Animate terrible edge performance...

Similar Questions

• How to animate the edge activate on click in muse

  How to animate the edge activate on click in muse?

  Not an expert here, but this article should provide you with some guidance.

  Control of the animated elements > adding interactivity based in Adobe Edge animate

• Position of the element Animate incorrect edge in Chrome

  I've created an animation on board animate that worked well in the beginning and now is not rendered properly in Chrome. The animation works well, the problem is in the position of the element. Is - it maybe a bug on board animate? For any idea or suggestion would be greatly appreciated.

  Rendering of Firefox, opera and IE 11.

  

  Rendering of chrome.

  

  You have applied the new update that came out today - get your update to animate the edge, addressing problems of compatibility with Chrome 36 ' Adobe Edge leading Team Blog »

  Darrell

• Advantage (Preview), Edge code animate and edge inspect used to install

  I can not get Code Edge (Preview), Edge animate and edge inspect for install on my computer.  Am I missing something?

  Does not work on Windows XP

  http://HTML.Adobe.com/edge/animate/tech-specs.html

  This applies to you?

• T430 - Terrible nvidia performance

  I just got a 17 core, 8 GB T430 works Wind 7 Pro 4000 HD Intel and nvidia NVS 5400 M. There seems to be a number of problems with the nvidia card.

  1. I can't get anything to use nvidia unless I force it in the BIOS.
  2. When I force it, performance is about 1/10th of the Intel card. The 'Saurebraten' game falls to 200 FPS in ~ 20 fps.
  3. "Run with GPU" is always greyed out.
  4. When I add 'Sauerbraten' in the control panel nvidia and say he must use NVIDIA, the game always reports that it uses Intel.

  I tried similar tests with Kubuntu 13.10 using Bumblee and the behavior is the same.

  So in summary: I can't use Optimus and when it's running nvidia the performance is terrible. All tests was performed using the computer screen laptop while that connected to the power supply.

  Can someone guide me for diagnosis/difficulty? I was full support of Lenovo and can't seem to find any information.

  Found the problem. The laptop came with me to have some very strange power settings. 'Seat of the aircraft' had been established and this severely limited the nvidia card. Once I disabled that, things were good.

  How this impact also Kubuntu, I'm not sure. I'm just happy that the situation is now resolved.

• What is the difference between CC animate and edge lead CC?

  What are the similarities and differences between these two products? In which specific contexts, for what specific reasons, you would choose one over the other? Would have a need to learn and use, at the same time? Animate Dashboard will be gradually, or is it still something unique to offer that animate CC didn't?

  It's a bit like asking what the difference is between Java and JavaScript. They are completely different programs that have similar uses.

  Animate edge is is no longer being developed: update on the tools and Advanced Services ' Adobe Edge leading Team Blog »

  Edge works by moving individual HTML entities around the screen.

  Animate CC is the next version of Flash CC, with a change of name very confusing and poorly considered applied. Flash/Animate CC works (in canvas mode) by rendering to a bitmap canvas object.

• Update Animate 2015 edge

  When will release the next version of edge animate and what new features will be included?

  Hi Leo,

  The announcement on the updates can be done by the project management team. They do when the product is ready for release and is announced on the edge blog animate and on this forum as well.

  Thank you

  Preran

• "animate the edge - exception error" (type of red, red area) and the application does not open

  Hello

  
  

  I hope that someone can help me... I'm not sure how to explain the situation, but when I try to open Adobe Edge animate, this error box "edge animate - Exception ' if poster, (see below), then the program closes unexpectedly. I can't say the words that it has the red type on a red background.

  I uninstalled the program and reinstalled and the same error.

  I'm new on this app, so I have no idea as to how to solve this problem.

  I hope someone can help me, I know it's short so feel free to ask me any other questions.

  Thank you in advance,

  Tom

  

  Hi Tom

  It's very weird and not reproducible. What is the entire message that you get on the crash? We look at it. Even if we don't exactly understand the problem, can you please try to delete the preferences and restart the application. (Preferences are found in /users/animate Library/Preferences/Adobe/Edge). Please delete the Directory Board animate in the path and start the application. If the application still crashes, please send us the full journal report you get. We will try to solve the problem as soon as POSSIBLE.

  Thank you for your patience

  Dieudonné

• Animate the edge - does not work why?

  Hi all

  I just downloaded edge lead and that's what I have.

  some sort of error.

  someone knows what's the problem?

  thanx

  

  You can download TCPView from this link - TCPView for Windows. Launch of TCPView, make sure that you are running from edge host. It will show you a list of all processes and ports in use. Sorting on the port number and check if 54321 is listed. If it is listed, then try to close the program that is using the port and restart edge animate to see if it works.

  DIA-

• Image of Animate poster edge hiding animation

  Hi all

  I create an animation using edge animate and imported in InDesign for use with DPS. I used the method of importing .oam. However, the image of the poster I created beachfront animate the animation cache when you view the folio in Adobe Content Viewer. The only way to go beyond the image of the poster is to click on it, how he brings the animation in the display. However, the animation is already playing in the background.

  Someone at - he found a way to solve this problem? I can't figure out how to remove the image of the post once set within edge animate.

  Thank you

  Jerry

  I had set it to "allow a user interaction" which is what was causing the problem. I have deselected that option and choose 'auto play '. Now I can see the animation.

  The poster image still appears for a brief second, then disappears when the animation begins. Only, I intend to distribute with iOS, so I don't think I need the image of the poster at all.

  Thank you

  Jerry

• Animate the edge - how to steal in hover and active effect in CSS?

  Hello

  I face some problem by adding the hover/active effect in css.

  To get examples-, I have two button text - (home & about us)

  I would like to add that, when I hover over the button, it will show underscore, features when click on it, it will be active with different colors

  and when I click on the button active anther button should be Michael & clicked button should be active.

  Help, please...

  Concerning

  E. Kumar Muduli

  Hello

  The best way to achieve this would be to specify properties with code, because there is no transition animation you are looking for.

  Start by opening edge animate and make two text fields at the 'home' and 'about '. Then name the text fields with a

  ID by changing the name in the properties panel. Click in the top text box and change the name

  ID to something that is easy to identify. I chose "homeText":

  

  Repeat this step for the "comments" text field. Then, click the Actions open next to your House text field object in the timeline area:

  

  Choose 'click' in the popup menu that appears:

  

  Copy and paste this code below (it's the code style CSS color property). Be sure to change 'homeText"that you chose to call the House text field object:

  SYM. $("homeText") .css ("color", "#650097");

  SYM. $("aboutText") .css ("color", "#000");

  

  In this example, I made the #650097 Home-link active color (purple). This code shows on board animate to the purple Home link and to make sure that the link is black by default (#000).

  Then click on the button "+" in the Actions window open. This time, choose "mouseover". This is where we will add the code for the feature of sensitives.

  

  Copy and paste the following code in the code window:

  SYM. $("homeText") .css ("text-decoration", "underline");

  Finally, press the "+" to add an event in addition to the buton. This time, choose "mouseout/mouseouthandler()". This code will add the button functionality to make the underlining disappears once the user is no longer hovering above it. Copy and past the following code in the window code:

  SYM. $("homeText") .css ("text-decoration', 'none'");

  Repeat these steps for the aboutText button. The code for the about button is below.

  Click on:

  SYM. $("aboutText") .css ("color", "#650097");

  SYM. $("homeText") .css ("color", "#000");

  MouseOver:

  SYM. $("aboutText") .css ("text-decoration", "underline");

  Mouseout/mouseouthandler():

  SYM. $("aboutText") .css ("text-decoration', 'none'");

  If you need further clarification / statement, let me know. I hope this helps!

• Animate the edge - sets the resizable text animated along (it is useful for all devices)

  Hello

  I built a walk produced through demo using edge animate, in this demo I put stage the percentage, but when I see my ipad demo, the text remains its original size.

  Please help me, how the text according to my persentage of scene.

  Concerning

  E. Ku Muduli

  If you want that two separate text with two sizes of separate text boxes, your code would look like this:

  set the originals

  var originalWinWidth = $(window) () .width;

  set the font size as original

  var originalFontSize = 20;

  var headingFontSize = 30;

  Set the ratio of change, each change of size

  var ratioOfChange = 50;

  set the font size using jquery

  SYM. $("conteneur") .css ("font size", originalFontSize);

  SYM. $("rubrique") .css ("font size", headingFontSize);

  $(window) .resize (function)

  {

  get the width and height as the window resizes

  winWidth var = $(window) () .width;

  get the width difference

  var winWidth = widthDiff - originalWinWidth;

  check if the window is larger or smaller than the original

  If (widthDiff > 0)

  {

  our window is larger than the original so to increase the font size

  var pixelsToIncrease = Math.round(widthDiff / ratioOfChange);

  calculate the new font size

  var newFontSize = originalFontSize + pixelsToIncrease;

  var newHeadingFontSize = headingFontSize + pixelsToIncrease;

  new font size Set

  SYM. $("conteneur") .css ("font size", newFontSize);

  SYM. $("rubrique") .css ("font size", newHeadingFontSize);

  }

  on the other

  {

  our window is smaller that the original so decrease the font size

  var pixelsToDecrease = Math.round (Math.abs (widthDiff) / ratioOfChange);

  calculate the new font size

  var newFontSize = originalFontSize - pixelsToDecrease;

  var newHeadingFontSize = headingFontSize - pixelsToDecrease;

  Set the new font size

  SYM. $("conteneur") .css ("font size", newFontSize);

  SYM. $("rubrique") .css ("font size", newHeadingFontSize);

  }

  })

• On 15-e072sa terrible wireless performance

  Hello
  
  My girlfriend recently bought a computer laptop 15-e072sa and it would not correctly work with our VMDG480 router more than 3 meters from the hotel. The problem is out of the box. Specifically, the router seems to be connected but internet does not work. So far, I have tried

  -disable anti-virus software

  -try different browsers (Chrome and IE)

  -Remove and reinstall the wireless drivers

  -affecting only g and b only wireless card

  -downgraded to windows 7 to see if the operating system was at fault

  -restore the router to factory settings and recreate the network with a new ssid

  -reinstalled windows 8 and used live the latest realtek drivers

  -changed the channel on the Router 1 to 6 to 11 and followed with inSSIDer. Whenever the wireless signal was about-80 to-60 dBm. When I walked into the next room the signal remained around the same (or even increased), however, internet no longer works and ping the router shows the time of 2000ms

  When channel 11, no other network appear on the same channel in the room the further. The link score (overall performance based on the intensity of the signal and interference from other networks) on inSSIDer is 100 - highest, it was.

  None of the above worked. I am at my wits end here and we cannot return the laptop as it has been used. It's brand new and effectively useless because it can be used only in one piece.

  Anyone have any suggestions for additional drivers or wireless settings I should try?

  Everyone knows about this problem?

  I can't try a differernt currently router as it must have a built-in cable modem. However, the wireless signal is picked up from the well and the internet works perfectly on other devices in the House - a HPG61 with an Atheros AR9285, a Samsung Galaxy and a HTC Desire.

  Any help would be appreciated.

  Thank you

  Chris

  Right. I didn't need the recovery disc, but I ordered them anyway. They agreed to talk to me on the phone and we worked on the air is not properly connected to the wireless card. You can check this by unscrewing and lifting the Panel of service on the underside of the laptop.

  http://h30434.www3.HP.com/T5/image/serverpage/image-ID/49003iC0088B41566473B8/image-size/original?v=MPBL-1&PX=-1

  Thank you for a faulty product and weeks of time lost, HP.

• Integration of HTML or widgets in the project animate Adobe Edge

  Hello

  I just discovered Edge and I think it's amazing, that finally the 'new' web standards are put in the hands of designers again!

  My question is what I designed an online application based on the web using the amazing features at the edge, what I have to do now is for example to add a weather widget or a news feed, how to do that works on the edge, I read about the use of iframes to embed the video, but this approach does not work for me , I would like to use this software for all our web based projects, but I need to know if its possible to integrate html

  If anyone out there can point me to some documents or an example of how it's done, I would be so grateful! seriously love this software!

  Thanks in advance!

  
  

  Have you tried the jquery load() method?

  See here for reference . load() | jQuery API Documentation

  Basic example would be

  1. create a div element box and say call it widgetContainer in the assets Panel.
  2. with this item, go to the properties panel and set the Automatic Overflow property;
  3. Save the project as it is in a folder on your drive, and then copy widget files in a subfolder under the main folder of the project.
  4. then somewhere during your project, ala a handler (click, mouseover, etc) use the method load() to draw in the widget (.html) file directly in widgetContainer element;

  Example:

  I put this in the compositionReady event handler.

   sym.$("widgetContainer").load('html/sample.html');
  

  Copy the end Code.

  Hope this helps

  Darrell

• Animate the edge - how to change the size of the stage without changing the element of the scene & the size of the element?

  Hello

  I've created a demo using lively edge, the size of the demo is 1280 x 720. After that I want to change my size to 1280 x 600. But when I change dimension, the element in the file also change its dimension.

  For example - original size is 1280 x 720 & my element is rounded circle.

  When I hid it at 1280 x 600, the rounded cicle convert oval.

  but I want the same element of dimension to the stadium.

  Help, please...

  Concerning

  E. Kumar Muduli

  I'm having a hard time following your scenario...

  How you resize your internship?

  On the edge resize your stage normally does not affect the size of items on your stage.