Tecra A6-EZ6311 - update BIOS Win without success

Similar Questions

• I have error codes 80070079 and 8007045 D, have tried to install updates several times without success

  Hi all

  I have error codes 80070079 and 8007045 D, have tried to install updates several times without success. They are made to security update & probably really need them.  I was able to other updates but not those four for the last month or two.  Thanks for your help!

  See if this thread is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-7-error-code-8007045D-cant-install-updates/03258f34-3f25-4134-B194-6c18b4acf521>

  UTC/GMT is 01:30 on Monday, July 9, 2012

• Tecra R840-PT429E - update Bios message: this computer is not supported

  When I try to install the bios update 12/09/12,3.90-WIN(EC_KBC1.60) I get the following message: this computer is not supported.
  Updated the BIOS, I downloaded from the section of the Bios Toshiba for Tecra R840-PT429E update, windows7 64 bit.

  Hello

  Is the a reason to update the BIOS or you want to update the BIOS simply because the new BIOS is available?
  You have a serious problem with the laptop?

  I have no day BIOS, even if the new BIOS is available for my laptop because I have no problems.

  However, the BIOS requires the VAP (value added package).
  This package can be downloaded from the Toshiba UE driver page
  If there is a problem with the VAP, the update of the BIOS would not start.

  So reinstall the VAP to check if this may help

• Tecra A9 - 11i: update Bios problem and AHCI works not

  Hello

  I have trouble to update BIOS for a Toshiba Tecra laptop A9 - 11i, (with the last update of the official European website of toshiba); After running the bios (version 3.2.8) Launcher
  "I get the message" this computer is not supported "? The latest version of the bios installed is 1.5, date 05/07/2007

  also if I can add a few questions:
  the function keys tdlo can't seem to work;
  led for the "FN" key light turns on when the key so assume the FN key works, but there is no response when you press on the "FN" key and one of the number keys on the f - I installed the software of the control unit as have been advised but this has not resolved.

  I also have difficulty accessing the AHCi ' mode to work in Windows XP Pro SP3. I chipset intel 965 m + ICH8M, the Intel ICH8M serial ata storage controller-2828 present in the Device Manager - the matrix storage manager does not work so I copied the file iastor.sys from the folder Manager matrix in C:/Windows/Driver/system32 and changed the registry as read elsewhere on the forum but have had no joy.

  any advice would be greatly appreciated, thank you very much.

  > I am having trouble updating BIOS for a Toshiba Tecra A9 - portable 11i, (with the last update of the official European website of toshiba); After running the bios (version 3.2.8) Launcher
  "I get the message" this computer is not supported "? The latest version of the bios installed is 1.5, date 05/07/2007

  This error message appears if you want to update a BIOS that is not compatible with your model of laptop.
  Toshiba pilot European page provides the BIOS 2.10Win for this model of laptop.
  If you have used certainly bad BIOS.

  > There is no response when you press on the "FN" key and one of the number keys f
  Controls of common modules the FN keys.
  If the issue should be resolved install common Modules v 6.06.00, 4.30.15 utilities
  Notes; You need to press FN + 1, 2, 3 etc. DON T press FN + F1 etc.

  > I also have difficulty accessing the AHCi ' mode to work in Windows XP Pro SP3. I chipset intel 965 m + ICH8M, the Intel ICH8M serial ata storage controller-2828 present in the Device Manager - the matrix storage manager does not work so I copied the file iastor.sys from the folder Manager matrix in C:/Windows/Driver/system32 and changed the registry as read elsewhere on the forum but have had no joy.

  First be sure that the AHCI is enabled in the BIOS.
  In addition, the Intel Storage Manager controls the AHCI so you should integrate the AHCI driver to CD Win XP as described here:
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm
  or here
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Update blackBerry Z10 without success

  Good afternoon

  I'm updating my Z10 operating system without success.

  Geographic area: Netherlands

  My version of BB: STL100-2
  OS version: 10.0.9.2372.

  I insert my SIM card and launched the blackberry link.

  He tells me that I have an update. I click on install and I go to install the software - restart my device

  When it is completely reloaded it tells me that I still have the old version of the operating system. I tried this 3 times already, that nothing works.

  I hope I'm not the only one with this problem. I uninstalled link and installed without success.

  Thanks in advance

  You are currently on the latest version. What is happening is that you are either carrier b apps pushed deleting or (b) remove built-in OS Blackberry apps. The operating system recognizes this and pushes the apps for you. It's a little frustrating, but the quick solution is to create a folder (such as "USELESS CRUD", which is what mine is called!) and all the programs that you do not want to go in this folder. Then bury this folder on the last part of your home pages.

• Don't recharge Tecra S11-119 - updated BIOS question too!

  My computer is a year. It was quite well, until I noticed that he had ceased to charge the battery. After some googling I found that there could be an update of the BIOS, that I had missed. When you try to install the BIOS update, I get a message saying I need to plug in my computer first (which is always that the dough is not a charge).

  BIOS update program says he wants to be updated as follows:

  BIOS version: current Ver.2.60--> updated Ver.3.20
  THIS Version: Current Ver.1.80--> updated Ver.1.90

  OS: Windows 7
  BIOS file I downloaded: bios-20110714132558

  Is this a known problem with a fix available?

  Hello

  Are you sure that you have downloaded and used the good version of the BIOS.
  I have read about similar error message and finally the used user isn't compatible BIOS.

  In addition the VAP (value added package) must be installed to update BIOS! In case you, I recommend you to reinstall this tool too.

  But I'm not quite sure if the BIOS update will help you solve the problem of battery m
  Maybe you need to replace the battery

• Tecra M4-138: update BIOS (i) 3.40 (ii) Slim Select Bay HD

  (i) recently (12/06/2007), Toshiba has released an update of the 3.40 BIOS which can be done only through windows. I own a Tecra M4 - 138 running Win XP Tablet Ed and since now I've updated windows fron BIOS (now it is under v3.30). But the last update can be satisfied! After you run the update, it displays a small window with the label 'run... '. "and a bar running and... that's it! After waiting nearly an hour nothing happenned. I called the local dealer and they advised to perform decommissioning if the system restarts to repeat the procedure and if the problem continues to avoid the update. Is this (thankfully)! Because I don't know if this update fixes important and by default, I tend to be updated, any valuable advisor?

  (ii) I'm trying for some time to put a HD (secondary IDE) to my Tecra M4-138 using the Slim Select Bay drive HARD adapter (PA-3134U-2CTE), an IDE interface and... of Toshiba 120 GB HD... SATA (!) all bought them 4PC GMBH (a Premium Business Partner of Toshiba...). In any case, after not receiving their share of response to my posts, I decided to use this SATA HD as external USB and I am now looking again for a 2.5 "HD (IDE) put in PA-3134U-2CTE. The question: what can be the maximum capacity that resists the Slim Select Bay?
  ?:|

  The update of the bios version 3.40 is logical, but it is not necessary if you are running a stable system.

  There are two major improvements:
  1. exit TV (S-Video) is compatible with Windows Vista now
  2 Improments about Chipset Intel

  If you have a floppy drive there is another possibility for updating the bios.
  Extract the 3.40 bios. Copy the files chgbiosa.exe and BIO0026T.COM on the diskette.
  Now you can perform the update of the bios as described in the http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000000b07 Bios FAQ in the traditional update section.

  According to your second problem:
  Tecra M4 has no real limits on the size of hard drive in the Bay of select. The only thing you have to rememer is Tecra M4 has an INTERNAL Serial ATA HDD but select bay with a selectbay for Parallel ATA HDD adapter.
  So I wonder you bought a SATA HARD drive - for this slim selectbay adapater. PATA HDDs will only fit in!
  Back to your question once again. You can buy any real 2,5 "PATA HDD for this card. To get the good HARD-Adator disc on the HARD disk, you should consider buying a drive hard Toshiba selectbay in Catalog option (for example PX1340E - 1 12)

• Update the firmware without success

  Help!

  I updated the Firmware of my CLJ2840 all in one and the device is now insensitive:

  Device: HP CLJ 2840

  Installation: network printer

  OS: Win 7

  Drivers: Installation of the Standard Win 7 drivers

  I downloaded the file 2800_Series_FW_Update - 20120307.exe on the HP support site.

  I followed the instructions to the letter.

  I waited for the installation of the firmware to complete in its entirety

  I have noticed the messages shown on the device LED panel that followed the procedure.

  I noticed the face smiling at the end of the installation on the computer

  Result:

  Feature cycles as follows:

  1 turn on

  Toner of cycle 2 drums as usual

  3 LED panel shows marks in the upper part

  4 LED flashes once and 3 LED bars begin to scroll from right to left...

  5 witness bright and alert light stay lit

  6 this continues for about a minute... then the cycles of line 3... over and over again

  The device is no longer visible on the network

  HOWEVER

  Even invisible on the network, I managed to run the program from firmware to success... a second time.

  Help, please!

  Our office is stuck without this printer.

  Thank you

  Hey Rota, the product that you have is a printer. These commercial products can be a little tricky. For the best chance of finding a solution, I would post in the forum for HP Business Support.

  You can find the Board Commercial LaserJet here:

  Business - LaserJet HP Support Forum

  Take care!

  Sean

• Tecra A7 - after update BIOS it does nothing

  Hi all

  I d/l and ran the "windows" BIOS update for my Tecra A7 model. Feeding, I watched the update go through all the steps, including the backup BIOS, but in the last step 8 of writing for the BIOS, looks what it hung. I waited over 2 hours and decide to restart.
  You guessed it, now I have absolutely nothing - no Toshiba screen, no BIOS, nothing.

  Is there a way to reset the BIOS or restore the backup? I don't have the recovery CD (laptop ready to work - no idea where the CD so). I am applying for DVD with Toshiba (if in fact he help me?) but in the meantime no matter what good techies out there? No floppy no CDROM drive only.

  I'm lookin to my Board of Directors, where is the battery? Rock on Bros.

  Hello

  Firstly the Toshiba Recovery disk will not help you. It can only restore the operating system (Windows) and has nothing to do with the BIOS.

  Also in this case you can't do so because the need for assistance from an authorized service provider. Only authorized technicians can try to reflash the ROM here module, you can search for the nearest:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Firefox starts up. Said 'it's embarrassing... "but do not restore or close because never answers. Updated and restart without help. Cannot access the options.

  Unresponsive. Updated and rebooted without success. Can't seem to 'options' due to no response. Always 'it's embarrassing... "but to restore or close button ends up making inadmissible browser. Closed with Taché also. Can't get into safe mode.
  BP-20b2f065-d592-4b67-8020-7714a2130305

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Question about updating BIOS for my Satellite M40

  So, my laptop does not start, but works recovery procedure. Support suggested me to update my Bios.
  OK, given that the last time, it was easy.

  I downloaded the newsest version vor my Satellite M40 (PSM40) (1, 70 - WIN<= i="" have="" an="" ati="" grafics="" card)="" and="" extracted="" the="" bios-20070709161345.zip="">
  But there was a surprise:
  Instead of getting the old data structure, as written in the FAQ update Bios
  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. in the folder temporary three subfolders will be generated. "docs", 'Update - 3.5' disc', 'Update - CD - R or CD - RW"

  I get a file only: BIOS of Windows Knockhill10GV170.exe
  Extraction of it I get 8 files:
  -fdbase.img
  -InsydeFlash.exe
  -iscflash.dll
  -iscflash.vxd
  -KPM170. ROM
  -Platform.ini
  -The c:\windows\system32\unicows.dll

  Now my question: How can I create this bootable CD-ROM to update my Bios?

  Just to know: download all the other things are done on my desktop from my laptop is not starting ;)
  I also tried to run the exe in the hope that it will create a floppy disk or a CD-ROM, but it is written "basic cfg address not found."

  Hello

  Update the BIOS there are two ways to do this:
  -Traditional mode (TRAD) and in this case, you need floppy
  -Windows (WIN) and this update can be done under operating system running.

  Update BIOS WIN will work if you run Windows on your laptop satellite. If I understand your assignment well you are trying to do traditional BIOS updated, but using the BIOS to WIN update. On the Toshiba download page, there are two listed BIOS updates and two of them as versions of WIN. This means that you can update the BIOS under operating system only.

  Back to your problem: in the history one thing confuses me when you write: my laptop does not start, but works recovery procedure. Sorry, but if the recovery procedure is working and you will have clean installed OS.

  Be a little more concrete in our laptop does not start. What happen exactly when you press the power button / stop?

• Question about updating Bios for Tecra M5

  I bought the new tecra as M5 on May 12, 2006. I found the following bios updates.

  16/05/06 update BIOS Toshiba 1.50 - TRAD
  16/05/06 update BIOS Toshiba 1.50 - WIN

  Should I go for this upgrade? Please recommend me.

  Hello

  I na? don't know why you want to update the BIOS.
  Your device is fairly new in this case I na? t see any direction update the BIOS.
  Please note that the update of the BIOS is not without risk.
  If you use a bad BIOS or bad BIOS procedure if you may damage the card and these laptop parts are not very cheap.

  I agree with Flo. If your laptop computer is operating properly you shouldn't? t make the updates to the BIOS.

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• Tecra M2 - updated BIOS is not supported

  Hello; I have a Tecra M2 I want to update BIOS.

  I downloaded it from the Toshiba site, specified for this model. But when I unzip in my book, there is a message that says "Bios Update v. 3.2.8. This computer is not supported. But my laptop is a 32-bit computer, and there is nothing strange about this... What is going on?

  I need a help. (It's only a simple update BIOS...)

  Thank you

  J.

  Hello

  The Bios Update v. 3.2.8 error message. This computer is not supported"might appear because the DMI information that contains the name of the laptop and other details of s notebook is wrong.
  In this case the DMI must be updated.

  The other reason why you are not able to update the BIOS, it is this tool called common Modules is not installed on your laptop.
  So install it and check if you can update the BIOS

  Last but not least, the reason could be the preinstalled OS, I hope you are using Win XP in order to update the BIOS

• Update BIOS on Tecra A3X

  I have Vista Business running fine with all this work and I want to update my Bios Version 1.20 at latest.
  Whenever I have to search for updates, the only one that appears is bios - 20070709164832.zip and it says:
  Update the BIOS of 07/09/07
  This Bios update adds functionality to your system.
  When the computer comes on, the BIOS is launched to perform various functions to start.)
  For more detailed updated information, please see the Information update BIOS Toshiba
  Tecra A3X 1, 40 - WIN Toshiba.
  When I run as they explain the link, it gives a stupid error:

  [Error] BIOS update is not supported for operating system. Is an operating system or Service Pack is installed. ?!?!?!

  How can I get close to it.

  Thanks in advance.

  Hello

  I think the problem is that the update of the bios (which is using windows) doesn't work under XP, so won´t you luck because it takes a working XP and common modules installed on your machine.

  Unfortunately there is no other way to update your bios, but in your case it s is NOT necessary update the bios since the new version adds not important functions. So I think that it s not a BIG problem, and if your computer is running well, then ' that one ' and follow the good old "never change a system up and running.

  Welcome them