animation using the recorded video

Similar Questions

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• How can I use the audio/video Sockets front?

  I have a desktop Pavilion HPE - 480 t and can't find documentation anywhere on how to use the autio/video taken before.  When I plug in a device no software will automatically load.  Is there a bundled program that recognizes them?

  Hello azbard, you might be able to use the recording feature in Windows 7 to save from the back Line In jack.

  Plug your tape on the back Line In jack, and then go to the Control Panel, sounds and in the recording tab, check if the Line In Jack shows any connected device.

  If so, you can go to start ORB, all programs, accessories, Sound Recorder and see if you can save the tape.

  It can work either, but may be worth a try.

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them

• Qosmio F20-155: colors wrong when I try to use the S-video connection

  When I try to use the S-video, the photo shows with wrong colors or color of Pentecost. Do I need some kind of driver?

  Sometimes the photo looks like it (press the link to see)
  http://www.jawally.com/VB/uploaded/6_ss.gif

  Please give little assistance...

  Thank you for your time

  Majed

  Hello

  Just a question: you´re talk about the video-in and video output on your laptop, not an expansion or a USB-video output or something else card?
  A machine you have respectively which model do do you have?

  Greetings

• Embedded the swf using the external video (FLVPlayback) error #2035 / #2044

  I struggled with this a lot recently, and I don't even know if it's at all possible.

  I am currently working on a project where I am incorporating a .swf inside another .swf.

  The built-in .swf file however also uses the external videos FLVPlayback to load component, this is where the problem starts.

  When you publish the .fla project I get the 2035 # IOErrorEvent when tracing the problem I get the #2044, it is to be expected however.
  

  The embedded swf is always looking for external videos, but since the new ROOT is the swf file, in which it is integrated, it will not find these videos.

  I need to know if there is a way I can specify or link these external videos required by the embedded swf file FLVPlayback component.

  I really can't be bothered again all the video content and their incorporation in the timeline.

  Thank you.
  

  The code inside the SWF will trigger these errors will occur if you don't have the source for sovereign wealth funds to stop it.

  If you do then you can just access SWF files loaded the mother/stub swf you have and check anything with a name or instance on the display list with the code, as all of the FLVPlayback components. You can then tell them the correct path.

  Otherwise, it would take something like a rewrite mod apache to redirect paths incorrect film to the correct path.

• Satellite Pro A300D-131 - how to use the S-Video TV output

  How configure you output to a TV LCD TV S-Video output jack? I tried everything I can think but cannot make it work.

  Hello

  That s easy.
  You must use a 4-pin s-video cable to connect the TV to the laptop.
  Connect both devices, then turn on the laptop, then TV, use the FN + F5 key combination to switch to the external device (TV).

  PS: You have to choose the right channel of TV (s-video must be enabled)

  All that s

• How to use the S-VIdeo cable SCART?

  I just bought a monster S-VIdeo/SCART lead to allow me to watch PC off-set on the TV screen. Pluged but nothing works.

  Tried it on second TV (all sing/dance chic a self-diagnosis). Still no joy...

  Any suggestions apprecaited apart from throwing them both off window... Do I need any special driver? If yes where?
  Thanks in advance...
  Reply on [email protected]

  Hello

  Laptop is unknown, but generally you will allow on TV in the properties of the graphics card-> advanced or you will try to change the display device by using the FN + F5 key combination.

  Please don t forget a fact some TV devices has no s-video enabled by default, so maybe, you must activate the s-video on your TV before moving on to the screen from the laptop to the TV

• Satellite A100-192: how to use the s-video output?

  My A100-192 out s-video. Can I use it to watch DVD on screen? What is needs? Can be no problem - simple connect laptop with TV and relax. Or problems?

  Hello

  Generally all the information on how to connect laptop to TV, you should find in the manual of Toshiba which is already preinstalled on the laptop.

  The laptop supports a switch for easy display on television.
  By using the FN + F5 key combination, you can switch between display devices.
  Therefore, you must connect the laptop with the s-video cable to the TV, turn on the s-video on your TV and the FN + F5 to change the TV screen output.

  If you want to watch DVDs, you must use a DVD as WinDVD playback software.

• Satellite P300-1GK - I can't use the S-video port

  Hello

  According to the specifications of the laptop, I have a S-Video output. The problem is that there is something just in front. So I can't use it. Check the picture.

  http://img220.imageshack.us/my.php?image=p1010027s.jpg

  How can I do?

  Hello

  Seems the specifications listed on the page are not entirely correct.
  Satellite P300-1GK supports TV-out but NOT s-video and Composite port!

  In addition, HDMI port output is available to connect the laptop to an LCD HDTV.
  But some other models support the s-video and that's why you can see a place for s-video port in the lid of the laptop

  I hope I could bring a precision!

  Good bye

• Gray display using the S-video out on Satellite A200-24 b

  Hello everyone

  I have Toshiba Satellite A200-24 b, equipped with S-video port.
  When I connect to my TV to always display in grayscale mode (no colors)
  I tried to use other cables and other TV, but always with the same problem.

  the cable I used is the S-video to video (A V).

  someone has an idea for this problem?

  Thank you

  Hello

  There are different reasons why you get only a black and white picture on the TV.

  I had the same problem because I used an s-video-to-SCART cable and the pin assignment didn't match with the assignment of the TV port pins.
  But the same cable worked in another TV.

  Another reason could be the bad PAL/NTSC setting.
  Please check this!

• How to use the record type as a parameter IN PL/SQL procedure or package

  Hi people,

  I need help on the record as the OUT parameter type. I am able to get out a single line as a parameter, but not getting do not idea how to get a multi ranks as output parameter.

  I have the code that works very well for a single line. Please see CODE1.

  But when I try to get several lines, I'm failing to do. Please see the CODE2. I get the error of compilation as

  
  

  Error report:

  ORA-06550: line 11, column 35:

  PLS-00487: Invalid reference to the variable "P_NAME.

  ORA-06550: line 11, column 1:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  Any help or a sample execution of script would be really useful.

  Thanks in advance.

  YZ

  --------------------------CODE1------------------------------------------

  -------------------------Package Spec-------------------------------

  CREATE OR REPLACE

  PACKAGE xx_sample_pkg as

  --

  Xx_sample_table_rectype RECORD TYPE IS

  (p_name varchar2 (40))

  number of p_emp_id

  );

  PROCEDURE xx_sample_prc (xx_sample_rec1, OUT xx_sample_table_rectype);

  END xx_sample_pkg;

  ------------------------------Package Body------------------------

  create or replace

  PACKAGE xx_sample_pkg AS BODY

  --

  PROCEDURE xx_sample_prc (xx_sample_rec1 OUT xx_sample_table_rectype) IS

  BEGIN

  SELECT ename, empno

  IN xx_sample_rec1

  FROM scott.emp

  WHERE ename = 'SMITH ';.

  END xx_sample_prc;

  END xx_sample_pkg;

  -------------------------------------------Execute----------------------

  DECLARE

  l_rec_type xx_sample_pkg.xx_sample_table_rectype;

  BEGIN

  dbms_output.put_line ('xx_sample_prc appeal');

  xx_sample_pkg.xx_sample_prc (l_rec_type);

  dbms_output.put_line ('YZ' | l_rec_type.p_name |') '|| l_rec_type.p_emp_id);

  END;

  ---------------------------------------------------------------

  -------------------------CODE2-------------------------------------------

  -------------------------Package Spec-------------------------------

  CREATE OR REPLACE

  PACKAGE xx_sample_pkg as

  --

  Xx_sample_table_rectype RECORD TYPE IS

  (p_name varchar2 (40))

  number of p_emp_id

  );

  PROCEDURE xx_sample_prc (xx_sample_rec1, OUT xx_sample_table_rectype);

  END xx_sample_pkg;

  ------------------------------Package Body------------------------

  create or replace

  PACKAGE xx_sample_pkg AS BODY

  --

  PROCEDURE xx_sample_prc (xx_sample_rec1 OUT xx_sample_table_rectype) IS

  BEGIN

  SELECT ename, empno

  IN xx_sample_rec1

  FROM scott.emp;

  END xx_sample_prc;

  END xx_sample_pkg;

  -------------------------------------------Execute----------------------

  DECLARE

  l_rec_type xx_sample_pkg.xx_sample_table_rectype;

  BEGIN

  dbms_output.put_line ('xx_sample_prc appeal');

  xx_sample_pkg.xx_sample_prc (l_rec_type);

  for l_rec in 1.l_rec_type.p_name.count

  loop

  dbms_output.put_line ('YZ' | l_rec_type.p_name (l_rec) |) » '|| l_rec_type.p_emp_id (l_rec));

  end loop;

  end;

  ---------------------------------------------------------------

  bb8c573a-6ca3-4d7c-90ed-e55c2df67201 wrote:

  But now, my question would be why the record type could not be used? My understanding is missing some concept between use of type type array collection record vs. Please specify.

  Do not confuse the folder with the collection.

  SY.

• Using the record of decision in the Java API

  Hey all,.
  
  I work with an integration of Java of the OPA, and I'm curious to know how to exploit the record of decision by using the Java API for the information I'm after.
  
  Basic example:
  
  X = Maximum (A, B)
  
  In a record of decision, I see that A and B are used to determine X, but is there a way to know what is done with the API? I know its somewhere, I just need to get to work!
  
  Another example:
  
  X = (A - B) * C
  
  How can I retrieve what exactly happened in java using the API? Is this possible?
  
  Thank you!!!
  
  Dan

  Dan,

  Records of decision (code or xml) unfortunately do not go into that kind of detail. Records of decision describes what values are relevant and values assumed under influence, but they have no detailed calculation of information in them.

  It is not possible to do what you are trying to do.

  See you soon
  Frank

  Daniel Hager wrote:
  Hey all,.

  I work with an integration of Java of the OPA, and I'm curious to know how to exploit the record of decision by using the Java API for the information I'm after.

  Basic example:

  X = Maximum (A, B)

  In a record of decision, I see that A and B are used to determine X, but is there a way to know what is done with the API? I know its somewhere, I just need to get to work!

  Another example:

  X = (A - B) * C

  How can I retrieve what exactly happened in java using the API? Is this possible?

  Thank you!!!

  Dan

  Published by: frank.hampshire on April 10, 2013 10:42

• Is it possible to use the record type or a PL/SQL table in the Select statement

  Hi all
  
  My requirement is that.
  I want to write a query and write a function, function, I want to return multiple columns at the same time in a Select statement.
  I select the return values in the Select no statement in a PL/SQL block.
  Is it possible to use the PL/SQL Table or Variable of Type record, or any other method in the statement Select?
  
  Please help me understand the solution.
  
  
  Kind regards

  830960 wrote:
  do we like it?

  In general, Yes, if the function is a function table, you can do something like:

  select  t.col1,
          t.col2,
          f.col1,
          f.col2,
          f.col3
    from  table_name t,
             table(some_table_function(param1,...paramN)) f
  /
  

  SY.

• Change the speed of the animation using the code

  • Created an animation for a rectangle that will either upwards or downwards.
  • Is it possible to change the speed of the rectangle only when he goes to the top using the code?
  • Here is the code for the button:

  If (sym.getComposition () .getStage (.getSymbol("rect").upDown) == 0) {}

  sym.getComposition () .getStage ().getSymbol("rect").upDown = 1;

  sym.getComposition () .getStage ().getSymbol("rect").playReverse ();

  }

  else {}

  sym.getComposition () .getStage ().getSymbol("rect").upDown = 0;

  sym.getComposition () .getStage ().getSymbol("rect").play ();

  }

  Thank you

  Eddie

  Hey, Eddie.

  There is no way to dynamically change the speed of an animation, such as defined in a calendar.  You can code by hand animation or simply change the duration of the animation in the timeline.

  Hope that helps,

  -Elaine