Animation inside the movie clip symbols in the part "header" of the web site

Similar Questions

• Clickable button inside the movie clip symbol?

  I would like to know how I can have clickable buttons inside a movie clip symbol.
  
  
  Thank you.

  Your problem is mainly code compared to the location of objects location. When you start the file, the keys 1 to 8 are classified under code because they are visible, while the 9-11 thru buttons are not because they live in a non-current setting of the miniature timeline. When you switch to the side MORE things, these buttons is not any code assigned to them, and when you come back, the same is true for the first eight buttons because they were out of the picture and lost their connection to any code (the previous assignments have been already spent to frame 1 of the main timeline).

  What you should probably do is locate your button code for frames where the buttons in the thumbnail movieclip. In this way, their code is always where they are. The code of the keys 1 to 8 will be in frame 1 of the miniature clip and the code for 9 to 11 will be in frame 2. You need to change the code for the form:

  thumb1.onRelease = function() {}
  _parent.gotoAndPlay("1");
  };

  And you're going to do you a favor if you do not use the numbers of the labels.

• play movie clip symbol at the end of the animation, but does not appear in the timeline

  Work in Adobe Flash CS5

  When I play my movie in the Flash file, the animation stops at the end of the timeline, as it should. But when I test the movie, or export it to any film format, it will play an instance of a movie clip symbol that I used in the animation. There is no extra frame in the timeline panel beyond which must be considered to be the last image. Y at - it a setting or something I forgot that could cause this instance of the symbol to play at the end of the animation, without air in the main timeline? This can be corrected?

  your movieclip (or a parent) who plays on the main timeline or is loaded by your swf.  If you load this movieclip (published as a swf file), you can be sure that your movieclip (or a parent) is the culprit.

  Use the movie Explorer to find all instances of your movieclip using the library for this movieclip name.  If that does not reveal the culprit, you have either made a mistake in your search or if you have a movieclip in doubles.

• animation inside the symbol depends on the click counts

  Hello

  for example, there is a hammer striking the rock

  If I clicked 1 time - cracked rock (animation inside the symbol)

  twice - destroyed semi

  Triple - completely destroyed

  I have tryied this but it plays all the animations at the same time:

  -Make stop() end of each animation

  -by clicking on the symbol:

  var i = 0

  i ++

  {if(i==1)}

  Play('1000')

  }

  i ++

  {if(i==2)}

  Play('2000')

  }

  and so on

  but he plays any animation

  where is the error? =)

  Hello

  Here's a demo file: incrementingButtons.zip - Box

  I use a global variable. I put it with the Panel of compositionReady: sym.setVariable ("i", 0). You can also use the creationComplete Panel.

  Then I increment in a panel of the event (for example: click): sym.setVariable ('i', sym.getVariable ("i") + 1);

• Should I only use ActionScript with movie clip symbols

  A clip is the only type of symbol that I can use to manipulate with ActionScript if I simply want to create a static image of a button that triggers an event if clicked, this image must be saved as a movie clip symbol even if there is nothing animation on this subject?
  
  Thanks in advance.

  jcbluesman,

  > Is a clip, the only type of symbol that I can use for
  > handle with ActionScript?

  You can also use button symbols. Depending on the version of
  ActionScript you are using, you can generate these symbols (but no chart
  symbols) entirely by the code. If you have a little flexibility.

  > If I just want to create a static image of a button that
  > will trigger an event if clicked, that makes the image
  > must be saved as a movie clip symbol

  A clip would be the best choice, Yes. If you create the three
  time of symbols - a clip, a button and a graphic - and drag them
  on stage, you'll notice that only the clip and button will be
  allow you to give them names of instance with the property inspector. It's the
  name of the instance which allows ActionScript to 'talk' to these symbols by name.
  Graphic symbols do not for example names, then they are not programmable.

  David Stiller
  Co-author Foundation Flash CS4 for designers
  http://tinyurl.com/5j55cv
  "Luck is the residue of good design."

• Noob on chain and Movie Clip symbols question

  So, I have a table containing the names of occurrence of some movie clip symbols... I want to catch a random and perform operations above.
  
  So, I put a table with string names and grab one at random.
  
  var log_array:Array = ["truckStop_mc", "blackJack_mc"];
  Index number: var = Math.round (Math.random () * log_array.length);
  
  I then used track to make sure that I'm grabbing the name correctly... it is for me the names...
  
  trace (log_array [index]);
  
  I then try set the x and y property
  
  log_array [index] .x = 399,4;
  log_array [index] = - 3 there.
  
  I get this error when running:
  Cannot create the x on string property
  
  I tried to store only the clips themselves as objects but it wrong as well.
  
  var log_array:Array = [truckStop_mc, blackJack_mc];
  
  Is there a way to store the objects themselves in the table, or is it possible to convert this string to the object.
  
  Something like
  var obj:Object = getObject (log_array [index]);
  obj.x =...
  
  any help would be great... I was blocked a bit now.
  
  Thank you

  you need to store the instance name of the MC as you have in the second version here, as in:

  var log_array:Array = [truckStop_mc, blackJack_mc];

  ... However the RND formula should be adjusted to:

  Index number: var = Math.round (Math.random () * (log_array.length-1));

  ... And when you set properties on an MC XY, you need a stroke of underscores, differeing from the XY of an object property, as in:

  log_array [index] ._x = 399,4;
  log_array [index] ._y = - 3;

• I just bought a new computer and re-installed Firefox. Now, when I surf I get no attention (or not) of symbols showing how security is the Web site. Why not?

  On my old computer with Firefox, when I used a search engine and keywords, all sites that displayed had a color code beside him who showed how the security of the Web site was or was not. On my new computer w / Firefox, I get no color symbol showing the security of the site.

  Hello, this is no functionality to firefox integrated but provided by an extension, likely of WOT. You can just add it as addon on your new system again...

• I need to open the web site even in two separate tabs. Since I've upgraded to Firefox 6 when I try to open the web page in a new tab in the list in the drop down in the address window it gives that the opportunity to move to the already open tab.

  When I get off the fall from the address window, rather than display the URL of the Web site I want to open in a second tab says "switch to the tab '. But I don't want to move to the tab - I want to open a second tab on the same URL. If I want to open it a second time, I have to manually enter the address. Is it possible to turn off this option so that I can open the second tab by using the same address in the drop-down menu? I was always able to do this with the previous versions of Firefox.

  "Is it possible to turn off this option so that I can open the second tab by using the same address in the drop-down menu?

  You can install this add-on: https://addons.mozilla.org/en-US/firefox/addon/switch-to-tab-no-more/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• You cannot change the location of the Web site folder

  Greetings,

  When I change the location of the Web sites folder in the server application by changing ' Store Site Files In: ", the files in the default location of continue to load and not those of the location, I've specified. The location, I put is saved in the server application. I can leave the Server app and start again and see the location I specified, but it does not use this place.

  Thank you

  Read https://help.apple.com/serverapp/mac/5.1/#/apd1AB74EDF-C5B3-4C20-AD02-42120FF3B2 08 and try to stick to these principles as much as possible.

  The steps under does not include the method to change the location of the root folder, as Apple has as focus not exactly that.

  Add or change Web pages on your Web site

  To change what is available on the Web site, change the files in the folder to root for the document to your Web site. Folder document root is the folder that contains your website files.

  Use the server application to find the root of your Web site. Default document root is/Library/Server/Web/Data/Sites/Default /. In addition, when you create a site and let the application Server automatically creates a new folder for you, he places the site filesin/library/server/Web/Sites/data/domain_name/.

  1. Selection of sites in the sidebar the Server app.
  2. Select the Web site, and then click the button change .
  3. Click the arrow to the left of the menu pops - up Store Site files in. The Finder opens at the location the document root. Edit files in this folder to change what is available on the Web site.

  They wanted to provide a foolproof server where effective MDM can be performed. Therefore, they went very far to ensure that it should not be messed with. The integrity of services that ensures the effective management of Apple devices are paramount.

  Therefore, I think that you try unfairly to move the part of the services and server would not allow you to do so, as the Profile Manager and Wiki should still work after you have set up to host your Web sites (which Apple documentation referred to as virtual hosts).

  Thus, you need to configure the "Virtual Hosts" with their root of the document.

  HTH

  Leo

  Edit: If you had read: /Library/Server/Web/Config/apache2/ReadMe.txt

  and scroll down to sites you'd understand more.

• Difficulty in interacting with the Web site with Windows 8 and touchscreen

  I am trying to interact with a website (www.khanacademy.com) to work on my math skills and I meet a lot of frustration.

  One of the things that Khan fact is that it is an interactive learning site, but when I try to interact with the notebook on the Web site through my touch screen it's just little dots. Also when I try to select and drag a shape to rearrange in a group I can move the form around a 1/4 inch and then the age of the web moves as I tried to move the page. And if I try to double-click the form it zooms in on the page.

  Can someone help me with this? I really need to be able to work on my math stuff, and one of the reasons for which I received a computer with a touchscreen was if I could interact with this type of websites.

  I want to x 360 HP TouchSmart running Windows 8.1

  Altogether.  Khan must references these two pages to find out how to program their site correctly:

  Setting the touch-action property

  Prepare your site contact

  Guidelines for the construction of touch-friendly Web sites

• I didn't care that "connection is not sure" I want to go on the Web site

  Firefox won't let me go to a website because "the connection is not safe." I don't like that it's not safe, I need to download something there and Firefox, IE, and Opera is the only supported browsers. I tried IE and won't go out of my way to download Opera. The link is blocked from my view as you can see in the picture. I don't know why this is happening, but it pisses me off no end. If you could help, that would be just super.

  There are security software such as Avast and Kaspersky and BitDefender and ESET which intercepts secure connections and sends its own certificate.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the "Add Security Exception" this URL chrome by pasting into the address bar of Firefox and check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field of location of this window, type or paste the URL of the Web site.

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  You can check details such as the issuer and the certificate chain in the Details tab of the certificate display.
  Check which is the issuer of the certificate.
  If necessary, you can attach a screenshot that shows the display of the certificate.

• Connections to the Web site

  Since the update of Firefox for windows 10 I cant get onto certain websites.
  All I get is the error message. Tried removing Firefox firewall and adding back on. Don't agree.
  Never had any problem until I updated. I have triewd the removal of Firefox and download again. Still not good.
  Disabled extensions and Add ons still no joy.
  Anyone know why this is happening. Could be something simple, but I just don't find that.

  The secure connection failed

  An error occurred during a connection to www.qrz.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the web site owners to inform them of this problem.
  

  Hi, in case, you're an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• Cannot update or load the Web site.

  Hi, my name of Chris and I bought a MacBook Air off of eBay about 2 years ago and I decided to use it and I noticed that I was on the version of Mac OS X 10.6.8 and he decided to search for software updates. As soon as I tried to check, he would fail and a pop up appears saying "Update software cannot verify updates due to a network problem". I am absolutely convinced that my internet connection completely works because I just got about 1 week ago. I am sorry to ask a lot, but another problem I have is that whenever I go online, some site not loading and under him, it appears "ERR_EMPTY_RESPONSE". On the Web site like YouTube and Apple Discussion of work. It would help if someone could help me solve these 2 problems.

  You have access to another network where you can see if you still have the same problems? This will help determine if there is a problem with the network or computer.

  Did you reboot / reset the router?

  Connection to the problems of the App Store

  Connection to the problems of the App Store (2)

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

• I downloaded the update to FF twice, but the web sites are not displayed despite my being on the page. Also restarted.

  Web pages (I tried different web sites) are not displayed, but the line at the bottom of the screen indicates that I am indeed on the web site. Previously, before, I downloaded the version nerw of FF, display web pages seemed slow unless I'm assured by cursor was "large" of the space on the screen that displays the web page.

  I checked with another browser and websites I went to work and are displayed in the browser.

  
  

• Firefox for Android (4.2.2) - what are the problems with the presentation of the Web site?

  For the vast majority of websites read Firefox for Android did a great job. But for some websites there are the following two issues - either the website opens but not all content correctly (buttons missing, menus does not, fault of formatting), or Firefox for Android crashes when video or flash on the chosen site is enabled. As the video works perfectly on other sites, I can only imagine that there is something on some sites that Firefox for Android is not satisfied...

  In addition, properly installed Flash Player for android 4.0 of Adobe's Archive (11.1.115.81) still crashes as well.

  (YouTube works perfectly, by the way!)

  Which checks that I can do or what settings can I change to fix this problem?

  Thank you for your question, it strikes a few topics that I would be happy to help you with.
  For the first:
  not all content correctly (buttons missing, menus does not, fault of formatting).
  
  
  
  This will depend on the Web site. Buttons and menus can be designed to use javascript and the formatting can be dynamic according to the plethora of screensizes that designers of web sites planned for the website to be seen by.

  Firefox for Android crashes when video or flash on the chosen site is enabled

  It will depend also on the Web site. Some sites will be equipped with a built-in video player and others will use the installed video player. Flash compatibility is also related to the hardware of the device. He needs an ARM7 over my head.

  What we can try to do to change that. Try another video player for sites giving questions. If its possible to download a local copy and watch the video on the video player of choice. It is also an option to try to ask the site Office of some sites won't load not well. If the site detects a drive by default, you can try VLC.

• The Web site is too small to read

  On a single website (Noxxic.com), I have somehow shrunk the whole site is too small. Yes, the display is set in full screen. The beginning of the problem occurred when suddenly my mouse wheel had control of displayed information & I rolled the scroll wheel and locked it in a smaller position. I tried without success to reproduce the situation.

  I have cleared the cache, cookies and history within the application

  Hello, try pressing ctrl + 0 ("zero") while you are on the page to restore the zoom level or where it does not browse other troubleshooting procedures common to the Web sites look bad or appear differently than they should.