How to use the S-VIdeo cable SCART?

Similar Questions

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them

• Satellite A100-192: how to use the s-video output?

  My A100-192 out s-video. Can I use it to watch DVD on screen? What is needs? Can be no problem - simple connect laptop with TV and relax. Or problems?

  Hello

  Generally all the information on how to connect laptop to TV, you should find in the manual of Toshiba which is already preinstalled on the laptop.

  The laptop supports a switch for easy display on television.
  By using the FN + F5 key combination, you can switch between display devices.
  Therefore, you must connect the laptop with the s-video cable to the TV, turn on the s-video on your TV and the FN + F5 to change the TV screen output.

  If you want to watch DVDs, you must use a DVD as WinDVD playback software.

• Satellite Pro A300D-131 - how to use the S-Video TV output

  How configure you output to a TV LCD TV S-Video output jack? I tried everything I can think but cannot make it work.

  Hello

  That s easy.
  You must use a 4-pin s-video cable to connect the TV to the laptop.
  Connect both devices, then turn on the laptop, then TV, use the FN + F5 key combination to switch to the external device (TV).

  PS: You have to choose the right channel of TV (s-video must be enabled)

  All that s

• How can I use the audio/video Sockets front?

  I have a desktop Pavilion HPE - 480 t and can't find documentation anywhere on how to use the autio/video taken before.  When I plug in a device no software will automatically load.  Is there a bundled program that recognizes them?

  Hello azbard, you might be able to use the recording feature in Windows 7 to save from the back Line In jack.

  Plug your tape on the back Line In jack, and then go to the Control Panel, sounds and in the recording tab, check if the Line In Jack shows any connected device.

  If so, you can go to start ORB, all programs, accessories, Sound Recorder and see if you can save the tape.

  It can work either, but may be worth a try.

• How to use the video port with Vista on Qosmio G30

  Im running windows vista Ultimate edition.
  How to use the monitor in port?

  The Composite (in the port monitor) port is placed to the right.
  With the video component cable software plug-in delivered a CATV or satellite box can be connected to the computer to watch channels.
  You can for example use the Qosmio Player or Windows Media Center to watch other channels.

  As much as I know the ultimate Vista supports Windows Media Center, Windows Media Center HDTV.
  You should read some more details on your new operating system!

• When you try to import video JVC DVC using Movie Maker, Movie Maker does not recognize DVC using the IEEE 1394 cable

  Windows movie machine to import JVC DVC with cable IEEE1934.

  When you try to import video JVC DVC with movie maker. Filmmaker does not recognize DVC using the IEEE 1394 cable. How can I me Movie maker to see the CVN. Using XP SP2.

  Perhaps the following links will help you get started:

  Movie Maker and JVC Camcorders
  http://Papajohn.org/mm2-camcorders-JVC.html

  Movie Maker 2 - importing files MOD
  http://Papajohn.org/mm2-importing-video-mod.html

• I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal.

  original title: pictures playing on tv

  I connected my computer to the tv using an s-video cable, but I get a tv error message that says that the entrance with no signal. I know that I have selected the right input of the TV. Is there something that I need to set up the laptop to send the signal to the s-video connector?

  Perhaps the following links will propose a few ideas:

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set How to connect my computer to a TV
  http://hookpctotv.com/ PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Satellite Pro M50 with Vista: how to get the S-video on the job?

  Hi all

  I have a vista equipped Satellite Pro M50. Does anyone know how to get the S-video on the job? I can't understand.

  Inadvance, see you soon

  Phil

  Did you look in the user manual?
  This doc is always pre-installed on laptop and provides useful information. Also how to connect a TV and use simple notebooks ports.

  A hint; You must use an s-video cable to connect the laptop to the TV.
  Then use the FN + F5 key combination to switch between display devices.
  Sometimes the special s-video option must be enabled on the TV.

  I would recommend consulting the manual of the TV also.

  Good bye

• Gray display using the S-video out on Satellite A200-24 b

  Hello everyone

  I have Toshiba Satellite A200-24 b, equipped with S-video port.
  When I connect to my TV to always display in grayscale mode (no colors)
  I tried to use other cables and other TV, but always with the same problem.

  the cable I used is the S-video to video (A V).

  someone has an idea for this problem?

  Thank you

  Hello

  There are different reasons why you get only a black and white picture on the TV.

  I had the same problem because I used an s-video-to-SCART cable and the pin assignment didn't match with the assignment of the TV port pins.
  But the same cable worked in another TV.

  Another reason could be the bad PAL/NTSC setting.
  Please check this!

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• How to activate the S-video port on a satellite M30X 154?

  Hey does anyone know how to activate the S-video port on your laptop by Satellite SM30X-154?

  If I press the FN + 5 keys the only options I get is LCD and no S-VHS option. My TV is set up for this I have Watch DVD through the cable.

  When I connect the cable to the laptop, nothing happens!
  Help

  Hello

  Sorry, my A100 Tosh has a Geforce 7600, I don't know what is your GA.

  But on mine, I have a NVidia Control Panel, where I can configure dualview,
  normally, which allows me to choose between the builtin LCD and the external monitor (VGA Port).

  When a TV is plugged and not recognized, I can apply recognition there.
  Relative to the opening of the Panel, the TV is also available.

  Maybe I could help you.
  If this isn't the case, note that the settings of windows your TV is not available.
  Try to go to the User Interface of your graphics card...

  Matz

• Satellite P300-133 - how to use the internet connection via BlueTooth

  Hello

  I finally solve my problem with the synchronization via bluetooth between my P300-133 and my [HTC | http://www.htc.com/europe/product.aspx?id=15674] with Windows Mobile 5 - with step by step instructions of Toshiba.

  But I don't know how to use the Internet via BT, I tried many ways, one of them was to create a PAN with P300 as server - correctly connected HTC to P300, but it seams I can share internet with P300 as a gateway. And I want to do the opposite - get internet from my mobile to the computer (while she is away from all the cables). I'm not sure this PAN in the right way...

  The question of the other and less important is to be able to share that connection with your laptop via bluetooth - I guess that this must be done through Pan

  Thanks for any help.

  Bartek

  You found a solution to this?

• My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  I followed the instructions on my laptop on how to connect to broadband and I even called the company from whom get connection but they could n, t help me. I need help! I want to use my wireless laptop and how do I do it?

  Hi Hn_668,

  See the articles below and check if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx