An unexpected error has occurred. Error # 16828 - Air update

Similar Questions

• Why not my wireless capability on again after that an unexpected shutdown has occurred?

  Why not my wireless capability on again after that an unexpected shutdown has occurred?

  Hello

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you are having problems with wireless capabilities does not not after stopping.

  Method 1: run the troubleshooter and check if it works.

  Using the troubleshooter from network in Windows 7

  Method 2: Perform the steps from the link below and see if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

  Meet us if you experience problems with the wireless connection or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• XP/SP3-Sysprep 2.0 error has occurred... updating registry

  I've seen several posts with Sysprep and the error "an error has occurred all trying to update your registry database" cannot continue. But no coherent solutions.

  Get this error by using the sysprep.inf file. No mass storage section. The .inf worked prior to the loading of applications. Don't know what went wrong. Someone at - it solutions? Been working on this for a while.

  See KB 981542 below

  http://support.Microsoft.com/kb/981542/

  It's for Windows 7 but Windows XP had a similer fix. (included in Win 7 SP1)

  See also this KB a 818171

  http://support.Microsoft.com/kb/818171

  Those two helped me. Make sure it is a new clean install & apply (XP)? Hotfix.

  Also some drivers may cause problems after sysprep when the machine installation itself.

  Not to mention that I don't remember, I almost stopped install XP and those that I do not receive an updated image more

• Time capsule, an unexpected error has occurred

  Hello everyone, I am having trouble with my Time Machine for a month or two. He was unable to make a back-up, even if the light was green all the time. Now, today I tried to set up again as before, but each time an EEG this message: an unexpected error has occurred. Try again.

  I did: a hard reset, soft reset and close my modem with every single device connected to it.

  I use a 2011 Macbook Air (on OSX El Capitan) and the fourth generation time Capsule.

  Thanks in advance.

  You have an adapter Thunderbolt-to-Ethernet for the MacBook Air?

  If so, you can use that to set up a wired connection to the Mac to one of the three LAN <>- ports on the time Capsule to see if a direct connection work better than wireless to try to set up the Capsule time again.

  If you do not have this card, you should really consider to buy one, because it will be useful when you want to have a wired connection much more quickly from your Mac to the time Capsule.

  Maid in Gigabit Ethernet Adapter - Apple

  If you do not have the card, or do not have one, then we can try to change a setting on your Mac to see if it can help with connection problems. After the back if you want to try this.

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• An unexpected error has occurred - Apple tvOS 9.2

  Since my Apple TV 4 Gen tvOS 9.2 update, I have problems w / playing some movies I have purchased through iTunes. Get "an unexpected error has occurred" and an ignore"" button. The titles of films even play fine on my Macbook, iPhone and Windows PC. Replaced my Apple TV 4 material during the weekend but the problem persists with the replacement unit. Contact Apple Support confirmed reports addtl of the problem and how it could be related to a recent change in the backend to the iTunes store. Help w / titles problematic movies. If anyone knows the same thing, support both want to hear from you.

  Have the same problem
  bought nine ATV4

  Do not play anything on the account

  Does not buy new movies

  "Unexpected error".

• Satellite U300: "an unexpected i/o error has occurred."

  Hello

  My newly purchased U300 worked fine, today would not start and is now indicating that an unexpected i/o error has occurred, with a code of 0xc00000e9

  The message preceding that States that this may be due to recently responsible for hardware or software. Not apply.

  Any help appreciated, thanks

  Janie

  Hello

  These errors are often errors in registry. Could be caused by some software disk cleanup or somehing else who has access to the registry system´s.

  The only option is to fix the system with an original disc of Windows Vista. If you don t have such a, then you will recover you the system because your registry database cannot be recovered, and the system must be completely replaced.

  If you do not already have: backup your personal data... That's all

  Greetings

• Unexpected i/o error has occurred

  Just got a laptop from a friend that he trampled during the move.
  The detection area is a small little shriveled up, very little.

  I turn it on and load the Toshiba screen, then when trying to load Windows right after the Toshiba screen it goes blank for about 20 seconds and it appears.

  + Unexpected i/o error has occurred.
  http://img502.imageshack.us/img502/6388/dsc01098l.jpg

  Is it just a matter of getting a new hard drive? Or the motherboard could be poached as well?

  Hello

  If you don t have a CD/DVD drive and then I'd forget all this tests
  You need the CD/DVD drive to reinstall the OS again if you have the bootable CD.

  If your computer supports USB booting, then you could try to reinstall Win XP from bootable USB drive flash.

  For that check out this tutorial:
  http://www.jcmiras.NET/surge/P96.htm

  Welcome them

• Satellite L300: Failed to retrieve - unexpected i/o error has occurred

  Help, please...

  I'm trying to restore the orginal through recovery process.
  After pressing F8 at start-up stage and chose to restore the system, he thinks about it, and then comes back with the following error;

  STATUS: 0XC00000E9
  INFO: An unexpected i/o error has occurred

  There is also an explanation it may be due to an external device that has not been properly disconnected or a hardware error.

  I have nothing plugged and restarting the system several times to try to resolve the problem. I also tried to re-boot last secure configuration, but this has not helped (although now gave me my card back like this so that other issues have been a problem - that is why the desire to recover the original system settings).

  Any advice would be greatly apprciated.

  Thank you.

  Hello

  Allows summary;

  -You are not able to start the Windows operating system (even in safe mode)
  Right?

  -You are not able to recover the laptop with HARD drive recovery option.
  Right?

  -You don t have a recovery disk
  Right?

  Well in that case I n t see any other solution for new order recovery disk and then try to recover the laptop using this disc.

  You can order the CD from recovery here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Status: Unexpected error has occurred. The timeout of waiting for an answer UVSC error internal

  Work with labview ARM and it was working fine this morning.  I went to run a program and the build failed with the following message.

  [13: 34:50] status: error
  An unexpected error has occurred.

  [Source: the timeout of waiting for an answer]

  Internal error UVSC

  Detail: [UVSC_PRJ_LOAD, MSG: 0x1000, STATUS:]
  [0x1] code: 1]

  Did normal things as restart the computer.  Plug and unplug the Board of Directors of the computer.

  I tried to reinstall the whole arm labview and it does not work.

  Even from labview so you go to tools > ARM > show keil does not work either.  I can open keil in itself, but it doesn't seem to be communicating with labview.

  Figured it out.  Somehow the projects I was working on has been corrupted somehow.  After another reinstalled, I opened a sample project, not one of the many that are mine, and it worked.  I had copy and past the code on the project and in a new, but it works.  Don't know how my projects I screwed up in the middle of work on them.

  Now, back to actually do the work.

• Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.

  Hello

  I have a server running on a Windows 2008 R2 server DPM 2010

  Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.

  The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.

  EXCEPT

  Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:

  An unexpected error occurred on the DPM server machine during a VSS operation.

  Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)

  3 volumes are on 3 different servers.

  All 3 servers are running Windows 2003 SP2

  3 servers have other volumes that are save successfully and consistantly

  There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.

  I can run shadow copies on these three volumes on servers

  All servers run the latest DPM Agents

  3 volumes have unused production capacities, Gig instead of Mb

  The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.

  There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server

  I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.

  I ran the Windows updates on these servers

  So far all I can say the disk permissions look OK and match those of the other volumes of work.

  I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.

  Hello

  I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923

  Thank you.

• Fix the installation Center has encountered an error - an unexpected error has occurred

  I had tried everything to install the Microsoft difficulty It Center but get the same error at all times and have no idea why.  The error message is:

  Fix the installation Center has encountered an error

  An unexpected error has occurred.  Close, and then try to install again.

  
  

  Of course I tried this several times with the same results.  I am logged on as administrator and cannot find any specific details as to why it persists.  Can you help me?
  

  Dave

  OK, besides it seems that this happens if AutoPlay is disabled (!).

  http://social.Microsoft.com/forums/en-us/fixitcenter/thread/9089abba-ACA9-4833-ab71-c863c69d696d

• Cannot install LifeCam HD-5000 on Windows XP - error "Setup cannot continue because an unexpected error has occurred."

  Original title: 953691

  Installation of webcam LifeCam HD-5000. I'm on Windows XP and you get to halfway through the installation and error message came through. Three times so far.

  Error message reads

  The installation cannot continue because an unexpected error has occurred

  http / / microsoft.com//kb/953691 support

  Any suggestions?

  Hello

  ·        Have you tried the steps mentioned in the article KB 953691?

  ·        What service pack is installed on your Windows XP system and version, 32-bit or 64-bit, what has?

  If you have not tried the steps mentioned in the article then, I suggest you try the steps and let know us if the problem is solved or not.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  If you use Windows XP 64-bit, then the LifeCam HD-5000 is not compatible.

  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• An unexpected error has occurred that this application cannot recover from. It will now close: ___Unexpected code: 3221225477__Unexpected address: 0051EAAB

  This happens everytime I open a session.

  When I started my computer an error code appeared as follows: unexpected ___An error has occurred that this application cannot recover from. It will now close: ___Unexpected code: 3221225477__Unexpected address: 0051EAAB

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• Unable to start my laptop, error: an unexpected error has occurred. Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

  When I tried to boot my Toshiba laptop, I get the message that unexpected error occurred.  Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

  \windows\system32\ntkrnlpa.exe file status: 0xc0000098

  Windows failed to load because the kernel is missing or currupt

  My computer did not come with an installation disc.  Best Buy has it

  I need my laptop, can anyone help.

  You download and make the disks to another computer.

  If you continue to have problems to take your machine to a repair shop.