Another question on the exception of 'Port of SMS already use' in
I found a lot of discussion about the exception 'SMS Port already use' in. My question is this:. Say an application opens a port SMS and ends abnormally without closing. The unit will continue with the exception of 'Port of SMS already in use' up to reset the signal? is there a way to clean the orifice opened without a reset of the device?
I need to listen to a specific port and from what I've read, even the datagram method allows one connection.
Hi scoleman2272
This KB article explains how to use the connection of datagram. This works for listening, the reverse is also true however for sending.
I hope this helps.
Concerning
Tags: BlackBerry Developers
Similar Questions
-
Yes, another question regarding the freezing of Safari - EtreCheck report included
Yes, another question regarding the freezing of Safari.
From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.
I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.
Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.
Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.
Thank you in advance.
Ben
-----------
EtreCheck version: 2.9.11 (264)
Report generated 2016-04-28 22:48:58
Download EtreCheck from https://etrecheck.com
Time 05:45
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Click on the link [check files] help with unknown files.
Problem: Apps are broken
Description:
Safari freeze when opening new tabs / switching between the tabs.
MacBook Pro (15-inch, mid 2009)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro5, 3
1 2.66 GHz Intel Core 2 Duo CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1067 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = battery check - Cycle count = 389
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1440 x 900
NVIDIA GeForce 9600M GT - VRAM: 256 MB
OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour
FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GS23N)
Built-in ISight from Apple Inc..
Card reader Apple
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Mac App Store and identified developers
~/Library/LaunchAgents/com. GoodShop.updater.plist
~/Library/application support/GoodShop/updater
A unknown file found. [Check files]
/ Library/Application Support/Symantec/virus
[no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]
/ Library/Extensions
[no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]
[loading] expressvpn.tun (20150118 - 2016-04-12) [Support]
/ System/Library/Extensions
[no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]
com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]
com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]
com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]
CMA: path: / Library/StartupItems/cma
RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon
Startup items are obsolete in OS X Yosemite
[loaded] 8 tasks Apple
[loading] 165 tasks Apple
[operation] 65 tasks Apple
[loaded] 45 tasks Apple
[loading] 161 tasks Apple
[operation] 83 tasks Apple
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]
[operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]
[loading] com.epson.esua.launcher.plist (2015-06-29) [Support]
[operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]
[loading] com.google.keystone.agent.plist (2016-03-01) [Support]
[operation] com.mcafee.menulet.plist (2016-03-23) [Support]
[operation] com.mcafee.reporter.plist (2016-03-23) [Support]
[loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]
[operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]
[operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]
[loading] com.adobe.fpsaud.plist (2016-04-15) [Support]
com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]
[loading] com.expressvpn.tap.plist (2016-01-27) [Support]
[loading] com.expressvpn.tun.plist (2016-01-27) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-01) [Support]
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]
[operation] com.mcafee.cspd.plist (2015-05-08) [Support]
com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]
com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]
[operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]
[loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]
[loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]
[loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]
[loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]
[loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]
[operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]
[loading] com.symantec.navapd.plist (2009-09-14) [Support]
[loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]
[operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]
[operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]
[operation] com.symantec.symdaemon.plist (2009-03-27) [Support]
[operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]
com [running]. GoodShop.updater.plist (2013-09-24) [Support]
[loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]
[failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Application of Google Reader (Google Drive.app/Applications /)
Dropbox application (/ Applications/Dropbox.app)
ExpressVPN application (/ Applications/ExpressVPN.app)
CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)
[ongoing] com.DYMO.pnpd
[ongoing] com.getdropbox.dropbox.83552
[ongoing] com.google.GoogleDrive.81632
[ongoing] com.macpaw.CleanMyMac3.Menu.80672
[ongoing] com.mcafee.ssm.ScanManager
[ongoing] com.mcafee.virusscan.ssm.ScanFactory
[loading] 420 tasks Apple
[operation] 193 tasks Apple
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Default browser: 601 - SDK 10.11 (2016-04-18)
Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]
DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]
QuickTime Plugin: 7.7.3 (2016-04-12)
Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
iPhotoPhotocast: 7.0 (2010-11-15)
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]
SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]
SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]
JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)
Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)
GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)
SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)
PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)
Flash Player (2016-04-15) [Support]
Flip4Mac WMV (2012-05-15) [Support]
Growl (2015-09-16) [Support]
Java (2016-04-18) [Support]
Norton\nQuickMenu (2010-11-16) [Support]
Trusteer Endpoint Protection (2016-04-18) [Support]
Time Machine not configured!
5% WindowServer
1% kernel_task
0% fontd
0% SymDaemon
Top of page process of memory: ⓘ
445 MB kernel_task
Mdworker (18) 430 MB
164 MB Google Reader
Dropbox 123 MB
VShieldScanner (4) 66 MB
106 MB free RAM
4.15 GB used RAM (770 MB cache)
6 MB used Swap
April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash
com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck
28 April 2016, 22:21:42 self-test - spent
April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash
April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash
April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash
April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash
/Library/rapport/*/rapportd.app/Contents/MacOS/rapportd
April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]
/ System/Library/CoreServices/SubmitDiagInfo
April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang
April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang
April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash
April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]
/ Applications/Airmail 2.app/Contents/MacOS/Airmail 2
26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang
Remove all apps viruses you have
Symantec, McAfee, Norton...
CleanMyMac3
-
Another question on the activation of Java...
Sorry for you ask same question from others, but the responses I've read are not useful for me.
Problem: Plugin Java not detected (topic: plugin) in my Firefox 10.0.6
1.7.0_05 Java installed. Java Console open normally.
symlink checked with readlink command:
./usr/Java/jre1.7.0_05/lib/amd64/libnpjp2.soUsing Red Hat Enterprise Linux Server v6.3 (64-bit).
No indication of what makes me mad?
Thank you!
The normal version of Firefox 1.0.6 is a 32-bit version,
You will need to install a 32-bit version of Java and to place a symbolic link to the 32-bit libnpjp2.so in a place where Firefox scans for plugins.
-
question of the exception!
Hello gurus,
Here is the exception...
Regarding understanding will...EXCEPTION WHEN others THEN RAISE_APPLICATION_ERROR (-20900, 'mov_tbl1' || ' - ' || 'Error: ' || to_char(SQLCODE) || '-' || to_char(SQLERRM));
I believe " whenever others error then it raises with 20900 error and dispalys message as "mov_tbl1 error: 20900" {code} if i m wrong ...please correct me ....what will be the display message ??? Thank you!!
Hello
RAISE_APPLICATION_ERROR (-20900, 'mov_tbl1' || ' - ' || 'Error: ' || to_char(SQLCODE) || '-' || to_char(SQLERRM));
Means
-20900 the actual error NUMBER and indicate the error number 20900
Add it with the word move_tb1 - ERROR: real error code: error message itself;To actually see how it would look run the following piece of code
-- Created on 2/24/2010 by BHUSHAN declare -- Local variables here i integer; begin -- Test statements here SELECT 'a' INTO i FROM dual; eXCEPTION WHEN others THEN RAISE_APPLICATION_ERROR (-20900, 'mov_tbl1' || ' - ' || 'Error: ' || to_char(SQLCODE) || '-' || to_char(SQLERRM)); end;
See you soon!
Bobin -
Questions about the functionality of callback and SMS?
You must first create a background application. Therefore extend the Application class. Then, you already said you use persistence. DateTimeUtilities comes in very handy when handling / comparison of DateTime. Then implement the RealTimeClockListener that is raised every minute to check if the date is a specific date in your persistence. Or you can use TimerTask and trigger every hour or every 24 hours. To warn the user of your application to background:
synchronized(Application.getEventLock()){ UiEngine ui = Ui.getUiEngine(); Screen screen = new Dialog(Dialog.D_OK, "Look out!!!", Dialog.OK, Bitmap.getPredefinedBitmap(Bitmap.EXCLAMATION), Manager.VERTICAL_SCROLL); ui.pushGlobalScreen(screen, 1, UiEngine.GLOBAL_QUEUE); }
-
Another Question regarding the IPC in the BB platform (secure process for RuntimeStore)
In my scenario,.
Process one will constantly be voicemails from somewhere and put it in a table in a RuntimeStore, named _store.
B process, there is a thread T will waitFor the ID of the table in the _store. If succeeds, then copy to another location, i.e.,.
persisting an object and then eaten after this, the thread will remove the ID of the table in the _store.
I wonder if it is safe for both processes simultaneously access the _store.
Wrote in the store. B is read and write to the store.
If someone could help? Very well appreciated.
I am a bear with very little brain and can never remember the right way of doing things. I'm sure that someone will take the holes in what follows and suggest the best ways and it would be fantastic.
I think there are two issues here:
(a) simultaneous access
(b) persistence
(a) the simultaneous access to an object in the persistent store are no different from any object, they are located in PersistentStore, RuntimeStore or RAM.
Thus, for example, let's say we have a vector in PersistentStore, we use just like a queue to a single server (then only add to the tail and remove the head), with a separate 'lock' in RuntimeStore object. Synchronize us on the lock object before we add an element, or remove an item, our access is perfectly safe
(b) persistence
Yes I agree, this aspect is not clear. I always thought I want to commit an object placed partially updated, so in this example, would make the validation in the context of add or remove the treatment.
Of course, things become a little more complicated if you start to talk about data updated in the queue, but I do not think that these problems are related to PersistentStore as a result, I think that these are issues of a general nature and there is probably many places on the web where are discussed different mechanisms to make sure that it works well.
A few other points:
(1) I understand that the treatment of validation is "atomic" on the BlackBerry and the "wound", so if you make an object you will persist all changes to this object. Usually, I maintain a collection that is associated with an Application for validation, points specific in the treatment of requests to ensure that the data associated with an application conform to the battery be fired immediately after a commit.
(2) you can see updates of persistent objects, even if they are not posted. These changes will be lost if they are not posted. So if you have a line like the one above, and two Clients add entries in the queue without committing, the server see the two entries in the queue until the battery is removed. When the server restarts, the two went.
Does that answer the question?
-
Another question on the appeal of a Web Form to a form of Client-Server
Thanks to this forum, I was able to get my Client-Server (6i) form to call a Web Form and pass it a parameter. Unfortunately, this code displays the user name and password in the Internet Explorer address bar. Although not critical, I would like to delete the user name and password to be visible. I am able to do this in the Web form code below because it calls JavaScript that will hide the address bar - but the WEB. Function SHOW_DOCUMENT is not available in the form of Client-Server.
So my question is whether it is possible to convert the code 'Customer Forms Server' below which is called my Web form using similar JavaScript functionality that is present in the 'Web Forms Code' example below? I want the server code to use the javascript functionality because I want to hide the address bar (which currently shows the users Username and Password).
Code client server Forms (able to use when you call this a form of Client Server Web form):
CL: = "cmd /c start iexplore.exe" http://9.35.32.205:7777/forms/frmservlet? " pageTitle = trial email Reporting & config = TTMSMENU & form=./forms_test/TrialMailReporting & otherparams = p_prospect = X 110679 & userid =' | the user | » /'|| GET_APPLICATION_PROPERTY (PASSWORD). » @' || : overall. DB_Instance |' » ' ;
host (cl);
Web Forms Code (able to use when you call this Web to another Web form form):
WEB. SHOW_DOCUMENT ("JavaScript: void (window.open ("http://'|| ") ip_port | "/ forms/frmservlet? pageTitle = dropper E/M & config = TTMSMENU & form=./forms_test/TrialMailReporting & userid =' | the user | » /'|| GET_APPLICATION_PROPERTY (PASSWORD). » @' || : overall. (("DB_Instance |'", "", "resizable = Yes, location = no, Toolbar = no, MenuBar = no, Status = no,")); self. Close () ',' _blank');
Any help would be greatly appreciated!
Published by: Buechler on April 8, 2009 15:57Looks like Forms 6i PL/SQL version does not correctly convert to hex.
That's what you can do:
Create a db stored functionCREATE OR REPLACE FUNCTION to_hex (p_string VARCHAR2) RETURN VARCHAR2 IS v_hex VARCHAR2 (1000); BEGIN FOR i IN 1 .. LENGTH (p_string) LOOP v_hex := v_hex|| '%' || LTRIM (TO_CHAR (ASCII (SUBSTR (p_string, i, 1)), 'XX')); END LOOP; RETURN v_hex; END;
cl := 'cmd /c start iexplore.exe "http://9.35.32.205:7777/forms/frmservlet?pageTitle=Trial Mail Reporting&config=TTMSMENU&form=./forms_test/TrialMailReporting&otherparams=p_prospect=X110679&userid='||to_hex(v_conn)||'"';
-
Another question on the T510 restoration after an another installed sys
Hello guys,.
I tried to read this forum through several times in order to find the answer, but still not able to get my work from the laptop.
I installed Win8 instead of manufactured Win7, then killed an option to use the ThinkVantage button as I see it.
Sheet music: Lenovo_Recovery and SYSTEM_DRV (could be something appeared after) are still there.
RnR downloaded, shows - error 6.
None of the restore or backup discs.
The question here is - can I still use this partition for something and somehow restore from there?
Would appreciate any help here.
IIRC, there was a WIM environment that was on SYSTEM_DRV which was the rescue of the recovery and the recovery environment. You may need to add an entry to BCD for this... somehow. No idea how to do it with Windows 8.
-
Question of the 6248P fiber port legacy.
Hello
I inherited two switches 6248P outgoing Manager (I arrived after his departure) and would like to know if the switch can add a port for a 10GBASE-SR fiber connection. One of the switches is in place and in the course of execution attached to a 3COM older who manages currently one end of the fiber and the second unit was still in the box but has a Module SFP + 10GE (2-port) plugged into the back of it.
Is - this module fiber or cable? Is it possible to get the fiber for this device? And what role do we need?
Any help is appreciated.
Page 11 of this document shows different switches 62xx expansion modules.
i.dell.com/.../Expansion-Modules-for-Dell-PowerConnect-Switches-January2012.pdf
Page 59 of the user guide also talks expansion modules.
FTP.Dell.com/.../PowerConnect-6248p_User%27s%20Guide_en-US.pdf
It looks like the module you have.
accessories.dell.com/.../PopupProductDetail.aspx
It provides 2 SFP + ports capable of supporting optical transceivers 10 G-BaseSR, BaseLR - 10 G and 10 G - BaseLRM. In addition, it also supports Active and Passive Direct Attach Copper cables SCXI.
I hope this information helps.
Thank you
-
BlackBerry smartphones another question concerning the size of microSD for bb8310 max
Hi all...
I'm such a wet behind the ears starting the bb8310, even very specific graphs given in a previous post raises questions for me.
The table that was given:
BlackBerry Device Software 4.2.0 - up to 2 GB
BlackBerry Device Software 4.2.1 - Up to 4 GB
BlackBerry Device Software 4.2.2 - Up to 4 GB
BlackBerry Device Software 4.3.0 - up to 8 GB
BlackBerry Device Software 4.5.0 - up to 8 GB
BlackBerry Device Software 4.6.0 - up to 16 GBUnder options > advanced options > applications, my bb8310 says:
Basic BB 4.2 applications
System BB 4.2 software
then the rest of the list as an attachment service, Messenger, video, brickbreaker, browser, notebook, etc., etc., all say bb 4.2.2.
My BlackBerry 8310 is brand new... since yesterday... why would I receive a 4.2 old BONES?
So... what I can run a 4 GB, or am I limited to 2 GB?
Do you give such a concrete response,
JO
Hello
If you plan to upgrade the operating system as soon as it comes out, you can save yourself money,
Install the card 8 GB, the BB will recognize only 4 MB, due to your current operating system. When you upgrade,
the full 8 GB will be recognized. It's that you have to buy a memory card.
Please let me know if it helps!
Thank you
If you have any other questions please ask!
If this is not the case, adjust the position by checking the post that answered your question!
Thank you very much!
-
Another question on the selection of new PC
I found that the HPE H8M series is a better deal than the other PC I was looking at.
(P7z and PZxt)
My question is if I add the optional nvidia GT 530 (2 GB) video card will be the appropriate standard 300 watt PSU?
They will improve the PSU or do I ask more?
This PC has 6 GB of RAM, processor 840 4 core phenom xt
Thanks in advance
Looks like the same thing again... Seems you will get a power of 300w with this computer regardless of the video card. No real difference between this and other computers.
Frank
-
Another question about the redesign or the future of
Hello
When you read a topic about the removal of 'Preview' of the name of the software, staff responded that Adobe sought to 'take the best features of reflow and their integration into other tools.
We are currently looking to use reflow as befits our very good business model. Currently, use us Photoshop for Desktop models, but is not a preview of the designs with versicles mode, which is exactly what reflow.
It lacks some details of Photoshop, like ToolTips, detailing the size in pixels of the area being created and being able to move groups elements of item with the keys - we are likely to see the reflow being improved to include these, or the app that may disappear?
I left a question in an above section if breakpoints for various devices would then appear in Photoshop if the statement made by the staff of Adobe had to happen, but had no response (I assume that this is always decided on?).
Please let me know where we are until we invest time in structuring around these applications.
Thank you
Hi Ben,
The honest answer is that Adobe is unlikely to make all invest more in the characteristics of reflow. I don't know about the future PS feature, so I can't comment on those. I don't know that the PS is invest in their space of design focused on the web, UX and mobile designers, so you could make requests about features he. Here is the forum:
Photoshop Design space (overview)
Thank you
Joan Lafferty
Product Manager
-
Yet another question on the planning of the CPU
Hello!
CPU Scheduling is one of those endless, and although I read a lot about it, I found different answers to the same question. Moreover, this is the last document on this subject and recommended... read http://www.VMware.com/files/PDF/Techpaper/VMware-vSphere-CPU-Sched-perf.PDF .
Is it possible to run 2 virtual machines at the same time in the same logical processor? Very basic question, I'll appreciate any response and if it has links to the official documentation, even better!
Kind regards
elgreco81
Ah, I think I see the confusion. There is no such thing as using a fraction of a nucleus within a single cycle. You CAN use all of a nucleus for a fraction of the total cycles over a period of time, but a physical core is busy or idle. There is no in-between, especially since we are ignoring hyperthreading in this example.
All of a core to aid for a fraction of the total time in a given sampling period, is what gives the illusion of the use of 'part' of a core. Split in fact one heart in this way would require States and the architecture that simply do not exist in the x 86 world.
Note that in the article by Frank Denneman he calls specifically free cycles "shopping on ' Planner. In your example, there will be always 1 free cycle at any time. There are 1000 cycles per second in your original example, and many of these cycles may be free, but there is never more than one at a time.
To say things, otherwise, you cannot use all 1000 MHz in the first millisecond.
The paragraph you cited in the guide to management resources assumes a Jepp 2 GHz. keep in mind that any measure of frequency REQUIRES a time interval. There is no literal split 'given time' is implied here. What they're saying is that if over a certain period of time, say a second, VM1 only consumes 500 cycles and ask no more, then VM2 is welcome to help itself to one of the unused 500 cycles initially entitled to VM1, and cycles of 1000 that VM2 was already entitled.
I would like to know if there is still no ambiguity, or whatever it is that I does not really there.
-
Another question about the display of out parameters
I put a ref cursor in my procedure and used variable bind. If I trace through the procedure using the debugger in sql navigator I see the variable values of the print output, but they still have empty values. What should I do to show them now. It's my current procedure:
PROCEDURE Retrieve_Item_And_MeasureUOM
(
-parameters passed in
p_wr_item_oid in NUMBERS
p_wr_measure_oid in NUMBERS
p_measure_uom OUT VARCHAR2,
p_report_item_measure_uom OUT VARCHAR2,
p_report_ref1 ON ref_cur
)
As
-local variables
v_sql1 varchar2 (500): = ";
v_report_name varchar2 (200): = "reportname";
v_wr_item_oid NUMBER;
v_measure_oid NUMBER;
v_report_item_measure_uom VARCHAR2 (50);
v_measure_uom VARCHAR2 (50);
BEGIN
v_sql1: =.
"SELECT."
FM.wr_item_oid, fm.wr_measure_oid, fm.default_display_uom as Report_Item_Measure_UOM,
m.Default_UOM_App_Code as Measure_UOM
Of
wr_form_measure fm
JOIN IN-HOUSE
m wr_measure ON m.wr_measure_oid = fm.wr_measure_oid
WHERE
FM.wr_item_oid =: itemoid and fm.wr_measure_oid =: measure_oid AND
FM.wr_form_oid =' | Retrieve_FormOID_From_Name (v_report_name);
PUT_LONG_LINE (v_sql1);
P_report_ref1 OPEN for v_sql1
With the HELP of p_wr_item_oid, p_wr_measure_oid;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RAISE_APPLICATION_ERROR (-20999, "no data found. Possible error in the form OID.') ;
END Retrieve_Item_And_MeasureUOM;
Thanks againSince you ask again I'll answer again. I have replyied to your other post that is answered.
CREATE OR REPLACE PROCEDURE retrieve_item_and_measureuom ( -- parameters passed in p_wr_item_oid IN NUMBER, p_wr_measure_oid IN NUMBER, p_measure_uom OUT VARCHAR2, p_report_item_measure_uom OUT VARCHAR2 ) AS -- local variables v_wr_item_oid NUMBER; v_measure_oid NUMBER; BEGIN SELECT fm.wr_item_oid, fm.wr_measure_oid, fm.default_display_uom AS report_item_measure_uom, m.default_uom_app_code AS measure_uom INTO v_wr_item_oid, v_measure_oid, p_report_item_measure_uom, p_measure_uom FROM wr_form_measure fm INNER JOIN wr_measure m ON m.wr_measure_oid = fm.wr_measure_oid WHERE fm.wr_item_oid = p_wr_item_oid AND fm.wr_measure_oid = p_wr_measure_oid AND fm.wr_form_oid = retrieve_formoid_from_name (v_report_name); EXCEPTION WHEN NO_DATA_FOUND THEN raise_application_error (-20999, 'No data found. Possible error in Form OID.' ); WHEN OTHERS THEN raise_application_error (-20998, SQLERRM ); END retrieve_item_and_measureuom;
Published by: Marcus AFS on February 24, 2010 15:16
-
Yet another question about the update with the shutters tab
I am quite new to this, but I've been scouring the boards and try many different things, and I decided to ask for advice.
There are other threads similar to my problem such as:
I have a set up tabbed pane based on the example and everything works fine until I have delete a line from a VerticalFieldManager. It is by default the focus on the first item on the screen, and I get this. My problem is trying to substitute or replacement behavior.
My screen implements the FocusChangeListener for the buttons on the tab (custom LabelFields).
I tried many different variations - I tried to manage the update completely manual and ended with a bit of a mess. I tried to capture the event navigationUnclick() and coding of the focusChanged() method to manually switch the update, but it seems that the focusChanged() method is called before the focusChanged(), which doesn't help me.
As I said I am pretty new to this so I could do something very stupid, but I don't really understand the focus handling implementation. A kick in the right direction would be appreciated.
Thank you.
You can have a NullField in your managers before all other areas - in this way, even if you delete the rest, the NullField might keep the focus.
If this does not help, try the substitution of sublayout for your managers, call super.sublayout and then explicitly setFocus to your NullField (the deletion of any field causes a display Manager to rearrange).
Maybe you are looking for
-
Hello I have a macbook pro (17-inch, mid 2010) 2.66 GHz Intel Core i7 and I'm under Beta Sierra 10.12.1. Recently I noticed that my speakers are extremely low. With headphones it's correct, but without, I need the room to be completely silent - not
-
Factory reset is not possible Acer Predator G3-605
I want to reset my PC to factory settings, but I am unable to do so at the present time as the erecovery management program is not on my computer. My PC has used the option to reset windows 10 for unknown reasons, and now all the files and programs a
-
Bluetooth file transfer has a limit of file?
Hello! Whenever I want trabsfer any file via Bluetooth, I right click on the Bluetooth in the notification area icon and select 'receive a file '. Can I send a file from my Bluetooth enabled mobile. Small files (less then 300 KB) are transferred, but
-
BlackBerry Smartphones BlackBerry does not connect
Hello. I have a BlackBerry 8520 I try to use with the Touch & Go-system Toyota. My problem is: whenever I take the key, and the connection is complete, the connection cannot be established automatically when I start the car. It must be done manually.
-
Using CC on several computers (4)...
I have my main rig in the studio - and need CC top to work.I also have my laptop travel - I CC on, in case I need to work in the field.BUTAt home, I have a power PC in the loft desktop computer and another laptop in the living room.Can I install CC o