing.
    Took one on the memory and replaced it, but nothing.

    I don't know what the problem is. I even took the internal battery and see if that makes a difference.
    Nothing happened. Still won't turn.
    I think it may be the internal fuse if there is?
    Or if could be the port if the laptop? The charger works fine.

    The battery life is very good and I think I'm out of options and I'm afraid that it might be the motherboard and if yes, then I guess I can replace the card mother, but don't know if it works.

    Can someone help me?

    > The battery is fine and I think I'm out of options and I'm afraid that it might be the motherboard and if yes, then I guess I can replace the card mother, but don't know if it works.

    It looks like the motherboard.
    It would be the worst case, because the new motherboard is really expensive: about 300

    Do you think that its worth a try? I have not... in that case I would ask a technician to check the hardware.

    What would you do if you buy a mobo and finally you will discover that it is not question of mobo?

  • HP Photosmart C310 print black even with new cartridge

    HP Photosmart C310 cannot print black. Replace the cartridge and ran clean printhead multiple times. Still nothing. Print head alignment failed. Printer does not turn off with power button. Recycled/restarted by pulling out the plug, count to ten and reconnect it.

    Nothing changes except power button works again.

    The steps in this post can help.

  • FIXED: Photosmart 635 does (even with fresh batteries)

    have not used the camera in a year.  I put new batteries.

    -green light comes on but nothing works.

    -on/off switch causes nothing (the lens does not move)

    -is there some sort of factory reset available?

    FIXED: used end of the paperclip to reset hardware camera (hole in the battery compartment)

    In fact, I found a manual online that says where the hard-reset

    (a small hole hidden inside the battery compartment).

    I used the end of a paper clip.  has had 2 tried, then camera work!

  • Magic mouse not clicking or scrolling on El Capitan

    Hello guys! Need your help, after the OS X update:

    clicking or scrolling is not my mouse!

    tried to check the disk, I did reset Pram, I matched and pair the mouse many times, once my mouse managed to their normal use here at work, but when I turn the Mac and turn it on on my house the mouse did not answer.

    I called the apple support and the guy says reinstall again cause should be a conflict I did and nothing.

    and I still have piles:

    How the mouse moves and sometimes I click thing isn't a hardware problem... then u can give help?

    grateful for your help

    now all of a sudden is clicking but I'm afraid to turn off it!

  • My mobile mouse 3000 does not work even with new battery, no green light on USB, when connect to the system, it says unknow device USB

    the system says: one of the USB connected to the computer with multifunctioned, and windows does not recognize it.

    Hello

    · What is you receive the exact error message?

    Follow the steps in the links below and check if this can help: Troubleshoot failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

    Troubleshoot the failure to find new mouse connected to your USB port: http://support.microsoft.com/kb/223256

  • Satellite A100-225 is not charging even with new battery

    Hi, having a problem of load. Laptop turns off suddenly while using. Tried to start but power light turns off and it stops again. With connected battery and ac adapter on the power light blue and yellow light of the battery lit a few seconds and then stops, not allowing does not start up.

    The old battery thinking it was this and my laptop starts fine just using the AC adapter because it is how I am currently this announcement. Replace the battery and the power light comes and turns off again every few seconds and prevents the starting upwards.

    Bought a new battery thinking it was defective, but nothing helped, exactly the same problem.
    Let the laptop to charge that battery again noticed but light blue and yellow power battery light goes on and out together all few seconds.

    If I try to start the laptop while the power led is turned on, it begins to start but as soon as the power light turns off, it stops. My thoughts are the unit load inside my laptop is in short-circuit, but I'm no expert.

    Anyone have any idea what the problem is, and it would be expensive to fix as I just spent £48 on a new battery for e.

    Thanks Mick

    > Back up battery and the power light comes and turns off again every few seconds and prevents the starting upwards.

    Are you sure that the battery is compatible? did you buy the genuine battery from Toshiba ASP?
    I think that 3rd party retailer batteries may not always be compatible so I would test the laptop with a battery that is recommended by Toshiba.

    On the other hand, it could be a motherboard problem, but if the notebook starts successfully by using the AC adapter, I wouldn't quite sure if he s really a motherboard problem.

    Also try this:
    Remove the battery and adapter, press the power 30 sec long.
    Then insert the battery and connect AC adapter and check if you could power the unit up.

  • HP Photosmart C6280 prints not Magenta or Light Magenta even with new ink cartridges.

    Our HP Photosmart C6280 has always produced excellent results, but all of a sudden it won't print Magenta or Light Magenta, although they show of 75%.  We even tried to put in new ink cartridges, but they still does not print.

    Hello

    As OEM HP is responsible for the good operation of the printer and their drivers. Check with
    HP support, their documentation online and drivers and ask in their forums.

    HP - Photosmart C6280 - Product Support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP - Photosmart C6280<- set="" to="" your="" version="" of="" windows="" for="" the="" proper="">
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =============================================

    These might help:

    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Find the manufacturer's Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

    Find and install printer drivers in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for