Analysis of information for the PXI Module

Similar Questions

• What are the data for the PXI-6552-invalid range

  Hello

  Let say, I put the voltage custom for the PXI-6552 module

  2.4V - high level

  0.6V - low level

  Then, on canal0, I provide a signal of

  sample

  3V 0

  1 3V

  2 VOL. 2

  3-0V

  Thus, the sample 0.1 is high. Example 3 is Low.How sample 2? Please notify. Thanks in advance.

  Hi Engwei,

  Programmed tensions are the levels that you would have to exceed or down before a change of digital status is saved. This means that in your example, coming from a high level of 3V goes to 2V, the Analyzer signals would still record a strong logic. The deadband is actually a way to filter digital noise, common to the majority of the architecture of digital input.

  Best regards
  The Ilana Joshua
  Applications Engineer OR

• Need to model code for the PXI-6230 for NI-VISA driver Assistant

  I want to use the PXI-6230 Linux with NI-VISA for programming level registry.  However, the INF in the mhddk_visa don't contain the PXI-6230 in the file.  I tried to use the wizard, but do not know the model of the hardware code.  Anyone of OR have this info or provide me with an INF numbered on the inside?

  Since you are on Linux, use the command lspci - nn to learn the list the product ID for the PXI-6230. You can restrict the output of the NI PXI/PCI devices using the option d - 1093: after the command.

• Error message "revocation information for the security for this site certificate not available. Do you want? [Yes] [No] [View the certificate]

  For awhile, I got the dialog box with «security alert "revocation information for the security for this site certificate not available.» Do you want? [Yes] [No] [View the certificate] ". » I know that many, if not all, sites are OK because I used them several times in the past.

  I tried different "fixed" found by Google "revocation information" and nothing solves the problem - what is.

  When I try to make various updates, not related to this problem, I can not download updates due to a security problem.

  Suggestions for a computer challenged the user? Thank you.

  Richard

  http://www.brighthub.com/Internet/Security-Privacy/articles/82291.aspx

  read this, see if he can address your question.

• What is the schema for the service module planning part name

  Hi Experts,
  
  I need the info
  
  1. What is the name of the schema for the PSP module
  For example, suppose that we call CPSA as MSC, in similar passion, which is the name given to the SPP.
  
  2. I searched the details in the table in etrm site (in R12.1.1) but it does not exist, can anyone help me to get the details of the table in the PSP?
  
  Thank you for your valuable time.
  
  Good bye
  Badin

  SPP uses the same tables as MSC with additional columns as appropriate. There is therefore no separate scheme for the SPP name.

• OR SHC68-68 for the PXI-6255

  I see that the PXI-6255 DAQ module recommends the SHC68-68-EPM cable and SHC68-68 cable for each connector. My question, is there any detailed diagrams for the SHC68-68 cable pinout? Is it a one to one with the data acquisition module?

  Hey TreyB

  SHC68-68-EPM cables both SHC68-68 have mappings to pin one.  Links to our documentation for pinout for these cables are below:

  The SHC68-68-EPM cable pinout - http://digital.ni.com/public.nsf/allkb/DE2D842E545DE64B86256F78006EAB1A

  The SHC68-68 cable pinout - http://digital.ni.com/public.nsf/allkb/26223F0B830148FD862577770069EBC4

  You will notice the two cables have different internal shielding, as well as twisted pairs different configurations.  The two are armoured noise outside (the prefix "SH" indicates this).  The SHC68-68-EPM cable is optimized for mixed signals on our X and M Series devices that contain analog and digital channels and offers additional internal shielding between digital and analog lines for better signal integrity. The SHC68-68 cable offers only twisted pair and no armour to protect against digital transients because the cable is intended to be used on the single analog connector.

  Kind regards

• What device / gadget will track my GPS and create a log for the card module?

  Hello!

  My camera does not have GPS, and it's a pain to manually find everything if I want to record on the card module.  I recently saw a video saying that I could wear something with me at the same time, and this would create a newspaper that I could download to lightroom and he would marry the two sets of information together.  I don't know what to look for or to start google gadget.  I have a garmin car sat nav, but I think this is a big bulky to carry around (and I only am unaware it would create a newspaper). I would like the price up the cheapest possible option for this see if worth it. Anyone know what kind of things I need to get, or can recommend you a cheap camera.

  Thank you!

  This came up several times recently, while I recorded and released a video to demonstrate:

  https://youtu.be/v2nMcD-t1Ew

  If it helps, please be sure on this issue as "replied," to help others to find in the future.

  HD ++

• iTunes will not find any information for the CD already in the library when reuploading of lossless

  I'm downloading all my CDs to iTunes in the form of files without loss. All of them are currently in my library as mp3s. Why iTunes can't recognize and fill in all the information for me, I have more than 2000 download, many of them are collections of course of b-sides and live concerts. The only time where iTunes fills in the info for me is when I insert a purchased disc and only then, if I'm online. Many of these discs made House also have blankets make home for which the original jpeg files have been lost on an old computer. ITunes definitely has the ability to recognize a disc that reflects the amount of titles and sometimes tracks that already exists in its own library. Am I missing something really obvious and basic here?

  iTunes uses the Gracenote CDDB service to retrieve the title of the CD, the track names, etc.  This is based on matching a "signature" issue of track numbers and durations for a complete disc, not the tracks.  It won't recognize not so CD "home made" unless you used the option to download the metadata for a specific drive of Gracenote.  iTunes has a capacity to recognize the CD that have been imported before, but the data that supports that are stored in one of its preference files, not in the iTunes library and so actually works only if you import on the same PC you used for the previous import.  Since I have while I did use or test this feature, so I'm not 100% sure what limits there - I think it depends on access to metadata for a disc of content before you import it, not after.

  Also, although Gracenote does support the images work that they are not used by iTunes - the function get Album artwork (when it's working properly) gets images on the iTunes Store, based on the correspondence of the values of the artist and Album.  Works of art created by the user, you need to have access to the original files or a backup of them.

• Usability is NOR-SCOPE Soft Front Panel for the PXI-5154?

  I am plans to use the PXI-5154 with his NO-SCOPE Soft Front Panel in a product to test instrumentation. Our past experience, our users need an on-board scope that is easy to use which does not load the CPU. In most cases the scope will be used to check a transitional type of pulses. So, the amplitudes and rise times are essential to ensure compliance with ISO standards. The ability to capture, store and recall traces of reports is important, as well as the ability to perform simple and reproducible follow-up measures. We don't expect our users to have to program the scope; "give me the waveform.

  Does anyone have any comments on the usability of the NOR-SCOPE Soft Front Panel? How to compare with other soft scopes?

  Hello!

  The scope Soft Front Panel is very user friendly and able to load/save waveforms, Load/Save settings and make the scalar measures.  I've attached a screenshot of what the front soft worn looks as well as a link to a help document on the high speed digitizer HELP.  Information on the scope Soft Front Panel lies in this document and can be found under the tab content in the configuration tree (NI - Scope Soft Front Panel help).

  Help of digitizer OR high speed

  http://digital.NI.com/manuals.nsf/WebSearch/2123F564C6DE7B27862574DE006915DE

   

• Current limit for the PXI-4110

  I'm a PXI-4110 with LabWindows programming. I'm trying the current limit. I have an output to 5V with a load resistance of 1 K; This makes the current 5mA. I put the current limit of 2mA to work. When I read the voltage and current is 5V 5mA. Here is my code:

  g_voltageLevel_ch0 = 5.0;

  g_currenLimit_ch0 = 2.0E - 3;

  status = niDCPower_ConfigureOutputFunction (vi_4110_0, channel0Name, NIDCPOWER_VAL_DC_VOLTAGE);
  niDCPower_error_message (vi_4110_0, status, errorMessage);
  status = niDCPower_ConfigureSense (vi_4110_0, channel0Name, NIDCPOWER_VAL_LOCAL);
  niDCPower_error_message (vi_4110_0, status, errorMessage);

  status = niDCPower_ConfigureVoltageLevel (vi_4110_0, channel0Name, g_voltageLevel_ch0);
  niDCPower_error_message (vi_4110_0, status, errorMessage);
  status = niDCPower_ConfigureCurrentLimit (vi_4110_0, channel0Name, NIDCPOWER_VAL_CURRENT_REGULATE, g_currenLimit_ch0);
  niDCPower_error_message (vi_4110_0, status, errorMessage);

  I find that if I put my current limit to channel 0 to 10mA, above the error message disappears. However, I can put the current limit for channels 1 and 2 to 2mA, and I do not have an error message with them. I see nothing in the power supply on a valid range on the current limit. To be clear on what happens if I do this:

  status = niDCPower_ConfigureCurrentLimit (vi_4110_0, channel0Name, NIDCPOWER_VAL_CURRENT_REGULATE, 8-3);

  I get the error "Invalid value for the parameter or property."

  However, if I do this:

  status = niDCPower_ConfigureCurrentLimit (vi_4110_0, channel0Name, NIDCPOWER_VAL_CURRENT_REGULATE, 10th-3);

  I don't get an error.

  Channels 1 and 2 do not have this limit. I went down to 1mA on these channels and no problems.

• How can I display an analog input for the PXI-5105 on LabVIEW?

  Hi all

  I am very very new to LabVIEW and I started to tinker with it. I use the version of LabVIEW 2010 SP1 on Windows 7 OS. I also have the chassis NI SMU-1073 with SMU-6361 and PXI-5105 modules and the chassis is connected to my PC via PCI. I became familiar with the devices and trying to see some analog signals to one of the channels on the PXI-5105 module in a graph in LabVIEW.

  I would appreciate your help.

  Hello Henokview!

  I would like to read through these tutorials to understand the steps of programming of the NOR-SCOPE, NOR-DAQmx. After reading these links below, you will be able to understand how to connect the output of a readfunction to a chart or table.

  DAQmx

  http://www.NI.com/white-paper/5434/en

  OR-SCOPE

  http://www.NI.com/white-paper/3382/en

  Best regards

  Jonas

• configuration of the programming for the cRIO module?

  Is there a way to programmatically access the configuration settings for the modules in use on a cRIO? I seeks to define the type RTD channels on the NI 9216 RTD by screws, not the exporer project module.  In this way, when the system is established and sent to a customer, they would be able to change this without requiring source code.

  Does anyone do this?

  If you use the scan engine to read the entry (not in the FPGA), there is another property to set the RTD type.  In the FPGA, you have just the weight of the LSB and the Offset properties.

  

• MAX self test is not available for the 9237 module

  I had been successfully using a VB.NET program to control the ENET-9237 module to read a load cell.

  I've been using 9.4 DAQmx drivers.

  Things were working well for months...

  Today when I tried to use it, I couldn't communicate with the device.  When I looked in MAX and ran the self-test I got an error indicating that the device is not active.

  I deleted the network device and it still added.  He added just fine and I can see the system state is in place, but now the self-test button is gray.  I can not even use my software to connect to the device.  So the ethenet part seems OK, but I can't get access to the real load cell module.

  This indicates a hardware failure of the 9237 module?  Or is there still something in the software I should try?

  It turns out that it was a software problem.  I moved the material to another computer and automatic test worked fine.

  I've uninstalled and reinstalled the DAQmx v9.4 drivers on the computer with a problem.

  Now everything works as it should.

  Not sure what was wrong with the original installation...

• How to display the information for the account of the past...

  original title: old perental controll reports

  How to view information for a user account on my computer from the past? All I can shoot upwards is from today, when I walk them. I don't need any kind of detailed information just the password of the account and if it has been changed since its creation. It was only created a cpl months however. Please help lol!

  Hi Candy86,

  There is no way to recover old passwords the value on the computer, or the old parental control information.

• Why NOT write the TAG ID information for the associated file? Windows Media Player 12

  I don't like iTunes and WMP12 looks worse.  Here's my problem...

  I edit the media information (sing or film etc...) by changing some information tag - track number, title etc...  Even when I select "Apply media information changes" in the "menu to organize the information of the tag does not change when I watch it by clicking the file and selecting Properties."  What gives?  I won't waste my time making sure that everything is organized and labeled correctly just so that WMP not attached this information in a file.  What worries me is that when I import the songs to another PC then all these information is lost.
  For example, I change the title of the track (you will need to change the title of the track, so WMP it sorts correctly because it does not support CD # in a multiple-CD box set)
  CD1 Title track 1
  CD1 Title track 2
  ...
  CD2 Title track 1
  CD2 Title track 2
  ...
  When I look at the file - nothing changes - UG!

  It sounds just like my question, so yesterday, I created a thread. I understand that it's quite old but thought if someone clicks on this thread, I might as well try and provide a response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-pictures/WMP-12-does-not-apply-media-information-changes/ccf2e2cb-c2f3-4652-bd9f-fed3b6d8eb71

  Organize > options > privacy > (uncheck) Update music files by retrieving the news media on the internet

  I hope this helps!