Animations and bearings

Similar Questions

• Rub the animation and did not go constantly to find out if it syncs correctly

  (Note, I use Flash CS6. And as I have no idea where to put this discussion, I might as well make the note here)

  How to make it so that I can actually scrub through animation and without having to constantly make sure if it syncs correctly? I can't make it work for me. I do an animation, and it would be useful to at least try to match the sounds with the action instead of random guessing.

  You must set your sounds to flow on the timeline.

• Importing animations and videos-videos are important to small

  I was searching for an answer to my problem. I have a project with animations and video. When I matter my animations, photos and music is the perfect size. When I import my video it's small in the display screen. Very small. If I import on another project, it is important properly. I don't know how to change the setting of the sequence before importing the video, or if I can import the video with different parameters. Help, please

  Apparently you create your your forests of animation sequences, then adding videos later? What image size are they? PrPro creates a sequence with the settings according to the material in FLAC to an area empty timeline, so if say your animations are defined in 1920 x 1080 and your video is 1280 x 720 and you started with the animation first, PrPro would create a sequence of 1920 x 1080, and when you put the video on the timeline it will put in the small box in the Middle , but the size of 1280 x 720.

  Say your animations and still images are 4096 x 2304, if the size of the sequence that you will receive, and if your video is 1920 x 1080, once again, you will get a small video in what appears to be a box in the middle.

  Maybe you should check your sequence settings by right-clicking on a sequence, then select Properties... post a screenshot of this back here.

  And also... What are the dimensions in pixels of your video media, your photos and your animations? Sounds like you may need to set your sequence to match your video and maybe use 'set of sequence' for your entertainment & stills if they are no longer large width x height as your video clips.

  Neil

• Bad job first elements 10.0. I made a flash animation and has decided to add sound in first - Elements.It turned jerks. How to fix this error

  Bad job first elements 10.0. I made a flash animation and has decided to add sound in first - Elements.It turned jerks. How to fix this error

  Dear Sirs. I ask you to give special attention that the frame rate vidio input and output cannot exclude more than 1 frame, otherwise the image will shake and blurry text. It is preferable to use the HD 720 P 25 sincerely Mikhail Osipov

• I created an interactive navigation along the animated and imported and that the muse. Animations works very well, but does not have the interactivity. ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur

  I created an interactive navigation along the animated and imported and that the muse.
  Animations works very well, but does not have the interactivity.
  ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur comme il se doit),)
  Anyone have an idea how I can fix this problem?

  Hello

  As you use the edge with muse file you do not put the full URL.

  Please try the code below.

  Window.Open("..) /.. /arbeiten.html","_top");

  Concerning

  ViveK

• Problems in animation and the actions in epub

  Hi, I have problems to view animations and background of my epub actions, when I view all works with indesign, but in content adobe Viewer, I did not not if I forgot something in the settings of the document, does anyone know what happened?

  Native InDesign animations are not supported in DPS. Use border animate.

• play an animation and before moving on to a scene.

  Hello everyone, I'm new to Flash and I have a simple question:

  I created a game. Let's say I have a screen instructions and a game intro screen. The instructions screen has a back button that has a mouse more/click/out animation. I can get the mouse and more functionality, but so far all work that I could do when clicking the back button is to jump straight back to the intro of the game, without playing the animation click first. How to play the animation, and THEN go to a scene? Thank you. Here is my code in my "back" button symbol:

  import flash.events.MouseEvent;

  backButton.addEventListener (MouseEvent.MOUSE_OVER, handleMouseOver);

  backButton.addEventListener (MouseEvent.CLICK, handleMouseClick);

  backButton.addEventListener (MouseEvent.MOUSE_OUT, handleMouseOut);

  function handleMouseOver(e:MouseEvent) {}

  gotoAndPlay ("over")

  }

  function handleMouseClick(e:MouseEvent) {}

  gotoAndPlay ("click");

  }

  function handleMouseOut(e:MouseEvent) {}

  gotoAndPlay ("out")

  }

  On the Instructions maintimeline scene, here is my code:

  Stop();

  import flash.events.MouseEvent;

  backButton.addEventListener (MouseEvent.CLICK, handleBackClick)

  playButton.addEventListener (MouseEvent.CLICK, handlePlayClick)

  function handleBackClick(e:MouseEvent):void {}

  gotoAndplay (1, "Gameintro");

  }

  function handlePlayClick(e:MouseEvent):void {}

  gotoAndPlay (1, "Gameplay")

  }

  You need the call to the handleBackClick function to be triggered by the end of the animation of gotoAndPlay ("click"), is not clicking on it.

• What is a tween engine? I know basic scenario animation and generally make the web banner ads.

  What is a tween engine? I know basic scenario animation and generally make the web banner ads. Can I learn more about without being an ACE pro?

  I think they are third party plugins and reduce the size of the interpolations. Is it simple? Old school? Is motion guide, a better way to tween than that?

  Tween engines are collections of code used to create animations.  Examples of tweening engines would be TweenLite, Tweener, Tween Max, and I suppose there are others (not sure if Tweener is still there).  Flash has a built-in tweening engine called the Tween class... so it is something that you could start by just to get a taste for working with interpolation coded instead of the interpolation of the timeline.

  Since 'Interpolation' only research will probably show versions of the timeline... I suggest Google search using terms like 'Flash tutorial class Tween' to get some information on using the Tween class.  Once you have an idea of what it does, you might prefer to go the engines of interpolation of third parties who are supposed to be better performing implementations.

• Captivate 6 - Animations and review quizzes

  Hello!

  I recently downloaded the trial version of captivate 6. I really liked the look and feel of the software, including new features. I created a project and included animations and the question pool to check. I'm not able to take the solution for the following two issues:

  1. I inserted two files of animation on a slide by adjusting the timeline. When the project is published for the first time, the animation to run correctly. But later, after some changes in the slide, only a single animation is played. Could you please tell me what went wrong?

  2. I created pool question to the project. While in the process of revision Quiz, is it possible to consider only the slides that have received an incorrect answer. Is there any solution for this? If this is possible with any script, could you please post me that.

  Please help me. I will be thankful to you.

  Post edited by: Usha_2288

  Just published on my blog the workflow for your scenario. Take a look on:

  http://lilybiri.posterous.com/review-only-incorrect-slides-Captivate-6

  Lilybiri

• CS6 tool for animation and video?

  I use CS6 (mainly FW & DW but want to use others) to develop Web sites. I would like first of all to help (in the ' Cloud) other apps, but it takes time to learn and time is so limited that to use?

  I want to do more animation and video (using tools below to do a little now), but wants to focus on the best choice for all instead of having to learn all the new software.

  Used FL & PS some but am not competent with either. Looks like should I consentrate AE or MU maybe?

  FL & PS are both very intensive with steep learning curve. AE video makes it look a little more simple to learn and use, no?

  Your thoughts please!

  Thanks in advance.

  BA

  Hi, Robert,.

  For animimation, you can try After Effects.  If you are comfortable with the tools of Web site, you could also try edge Preview for animation.

  Muse is more about the overall website creation for designers than animation.

  Here are some good places to start learning:

  -After Effects for animation: Getting Started blog post from Todd Kopriva

  -Edge for HTML5 animimation: resources page with tutorials and lessons of product

  -Premiere Pro for video: tutorials video Learn Premiere Pro CS6 on Adobe TV

  If you want a self-study course, I recommend also these books and videos from Peachpit Press:

  -Classroom in a Book series

  -Learn video series

  Kirsti

  Community team help & Learning

• Tips for flash animation and audio

  Just wondering if someone could give me advice on the following:
  
  I have a partition of music in flash with a lively bar to show the position in the score during playback. The audio track is included in the flash file before that I have imported into Director.
  
  This is the best method to run audio and flash together or that run flash animation and audio track separately have all the advantages.
  
  concerning
  
  Andy
  

  Hi Rob

  Thanks for the info on SoundLevel - in fact, even though he is quite sure - will do the job.

  concerning

  Andy

• ANIMATIONS AND PICTURES ONLINE

  MY ANIMATIONS ONLINE AND FACEBOOK PHOTOS ARE NOT VISIBLE > I UPGRADED THE DRIVE FLASH, BUT NO CHANGE > WHAT CAN I DO? WINDOWS XP

  The Texan salvation,

  -How long have you had this problem?

  -What web browser do you use?

  -If you use Internet Explorer (IE), what version of IE are you using?

  If you use IE, follow the steps below:

  Method 1:

  Uninstall Adobe Flash Player, download and install the latest version of Adobe Flash Player and see if that fixes the problem.

  Method 2:

   

  Optimize Internet Explorer settings and check if this solves the problem.

  See How to optimize Internet Explorer

  Note: The article above is applicable to Windows Internet Explorer 7 and Internet Explorer 8.

  Disclaimer

  Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Animations and Image editing options

  Hi all

  I searched the Forum and could not find the following options for animations

  1. GIFs - some said GIF is not supported, but some were discussing workarounds. I asked if it worked for them. This option, I thought that if works, we can convert Flash files in gif and use.
  2. SME - I tried havn't. download the CDK. But saw a few entries on the forum, that we cannot modify the animation on the page.
  3. Flash - Flash did not support for the version earlier. But not safe for Storm taking in charge or not? Do we need to install Flash player separately. And I can integrate the flash file in the screen. Don't know what API should be used (if possible)
  4. SVG - Measurer of vector graphics. I could see some of the examples provided with the JDK.

  If I want to include an animated image on the screen which one of the above would be the best option.

  Also can I provide an API that can activate the edition image as cropping, adding effects and features like that. Editor of a pointer that will help me to image.

  Please provide your inputs.

  Thanks in advance,

  Sandeep

  The native mail application can't stand animated GIFs.  They can be seen in the BlackBerry browser or using the field of animated gif custom knoweldge base (link above).

  Mobile devices blackBerry do not support Flash.

• Can I create an animation and use it to a YouTube intro?

  I want to do a YouTube intro to my channel, go to start of all my videos. I want to know if I can create one in Adobe animate and place it at the beginning of videos during editing, for example in Windows Movie Maker or Adobe Premiere.

  Four notes to add to this that said this article...

  1. to do what you want to do with first, don't send by Adobe Media Encoder, use the MOV file that you get after making the export.

  2. the size of the stage and the video size may not be the same (although the report should be). When you export, you have an option to define how the video size will be. So, you could have an animation that is say 950 x 540, small enough to easily revise on a small monitor, and you can export only HD or even sizes of 4 K video.

  3. you can make your library assets be lossless, no reason to force them through JPEG. In addition, in the publication settings change the audio signal to be in Raw, 44.1 KHz, 16-bit stereo. Assuming you're including audio. If you do audio first start-up sequence, then the settings of FLA important step.

  4 put this in a layer in frame 1 of your timeline, it will significantly improve the quality of the video:

  internship. Quality = "best";

• Flash CS6: Jerky Animation and Photo appears distorted while dragging

  Hi people, I use Flash CS6 (don't have not upgraded to animate again). I use a lot of Adobe design products, but fairly new to Flash, even if I understand the basics of the timeline and such. I have two problems. I'm trying to set up a short animation 1920 x 1080 (30 sec) in which photographs soar since the center of the screen. As they soar, they largest zoom. Picture a flying Gallery. I have about 4 or 5 that do one after the other. I have implemented simple tween animation. In theory, it works fine, but when the image which was a PNG 150ppi of photoshop that I converted to a symbol, moves slowly outward and backstage looks jerky and slightly distorted. You can't even tell what looks like the person in the photo. I noticed when I upped the framerap from 24 to 100 (just for the experience), the image itself looked MUCH better and you can see during the whole movement, but the movement itself, the path has become choppier. In addition, to this framerate, I can't export to Quicktime due to the memory. I did a TON of animation in PowerPoint and Keynote over the years and I look forward to this kind of unpredictable be chopped of their trajectories and pre-sets, but Flash? My second problem is that no matter what I do, when I export as SWF, trial versions that were looking for clear and undistorted image during the movement seemed fine hen evenw (movement jaggedy always there) I enlarge the screen to fill to the top of my desktop screen iMac together... but when exporting quicktime If I enlarge them, the low resolution and pixelated picture looks. What should I set my file upi bigger than 1920Pixel by 1080 pixels? At the end of the day, we put this video on an intranet company for an event. The project manager wishes than the possibility of going 16:9 full screen on the users screen. Tips on how to make these movements and the image itself see without the rough, look distorted? And what kind of Framerate is my MAX if I know that it will eventually be converted by a third party and put it on the web? Thank you

  Exporting to video has become much better with a newer version of Flash you use. It would be the only practical way to get smooth cs6, a large and complicated scene animation, to export a sequence of images.

  With Animate, when you try it, you can export any animation complexity, at any frame rate and get a perfect cadence.

  Which hand, make sure that you have defined your bitmaps in the library to be Lossless and allow smoothing. Also, make sure that the quality of the scene is set for a better default (in the middle). You can place this script in frame 1, and it will improve the motion a lot:

  internship. Quality = "best";

  With CS6 that above the line will make the standard export movie be even choppier, but as I said, to do a sequence of images to CS6 in order to obtain the expected pace.

  Once you have exported perfect MOV you can then use Adobe Media Encoder to try different settings to do a MP4 is a more practical file size.