an update of bios nx9010 WITHOUT floppy!

Similar Questions

• Pavilion BIOS 7330Z without floppy drive installed

  I have HP Pavilion 7330Z and BIOS had bad battery.  New battery in and says disk BIOS not installed.  Unmodified system, just new battery...  Maybe the default settings are bad?  I'm looking for BIOS manufacturer (doesn't show in the Installer) to check why not "auto-detection".  Update BIOS on my other PC, but don ' t know how to load without floppy!  Also try to load XP but the difficulty to start XP installation CD (what is a FN key) or maybe BIOS related?

  DocLogic

  Removed the cables and to noted model / SN just for later use.  Restored the default settings in the BIOS and it was there "installed".  Maybe dust connection (OLD PC) or BIOS? Now boot from the disk very well!

• Updating BIOS for Tecra 8000 without floppy

  I searched this forum a solution update the BIOS without a floppy drive. The only one i found was this thread [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=66966&tstart=0], but there is no file .iso for the tecra 8000 series.
  is there a solution to get the new bios installed on my tecra 8000 without any floppy drive?

  I checked Toshiba BIOS download page on http://www.toshiba.eu/innovation/download_bios.jsp and TRAD BIOS version is proposed. This old Tecra is maybe 10 years and now, Toshiba has offered traditional update the BIOS only.

  Win versions are later available with latest Tecra 9000/9100.
  I'm sorry.

  Maybe stupid question now, but why do you need the BIOS update?

• PROTECTED P4000 - update the BIOS without a floppy drive

  Hello

  I have a P4000 protégé who, I believe, was initially purchased without floppy drive. Now that I'm the Win XP operating system upgrade I need to install more memory, and like many other forum members point out it will not work without a BIOS update.

  However the BIOS available on the site is for the installation of Tranditional only and requires a floppy drive (which I did not). Is it possible to obtain a version that runs under Windows, or find another way to start the traditional installation? The site seems to suggest that the installation of Windows is favored, but the software is not provided.

  Thank you.

  Hello Sir

  As much as I know upgrade memory is not dependent on the latest version of the BIOS, and if you use compatible module there are not any problem. Anyway, I'm not 100% sure but I think you can do the BIOS update using the SD card.

  If you have the time and opportunities please try it and let us know if it works.

  By the way: all the updates to the BIOS are on the Toshiba download page and there are no other versions.

  Good bye

• How can I update the BIOS without using a CD?

  Hello!

  I recently decided to update my RAM from 2 GB to 4 GB. After installation, I started my computer to find that it would not recognize the new memory. After doing some troubleshooting, I decided to try to update the BIOS, like the 2010 version. I have downloaded the update to the BIOS boot CD implementation of lenovo, burned a disk and restarts, I found that the boot order has no CD contained thereon. Here's the catch: I do not have the supervisor password. It is a mobile phone in hand, and I tried to find the password nothing is done. It's the current boot order: USB key, hard drive.

  My question is, can I create a BIOS update disk using a USB key, or update the BIOS of another way?

  I understand that it is impossible to recover the supervisor password without having served (that I prefer to not do, even if I have to return my Crucial RAM)

  My system features:

  ThinkPad L512

  BIOS version: 1.04

  BIOS date: 2010-3-26

  Controller of Embeded Version: 1.01

  Windows 7 32 bit

  Thanks for your help.

  Welcome to the forum!

  Two things here:

  (a) If you run the system update, it should offer the latest BIOS for your machine as well. I never did on a protected device, so it may or may not work, but perhaps worth it.

  (b) I doubt the ability of the system to recognize the new RAM has something to do with the BIOS. Much older than your ThinkPads will take place 4-8 GB of RAM with an old BIOS, older than your machine initially.

  Good luck.

• I have improved my AZC-606 to 10 Windows without updating the BIOS of last year

  This is a step that I completely missed, as far as I know at the time, that acer had no information about the update and it's the first time I installed a Windows operating system - zero that I leaned on for the characteristics of the facility he said nothing about the BIOS (and there was nobody at Acer). Windows 10 has worked without problem on the machine. The only problem I had on a regular basis (and not always, but most of the time) is when the computer restarts it stalls on the Acer screen. I usually don't bother using the option restart. All that said, my experience of Windows 10 has been pretty good, and the machine running on most of the time was reliable, but I'm at a point where I want to go back and do a clean Windows installation.

  Now, I used the media creation tool to make an ISO. But the last time I used the MCT to paste directly to a flash drive, then maybe I'll do that once again. On the BIOS, I am a total n00b, so I don't know anything about. I assume it's something that I can still do / have done for me before installing Windows if I didn't not messed up already enough things. I'm kind of fishing for the answers that I have not yet to have questions for.

  What are my options, and what is the best option for me at this point? As I said, the Windows front-end runs under the best conditions in the State, and this backend that can go on is just invisible to me. Restart the computer just seems out of whack.

  Sorry to be verbose and vague.

  Since you always have a working windows installation, you can update now, and then perform the clean installation.

  Updating the BIOS is very simple and simply follow the instructions in the Readme inside the zip package.

  But firstly check you current BIOS version:

  key of the Windows logo + x

  Run

  type

  Msinfo32

  Check the BIOS DATE/version

  the latest version of the BIOS is P11. A4

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_P11.A4_A_A.zip?acerid=635513517099228329...

• Tecra A6-EZ6311 - update BIOS Win without success

  I updated the BIOS through windows and asked to restart my Tecra A6-EZ6311, but not restarted, the LEDs light up but the screen remains black.

  I downloaded the BIOS and recorded a bootable cd and started wearing notebook FUN + N keys, it speeds up stick lights and other lights on the keyboard, but nothing happens and I did the same thing with the USB key but don't no flashing lights pendrive. I wonder if I still have a chance to save my laptop and how to proceed.

  Ports USB flash not the stick, download the bios in pendrive? Computer turns on but the screen remains black, if you press the Fun + B connect the laptop with accelerated fan and other acessas luzez on the keyboard, as if waiting for the loading of the bios. But where can I download is not flashing in USB key and write the ISO Bios in the CD player turns the cd a few times and then nothing happens and I left for half an hour and unresolved.

  Thank you very much.

  Hello

  I found your laptop on the Toshiba support page we:
  http://support.Toshiba.com/support/modelHome?FREETEXT=1364534
  Here, I could also find compatible BIOS version.

  I downloaded the BIOS package (this is the exe file). But could I unzipped the package by clicking right and select unpack here.
  I found the Readme.txt file in the BIOS folder. You will find instruction how the BIOS updated to work.
  There was also a notice indicating that BIOS KeyInstallation method, can sometimes be used to recover from failure. If it is not the case, you will need to contact Toshiba authorized Service Provider (ASP) to solve this :(

• Satellite Pro A60 - update the BIOS without OS

  I have a Satellite Pro A60, trying to install XP pro but says he needs the BIOS update, downloaded the new update, unzipped and that one file, will not start until no bootable files.

  There is currently no OS on the laptop, I understand that I need an ISO file but where is she... !...

  Hello

  Why you need to update the BIOS?
  I doubt that XP installation says that you need to update.

  Normally the update of the BIOS is a bit risky and must be that if she of really necessary. In addition the update of the BIOS can only be done from Windows. There is no DOS version, they available only authorized for service providers.

• How can I update the BIOS without windows on V3 - 372

  I bought an ACER V3-372-57CW and refuses the computer at startup (the Green ACER splash screen at boot EFI appear same) when my Tablet WACOM Intuos 4 (if not fully functional) is inserted any USB port. Customer service Acer not recognize wanted to nor register the question so my last hope is that a BIOS update will solve the problem.

  I'm used to the manufacturers supplying utilities executable flash BACK running under FreeDOS etc but for the Acer V3 - 372, I can only find an executable for Windows 10. Of course, uninstalling the entire system just for the update of the BIOS is not a viable option.

  Is it possible to get either one executable for the update of the BIOS BACK or something that could be used from within Linux (with EFI)?

  Thank you

  Masquilier,

  At the present time, I have installed on my Windows computer.  If someone were to tell me that I needed to install another operating system to update the BIOS, I don't think it was a big deal.  I would like to...

  1. create a system with the Windows image backup

  2 clean the clean disk with 'diskpart '.

  3. install any OS they told me that I had to install.

  4. update of the BIOS

  5. after updating the BIOS, I would just wipe the drive with diskpart and restore my Windows system image.

  6. it would take me less than 45 minutes to accomplish steps 1 through 5.  Probably about 30 minutes to be honest.

  Use my logic.  Except that I'm not a Linux expert and don't know how to do what I tell you with Linux.  Just google it.  I see that some people use clonezilla, but I don't know there is a command to do the same.

  https://help.Ubuntu.com/community/DriveImaging

  http://AskUbuntu.com/questions/106943/back-up-the-whole-Ubuntu-system-or-system-image-creation

  http://AskUbuntu.com/questions/19901/how-to-make-a-disk-image-and-restore-from-it-later

  Check with the Ubuntu forum and tell them what you need to do and I'm sure it's possible.

  Important note: own Diskpart is priceless, if you n-front-rear of switching between the old modes and UEFI... or deleting partitions... or clean installation of an OS.  However, make sure that you don't accidentally wipe the bad drive (drive).  Be careful.  There is step-overs.

  Tip: you can get Vanilla iso free Windows from the links below... If you forgot to create a USB factory default your Acer Windows OEM recovery disk.

  https://www.Microsoft.com/en-us/software-download/Windows10

  https://www.heidoc.NET/Joomla/

  And create a media installation with rufus.

  https://Rufus.AKEO.IE/

  Tip2: the link below has some tips and tricks for cleaning 8.1 of Windows Installer or Windows 10.

  https://community.Acer.com/T5/V-and-VN-series-laptops/Acer-Aspire-v3-772-Windows-8-1-clean-install/t...

  Tip3: always back up your personal files before you try everything before.

• Update the BIOS on the Satellite 1900-803

  I just tried to update my bios on the recommendation of Microsoft because of reported serious CPU/bios conflicts.

  The routine bios flash downloaded seems to work well from the disk for about two minutes then suddenly shut the computer laptop everything without warning. The machine has restarted but only with a screen empty and not yet start either from floppy disks or hard drives.

  The front panel LED screen display the infrared icon in solid red without any Flash (there is no reference in the instruction booklet).
  I tried several keystrokes on re - boot from information obtained via google searches on the internet. None of them seem to make any difference. Supplied with the machine recovery CD does not work either re-boot when it is used with the recommended C more switch button power switch.
  I thought you are trying to reset the password using one of these parallel port fixers described on the net?
  Other ideas on a way forward?
  I guess that Toshiba offers no guarantee with their routines in the bios even if I lost a considerable amount of important data?

  Kind regards
  James

  Hello

  You are right. The guarantee only if no coverage of this misfortune.
  It seems that the laptop does not start because you have updated the BIOS with the wrong version or the wrong update procedure.

  Most of the time it's not easy to estimate what might be the problem.
  Maybe you are a lucky man and the BIOS chip be flashed only once again using a special procedure.
  In the worst cases, the jury is dead and you need a new

  Seems so you will have to contact the service technicians in your country.
  Ask guys for details and handling plus good luck

• Impossible to update the BIOS on Satellite L40 - 14 H

  Hi, guys!

  I'm actually use portable L40 - 14 H with BIOS 5, 40 - WIN (for XP). Back to Vista x 64 I have try several times to update BIOS to 1, 90 - WIN (for Vista) in Windows mode, but nothing...

  Any ideas how to do without floppy USB drive?

  Hello

  The BIOS you want supports the Vista 32 bit and not 64-bit update. Therefore, it doesn t work!

  > Do you know the difference between 5 and 1, 40 - WIN (for XP), 90 - WIN (for Vista)?
  One is for Vista and one for XP ;) there is a difference!

• Yet WT8-A-102 stops suddenly and updated the BIOS

  I bought a Toshiba still WT8-A-102 (not part no PDW09E-00100EEN) to the end of 2014. I upgraded from Windows 8 for Windows 10 Home Version 1511 without any problem in 2015.

  I use it for a limited number of applications - Office365 and navigation, generally with Chrome and Hola VPN to access certain geographically limited websites, for example TV channels, watch movies and content recorded from my TV (these are generally. TSV format); I run the free version of Malwarebytes and AVG anti-virus.

  I have two problems I can solve t.
  
  1 stop abrupt
  For a few months now, it always turns off suddenly, always exactly 30 minutes after the start. There is no warning, the screen goes black and that s it. You can immediately restart and continue as before, but the same thing will happen again after another 30 minutes. It happens that it s plugged in or on battery power.

  I can find no reason for this. For example:

  • It didn't happen when I've upgraded to Windows 10 but a few months later.
  • The battery does not turn down.
  • The Tablet does not heat.
  • It occurs regardless of whether you ve been using the Tablet constantly for 30 minutes or simply turn it on and let it idle.
  • Sleep and stop times are set to one hour.

  I ve looked at event viewer and the only things there are a few system errors showing which means nothing to me (a server is not registered within the required). Certainly, there is nothing that happens in the few minutes before it turns off suggesting a reason.

  Any ideas please?
  
  Update 2 BIOS

  I ve installed the different Toshiba updates available for this model. However, the update BIOS doesn t work. She is currently the version 1.60. I ve downloaded the version 1.80 for this model on the desktop. The zip file is bios-20150722112320. I extract it and it starts the process. The Tablet goes on to say it's reboot and then a panel will appear that says:

  InsydeH20 Flash secure
  Invalid firmware image!
  Press any key to reset the system

  It s a Tablet! While they want me to? I ve you press buttons - Windows and volume - but nothing happens. If I just leave it, it turns off after 30 minutes and we re back with BIOS version 1.60 and I can work as usual.

  Although this seems excessive, but suggestions please?

  Thanks a lot for any advice,
  John

  It seems that your problem is similar to mine. I'm having the same random stop downs https://forum.toshiba.eu/showthread...-Error-Code-10 also I have an error code 10 in Device Manager. The agenda called "Intel Trusted execution engine Interface"... are you facing the same error?

  I sent my tablet at the service of Toshiba, it has been over a month now and still waiting to be informed about the problem!

• Updating the BIOS is dead the satellite Pro P300-1AY

  Hi all

  found this forum and really hoping that he can help me!
  I bought a satellite Pro P300-1AY two years ago, it cost me £900 nr so I thought it would be worthy of a purchase.

  A year ago the USBs stopped working, I do it every working solution I could think of anything will do, finally gave up and learned to live without USBs!

  However, a few weeks ago, the laptop at the start stop, I didn't get was the black screen. Probably a video problem I did all the memory check hard drive everything else, however, it was only an intermittent problem, I found if I he tilted on the side she would begin, another thing to live with!

  But two days ago, I heard that if I've updated the BIOS, it could solve all my problems. so I went to the Toshiba site, found the BIOS updated and downloaded, but to halfway through the installation, the laptop froze and I couldn't t he put it off and had to take the battery out to turn it off!

  And ve you may have guessed, he's now won t start. Even its worst, LED lights, and if I put a disc in the cd I can hear it whirring, but that s it.

  Is - this irreparable? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?
  Ty for your time in reading :)

  Hello

  > Is it irretrievably? I ve heard of priming of the cd with the original BIOS with a combination of keys or I'm hoping against hope?

  Well, usually the BIOS could once again be reflashed, but you would need a traditional version of the BIOS update.
  This version is available for Toshiba FSA.

  So you will need to get in touch with a local ASP technician that could reflash the Rom BIOS module.
  Eventually, after this update the specifications would be stable.

  Good luck

• Update the BIOS - protected A600 problem

  I'm trying to update my BIOS settings on my laptop (that I was invited to do by the service of Toshiba hardware update).

  I followed all the instructions provided by the program because it extracted and ran the update. However, the computer began the reboot process, but has been 'disconnected' windows (Vista Business) for about an hour now. I don't know how to stop the process without causing serious damage to my BIOS, but this does not seem normal.

  Help, please!

  Hi wilreb...

  I think that the user henharas a bad experience with the BIOS updates.
  I updated the BIOS many times and never had any problems...

  I assume you mean on Tempro software... this software informs you about updates on the Toshiba page. It is not a recommendation for an update, but simply an alert that new updates has been published...

  If your laptop is running properly, then update the BIOS is not really necessary...
  You must follow these tips; never change a running system ;)

  In any case, after the update of the BIOS shouldn't take too long and if she has completed, you should see the new version in the BIOS settings...

  Check it out...

• HP Omen: update the BIOS

  HP support assistant shows that there is the following update:

  HP notebook System BIOS update
  Number SoftPaq SP74378
  version F.34Ap1

  tried to download and install without success

  should I worry?

  Thank you

  Hello

  Thanks for posting in the Forum from HP Support.

  No, no need to worry.

  Updated the BIOS/UEFI is not a critical task and I would say that you leave like this for now.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but can introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  Update/update IF you have any specific questions that you know have been fixed in the new version or for some serious security issues. Otherwise, keep the existing version as long as possible.

  See you soon!