anchor points

Similar Questions

• Can I set a new default Anchor Point?

  Hey guys,.

  I want to set the anchor point to the top left corner on default. So when I drag a clip in the scenario its anchor point is automatically set to 0, 0. Is this possible and if so, how?

  In this case make a preset position with value 0,0 anchor.

  Scale set of keyframes over time for the zoom.

  Defined in a preset.

• Merge multiple paths to a single anchor point

  Hello friends,

  I want to create a perspective of illustrator grid to use with other software.

  I would like to know if it is possible to merge several paths to an anchor point unique to a single point perspective grid that can be easily changed by moving the anchor point in the Middle, as in the picture below.

  Imgur: the most impressive pictures on the Internet

  An anchor may reach only 2 segments of track. Your image must at least consist of 2, if it is not not 4 paths. But you can select multiple anchor points (not a path) and use the Panel line up to get them exactly on the same position. Later if you want to draw a rectangle with the direct selection above them, move them around and move these selected elements.

• Anchor point does not exactly where I put it, but in the middle of the image

  I create the page muse 'contacts' and insert some text and then point anchor and under a photo. My index page, I link to my anchor point 1. the result is a photo half... I don't know what the problem

  The page is probably too short. The bottom of the page reached the bottom of the browser window, until the anchor is able to reach the top of the window.

• ATTRACT THE ADOBE ILLUSTRATOR CC PROBLEM (IN MILLIONS OF ANCHOR POINTS)

  Hey guys,.

  I paint mainly hand free images on draw for transfer on CC Illustrator to create T-shirts on my Mac book Pro.

  They yield without problems, but when they come through here is like millions of anchor points (which literally planting my Mac even if its brand new with very good specifications) and loads of layers.

  Also, when I change outline/background color to match my color of T-Shirt Basic, he treats as if there are two separate features around the line.

  Is anyway to turn it into a normal vector without so many anchor points (excluding the rounded tool) more as if she was drawn on Illustrator?

  Thank you

  Laurence

  (Sorry for the bad description, I am new to the draw and Illustrator)

  Hi Laurence,.

  Even if it's a conversation, I had with a number of people who use a draw... Brushstrokes in the draw are as a form of task of Illustrator and it is currently not possible to obtain a simple/single track in the middle of the race... and I don't know if changing this algorithm of drawing is even considered at this stage.

  I know that to redraw the strokes in Illustrator CC, is an excruciatingly long process and I'll pass your comments along to the product team.

  There are a lot of people on the forums who have raised the same issue and I would like there was more I could do to help. I hope it is useful to at least understand what's happening.

  Sue.

• How set the anchor point of the composition (no layer)

  Hi people,

  I have a composition very long and skinny.  In a far corner of the comp, I'm turning a layer on the x axis, but I want to turn backward in relationship to itself, and NOT with regard to the focus of the long and lean model.  I changed the anchor point of the layer itself to be the center of the layer, but it always tilted toward the center of the model:

  

  How can I change the anchor point of the comp itself?  I tried to change the position of 'anchor' in the grid 3 x 3 in the composition settings panel, but that seemed to have no effect.  Thank you!

  mbirame wrote:

  It makes sense, but it surprises me. If the point of leakage of a 3D object will always be in the center of the composition?

  No.... Just like in real life, point of view is controlled by the position of the camera, the angle of view is controlled by the focal length, and the center of the view is always on an infinite perpendicular line between the center of the plan of the film (point of interest). The human eye is not tilt shift, like the cameras was discovered and no not the camera AE (or no matter what camera I've ever seen in a 3D application, so you can not control the perspective by winning the film plane or by moving the center of the lens as you can do with a camera or a tilt shift lens.

  The vanishing point is where the parallel lines converge and depends on the angle of parallel lines to the camera.

  I hope that makes sense.

  Here's the thing about nesting more small compositions in a larger. If you put 3D layers in your nested compositions and condense the transformations, then the camera in the main computer will interact with the 3D layers in nested compositions. If you do not condense the transformations there will be no change in perspective as the camera moves into the main computer. If you do not condense the transformations and you make the 3D before comps will organize just flat cards in the main 3D model space.

  One last thing. Only the Active camera view has perspective. All custom views are orthogonal - no perspective. This

  It will take a minute, but you should be able to wrap your head around that. Here is a demonstration of model how global collapse of transformations. Feel free to play with it. Collapse Transformations.aep (Note: your browser may add an extension .txt to the app file - just delete it)

  

• Set the grouping on the text layer anchor point?

  Hi all

  I am not able to change the anchor point of grouping in extendscript.  This doesn't seem to work:

  textAnchorPointGrouping = curLayers[i].property("text").property("More Options").property("Anchor Point Grouping");
  textAnchorPointGrouping.setValue("Character");
  

  Any thoughts on what I'm missing?  Can't seem to find how do script Guide

  Wow, ha, just figured it out after playing with him for a long time.

  1 = character

  Word = 2

  line = 3, so the syntax is:

  1. textAnchorPointGrouping = curLayers [i].property("text") ("More Options") .property .property ("anchor Point grouping" "");
  2. textAnchorPointGrouping.setValue (1);

• Anchor points have disappeared

  Now, before someone tells you, go to view-> Show Edges, it is not that. A strange thing happened where if I have my black arrow tool selected anchor points do not appear unless I have hold the control button to activate the white arrow tool (or select the white arrow tool). My bounding box is there to show that I have selected an object, but it is not highlight the object and anchor points. Curiously, if I click Hide the bounding box anchor points reappear, but now if I'm trying to select groups of objects, the bounding box is gone and so I have to select again see the bounding box. Someone has an idea of what's going on here?

  It is an 'upgrade' in the new version for a cleaner interface.

  Disappearance of anchor Points

• Align to the left the text anchor point in After Effect

  Hello. Sorry if this question was very noovy, but I need left align multiple layers of text. So, I want to put my on board left the text anchor point. Because I need to be able to change the text and get the same effect, I would like to place the anchor point on the left edge by using an expression.
  

  I used something like
  

  x = 0;
  

  Y = this.sourceRectAt () .height/2;
  

  [X, Y]
  

  However, small, apparently random offset is throw me off. How can I align my text anchor point to the left edge?

  Thanks in advance!

  Yes... I created a font that has 0 left/right bearings, and it worked perfectly.

• problem with ioining several anchor points

  How can I more simple join a cloud of anchors to a path?

  I tried a few options of access road and joins, but none has managed to reach individual anchor points...

  Please help!

  See you soon

  

  These are all segments of open path?

  In this case try the 'Join reasonably' script of mustapha page: Scripts for Adobe Illustrator CS

  But you must select the same paths before applying the script via Select > same or the magic wand tool

• Anchor point

  Good so I started to learn Ae this week. I did a file I that I imported into Ae with layers to animate. Its a clock so I need to change the anchor points of the second and the minute hand, with also the oscillating pendulum since it is a grandfather clock. Now it's not a problem until I need to scale, it uses the new anchor of these objects instead of the parent who is at the center of the computer when they are imported. Is there an easy way to solve this problem and it is me all the layers even across all three as anchor points for, I changed?

  To show you: first peak is without scale, is second after scale (they scale very well but now are off because of the anchor points, I needed for rotation)

  

  

  Create a Null object and the (relative) link of all layers with it, then the Null scall

• 3D - too many anchor points?

  Hello

  I'm new to Illustrator and attempt to use the 3D tool to create simple underwater maps. I draw a view birds eye in the shape of the reef on my iPad Pro and then export it as a SWG to Illustrator. From there on, I use the 3D tool. For my first file worked great, but with the second file he cut a large part in the subject, despite the fact that there is only one way. I wonder if it's because there are so many anchor points? See attached screenshot.

  
  Can someone tell how can I avoid this or repair?

  Thank you very much

  Sarah

  

  It can also be something else, but whatever happens, I would certainly reduce the number of first anchor points.

  Object > path > simplify.

  If the error persists, please tell us, so we could get the other issues.

• How to add an anchor point on the exact spot that it overlaps with another line?

  See the screenshot, I added.

  I have tried everything just by adding one with smart guides on, then adding an anchor point, whenever I saw 'intersect', then remove anchor point that remains but then I get another situation (see screenshot 2). How can I make them connect properly?

  Kind regards

  Victor

  

  

  Select both and use the tool shapebuilder.

  Press and hold Alt then delete what you don't need:

  How to use form builder | Adobe Illustrator CC tutorials

• I can edit the Bézier handles symmetrically with Anchor Point tool?

  In CC when using the pen tool on PC, I like the way that you press Alt and Anchor Point tool allows to modify Anchor Points and paths on the fly. But to convert an anchor point in the curve, the Bézier handles soar symmetrically compared to start but after letting go, I can only go back and modify the handles independently using this tool who loses the symmetry and therefore the sweetness in the anchor point

  Is it possible to edit the Bézier handles symmetrically using this tool after the initial conversion of the corner anchor to smooth?

  Thank you

  N °

  If you want to change the handles symmetrically, so that they are uninterrupted - direct face-to-face and the same length, you have to start over - drag - click on the anchor with the anchor Point tool.

  I don't think you should use the Alt key

  After that, assuming that both handles are uninterrupted, you can click drag with the direct Selection (white arrow) tool on the end of handles and the curve will remain smooth as handles to remain intact.

  so in short, use the direct Selection tool (press and hold Ctrl), if you want to change unilaterally, without breaking the 2 handles.

  Can be useful for checking-

  Edit > preferences > display the selection anchor > see Managing when several anchor points are selected

• You use the stylus to remove an anchor point or create a curve?

  When you place the pen tool on the anchor points on an open path, it shows a sign-, but when I click on the anchor does not remove the anchor, and if I click on the anchor a second time turns into triangle symbol to create a curve.

  1. Why does sometimes delete anchor point when the - sign appears and I click an anchor point, while other times it does not work?

  2. What is the shortcut to go directly to the side of the triangle without having to double click on an anchor?

  Thank you.

  Are you referring to the endpoints of a path?

  In this case it must be

  -use the subtraction-anchor-tool or

  -Select a point with the direct Selection tool, and then press the delete key