Gray display using the S-video out on Satellite A200-24 b

Similar Questions

• Cannot use the webcam with chat programs - Satellite A200-AH7 Vista

  Satellite A200-AH7/Vista Home Premim/Chicony USB 2.0 built in webcam

  I can't understand how get the audio works with built in chicony webcam when in a chat program or any program for that matter. I can record audio and reading later, but this isn't what I want to do. It's probably just something stupid that miss me... but any help would sure be appreciated... I tried with Windows Live and Yahoo messenger, and so far all I can do is wave to people LOL. I was never able to get it to work... any ideas?

  Today I bought a Logitech Quickcam for notebooks in case the problem is with the construction in camera. I don't want to install it unless absolutely necessary and think I would need to uninstall the Chicony to make it work... someone can point me in the right direction?

  I just want to be able to talk to my grandchildren...

  Thanks in advance,
  Sue

  Hello

  He is a Canadian for Toshiba laptop model.
  Please see the Toshiba Canada Web site to get the right webcam software:

  http://209.167.114.38/support/TechSupport/ln_TechSupport.asp

  First remove the old webcam software. Reboot the laptop. Clean the registry and the system using the CCleaner (it of free). Reboot the laptop again one and then install the new software of webcam!

  Welcome them

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them

• Embedded the swf using the external video (FLVPlayback) error #2035 / #2044

  I struggled with this a lot recently, and I don't even know if it's at all possible.

  I am currently working on a project where I am incorporating a .swf inside another .swf.

  The built-in .swf file however also uses the external videos FLVPlayback to load component, this is where the problem starts.

  When you publish the .fla project I get the 2035 # IOErrorEvent when tracing the problem I get the #2044, it is to be expected however.
  

  The embedded swf is always looking for external videos, but since the new ROOT is the swf file, in which it is integrated, it will not find these videos.

  I need to know if there is a way I can specify or link these external videos required by the embedded swf file FLVPlayback component.

  I really can't be bothered again all the video content and their incorporation in the timeline.

  Thank you.
  

  The code inside the SWF will trigger these errors will occur if you don't have the source for sovereign wealth funds to stop it.

  If you do then you can just access SWF files loaded the mother/stub swf you have and check anything with a name or instance on the display list with the code, as all of the FLVPlayback components. You can then tell them the correct path.

  Otherwise, it would take something like a rewrite mod apache to redirect paths incorrect film to the correct path.

• Qosmio F20-155: colors wrong when I try to use the S-video connection

  When I try to use the S-video, the photo shows with wrong colors or color of Pentecost. Do I need some kind of driver?

  Sometimes the photo looks like it (press the link to see)
  http://www.jawally.com/VB/uploaded/6_ss.gif

  Please give little assistance...

  Thank you for your time

  Majed

  Hello

  Just a question: you´re talk about the video-in and video output on your laptop, not an expansion or a USB-video output or something else card?
  A machine you have respectively which model do do you have?

  Greetings

• How can I use the audio/video Sockets front?

  I have a desktop Pavilion HPE - 480 t and can't find documentation anywhere on how to use the autio/video taken before.  When I plug in a device no software will automatically load.  Is there a bundled program that recognizes them?

  Hello azbard, you might be able to use the recording feature in Windows 7 to save from the back Line In jack.

  Plug your tape on the back Line In jack, and then go to the Control Panel, sounds and in the recording tab, check if the Line In Jack shows any connected device.

  If so, you can go to start ORB, all programs, accessories, Sound Recorder and see if you can save the tape.

  It can work either, but may be worth a try.

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• After using IMAQ RT Video Out, how to return to the string of rt debugging output?

  After having used the video on VI IMAQ RT, the screen image as expected. Then, I want to return to the display console where I can see the RT Debug channels and the processor. Is this possible?

  Infinite,.

  The previous answer is incorrect. It is possible to change the mode back to text video. Just use the "IMAQ out video display Mode" VI for the parameter "Text Mode". This should restore the display of text.

  -Eric

• Satellite A100-192: how to use the s-video output?

  My A100-192 out s-video. Can I use it to watch DVD on screen? What is needs? Can be no problem - simple connect laptop with TV and relax. Or problems?

  Hello

  Generally all the information on how to connect laptop to TV, you should find in the manual of Toshiba which is already preinstalled on the laptop.

  The laptop supports a switch for easy display on television.
  By using the FN + F5 key combination, you can switch between display devices.
  Therefore, you must connect the laptop with the s-video cable to the TV, turn on the s-video on your TV and the FN + F5 to change the TV screen output.

  If you want to watch DVDs, you must use a DVD as WinDVD playback software.

• How to use the S-VIdeo cable SCART?

  I just bought a monster S-VIdeo/SCART lead to allow me to watch PC off-set on the TV screen. Pluged but nothing works.

  Tried it on second TV (all sing/dance chic a self-diagnosis). Still no joy...

  Any suggestions apprecaited apart from throwing them both off window... Do I need any special driver? If yes where?
  Thanks in advance...
  Reply on [email protected]

  Hello

  Laptop is unknown, but generally you will allow on TV in the properties of the graphics card-> advanced or you will try to change the display device by using the FN + F5 key combination.

  Please don t forget a fact some TV devices has no s-video enabled by default, so maybe, you must activate the s-video on your TV before moving on to the screen from the laptop to the TV

• Satellite P300-1GK - I can't use the S-video port

  Hello

  According to the specifications of the laptop, I have a S-Video output. The problem is that there is something just in front. So I can't use it. Check the picture.

  http://img220.imageshack.us/my.php?image=p1010027s.jpg

  How can I do?

  Hello

  Seems the specifications listed on the page are not entirely correct.
  Satellite P300-1GK supports TV-out but NOT s-video and Composite port!

  In addition, HDMI port output is available to connect the laptop to an LCD HDTV.
  But some other models support the s-video and that's why you can see a place for s-video port in the lid of the laptop

  I hope I could bring a precision!

  Good bye

• Satellite Pro P300 - always 1 is displayed using the numeric keypad

  Hello

  I recently bought a Toshiba Satellite Pro P300, it has been the problem for free for 4 weeks.

  Now, when I try to use the numeric keypad on the keyboard what is displayed on the screen is '1' any number of type i.

  Does anyone know how can I fix?

  Hello

  I think it's a question that should be checked by a Toshiba ASP.
  I googled a bit but and someone has reported that a parameter must be changed to DMI

  I think that this can be done by a technician of ASP.
  Then you should get in touch with the guys and should ask for help and also handling

  See you soon

• Satellite Pro A300D-131 - how to use the S-Video TV output

  How configure you output to a TV LCD TV S-Video output jack? I tried everything I can think but cannot make it work.

  Hello

  That s easy.
  You must use a 4-pin s-video cable to connect the TV to the laptop.
  Connect both devices, then turn on the laptop, then TV, use the FN + F5 key combination to switch to the external device (TV).

  PS: You have to choose the right channel of TV (s-video must be enabled)

  All that s

• Cannot be displayed using the sdk of twitter

  I am unable to switch using the sdk of twitter, My credential is unable to check every time. Please test my code where I'm wrong

  package mypackage;

  Import impl.rim.com.twitterapime.xauth.ui.BrowserFieldOAuthDialogWrapper;
  Import net.rim.device.api.browser.field2.BrowserField;
  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.component.ButtonField;
  Import net.rim.device.api.ui.component.Dialog;
  Import net.rim.device.api.ui.component.LabelField;
  Import net.rim.device.api.ui.container.MainScreen;

  import com.twitterapime.rest.Credential;
  import com.twitterapime.rest.TweetER;
  import com.twitterapime.rest.UserAccountManager;
  import com.twitterapime.search.Tweet;
  import com.twitterapime.xauth.Token;
  import com.twitterapime.xauth.ui.OAuthDialogListener;
  import com.twitterapime.xauth.ui.OAuthDialogWrapper;
  SerializableAttribute public class TwitterScreen11 extends form {}

  Private final String CONSUMER_KEY = "NNIMJ7Jwy3fbYKCuSt0eA";
  Private final String CONSUMER_SECRET = "XVkHEu8G6Ne52Rpujlwu8qOkB5jYfhFSNTeurMBCt8";
  "Final Private String CALLBACK_URL ="http://www.google.co.in ";//' http://twitterapp: / / connect";
  private LabelField _labelStutus;
  private OAuthDialogWrapper WrapperPage = null;
  public StoreToken _tokenValue;
  ShowAuthBrowser showAuthBrowserScreen;

  public TwitterScreen11()
  {
  setTitle ("Twitter integration using OAuth");

  showAuthBrowserScreen = new ShowAuthBrowser();

  Add (new ButtonField ("Tweet") {}
  protected boolean navigationUnclick (int status, int time) {}
  showAuthBrowserScreen.doAuth (null);
  UiApplication.getUiApplication () .pushScreen (showAuthBrowserScreen);

  Returns true;
  }
  });
  }

  ' public boolean doTweet (String message, Credential c)
  {
  Boolean = false;
  UAM UserAccountManager = UserAccountManager.getInstance (c);
  Try
  {
  If (uam.verifyCredential ())
  {
  TweetER.getInstance (uam) .post (new Tweet (message));
  = true;
  }
  }
  catch (System.Exception e)
  {
  System.out.println ("error in posting tweet". + e.getMessage ());
  }
  return;
  }

  class ShowAuthBrowser extends OAuthDialogListener implements screen
  {
  BrowserField b = new BrowserField();

  public ShowAuthBrowser()
  {
  _labelStutus = new LabelField ("your app is be allow.");
  Add (_labelStutus);
  Add (b);
  WrapperPage = new BrowserFieldOAuthDialogWrapper(b,CONSUMER_KEY,CONSUMER_SECRET,CALLBACK_URL,this);
  pageWrapper.setOAuthListener (this);

  }
  public void doAuth (string PIN)
  {
  Try
  {
  If (brooch is nothing)
  {
  pageWrapper.login ();
  }
  on the other
  {
  this.deleteAll ();
  Add (b);
  pageWrapper.login (PIN);
  }

  }
  catch (System.Exception e)
  {
  the final message String = "error loggin Twitter:"+ e.getMessage ();.
  Dialog.Alert (message);

  }
  }

  {} public void onAccessDenied (string response)
  Dialog.Alert ("Access denied");
  System.out.println ("access denied! -> "+ response);
  updateScreenLog (Acceso refused '! ") -> "+ response);

  }

  {} public void onAuthorize (final token token)

  last token token = myToken;

  Credential c = new information of identification (chip CONSUMER_KEY, CONSUMER_SECRET),
  String message = "888 here."
  Boolean = false;
  done = doTweet (message, c);
  if(Done == true)
  {
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  UiApplication.getUiApplication () .pushScreen (new MyScreen ("Tweet succusfully"));
  }
  });
  } else {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  UiApplication.getUiApplication () .pushScreen (new MyScreen ("Impossible to tweet"));
  }
  });

  }
  //                }
  //            });

  }

  ' public void onFail (String arg0, String arg1) {}
  Dialog.Alert ("fail Authroise");
  updateScreenLog ("error authenticating user. -> "+ arg0 +", "+ arg1);"

  }
  }

  Private Sub updateScreenLog (final String message)
  {
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}

  public void run() {}
  _labelStutus.SetText (message);
  }
  });
  }

  public boolean onClose() {}
  Close();
  Returns true;
  }

  }

  Help, please

  Hi nidhicdn,
  I've done the integration of Twitter. You can download the demo here http://supportforums.blackberry.com/t5/Java-Development/Twitter-integration-exception/td-p/2472381/p....  but read this thread to start.

• [CC 2014] Why the transparency grid display makes the paths appear out of step?

  Illustrator CC 2014, under Windows 7

  When I use the menu command view > show transparency grid it looks like a lag effect is applied to all paths, of the text.

  It gives me a wrong view of my document. Very frustrating.

  That's what I see when I toggle to display the grid transparency:

  

  I discovered today that the inaccurate 'path of lag' effect happens only when using file > preview GPU.

  Study further, I finally noticed the new options of Preferences > experimental features. The one called 'enhance fine lines' is the culprit. Turn it off and the problem continues.

  Is this a bug or expected behaviour? Whatever it is, I find the effect harmful and not helpful. I'm leaving this option in the future.