Another question quick eclipse

Similar Questions

• Yes, another question regarding the freezing of Safari - EtreCheck report included

  Yes, another question regarding the freezing of Safari.

  From a little over a month (I think), Safari started freezing regularly whenever I want to open new tabs or switch between tabs. I found myself to leave the program several times per day / hour. I can't identify any specific common cause (other than my MacBook being old) or any new software or updates that might have initiated the question. At first I thought he might have many tabs, I tried to open, but recently it happens even with only a few tabs open.

  I worked through the steps I found in this forum and others: empty the cache, start in safe mode, etc nothing works.

  Based on the previous suggestions, I have downloaded and run EntreReport which I included below. The note and maybe just a distraction, but EntreReport has crashed three times tonight, before he was able to produce the sub report. I ran the report after restarting my system with no other programs running.

  Suggestions are welcome at this stage because I want to start using Chrome or Firefox because I like the transfer procedure between my devices.

  Thank you in advance.

  Ben

  -----------

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-28 22:48:58

  Download EtreCheck from https://etrecheck.com

  Time 05:45

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Apps are broken

  Description:

  Safari freeze when opening new tabs / switching between the tabs.

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 3

  1 2.66 GHz Intel Core 2 Duo CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 389

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  NVIDIA GeForce 9600M GT - VRAM: 256 MB

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  FUJITSU MJA2320BH FFS G1 disk0: (320,07 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 319,21 go-go (54,93 free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  HL-DT-ST DVD - RW GS23N)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Card reader Apple

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  ~/Library/LaunchAgents/com. GoodShop.updater.plist

  ~/Library/application support/GoodShop/updater

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/Symantec/virus

  [no charge] com.symantec.kext.SymAPComm (11.1.2f17 - 2015-05-23) [Support]

  / Library/Extensions

  [no charge] expressvpn.tap (20150118 - 2016-04-12) [Support]

  [loading] expressvpn.tun (20150118 - 2016-04-12) [Support]

  / System/Library/Extensions

  [no charge] com.DYMO.usbprinterclassdriver.kext (1.1 - SDK 10.9-2016-04-12) [Support]

  com.Silex.driver.sxuptp [no charge] (1.5.1 - 2016-04-12) [Support]

  com.symantec.kext.internetSecurity [no charge] (1.3.2 - 2016-04-12) [Support]

  com.Symantec.kext.IPS [no charge] (3.2 - 2016-04-12) [Support]

  Startup items: ⓘ

  CMA: path: / Library/StartupItems/cma

  RosettaStoneLtdDaemon: Path: / Library/StartupItems/RosettaStoneLtdDaemon

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 165 tasks Apple

  [operation] 65 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 161 tasks Apple

  [operation] 83 tasks Apple

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-28) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-31) [Support]

  [operation] com.epson.Epson_Low_Ink_Reminder.launcher.plist (2015-01-19) [Support]

  [loading] com.epson.esua.launcher.plist (2015-06-29) [Support]

  [operation] com.epson.eventmanager.agent.plist (2014-09-21) [Support]

  [loading] com.google.keystone.agent.plist (2016-03-01) [Support]

  [operation] com.mcafee.menulet.plist (2016-03-23) [Support]

  [operation] com.mcafee.reporter.plist (2016-03-23) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2013-11-14) [Support]

  [operation] com.symantec.uiagent.application.plist (2010-11-16) [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-31) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-31) [Support]

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  com.DYMO.pnpd.plist [no charge] (2014-10-16) [Support]

  [loading] com.expressvpn.tap.plist (2016-01-27) [Support]

  [loading] com.expressvpn.tun.plist (2016-01-27) [Support]

  [loading] com.google.keystone.daemon.plist (2016-03-01) [Support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-18) [Support]

  [operation] com.mcafee.cspd.plist (2015-05-08) [Support]

  com.mcafee.ssm.ScanFactory.plist [no charge] (2016-03-16) [Support]

  com.mcafee.ssm.ScanManager.plist [no charge] (2016-03-16) [Support]

  [operation] com.mcafee.virusscan.fmpd.plist (2016-03-22) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2013-11-14) [Support]

  [loading] com.symantec.MissedTasks.plist (2009-11-10) [Support]

  [loading] com.symantec.Sched501 - 1.plist (2014-08-27) [Support]

  [loading] com.symantec.Sched501 - 4.plist (2015-01-08) [Support]

  [loading] com.symantec.Sched501 - 5.plist (2015-01-08) [Support]

  [loading] com.symantec.avscandaemon.plist (2009-10-10) [Support]

  [operation] com.symantec.diskMountNotify.plist (2009-09-14) [Support]

  [loading] com.symantec.navapd.plist (2009-09-14) [Support]

  [loading] com.symantec.navapdaemonsl.plist (2009-11-14) [Support]

  [operation] com.symantec.sharedsettings.plist (2009-07-22) [Support]

  [operation] com.symantec.symSchedDaemon.plist (2009-11-10) [Support]

  [operation] com.symantec.symdaemon.plist (2009-03-27) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

  User launch officers: ⓘ

  com [running]. GoodShop.updater.plist (2013-09-24) [Support]

  [loading] com.adobe.AAM.Updater - 1.0.plist (2015-10-25) [Support]

  [failure] com.facebook.videochat. [entrenched passage] .plist (2014-08-09) [Support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-04-25) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Application of Google Reader (Google Drive.app/Applications /)

  Dropbox application (/ Applications/Dropbox.app)

  ExpressVPN application (/ Applications/ExpressVPN.app)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Other applications: ⓘ

  [ongoing] com.DYMO.pnpd

  [ongoing] com.getdropbox.dropbox.83552

  [ongoing] com.google.GoogleDrive.81632

  [ongoing] com.macpaw.CleanMyMac3.Menu.80672

  [ongoing] com.mcafee.ssm.ScanManager

  [ongoing] com.mcafee.virusscan.ssm.ScanFactory

  [loading] 420 tasks Apple

  [operation] 193 tasks Apple

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  Default browser: 601 - SDK 10.11 (2016-04-18)

  Flip4Mac WMV Plugin: 2.4.4.2 (2012-12-25) [Support]

  DYMO Safari Addin: Unknown - SDK 10.9 (2014-10-26) [Support]

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-09-16) [Support]

  QuickTime Plugin: 7.7.3 (2016-04-12)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-25) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  iPhotoPhotocast: 7.0 (2010-11-15)

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-11) [Support]

  SharePointBrowserPlugin: 14.3.0 - SDK 10.6 (2013-02-09) [Support]

  SiteAdvisor: 2.0 - 10.1 SDK (2015-03-30) [Support]

  JavaAppletPlugin: Java 8 updated 77 03 (2016-04-18) check the version of build

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-03-30)

  Add to wishlist Amazon - Amazon.com - http://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2011-07-09)

  GoodShop - GOODSEARCH LLC - http://www.GoodSearch.com (2013-09-24)

  SiteAdvisor - McAfee - http://www.siteadvisor.com (2015-09-28)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-03)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-15) [Support]

  Flip4Mac WMV (2012-05-15) [Support]

  Growl (2015-09-16) [Support]

  Java (2016-04-18) [Support]

  Norton\nQuickMenu (2010-11-16) [Support]

  Trusteer Endpoint Protection (2016-04-18) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% WindowServer

  1% kernel_task

  0% fontd

  0% SymDaemon

  Top of page process of memory: ⓘ

  445 MB kernel_task

  Mdworker (18) 430 MB

  164 MB Google Reader

  Dropbox 123 MB

  VShieldScanner (4) 66 MB

  Virtual memory information: ⓘ

  106 MB free RAM

  4.15 GB used RAM (770 MB cache)

  6 MB used Swap

  Diagnostic information: ⓘ

  April 28, 2016, 22:42:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-224212_[redacted].crash

  com.etresoft.EtreCheck - /Applications/EtreCheck.app/Contents/MacOS/EtreCheck

  28 April 2016, 22:21:42 self-test - spent

  April 28, 2016, 19:49:12 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194912_[redacted].crash

  April 28, 2016, 19:47:10 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-194710_[redacted].crash

  April 28, 2016, 19:38:58 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-28-193858_[redacted].crash

  April 28, 2016, 19:04:58 ~/Library/Logs/DiagnosticReports/rapportd_2016-04-28-190458_[redacted].crash

  /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

  April 28, 2016, 06:06:59 /Library/Logs/DiagnosticReports/Safari_2016-04-28-060659_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  April 28, 2016, 12:48:04 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2016-04-28-004804_[redacted].cpu _resource.diag [details]

  / System/Library/CoreServices/SubmitDiagInfo

  April 27, 2016, 22:01:10 /Library/Logs/DiagnosticReports/Safari_2016-04-27-220110_[redacted].hang

  April 27, 2016, 21:57:37 /Library/Logs/DiagnosticReports/Safari_2016-04-27-215737_[redacted].hang

  April 27, 2016, 19:05:50 ~/Library/Logs/DiagnosticReports/EtreCheck_2016-04-27-190550_[redacted].crash

  April 27, 2016, 06:57:28 ~/Library/Logs/DiagnosticReports/Airmail 2_2016-04-27-065728_ .crash [deleted]

  / Applications/Airmail 2.app/Contents/MacOS/Airmail 2

  26 April 2016, 19:48:11 /Library/Logs/DiagnosticReports/Safari_2016-04-26-194811_[redacted].hang

  Remove all apps viruses you have

  Symantec, McAfee, Norton...

  CleanMyMac3

• Another Question... Pasted the first album... but does not work properly

  Hello-

  Another question - I stuck my first file (wpa without loss) from the album on my rocket and when I go to him, he travels only (so 1,2,3, etc. and then it again.)  The songs look like they have any length, if that makes sense.  The bottom bar is from 0:00 0:00.  The strange thing is the player will play all music pre-loaded there, and when I tried to copy a song the player on the computer off, he played.  It is therefore not the file of the song itself I guess.

  What I've done wrong? And how to fix it?

  Thank you very much!!  This forum is very useful for a beginner!

  WMA Lossless is not a supported audio format. Which means that it won't work. You will need to re-Ripper in plain ' ol .wma, .mp3, .ogg or .flac format.

• Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if the make

  Hi ya'll! I'm still learning how to navigate my way with Lightroom. (Last time I wrote, I got a few responses that work.) Thank!) Now, I have another question. When I try to copy photos to my external hard drive to a CD/DVD, no matter if do leave LR or my car, I get the message; "Disc burning is not supported by LR on this computer." I've tried everything I can think of, so, I thought I'd see if anyone can find out if there is something I can do. Or could it be that my computer just can't handle it? Help! So frustrating!  I have a Lenovo PC, I don't know if that makes a difference. Any ideas? Thanks a lot for your help!

  You burned discs with other programs using this computer? Are you sure that you have a drive that will burn the disks?

• Another question about Dates

  Hi, I have another question regarding the use of the field date in Adobe Designer 8.  I have the updated domain in place so that the person can enter the date, lets say, 12/12/11 and it will convert to December 12, 2011, or, the user can click on the calendar that is attached to the date field and make a date selection.  My question is this.  Is there a way that can not only the calendar go to any date by selecting < or >, but can also go to an exercise < < or > >?  We have contracts that extend from 2 to 3 years and want this option to be available.

  Thanks for any help you can provide.

  Here is how I currently have my date fields in place.

  In the field section:

  View model: MMMM D, YYYY

  Edit pattern: M-D-AA

  Section of the value:

  MMMM D, YYYY

  Date must be entered as per example, 12 January 2012

  Liaison section:

  MMMM D, YYYY

  The calendar widget allows you to select other years.

  When you open the calendar, click on the name of the month, the calendar will show you every month of the current year.

  When you then click on the year, it shows you all the years of the current decade.

  

• Another question of novice!

  Hi guys...

  I had this posted in another question I raised yesterday... so thought that I should probably get a question by discussion

  A year after double view and month appear on the structure folders after you import the photo

  See things like

  Folder Image count

  10 2009

  2009 480 p

  If I import files with the correct creation date year etc... Why LR would create two folders with the same name...

  See you soon

  Steve

  Hi I think I've sorted it... Folder locations are the same as in

  C:\Documents and settings\stemcg\my Documents\My pictures\

  I looked at the link at the top... when I right click on the files and selecetd add a parent folder that it changed the view of annual records being next to each other for example...

  5 2010

  2010 5000

  4 2011

  2011 4096

  It separated like this

  upper part

  1996

  2000

  ....

  2009

  2010 5000

  2011 4096

  My Documents

  My photos

  2009

  ......

  5 2010

  4 2011

  I then right click on the folder with the least number of photos in there for example

  My perso\Mon pictures\2010 I selected update folder location.

  I pointed out the Selection tool in the same folder that is my perso\Mon pictures\2010. Then, he gave me a prompt to merge the files... It merged then deleted the My Pictures folder and added photos in the folder above... it looks like now

  upper part

  1996

  2000

  ....

  2009

  2010 5005

  2011 4100

  My Documents

  My photos

  2009

  ......

  The folders listed under my photos with the count in the records of the year preceding has increased in quantity... IE 2010 went from 5 000 to 5 005 photos...

  result!

  Thanks for the pointers guys...

  (one day I'll have the shot of LR!)

• Another question of restarting the MUPS

  A former Church accountant called yesterday.  His computer has been restarted.  I went through a few things, starting with LNG, then passed over.  In safe mode, he did the usual list.  After MUPS.sys, it restarts.  I tried the Safe Mode (all 3), Normal, good last known (LKGC), etc.  I then tried the advanced options.  Debugging came with the BSOD with the 0 x 0... 7B (on forums I see it and 7th regularly, 7B) where it crashes.  I ran the diags BIOS & no problem.  I tried PE of Bart, WinPE with ERD Commander, TechMaster 2006, Hiren 9.5 with reboots or BSOD.  EBCD brought me for some things, but he had problems.  She has finally found its XP SP2 CD, so I tried to make in this, but it gets to the GUI (probably around MUPS.sys) and rebooted, including safe mode.  I found Hiran 9.7 (misguided in my folder of CD), & it worked, so I just ran a quick memtest and CPUZ, then let him test the HD (HDTest or HDTune or something like that).  As he ran, I brought to the top of the box CMD typed memtest and explained how to operate when HDTest was done.

  Today, after Church, I came back with a FD & performed a running MemTest + (4.1) one pass, now 6 SpinRite is testing the drive.

  The computer is a HP Pavilion with a 2.2 GHz Dual core Intel, 4 GB DDR2, 500 GB HD (about 25 GB used, a normal installation with another recovery - 15 or 20 GB partition as I remember) I could see with EBCD & Hiran) and a M/B IPIBL-LB.  She put it in a network with a new HP Pavilion (a1640n).  I don't know which box did its accounting data on it - or if the two don't.  (I has not implemented its network, I'm just helping low-cost when his computer gives its problems the weekend & his ordinary man will then come).

  Suggestions?

  Thank you

  John

  Hello

  This problem may occur in the following scenarios.

  ·        Boot sector virus

  ·        Device driver issues

  ·        Hardware problems

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest you follow the steps mentioned in the article below.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

   

  Method 2:

  I suggest you back up the data that are present on the system and then do a format Windows XP clean installation. To back up the data that is present on the system, install a parallel installation of Windows XP and then back up the data and then perform a new installation of Windows XP.

  Follow method 4 that is listed in the article given below to perform a parallel installation of Windows XP.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307

  Once you have made the parallel installation, and then follow the steps mentioned in the article below.

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Optiplex 320 yet an another Question of Ram

  Hello

  I have an Optiplex 320 and it seems do not like this kind of ram. I tried this and several other modules I had to hang out with the exact specifications of same. My question is, what makes Hynix so special that it works with the optiplex? Is there something owner seeks the mobo?

  With the Hynix ram the machine starts fine, no problem. With the Kingston (and other brands) of PC2-5300 it don't POST and gives me the 1-3-2 beep code.

  Here's what I did to solve problems. (I've got 2 identical Optiplex 320 I did this troubleshooting)

  • Reinstall and reinstall the modules of resettlement
  • Install the latest version of the BIOS. (ending in12)
  • Delete and remove cmos
  • I tried PC2-6400
  • CUSS at it
  • Deleted graphics card
  • Attempt 1 module at a time

  Basically, what is the difference?

  Any ideas would be greatly appreciated.

  Thank you.

  Work RAM

  

  RAM does not

  

  I mentioned that I'm a huge ASUS and Corsair fan. :-)  I swear by the two.

  Corsair has a "memory Finder" page.
  See the link below.
  Corsair has done the job to see what is compatible with common systems.  Of course, they have listed Dell systems.
  That's what I used when getting memory for my 8900 XPS.

  

  Yes, the DRAM is can be a huge pain for materials developers.  "Today", most hardware designers use models tested beforehand and DRAM pre-approved and layouts.  But not all of us have this chance.  There are times when custom DRAM controllers are needed.  And someone has to do the designs which use a lot of other hardware engineers. :-)  Then, the DRAM manufacturers provide detailed hardware simulation models and precise signal integrity models.

  I'm a fan of Intel, not so much a fan of the DRAM factory.  So I look at it, it's basically like this, that the Intel chips have good tolerances.  This is the DRAM chips which vary tolerances and more.

  Also, is the "fastest" DRAM * not * always work in a system that isn't spec'd for it.  The fastest DRAM also "can carry data more quickly after the clock (one of many waiting time parameters).  So in this case, it depends if that specific DRAM contains the data a bit longer (this fine and in spec), or this memory controller specific Intel is able to work with data held not valid so that requires the Intel specification.

  Also, voltage, temperature, aging, all come into play in the electronics of the real life and tolerances.
  Then, you can see why some people say "XYZ" works in _my_ system.  But, who can * not * always be the case with each system.  It can work in 90% of the systems, and then these 10% are screwed.  So this is why * I * have different opinions on which suggests improvements.
  * I * don't want these 10%, 20%, 70%, either, to screw.

  I see the Corsair Memory recommended as work for? ~ 99.99%? of the people.  So, maybe 1 in 10,000 will be out of luck trying the upgrade?
  My _guess_ is that Dell has between a 5-sigma and sigma-6 rates of their PC and max upgrades memory failure.

  5-sigma failure rate: 0.023% (99.977 good)
  6-sigma failure rate: 0.00034% (99.99966 good)

  

• An another Question of license Windows

  I purchased a copy of Windows 7 retail and installed on a laptop computer to upgrade this laptop Windows XP.

  Unfortunately, this laptop was stolen.

  I still have the CD with Windows 7, however, and want to use it to upgrade another computer laptop Win XP.

  Question is this.

  Doesn't the person who stole my laptop stolen also my Win 7 license rights or the fact that he (or she) has stolen software makes him an illegal user of license and my rights to the license to stay with me?

  If you have proof of purchase you can get a replacement product key.
  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  You can also try Windows Genuine Advantage Support (scroll down to find your country)
  http://customercarecontacts.com/contact-Microsoft-support-phone-of-Microsoft-Corporation/
  US phone numbers: Windows 7: 1-866-530-6364
  Windows Vista: 1-866-530-6599
  Windows XP: 1-866-530-6599
  Microsoft Office: 1-866-530-6599
  All other products: 1-866-530-6599

  J W Stuart: http://www.pagestart.com

• How to add another Simulator to Eclipse

  I have bundle eclipse installed with 9800 torch Simulator. now, I want to add another Simulator. I downloaded and installed the Simulator also 9780 with os 6, but I can't choose my menu of eclipse Simulator. How can I let it slip away now where to look for the simulators?

  It is just as is the case, copy all the files of the new files installed Simulator programs to eclipse/plugin/rim.../components/simulators and restart eclipse. After that one can choose the type of device.

• Another Question regarding the IPC in the BB platform (secure process for RuntimeStore)

  In my scenario,.

  Process one will constantly be voicemails from somewhere and put it in a table in a RuntimeStore, named _store.

  B process, there is a thread T will waitFor the ID of the table in the _store. If succeeds, then copy to another location, i.e.,.

  persisting an object and then eaten after this, the thread will remove the ID of the table in the _store.

  I wonder if it is safe for both processes simultaneously access the _store.

  Wrote in the store. B is read and write to the store.

  If someone could help?  Very well appreciated.

  I am a bear with very little brain and can never remember the right way of doing things.  I'm sure that someone will take the holes in what follows and suggest the best ways and it would be fantastic.

  I think there are two issues here:

  (a) simultaneous access

  (b) persistence

  (a) the simultaneous access to an object in the persistent store are no different from any object, they are located in PersistentStore, RuntimeStore or RAM.

  Thus, for example, let's say we have a vector in PersistentStore, we use just like a queue to a single server (then only add to the tail and remove the head), with a separate 'lock' in RuntimeStore object.  Synchronize us on the lock object before we add an element, or remove an item, our access is perfectly safe

  (b) persistence

  Yes I agree, this aspect is not clear.  I always thought I want to commit an object placed partially updated, so in this example, would make the validation in the context of add or remove the treatment.

  Of course, things become a little more complicated if you start to talk about data updated in the queue, but I do not think that these problems are related to PersistentStore as a result, I think that these are issues of a general nature and there is probably many places on the web where are discussed different mechanisms to make sure that it works well.

  A few other points:

  (1) I understand that the treatment of validation is "atomic" on the BlackBerry and the "wound", so if you make an object you will persist all changes to this object. Usually, I maintain a collection that is associated with an Application for validation, points specific in the treatment of requests to ensure that the data associated with an application conform to the battery be fired immediately after a commit.

  (2) you can see updates of persistent objects, even if they are not posted.  These changes will be lost if they are not posted. So if you have a line like the one above, and two Clients add entries in the queue without committing, the server see the two entries in the queue until the battery is removed.  When the server restarts, the two went.

  Does that answer the question?

• Newbie question: installed Eclipse 3.4.0 and BlackBerry 4.5 and 4.6.1 4.7.0, only works in 4.5

  Here's what I did.

  I installed Eclipse 3.4.0 from the site Internet of Eclipse.

  I then installed the Blackberry Plugin for the Eclipse IDE.

  I then installed Companion Pack 4.7.0 4.5 and 4.6.1 in the Plugin Manager in Eclipse.

  I created a HelloWorld application by taking the HelloWorld application from the website development and cut-and-paste the code.  I went from my environment to 4.5.0 Package component and tapped "run", according to the video examples.

  Bingo!  It was working fine.  I had my HelloWorld app race, was able to get the menu, select an item and it showed me my dialog box.

  Now, whenever I go to the 4.6.1, or 4.7.0, component Package the behavior is exactly the same:

  Clean environment.

  Rebuild the application.

  Press "Run" to launch the application.

  The result?

  The Simulator starts, but the application never does.  I get a nice home screen bit and listed in the application directory.  I go to Applications (as directed by the video) and it never shows me a HelloWorld application.

  Same exact behavior in 4.7.0.

  Is there a magic button that I need to hit to make it work?  I looked on the BlackBerry site - for 5 hours - and looked for answers to this question, and I have found no resolution to it.

  Maybe it's just something stupid, but I find it really weird that I can run on 4.5.0, but 4.6.1 and 4.7.0 are completely dead in the water.

  Help!  

  Hmmmm, looks like it appears in downloads and not in Applications.  I tried it and all is well.

  This should probably be corrected in the online documentation to avoid confusion.  It confuses the heck out of me!

• Adding a RAID card to help speed up the export (and another question reader) in first Pro CC

  First of all, I read the Page Tweakers export section because that is my main concern is. First my questions, then the background and my current and proposed configurations:

  Question 1: Adding a hardware RAID controller, for example an LSI MegaRAID will sufficiently remove the burden of parity management CPU on my RAID 5 software that the CPU will jump of joy and export faster?

  Question 2: If true for above, then compare thoughts on adding smaller SSD for either a RAID 0 or less two RAID 0 volume volume complete HDD RAID 5. In other words, I think the purchase of four Samsung 850 Pro 128 GB SSD to put in a four disk volume to handle everything (projects/media, media, previews, export cache), or split it into two volumes of two disks of each and divide the tasks, or keep the idea of volume four disc and previews and exports on my drive HARD RAID 5 array.

  The 850 are valued at SEQ write: 550 / 470 MB/s so I could get around 2000 / 1500 MB/s read/write to a disk four RAID 0 or 1/2 who, if I divided in two volumes to minimize the volume of read/write at the same time, if it really matters with these SSD?

  The Tweaker page made some comments. A split is carried out the tasks between different drives, rather than a large effective RAID can really slow things down. Because SSDS are much faster than a single HARD disk, I think its more accurate than so I'm leaning towards the configuration of four discs put OS & programs on the C drive, media & projects on media on SSD (2 disks RAID 0) Cache and D (HDD RAID 5), file exchange & Previews & export on 2nd SSD RAID 0 (or combine the two RAID 0 and their functions).

  Just trying to get a point of view here, since I have not bought anything yet. Any experience/stories, I would be grateful.

  My current setup of training:

  My D drive is a software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM hard drives with CrystalDiskMark SEQ read/write of 339 / 252 MB/s.

  The C drive is 500 GB SSD (Samsung 840 (not Pro) and fact 531 / 330 MB/s.) My OS, Program Files and Page file are on C and media data/files/projects, etc. that are all about the RAID drive.

  Problem:

  Current configuration allows for smooth installation, just export seems slow, usually taking between two and two and a half times the video length to export. Thus, a 10 minute video takes 20-30 minutes for export. 15 minute video can take 30-40 minutes to export. The first 10% of the export of re-encoding takes less than a minute (seems fast), but it becomes slower when the final 10 or 20 percent may hang for several minutes as my system is running out of steam. So, where's the waste?

  I activated the hardware acceleration (because the GPU hack my GPU is not listed) and it can break through to 25% use a few times and eat up to 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is slowed down export set. The CPU can boost at 50%, but it seems either too busy.

  Our calendar is simple with two video and two audio streams (a little music and especially the voices), with simple transitions (jump cuts or cross dissolves). Sometimes, we fast correct color, so that could use the GPU? Also, given that we are filming in 1080 P 60 p and 1080 export 29.97 FPS, I think who is scaling and using the GPU. I know that without the GPU, it takes much longer. I excluded buy a faster GPU because it doesn't seem to be breaking a sweat. I just need to know if my system is a bottleneck at the level of the disk hard because I am using software RAID and my disks are slow and hardware RAID will considerably reduce the processor load so it can export more quickly.

  Our files are not huge in nature. Most of our clips are several MBs each. Total files in the project are between 5 GB and 10 GB for each video with Windows Media File export being 500 MB to 1.2 GB on average. Look using Panasonic Camcorders, so the original files are AVCHD, I think (.) MTS files?).

  Considerations:

  1. I think to buy (and future proofing) a LSI Logic MegaRAID 9361-8i is 12 Gb/s SAS and SATA (because some SSD current can exceed the standard 6 Gbps).

  2. I will not replace my current HDD RAID 5 as not in my budget to spend 6 or more large SSD. These discs are more important to me for temporary storage because I delete files saved once. I don't mind a few smaller SSD inexpensive if they can make a significant difference for editing and export.

  I can only guess my RAID HDD is slow but the CPU is burdened by parity. I guess running RAID 10 would not really help.

  My configuration:

  my configuration:

  CPU - CPU i7 - 3930K @4.5 GHz

  RAM - G.SKILL Ripjaws Z Series 32 GB (4 x 8 GB) DDR3 2133 @2000

  Motherboard - ASUS P9X79 WS LGA 2011

  GPU - Gigabyte GeForce GTX 660 OC 2 GB (performed the hack of compatibility list to activate hardware acceleration).

  Drive C - 500 GB Samsung SSD (programs and Windows 7 Pro 64-bit) 840.

  D drive - four 1 TB WD RE4 enterprise hard drives 7200 rpm in RAID 5 software

  Box - Cooler Master HAF X

  CPU fan - Cooler Master Hyper 212 EVO with 120 mm fan

  Power - series Pro Corsair AX 850 watts 80 Plus Gold

  Optical drive - Pioneer BDR - 208DBK

  Thanks in advance,

  Eric

  OK, after overload of information on everything I tried (free), which might be my answer here. I went from codecs to export. When you use Windows Media File, Premiere Pro seems chugging along much slower than when you use the h.264 (not h.264 Blu - Ray). I don't know if it's because Microsoft has found a way to break it or what. But I'm the CPU usage of 70-85% on the 2 Pass of 2 as well as the use of the memory of 40% (or 12 GB). It exported in 14 minutes. Woo - hoo. I then did a similar test using Windows Media File. It took 31 minutes to export. The CPU has spent much of his time in the 30%, especially down in the 1930s mid-1940s with spike for memory usage was only 24% to 35% and 50%. Since then, I've read how h.264 codec is 'plu' for online files. It compresses better with less compression artifacts. He seems better, etc. Well, they both seemed on the same thing for me. I play both on my TV 70 "before I could comment further. In the future, I will consider a RAID controller and upgrade the HDDs to SSDS.

• Question about Eclipse link Cache coordination

  Hello
  
  I use the Eclipse coordinating Cache link in a clustered environment. I am using the coordinating cache synchronization notifications in the cluster and logical implementation of related applications.
  
  I have a Weblogic cluster with 3 knots. My intension is that if any cache on JPA entity is modified, its postMerge(DescriptorEvent event) method should be called on all nodes in a clustered environment, except the node where the JPA entity is changed. But the postMerge() method is called on the node where the JPA entity has been changed. As a result of this postMerge() method runs the application logic, which is not necessary that the modification is done and it's an overload. I tried, I could get a property any of the DescriptorEvent/ClassDescriptor to circumvent this extra activity. I saw a difference in the Type of Session of the DescriptorEvent class. The session type in the node, where the change arrived is UnitOfWork (RepeatableWriteUnitOfWork) and all other nodes remotely is ServerSession. There are several other types of session. From now on, I used UnitOfWork as a filter to ignore the extra synchronization call on the node, where the entity is changed. But his is not consistent, sometimes on the same node, where the entity is modified, the postMerge() methos is bieng called several times with the session as a UnitOfWork and ServerSession type. My filter in the postMerge() method will fail if the session type is ServerSession.
  
  * Filter that I used in the postMerge() to ignore the activity: + if (!) () event.getSession () .isUnitOfWork ())) {+ *}
  
  another option, I've tried is MergeManager, as follows. But as is the inner class, and if the type of session is SeverSession and not UnitOfWork (RepeatableWriteUnitOfWork), this logic doesn't work. We could get the MergeManager of the ServerSession?
  * ((UnitOfWorkImpl) de.getSession () .getActiveUnitOfWork ()) .getMergeManager () .shouldMergeChangesIntoDistributedCache (); *
  
  Is there another approach I can get the call either by the local node or the remote node of the DescriptorEvent? That rely solely on the session type (UnitOfWork) may not be appropriate. Could you please help me solve the same?
  
  
  Thanks in advance!
  
  Kind regards
  Srinivas Medukonduru

  The postMerge() occurs on the source node because it must merge the changes into its cache the same as all the caches of the other server.

  You can access the ObjectChangeSet of the DescriptorEvent on the source node and check his clone using getUnitOfWorkClone(), it will be null on all remote servers.

  ---
  James: http://www.eclipselink.org

• Another question about hard drive setup

  Thank you all for the info on PC and installation material.  I have download the first CS4 trial version and it is awesome!  I have one last question? I read the rules for storage and editing platform.

  I noticed in the project settings, as there

  captured video

  Audio captured

  video excerpts

  Audio previews

  And in the preferences

  media database cache

  media cache files

  Correct me if this is incorrect

  Drive a my OS and files in project

  My second drive pagefile and media cache database and media file cache.

  Third disc captured video & audio and video previews and audio previews

  This system uses a combination of DV, AVCHD material.  I would add another hard drive?  I may be using raid 0 for the audio captured video edge.

  No problem. Especially for raid0 configuration, you can easily use the on-board raid functions. No sense getting a controller separated for this card.