Current limit for the PXI-4110

Similar Questions

• OR DC Soft Front Panel, minorbug, small bug with the PXI-4110

  Hello

  The NI DC Soft Front Panel V14.0, with the PXI-4110, scrolling to negative tension, works as expected to-10V, but then returns to 0. If we change from - 1V procedure, it goes...-8-9,-10, -1, -2... instead of-8-9,-10, -11, -12...

  Everything about her, a simple thing that I miss is a switch for all three voltages.

  (Also, IMO, it would be logical for negative tensions with the arrow pointing down, not more).

  My 2 c

  Hello Janaf,

  I completely agree with two of your statements, I tabled a report of corrective measures that you can monitor in the next versions of DCPower to see if this is fixed with the FPS. CAR number: 512257

  I've added notes that only manual insertion of numbers - less than 10 works and that it was not logical to use arrow increment or upward arrow to reduce the output voltage.

• Need to model code for the PXI-6230 for NI-VISA driver Assistant

  I want to use the PXI-6230 Linux with NI-VISA for programming level registry.  However, the INF in the mhddk_visa don't contain the PXI-6230 in the file.  I tried to use the wizard, but do not know the model of the hardware code.  Anyone of OR have this info or provide me with an INF numbered on the inside?

  Since you are on Linux, use the command lspci - nn to learn the list the product ID for the PXI-6230. You can restrict the output of the NI PXI/PCI devices using the option d - 1093: after the command.

• What are the data for the PXI-6552-invalid range

  Hello

  Let say, I put the voltage custom for the PXI-6552 module

  2.4V - high level

  0.6V - low level

  Then, on canal0, I provide a signal of

  sample

  3V 0

  1 3V

  2 VOL. 2

  3-0V

  Thus, the sample 0.1 is high. Example 3 is Low.How sample 2? Please notify. Thanks in advance.

  Hi Engwei,

  Programmed tensions are the levels that you would have to exceed or down before a change of digital status is saved. This means that in your example, coming from a high level of 3V goes to 2V, the Analyzer signals would still record a strong logic. The deadband is actually a way to filter digital noise, common to the majority of the architecture of digital input.

  Best regards
  The Ilana Joshua
  Applications Engineer OR

• How can I use my current windows7 for the new portable computer

  Original title:

  Windows 7

  Hello

  I bought the original windows7 and I currently use it in my laptop. I recently bought a new laptop and now I want this original windows 7 on my new laptop.

  How can I use my current windows7 for the new portable computer

  Please notify

  Concerning

  Run you where you are unable to activate code product. It gives you a list of phone numbers for Microsoft to ring.

• The "64K limit for the total size of all the values in a registry key" rule - not more valid?

  http://support.Microsoft.com/kb/256986
  - more information -> Description of the register article, it is said:

  Note There is a 64K limit for the total size of all values of a key.

  I don't see that this rule can be valid any longer?

  In my Windows 7 SP1 x 64, I have at least 15 keys with values that add up to more than 65 535 bytes.
  In fact, I have more than 15 values (strings, binary and multiple channels) which, by themselves, have some sizes larger than 65 535 bytes.

  Here are a few examples.

  Native Instruments Kontakt 5 installation;
  [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\B354255567BB3E5479D39FE554E87D08\Features]
  -This key contains 91 string values, where 90 are under 250 bytes, but the last of them. "FE923650A" has a length of 67 401 bytes of data.

  Autodesk 3ds Max Design 2011 installation;
  [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\FFECC85A69B39040E99BEA59BF78957B\Features]
  -This key contains 14 values of string, ranging from 1 (the 'P' value) byte to 75 426 bytes (value "max7"), bringing the total size of 116 944 bytes.

  Installation of Windows 7 by default.
  [HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\AppCompatCache]
  -This key contains a binary value of monkey 'AppCompatCache' that has a length of 259 768 bytes of data.

  Another installation of Windows 7 by default;
  [HKLM NT\CurrentVersion\Perflib\CurrentLanguage]
  -This key contains 2 channels multiple values: 'Meter' (87 950 bytes) and 'Help' (418 345 bytes), a total of 506 295 bytes for this key.

  Finally, once again Windows 7 installation by default.
  [HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage2]
  -This key contains 3 DWORD and 5 binary values with the value "ProgramsCache" being the most important of all with its 795 404 bytes
  either a sum of 807 639 bytes for this key.

  Hello

  Check this box:

  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/thread/84944bfe-4bf5-47cd-93ac-4d09076fcd40

  This problem can also be published on MSDN Forum.

• can I benefit from the agreement of the student upgrade my current plan for the $20.00 per month for everything since I was a student

  can I benefit from the agreement of the student upgrade my current plan for the $20.00 per month for everything since I was a student

  Adobe in education... Start here https://creative.adobe.com/join/edu

  Educational https://creative.adobe.com/plans?plan=edu

  FAQ https://helpx.adobe.com/x-productkb/policy-pricing/education-faq.html

  When you purchase a subscription to education, the terms you "click to accept" should be clear about the first/last years

  -Intro price http://forums.adobe.com/thread/1448933?tstart=0 one can help

  http://www.Adobe.com/products/creativecloud/students.edu.html

  http://www.Adobe.com/education/students/student-eligibility-Guide.edu.html

  Redemption Code https://creative.adobe.com/educard

  Proof of ID http://www.adobe.com/store/au_edu/academic_id.html

• What is the limit for the creation of a primary key?

  Hi friends I have an another question... .Please help me...
  
  
  What is the limit for the creation of a primary key?
  
  
  Thank you

  I think that its 32

  Yes from the doc

  Primary and unique keys because composites are limited to 32 columns, a composite foreign key is also limited to 32 columns.

  Published by: Karthick_Arp on January 13, 2010 22:04

• Accuracy of the PXI-4110 and aid for the supply of the sweep of the voltage-2, 5V to 2, 5V

  Hello

  I want to know about the accuracy of PXI 4110 DC power. I use 4110 PXI to apply a voltage sweep-2, 5V to 2, 5V with a 0, 5V step using Labview, how can I do?

  Hi Khan,

  After reading my post, I realized I'd probably be a bit clearer on that last paragraph...

  Available for PXI-4110 voltage ranges are different for each channel, as shown in the first page of the specifications:

  CH0: 0 to + 6V

  CH1: 0 to + 20 v

  CH2: 0 - 20V

  So to create a sweep from-2.5 to 2.5 V, you will need to use multiple channels. You would use Ch2 to sweep from-2.5 to 0V. Then you can use Ch0 and Ch1 (Ch0 would be better since you'll have better accuracy) to sweep from 0 to + 2, 5V. There is a good example, called "NOR-DCPower channel in software timing Sweep (curve) .vi tension" which does almost exactly what you are looking for.

  I hope that clarifies the it!

  Chris G

• is that any limits the current entry for the digital I/o?

  Hi all

  I wonder if there is no limit on the input to the digital I/o port. I have a device about 0.2 volt voltage outputing and the manual says the maximum sink current is 25mA. I connect this signal to a DI entry in my 6711 map. I wonder if the current is too large for the entrance of DI or the PFI?

  As we have already mentioned, there is no current flowing on the device in low level mode.

  The current specifications mentioned see the maximum current that can be managed by the device in low level mode.

  I hope not to confuse you more than necessary. On a row of data to the TTL level, nothing flowing from the device to the main circuit in level mode high current. In low mode, there is flowing in the main circuit in the current device. This current is inherently limited by the circuit.

  So, if you have a file specification of 25mA max. of the peripheral device in low level mode, it will never sink too much power from the main circuit. You can connect two devices without any risk. The maximum current is just specified in case you manage more current with the device, a led or a relay for example. In this case, the charge current must be limited, so that you do not damage the device. But - as mentioned - this is NOT the case in your application.

• IVI Configuration with the PXI-4110 in TestStand

  Hi all

  Implementation:

  PXI-1033 connected through MXI to a PC running Windows 7. LabVIEW 2014. TestStand 2014 (32 bit). DMM PXI-4110 food and PXI-4070.

  In MAX, I can open two soft signs and two control units and they work great.  In LabVIEW, I can control the two cards as well.

  MAX I put in place a pilot and a logical name for my DMM. This unit works very well within TestStand using one-step IVI DMM.

  I then configure the 4110 to the MAX with a pilot of the IVI and logical name. Here are my settings:

  Name: ni4410_PS

  Material: Immobilization of additional hardware and select the PS. This is checked, any other assets are checked.

  Software module: NOR-DCPower, 4110 is listed as a device supported.

  Virtual names: It is where I am confused, under the name of physics there are four options that arise (0, 1, 2 and 3). This power has only 3 exits, so I'm not sure why four rise. I've done 4 virtual names, one for each of the options. I named the ch0, ch1, ch2 and ch3 respectively.

  When I put a power of IVI step TestStand, everything seems to work. I open the configuration window and set my values for each channel. If I try to validate the configuration by deselecting simulate and click init I do not receive an error.  As soon as I click on 'Set up' or 'Show Soft Front Panel', I get the following error:

  "IVI operation failed set to the name of lgical"OR PS 1'. Details: Possibility of Extention not taken care of by instrument driver. (Base) (- 30717) »

  Any information would be appreciated.  I tried to play with it for a few hours yesterday and a few colleagues trying to help.  We are all under the assumption that it should work.

  Thank you!!

  Jesse

  Hi jesserzamora,

  Did you see this link: http://digital.ni.com/public.nsf/allkb/331F2717DBCD1F858625758200745773?OpenDocument

  It addresses a failure similar to the step of IVI Power Supply of TestStand.

• OR SHC68-68 for the PXI-6255

  I see that the PXI-6255 DAQ module recommends the SHC68-68-EPM cable and SHC68-68 cable for each connector. My question, is there any detailed diagrams for the SHC68-68 cable pinout? Is it a one to one with the data acquisition module?

  Hey TreyB

  SHC68-68-EPM cables both SHC68-68 have mappings to pin one.  Links to our documentation for pinout for these cables are below:

  The SHC68-68-EPM cable pinout - http://digital.ni.com/public.nsf/allkb/DE2D842E545DE64B86256F78006EAB1A

  The SHC68-68 cable pinout - http://digital.ni.com/public.nsf/allkb/26223F0B830148FD862577770069EBC4

  You will notice the two cables have different internal shielding, as well as twisted pairs different configurations.  The two are armoured noise outside (the prefix "SH" indicates this).  The SHC68-68-EPM cable is optimized for mixed signals on our X and M Series devices that contain analog and digital channels and offers additional internal shielding between digital and analog lines for better signal integrity. The SHC68-68 cable offers only twisted pair and no armour to protect against digital transients because the cable is intended to be used on the single analog connector.

  Kind regards

• Analysis of information for the PXI Module

  Hello

  I intend to develop a labview program that is analysis drawn from all the module present PXI chassis (such as calibration, description of the add-on dates, etc...). Need some advice which VI Labview is capable of scanning over the disclosures in which the output is "chain" so that I can

  manipulate the program labview himself.  As a search for VI, one option that I see is the 'MAX Generate Report', but the results are HTML or xml (as well as my PXI

  crashes when I use this feature).

  Appreciate any inputs on this.

  Thank you

  Versil1

  Hi Versil1,

  I advise to use niModInst, DAQmx and DAQmx system device nodes. Examples of these functions can be found here:

  niModInst: the device name of query by programming or other information using the API OR-ModInst http://decibel.ni.com/content/docs/DOC-7454

  Device node and DAQmx system: programmatically obtain product DAQ device http://decibel.ni.com/content/docs/DOC-3716 names

  For the outputs that are not in the string format (i.e. DevNames), you can use the flatten the string function to convert them to strings.

  Kind regards

• Current limit for analog output on USB-6211-OEM

  The current output drive listed in the specifications of this card is of +/-2 my. What happens when you try to go beyond that? Is there damage to the card or is it simply rail out around 2mA. For example, if I connect a 1000 ohm load. I'm okay, if I have the output up to 2V (= 2mA), but what happens when I exit 3V with the same 1000 ohm load?

  Thank you.

  Protection of the overdrive is 2.4 mA, which means that you can ride this current without damaging the card, but a current of approximately 2 mA, tension is more guaranteed to be compliant to the specifications.

  Kind regards

  Brian P

• Character limit for the entry of short answer?

  Cap 9.

  I use SCORM 1.2, which imposes a limit of 255 characters for the text input, however, I can't find a way to limit the entry of text box for the quiz/short answer, which means that the people of entry much more of 255 characters and submit their responses, but unbeknownst to them, the answer is off.

  Is it possible to apply a limit of characters for pre-built Answer questionnaires/Short models?

  Thank you

  You can limit the number of characters entered in a text entry area.  The maximum number of characters that will now be accepted by a BER 9 Captivate is 150 characters.  But you can set the number being less than that.

  You can certainly include an area for text input in a quiz, but it's usually only when you set the Validation option on WE so that the text of the learner is assessed to see if it matched to a correct answer.  In your case it is not necessary for a correct answer if you want just your comments.  If you do not set a Validation we then report to the Quiz option is gray.

  Developers wishing to receive feedback courses accepted by the LMS often use the value short answer question survey instead of rated.  It seems that some LMS then saves the text entered.

  If it's somewhat a catch-22.  I still believe that your best option is to simply tell users NOT to go more than a few sentences of comments.