Pavilion BIOS 7330Z without floppy drive installed

I have HP Pavilion 7330Z and BIOS had bad battery.  New battery in and says disk BIOS not installed.  Unmodified system, just new battery...  Maybe the default settings are bad?  I'm looking for BIOS manufacturer (doesn't show in the Installer) to check why not "auto-detection".  Update BIOS on my other PC, but don ' t know how to load without floppy!  Also try to load XP but the difficulty to start XP installation CD (what is a FN key) or maybe BIOS related?

DocLogic

Removed the cables and to noted model / SN just for later use.  Restored the default settings in the BIOS and it was there "installed".  Maybe dust connection (OLD PC) or BIOS? Now boot from the disk very well!

Tags: HP Desktops

Similar Questions

  • How do I create an ASR without floppy drive?

    is it possible to create an ASR without floppy drive, can I do the computer using a USB key instead?
    as you know all computers are more equipped with floppy drives.
    any help is appreciated.

    The answer to the original question is:

    You do not have.

    If you are using in relying on the built in NT backup to back up your system, it is the primitive technology (because he wants obviously - a floppy disk).  If you have a disaster (even minor), you'll have a big problem.

    If you want to make a backup, it is logical to use modern technology - and it is not integrated with XP.

    There are many popular options for XP Backup and imaging software (s) of third parties.

    A people a popular seem to love East of Acronis.

    With this (free 30 day trial) you save, make a bootable CD or USB bootable (which is modern, huh?) and use disaster.

    They used to have a completely free version - maybe no more - just the trial, then you must buy it, but it is highly respected.

    It is so much more robust than the XP Backup, it's laughable.

    Many other options if you do a little research on Google...

    Here are a few products that PML suggested could be appealing:

    Macrium Reflect
    Paragon backup and restore
    DriveImageXML

  • How to install the raid without floppy drive drivers

    I am building my own computer and I want to run Win XP Pro SP3 and Windows 7 64-bit.  The only reason why I'm eager to keep XP is that several of my old programs that I use, are not compatible with Windows 7.  I know that XP is sometimes "fussy" about installation on SATA disks and requires the F6 install drivers.  The motherboard that I use does not support floppy drive.

    Motherboard.  ASUS P8Z68-V LX

    Processor: INTEL: i5 - 2500K

    Hard drive: Western Digital - Caviar Black 750 GB WD7502AAEX

    I saw a couple of internal and external USB floppy drives, but I'm not sure that they will work the first time during installation.

    Any suggestion?

    Thanks in advance,

    Hi Robert,.

    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

    http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

    Hope the helps of information.

  • The system recovery disk - how do without floppy drive?

    I am trying to create a "system recovery disk" as part of the TOSSHIBA ASSIST (protect and fix the section).

    However, before we proceed, I noted that he was invited to a 'floppy' create a recovery disc but this model without this facility data can be recorded on a CD. I didn't get throughout the procedure and find that I couldn't finish it due to no floppy drive!

    Or otherwise just use the product recovery DVD - Rom supplied with the laptop in case of problem... not sure if this would hold the same data?

    Any help is appreciated!

    Hello Christine

    If you look carefully on this print option (shortcut) it is written to create the CD drivers & tools and in aria info nothing follow description allows to create an external symbol to the top of the caisse de dépôt drivers & tools.

    You use this shortcut, you can simply create Tools & Utilities CD and not the system recovery media. I did a few times without any problem. Equip your optical drive for CD - R, click on this shortcut, click the button BURN.

    All that s!

  • an update of bios nx9010 WITHOUT floppy!

    Hello

    I always have a computer compaq nx9010 laptop.

    Works with XP Professional SP2

    I want to update my bios to KH. F.25

    but as you know, it is difficult to find these days floppies!

    Is there anyway that I can update the BIOS with a usb flahdrive?

    The simplest method is to borrow or buy a USB floppy drive. They are cheap.

    What is the name of your BIOS?

    Best regards
    ERICO

  • Qosmio G30: How to add the driver RAID without floppy drive?

    I'll put win xp tomorrow, as far as I can remember I will be asked to insert a floppy with additional RAID/SCSI drivers - I guess I need some drivers for XP see my RAID stripe.

    I was able to download 'raid-drv-qog20-xp - 1380.zip', but I'm afraid to look if my laptop has a floppy drive... How can I add the driver did not have a floppy drive?

    Hello

    Maybe a stupid comment, but if you can buy Qosmio G30 I presume that you can also get a used floppy disk. I did this a few times with Vista and Qosmio G30 and it works well.

    Check eBay. You will get the drive used for a few euros. Otherway tries to create CDs and if the RAID drive must travel to ODD, I didn't try because I have a FDD, but you can test it on your Qosmio.

  • How to install xp on a partition using cprompt in windows 7 without floppy drive

    I want to install windows XP in one partition of my hard drive and I tried to install using windows XP CD whenever I get to the installation of windows environment a blue screen will come telling me that windows has stopped to prevent the HDD to harm. And I tried all the solutions, I got online not it solved the problem. So I want to perform the installation to the windows command prompt 7 without using floppy disks, all that I need on your part are the steps on how to perform the installation, thank you.

    If your machine comes with Windows 7, then it is likely that the hard drive is SATA.

    XP will not install on SATA drives natively. This is the usual reason for this installation failure.

    You must either change the setting in the BIOS from AHCI to inheritance, or (preferred) to see if your vendor has drivers SATA for XP you offer then for installation via pressing F6 in the first installation of windows. Look for the message on the installation of third-party drivers at the bottom of the window.

  • Pavilion g6 2226tu: 'no hard drive installed' error in material diagnostics UEFI

    My pc is very slow and freezing much n after troubleshooting and consulted technicians on the chat, I went to the recovery. It's everything is OK with recovery but the same problem was there. N all of a sudden today I tried to restart it when it froze, it showed a blue screen with the error 'blackout driver State' it displays information is collected to be sent as a report. After 10 minutes, it ended at 100%. N he tried to restart, but he went to gray white screen after the execution of the repair automatic FIR seconds. After five minutes of waiting, I turned it off n tried to turn on n check with hardware diagnostic uefi. But he could not detect my hard drive of 500g. She appeared no hard drive or hard drive not installed message.
    Now what is it? My hard drive broke down, or it could be another hardware problem?

    He succumbed to a slow death for a long time, but now he is dead and must be replaced. Chances are that it is past the time what data could have been recovered. Sorry for your loss. If you want help replacement and software, we can do.

  • PROTECTED P4000 - update the BIOS without a floppy drive

    Hello

    I have a P4000 protégé who, I believe, was initially purchased without floppy drive. Now that I'm the Win XP operating system upgrade I need to install more memory, and like many other forum members point out it will not work without a BIOS update.

    However the BIOS available on the site is for the installation of Tranditional only and requires a floppy drive (which I did not). Is it possible to obtain a version that runs under Windows, or find another way to start the traditional installation? The site seems to suggest that the installation of Windows is favored, but the software is not provided.

    Thank you.

    Hello Sir

    As much as I know upgrade memory is not dependent on the latest version of the BIOS, and if you use compatible module there are not any problem. Anyway, I'm not 100% sure but I think you can do the BIOS update using the SD card.

    If you have the time and opportunities please try it and let us know if it works.

    By the way: all the updates to the BIOS are on the Toshiba download page and there are no other versions.

    Good bye

  • Satellite A500-17 x - recovery of Bios without a floppy drive

    Hello

    I have a laptop Toshiba Satellite A500-TX.

    My BIOS has been updated via the windows application, but the laptop has hung up and restarted (duh!). Now quite understandable, the laptop starts and doesn't show yet anything on the screen when powered on (I guess that the bios is damaged).

    I found several ways to reflash the bios by using a floppy drive, but the problem is that the laptop is not equipped with a floppy drive.

    Can anyone recommend sort reflash the bios with the floppy drive? Maybe by putting in the shape of the USB as a floppy drive and start? I tried to use the usb reflash via the method of phoenix

    .. .but does not.

    any help would be appreciated!

    + The message was edited: link has been removed - links to other forums not allowed +.

    > My BIOS has been updated via the windows application, but the laptop has hung up and restarted (duh!).
    S is a shame and in my opinion, there is no real alternative for you about contact Toshiba service agent.
    If you're lucky, just the ROM module could be reflashed, but in the worst cases, the motherboard may be dead.

  • Can I move 3.25 floppy drive for HP Pavilion 6730 for HP Pavilion a6157c PC TV?

    6730 a Window 98; 6157 has Vista.  I would like to know the answer before I have start to open office units, I did only to install memory cards.  If the 6157 will accept it physically, I guess I have to download a driver.  Or the 6157 will know where to go and what to do to make it work?

    Here are the specifications of your HP Pavilion a6157c desktop computer and its card mother P5LP-(Leonite2). According to the specification, this model has a connector on the motherboard floppy drive and should support most of the readers of 3.5 "and 5.25" floppy. It seems that there is a space in the CD/DVD drive bays, mount 3.5 "but this space will be"unfinished"once the floppy drive installed. Floppy drivers should be provided automatically by the Windows operating system.

    Please click the White Star of KUDOS to show your appreciation

  • How would complement a full computer backup in windows xp pro without a floppy drive?

    I'm trying to do a full backup of my external hard drive with windows xp pro, but my dell did not come with a floppy drive installed.  It won't let me choose another drive to make the start of the startup disk or reboot disk.

    Most likely your external drive is formatted using FAT32. The maximum value
    size of the file for this file system is 4 GB less than a byte. Reformat your
    external hard drive to NTFS (or use the Convert command):
  • Access to the floppy drive crashes Windows with code: 0X000000F7

    After you have installed the Windows XP updates a week ago (10/22/09 - while others seem to have gotten 0x000000E7 BSOD), my computer hangs when you try to use the floppy drive.  Neighbor has same problem.  However, another neighbour, who did not install the updates since 1 September doesn't have this problem.  We use Windows XP.  I even created a file on the diskette using the player of the 'good' of the neighbor and tried in my computer and the neighbour - always crushed the two machines.  Saw post to that topic or similar problem the other day, but he lost it when I hit the wrong button and cannot find him. Help!

    He is now 10/29 (5:20 pm EDT), and after three days of trying to solve this problem, I'm really frustrated.  Carefully removed eight updates installed since 14/10/2009. I removed them one at a time in reverse order, they were installed (LIFO) and I tried using the floppy after each removal drive, but still get BSOD. My BIOS/CMOS watch floppy drive and my device manager says its working. I even deleted the physically and in the BIOS, floppy drive deleted the contoller of floppy and drivers floppy drive in Device Manager. restarted and other devices working properly.  Reinstalled drive, reset the BIOS, restarted and Windows loaded automatically (as checked in the Device Manager) drivers - always get BSOD when trying to read the disk.

    I would have completely uninstalled CA, except that this user really liked the CA email spam filtering. So, I disabled the antivirus and antispyware of all parties and uninstalled the CA Personal Firewall, and here, the floppy drive has started working. I then installed the new Microsoft Security Essentials to prvide a / v sp and psyware protection.

    kW

  • PE2950 BIOS without a floppy drive update

    On the Dell site support the single package BIOS I can find for the PowerEdge 2950 must be used with a floppy drive - as the 2950 does not come with a floppy drive is there any other way to do it? -something like the tool of USBPrep which is used to provide the pilot during the Win2k3 install maybe?

    Thanks for any info


  • Equium L350 - 10L - Windows install without floppy USB drive

    Hi guys,.

    Recently bought a L350 - 10L and I want to upgrade to Windows XP, Vista. ;-)

    I know that I need the Intel Matrix Storage Manager drivers loaded during the installation of XP, but I don't have a USB floppy drive. I tried to use USB key, but with little success. Is it possible to do this without a USB FDD or having I have to bite the bullet?

    Thanks a lot for your time,.

    Leon rice
    [email protected]

    I agree with kody. On this forum, you can find fantastic son with the description Specifies how to use the program nLite for the installation of Windows XP Home edition. Simply use the advanced search option.

Maybe you are looking for

  • Firefox is suddenly a blank screen for a specific Web site.

    A Web site, I used over the years that I have suddenly can't use Firefox, but I can using Internet Explorer. When I try to go at it in Firefox I get a blank white screen in the browser. I tried all the usual troubleshooting techniques (disabling modu

  • high resolution graphics

    Hi all I created a program in which data (X, Y coordinates) of a file will appear in the XY graph in labview. The problem is that I have 1000 pairs of X, Y coordinates, but the graphic display and the image as an attachment. Now, I want to create a c

  • I have deleated, files accidentally, in my Outlook Express, these files contain all of my folders. What can I retreve them?

    I some how put the folder main to the title of "remove items" and then deleted. I'm afraid I've lost. Help! CHUCK

  • Word processer?

    I don't do a lot very little actually homework on Word pad, I don't need one of these commercial applications? What is the smallest chck spellcheck gram I can dowlad?   seemed that my computer could not swallow the last because he did not or? what th

  • VCS VCS - E, TMS, TMSPE, Jabber/Movi authentication

    Just trying to figure the best way to approach this. I have read the documentation and the best approach seems to get to the VCS VCS-E to Active Directory and the synchronization of the TMS with AD for user account creation. This would avoid the need